Public Health Engineering Department Tender

All kinds of soil.

Oridinary Rock Qty

Hard Rock Qty

Supplying & Installing 100 mm diameter sealed diaphragm bourdon type pressure gauge of range 0 to 10 kg. including all jointing material as per specification with safety cover.

Supply and fixing of CI Double Flanged Type Sluice Valve with required tail pleces as perAPI 594 & API 598 (revised upto date) & departmental Specifications: duly inspected & tested by the prevalling Inspeting agency of the Department as to be inspected and tested at Divisional Store. The rate includes cost of rubber gesket, nuts and bolts, excavation in all type of soils and dewatering for fixing of valves

Size 80 mm

Size 100 mm

Supply of CI dual plate type check valve and provided with metal to metal seating for raw water and with soft seating for clear water : duly inspected & tested by the prevalling Inspeting agency of the Department as to be inspected and tested at Divisional Store. The rate includes cost of rubber gesket, nuts and bolts, excavation in all type of soils and dewatering for fixing of valves

Size 100 mm

Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifitions and direction of Engineer-in-charge.

MS pipe specials upto 600mm dia ( with minimum 5mm thickness sheet)

Demolishing cement concrete including disposal of material within 50 mtr lead. 1:3:6 or richer mix

Providing and laying in position cement concrete including curing compaction etc . Complete in specified grade excluding the cost of centering and shuttering All work up to plinth level.

M15 grade Nominal Mix ( with graded stone aggregate 20mm nominal size)

Supply & installation of three phase 5-satr rated submersible pumping motor pump sets made of Stainless Steel body as per IS:8034-1989 of approved make K.S.B./SHAKTI/KBL/ CROMPTION/ AROMA or equivalent only, making connection suitable for T.W. The job includes , installation of complete fitting & accessories with riser pipes, jointing of electrical cables & other connection making switch board electrical connection all labour for testing of submersible pump set and supply of water to water mains, complete in all respect including 2 year guarantee after date of commissioning.

V-6 above 5.5 KW upto 10.0 KW

Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventor, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. The panel should have space for energy meter (supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 guage M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg's length 18" and double door including in built locking system. The legs should be embedded in M-15 cement concrete plat form.The size of CC plateform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply.

Suitable for upto 7.5 HP Motor Pump Set