Public Health Engineering Department Tender

081500 P and F of ac operated heavy duty 230 /440 Volt power contactor conforming to IS:13947-4-1/IEC:947-4-1 having provision of mechanical interlocking, auuxilary contacts, Din rail mounting type including making connections, testing etc. as required.081510 3 pole Power contactors with following AC 3 Rating081516 70 Amp081516.2 Group - 1

081200 SITC of self healing MPP/MP type shunt capacitor (banks) conforming to IS:13340-41 / IEC :831-1 and 2 in existing panel or parallel with load terminals , the capacitor shall be fitted with discharge resistors, pressure sensitive disconnector ( PSD ) and shall have dissipation factor less than 0.0025 at 50 Hz and total wattage loss less than 0.5 Watt per KVAR . including making connections with suitable capacity conductors/cables testing etc. as required.081220 Heavy duty Three phase 440 V , 50 Hz capacitor (Bank)081220.2 Group - 1

080800 SF of 110/220 V, LED (22.5 mm dia ) Indicating lamp with integral circuit, terminal block, including connection etc. as required.080801 Red/yellow/Green colour080801.3 Group - 2

081500 P and F of ac operated heavy duty 230 /440 Volt power contactor conforming to IS:13947-4-1/IEC:947-4-1 having provision of mechanical interlocking, auuxilary contacts, Din rail mounting type including making connections, testing etc. as required.081510 3 pole Power contactors with following AC 3 Rating081515 40 to 50 Amp081515.2 Group - 1

081500 P and F of ac operated heavy duty 230 /440 Volt power contactor conforming to IS:13947-4-1/IEC:947-4-1 having provision of mechanical interlocking, auuxilary contacts, Din rail mounting type including making connections, testing etc. as required.081510 3 pole Power contactors with following AC 3 Rating081513 32 Amp.081513.2 Group - 1

081500 P and F of ac operated heavy duty 230 /440 Volt power contactor conforming to IS:13947-4-1/IEC:947-4-1 having provision of mechanical interlocking, auuxilary contacts, Din rail mounting type including making connections, testing etc. as required.081510 3 pole Power contactors with following AC 3 Rating081512 13 to 25 Amp081512.2 Group - 1

080300 SF of (0-500) V range Volt meter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required.080302 Digital type080302.2 Group - 1

081700 P and F thermal over load relay with built in single phase protection and having at least 1NO and 1NC contacts, manual /auto reset facility including making connection testing etc. as required.081704 31 to 40 Amp081704.2 Group - 1

081700 P and F thermal over load relay with built in single phase protection and having at least 1NO and 1NC contacts, manual /auto reset facility including making connection testing etc. as required.081703 21 to 30 Amp081703.2 Group - 1

081700 P and F thermal over load relay with built in single phase protection and having at least 1NO and 1NC contacts, manual /auto reset facility including making connection testing etc. as required.081702 15 to 20 Amp081702.2 Group - 1

081700 P and F thermal over load relay with built in single phase protection and having at least 1NO and 1NC contacts, manual /auto reset facility including making connection testing etc. as required.081701 Up to 14 Amp081701.2 Group - 1

SITC of IP 40 3 pole current limiting Moulded case circuit breaker (MCCB) made of flame retardent and heat resistant material having following current rating short circuit breaking capacity at 440/415 V 50 Hz O/L and S/C settings as per PWD specification for electrical Works conforming to IS/IEC 60947 P 2 2003 with front face and centralised adjustable trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal and vertical mounting without any adverse effect on electrical performance suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3 having positive isolation capability, push (test) to trip trip time less then 10 ms under s/c condition Breaking capacity Ics 100% Icu. U imp 8 KV rated insulation voltage 800 V provision for UVR shunt trip earth fault trip door interlock pad lock and rotary handle including making connections with lugs and spreaders etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work refer Annexure A attached with this BSR .

E090310 With Thermal Magnetic release

E090314 200 Amp 35 kA adjustable O/L and fixed S/C setting Ics 100 % Icu

080400 SF of CT operated direct reading type Ampere meter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required.080420 Digital type080421 Below 500 A080421.2 Group - 1

6.3 Labour charges for repairing of starter at site including opening and reassembling of starter with labour charges for replacing of defective parts with new one at site.(Parts will be supplied by Depatment)

6.3.1 5 to 15 HP.

6.2 Labour charges for replacement of defective ampere meter / volt meter with new one on existing panel board in pump house./Tubewell /openwell (new voltmeter/ampere meter will be provided by department

6.1 Labour charges for removing electric fault in wiring / making connection through lugs (with the help of cramping tool) of motor pump set with starter at headworks of water supply scheme/Tubewell/ openwell including cost of insulation tape etc..