Back
  1. Home/
  2. Indian Tenders/
  3. Rajasthan Tenders/
  4. Public Health Engineering Department/
  5. Overview

Public Health Engineering Department Tender

If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.

Public Health Engineering Department - PHED Tender

Works
Civil And Construction
Water Storage And Supply
Eprocure
Udaipur, Rajasthan
Opening Date14 Oct 2024
Closing Date4 Nov 2024
Tender Amount₹ 21,19,27,000 
Notes
Download

Costs

  • EMD

    ₹ 42,38,540

  • Document Cost

    ₹ 25,000

  • Tender Fee

    ₹ 2,500

Summary

Work Of Retrofitting Of 22 And 24 Villages Of Badgaon Block From Bageri Ka Naka Dam Of District Rajsamand And Amarchandiya Dam Of District Udaipur Under Jjm

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Request Call Back

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended upto date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in- charge.(excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.

-

-

-

... More
100 mm dia

455

1262

574210

... More
150 mm dia

1961

1795

3519995

... More
200 mm dia

883

2202

1944366

... More
250 mm dia

389

2851

1109039

... More
Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work). Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply of pipe shall be in straight length in 6/12 M. HDPE PE-100 PN-6

-

-

-

... More
75 mm dia

86589

160

13854240

... More
90 mm dia

9472

228

2159616

... More
110 mm dia

4607

381

1755267

... More
Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by butt fusion/ electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work). Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply of pipe shall be in straight length in 6/12 M. HDPE PE-100 PN-6

-

-

-

... More
125 mm dia

8520

494

4208880

... More
140 mm dia

7183

615

4417545

... More
160 mm dia

11020

773

8518460

... More
180 mm dia

6706

970

6504820

... More
Providing and fixing double flanged ISI marked DI Class K-9 pipes as per IS:8329-2000 (amended up to date), as vertical pipes for RCC Reservoirs including specials required such as duck foot bend, bend, tee etc. providing clamps at every 3 mtr, jointing materials such as nuts, bolt, rubber packing, hydraulic testing etc. complete in all respect up to and from valve chamber as per direction of EIC, Technical Specification and Scope of work.

-

-

-

... More
100 mm dia

129.8

1947

252720.6

... More
150 mm dia

136.1

2801

381216.1

... More
200 mm dia

113.8

3664

416963.2

... More
250 mm dia

57.5

4942

284165

... More
Manufacturing, supplying ,lowering, laying and jointing in position to correct line spirally welded SAW/Fabricated MS Pipe having bevelled end plates / coils, confirming to IS 3589-2001 or its latest revision/ amendments, for following thickness and inside diameter, including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.), field joints, satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge; (excluding earthwork, internal lining and outer coating). Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. For Pump & ESR Piping

-

-

-

... More
100 mm dia 6.0 mm thick

57

1913

109041

... More
150 mm dia 6.0 mm thick

48

2816

135168

... More
200 mm dia 6.0 mm thick

19

3479

66101

... More
Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.

-

-

-

... More
In all types of Soils

-

-

-

... More
upto 1.5 m

40123.8

172

6901292.74

... More
In Soft Rock

-

-

-

... More
upto 1.5 m

8597.95

322

2768541.19

... More
In Hard Rock (Blasting Probihited)

-

-

-

... More
upto 1.5 m

8597.95

674

5795021

... More
Providing, lowering, aligning, fixing in position and Jointing in pipe line, DI Body Flanged End Tamper proof Kinetic Air Valve of approved makes of following pressure rating and dia and as per following specifications: Governing standard - AWWA C512/ IS:14845:2000(amended up to date) Body, High pressure cover , Low pressure cover, Cowl and Joint support ring - Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865, FloatLP ball & HP ball : AISI 304 stainless Steel, Seat ring & Gasket - EPDM/NBR ,HP Orifice & HP orifice plug : Bronze/ SS ,Bush: Bronze ,Flanges as per IS/ BS, Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body & cover inside and outside .Fasteners - CS/ Galvanised steel, Outlet of big orifice will have a screen to prevent Tamper of float, with DI metal seated D/F Non rising stem. Sluice Valves as per (IS: 14846 amended upto date) PN 1.6 ratings. Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge. Note: Rates are exclusive of connecting tee, pipe piece and earth work Class PN 1.6

-

-

-

... More
40 mm dia

1

11225

11225

... More
Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS (AISI 316 or equivalent) Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Manually Operated Resilient Seated Sluice Valves of Class PN 1.6

-

-

-

... More
80 mm dia

39

7877

307203

... More
100 mm dia

16

9960

159360

... More
125 mm dia

25

14730

368250

... More
150 mm dia

18

16473

296514

... More
200 mm dia

10

25341

253410

... More
250 mm dia

3

42053

126159

... More
Providing, lowering, laying, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning Technical Specifications and as per direction of Engineer. Class PN 1.0

-

-

-

... More
80 mm dia

39

2715

105885

... More
100 mm dia

16

3160

50560

... More
125 mm dia

25

4131

103275

... More
150 mm dia

18

4964

89352

... More
200 mm dia

10

7383

73830

... More
250 mm dia

3

10111

30333

... More
Providing, lowering, laying, aligning, fixing in position and jointing MS dismantling joint (Fabricated Steel) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning Technical Specifications and as per direction of Engineer.

-

-

-

... More
100 mm dia

12

4423

53076

... More
150 mm dia

2

8262

16524

... More
Providing, lowering, aligning, fixing in position in pipe line, DI D/F resilient seated (soft seated) short body pattern type double eccentric Butterfly valves of approved make of following class & dia complete confirming to BS EN 593/ BS 5155/ IS 13095/1991 amended up to date and of following specifications: Body, disc and end cover of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Face to face dimensions as per DIN 3202 F4/ IS 13095 Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on both body and disc inside and outside. Disc seal ring of EPDM/ Neoprene (food grade quality) and disc seal retaining ring of SS/CS. Shaft of SS- AISI- 304/316 & shaft bearings- bronze/ PTET or Teflon with EPDM/NBR "O "ring seal, Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvenised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.

-

-

-

... More
100 mm dia

12

43108

517296

... More
150 mm dia

4

49602

198408

... More
Providing, lowering, aligning, fixing in position in pipe line, DI D/F resilient seated (soft seated) short body pattern type double eccentric Butterfly valves of approved make of following class & dia complete confirming to BS EN 593/ BS 5155/ IS 13095/1991 amended up to date and of following specifications: Body, disc and end cover of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Face to face dimensions as per DIN 3202 F4/ IS 13095 Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on both body and disc inside and outside. Disc seal ring of EPDM/ Neoprene (food grade quality) and disc seal retaining ring of SS/CS. Shaft of SS- AISI- 304/316 & shaft bearings- bronze/ PTET or Teflon with EPDM/NBR "O "ring seal, Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvenised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. At Individual Delivery pipe Note: Rates are exclusive of tail piece/ dismantling joints and earth work. Class PN 1.6, Motorised Operated

-

-

-

... More
150 mm dia

4

75700

302800

... More
Construction of brick masonry valve chamber for different type of valves with 75 class designation brick work in cement mortar 1:4 (1cement : 4 coarse sand), wall 230mm thick, top cover slab 150mm thick RCC M20 grade (1:1½:3 (1 Cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size) with C.I. surface box with hinged cover 100x100x75mm (deep) including earthwork excavation, 100mm thick leveling course of PCC M10 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) including cost of steel reinforcement not less than 80kg per cum CC, form work, proper curing complete in all respect as per standard specifications and drawings and as directed by Engineer.

-

-

-

... More
60cm x 60cm x 75cm (depth) for 80/100/125/150 mm dia valve

65

7660

497900

... More
90cm x 90cm x 100cm (depth) for 200/250/300 mm dia valve

22

12900

283800

... More
Construction of Flow meter chamber

-

-

-

... More
Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils

-

-

-

... More
upto 1.5 mtrs

70.36

164

11539.04

... More
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level using Crusher broken aggregate. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

3.43

2896

9939.07

... More
Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. M20 Grade nominal mix with graded stone aggregate 20 mm nominal size

15.64

4872

76198.08

... More
Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc.

155.04

161

24961.44

... More
Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code)

410

72

29520

... More
Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement for :- M20 Grade

3.73

5244

19560.12

... More
Providing, lowering, aligning and fixing in position DI D/F Diaphragm type Pressure Reducing / Flow Control Valve of approved make of following Pressure rating & dia complete and of following specifications: Body & Bonet - Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or ASTM A 536, Diaphragm and Resilient seal disc - Flexible, non-wicking nylon fabric reinforced synthetic elastomer -Buna-N / EPDM (FDA / WRAS approved), Body Seat Ring - Cast stainless steel ASTM- A 351 GR. CF8M / AISI- 316, raised, replaceable inline & onsite Stem - Stainless Steel, AISI-316, raised, replaceable inline & onsite Spring & Bearing bush- Stainless Steel, AISI-316 ,Disc guide, disc retainer & diaphragm washer - Stainless Steel, AISI-304/ 316/Bronze ,Seal- EPDM/ NBR ,Pilot Body- Stainless Steel, AISI-304/ CF8 or Brass Tubing - Stainless Steel, AISI-304 / Copper ,Solenoid Valve- Stainless Steel, AISI-316 ,Throttling plug - Stainless Steel, AISI-304, Nut- Bolts - SS Face to Face- as per ANSI B 16.1/ EN 558-1 and Flange ends should be as per ANSI B-16.5, Class 150 and Class 300/ EN-1092-2. nsersion rubber of black EPDM 6mm thick Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied both inside and outside. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning as per Technical Specification & as per direction of Engineer-In- Charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.

-

-

-

... More
80 mm diameter

3

98840

296520

... More
Construction of Village Transfer Chambers

-

-

-

... More
Earthwork in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr, including taking out the excavated soil and depositing and refilling Jhiri with watering and ramming and disposal of surplus excavated soil as directed with in lead of 50 mtr. All kind of soil

-

-

-

... More
0-1.5 m

446.16

164

73170.24

... More
1.5 - 3.0 m

38.88

178

6920.64

... More
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix (with graded stone aggregate 20mm nominal size).

24.24

3411

82682.64

... More
Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix (with graded stone aggregate 20 mm nominal size)

52.8

4872

257241.6

... More
Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M20 grade Nominal Mix / Design Mix

31.2

5372

167606.4

... More
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level using crusher broken aggregate M20 grade Nominal Mix with graded stone aggregate 20mm nominal size)

9.6

4275

41040

... More
Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) Thermo-mechanically Treated bars (Conforming of relevent IS code)

6594

72

474768

... More
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 grade Nominal Mix (with graded stone aggregate 20mm nominal size).

2.4

3802

9124.8

... More
Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc.

247.92

161

39915.12

... More
Walls (any thickness) including attached pilasters, buttresses plinth and string course.

84.96

282

23958.72

... More
Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.

123.84

223

27616.32

... More
Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:

70.08

2192

153615.36

... More
Brick masonary in foundation and plinth with bricks of class designation 75 in Cement mortar 1:6 (1 cement : 6 coarse sand) in super structure upto third storey

50.88

3864

196600.32

... More
Plaster on new surface on wall in cement sand mortar 1:3 including racking of joints etc. complete fine finish :

879.36

187

164440.32

... More
Ready made steel door with necessary hinges, lugs and glazing clips excluding other fittings & their fixing

30.24

1943

58756.32

... More
CI Steps / MS

120

121

14520

... More
P & F 60 cm. wide M.S. ladder in open well made of flat iron 32×5mm and 10mm dia bars @ 200mm c/c with angle iron hold fasts at suitable interval complete as per drawing.

67.44

206

13892.64

... More
White washing with lime to give an even shade including all scaffolding:

879.36

15

13190.4

... More
5 MM Thick MS plate with looking arrangement including supplying and fixing

339.12

122

41372.64

... More
SITC of Battery powered ultrasonic water meters, Transit time ultrasonic technology for Accuracy and reliable metering, No moving parts, Plug in replacement to existing bulk water meters, Unique Ultrasonic design doesn't measure air and hence no incorrect customer customer billing, Rugged mechanical design - Submersible (IP68), Measurement under Submerged conditions, Battery powered - 6 years life expectancy, Working pressure - 16 Kg/sqcm, Turn down ratio - better than 1:300, Liquid Working temperature - Water 60 degree C, Bi directional flow measurement, AMR - Remote flow monitoring through GSM/RF, EMI/RFI protection, Ambient operational temperature: -25°C to +60 °C, Programmable multi line LCD display, In built data logger for tracking the history.

-

-

-

... More
80 mm dia

6

64000

384000

... More
100 mm dia

18

73728

1327104

... More
Dismantling of flexible pavement for pipe line and chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work.

-

-

-

... More
Bituminous courses

996.25

362

360642.5

... More
Granular courses

1246.45

259

322830.55

... More
Dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work.

2078.95

653

1357554.35

... More
Providing and laying in position cement concrete M10 grade nominal mix 1:3:6 (1 Cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work.

832.5

4033

3357472.5

... More
Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work.

-

-

-

... More
M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).

1246.45

5312

6621142.4

... More
Providing, laying, spreading and compacting of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per MoRT&H specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion.

-

-

-

... More
Grading - II Material

622.97

1040

647889.84

... More
Providing laying, spreading and compacting stone aggregates of specific sizes as per Table 400-7 to Water Bound Macadam specification including spreading in uniform thickness; hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of screening (Table 400-8) binding materials to fill up the interstices of coarse aggregates, watering (with water browser) and compacting to required density, making necessary earthen bund to protect edges as per clause 404 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion complete.

-

-

-

... More
Crusher broken - Grade-II (63-45mm)

622.97

1320

822321.72

... More
Providing and laying 50-75 mm compacted thick design mix (approved by Engineer) Dense Bituminous Macadam on prepared surface with specified graded crushed aggregates as per Table 500- 9, 500-10 with bitumen binder set (including cost of anti-stripping compound wherever required) for base/ binder course including loading of material with F.E. loader, heating and mixing of stone aggregate, filler and bitumen in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control as per clause 504.3.5 to the required level and grade, compacting by power rollers and vibratory rollers or 150 to 250 KN pneumatic tyred roller with TP = 0.7 Mpa to achieve the desired density (approximately 2.3 tonne/cum) complete as per clause 507 of MoRT&H specification but excluding primer/tack coat, including all material, labour, machinery, lighting, guarding and maintenance of diversion.

-

-

-

... More
Grade-II with Bitumen VG-grade 30 @ 4.25 %, lime filler @ 2% (percent by weight of total mix)

664.52

6050

4020327.85

... More
Providing and laying 30-45 mm compacted thickness Bituminous Concrete as per design mix (approved by Engineer) on prepared surface with specified grade stone aggregate as per Table - 500-18 with bitumen for wearing course including loading of aggregate with F.E. loader and hot mixing of stone aggregate and bitumen (including cost of anti-stripping compound wherever required) in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensing device (as per clause 504-3.5) to the required level and grade and compacting by power rollers and vibratory rollers or 150 to 250 KN pneumatic tyred roller with TP = 0.7 Mpa, to achieve the desired density complete as per clause 509 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding primer/tack coat.

-

-

-

... More
Grade-II with Bitumen VG-grade 30 @ 6% (percent by weight of total mix)

332.26

8070

2681366.45

... More
Providing Household Tap Connection as per technical specification and approved drawing and as per relevant IS code (amended up to date) from HDPE pipe line up to consumer meter/premises by using electro fusion saddle piece (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including electrofusion saddle piece, gunmetal ferrule 4.0 mm , GM Full-way Valve (IS:778 Mark) or wheel valve and specials, below ground level 20 mm nominal dia MDPE pipe PE 80 PN 16 as per ISO 4427 / 20 mm nominal dia PPR-C (Three layered) pipe PN16 SDR 7.4 (IS:15801:2008) (ISI mark) for and above ground level using 20 mm dia PPR-C pipe with standard PPR fittings/ 15 mm dia GI pipes with fittings in the premises for fixing a tap / meterbox (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . The service line should be laid at least 45 cm below ground level. Note: Road cut and restoration is not part of this item and paid seperately.

-

-

-

... More
For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr.

5519

1786

9856934

... More
P& F Bib cock (IS : 8931 mark), superior quality of approved make , brss 400 gm, 15 mm nominal bore.

5519

271

1495649

... More
Road cutting for house hold service connection in minimum trench width whereever road crossing is required. Road cutting of cement concrete,WBM, Black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with Cement concrete with PCC M-10 and CC M-30 grade as per specification and direction of Engineer in charge.

9934.2

172

1708682.4

... More
Add extra over item no 1.21 & 1.22 for providing 20 mm PE 80 PN 16 as per ISO 4427 MDPE pipe including excavation, providing, laying & jointing of service line above 5.00 mtr.

9934.2

40

397368

... More
Construction of Pump house of required size suitable for installation of maximum 4 no. monoblock pump sets as per approved GA drawing, scope of work and technical specification complete work in all respect including electrical works for lighting and fans, rain water drainage. The plinth area of pump house shall be area of measurement.

77

17485

1346345

... More
Providing, installation, testing, trial run and commissioning of the following, as per specifications

-

-

-

... More
Providing, installation, testing and commissioning of Submerged Centrifugal Pump sets with motor 4 pole sychronised speed of 1500 rpm ( water immersed, dry air filled, class "F" insulated TEWC motor integrally mounted on volute casing pump sets for drinking water ) 3 phase, +/- 3%, 415 volt +/- 10%, along with suitable foundation/ installation device and with 10 mtr cable, material of construction of impeller SS, casing (volute) CI, wearing ring SS, etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions mentioned in TD.

-

-

-

... More
Proposed Intake at Amarchandiya to Proposed WTP at Amarchandiya route 18.86 LPS / 42 m head/15 KW (1W+1S)

2

210139

420278

... More
Providing, installation, testing, trial run and commissioning of the following, as per specifications

-

-

-

... More
Supply, erection, testing and commissioning of pumps and motors of approved duty conditions as per scope of work and specifications given in the tender document (Horizontal Centrifugal Split Casting pumps)

-

-

-

... More
Proposed WTP at Amarchandiya to Pro. OHSR wagela Ka Gurha, Pro. OHSR WTP at Amarchandiya, Pro. OHSR karni Kheda, Ext OHSR WAS, Pro. OHSR Hirawaton Ki Bhagal route 17.41 LPS / 95 m head/32 KW (1W + 1S)

64

4950

316800

... More
Tula PH to Pro. OHSR Maroowas & Pro. OHSR Waghela Ka Gurha route 12.73 LPS / 99 m head/24 KW (1W + 1S)

48

4950

237600

... More
Providing, installation, testing and commissioning of Centrifugal Monoblock pump set conforming to IS 9079 , 2 pole motor operating at syncronised speed of 3000 RPM with requisite MOC impeller, priming funnel, cock, suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply. Motor shall be TEFC type and Pump set shall be suitable for working at various discharge and head requirements as per scope of work. Pump shall be erected on C.C. foundation / cross channels / RSJ frame block with suitable foundation bolts grouted in C.C. foundation block etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions mentioned in TD.

-

-

-

... More
2.2 KW (3.0 HP)

6

29371

176226

... More
SITC DOL Starter type LT Panel of following rating, all switchgears are of PHED approved makes, CRCA sheet of Panel enclosure is of TATA/ Essar 1.6mm/ 2.0mm thick duly Electrostatic Powder Coated with angle frame including other ancillaries ( Insulators, Acrylic Sheet , Baklight Sheet, Hardware, Wire, Name Plates, Lugs, Pvc Channel , Mcb Chanel , Lock, Hing , Bidding , Connectors, Netural Links , Sprial , Saddle & Packing Material ) etc. complete as per Technical Specifications and as per direction of Engineer-In-Charge.

-

-

-

... More
DOL STARTER 2.2 KW (3 HP)- : For 2 motors (1 W+ 1S) I/C - MCB 25A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 30/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and O/G- MCB 16A ,TP, 10 KA, C Curve (2), Power Cont 9A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (4-6A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Priventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 2 Kvar (2)

3

45061

135183

... More
SITC STAR DELTA Starter type LT Panel of following rating: all switchgears are of PHED approved makes, CRCA sheet of Panel enclosure is of TATA/ Essar 1.6mm/ 2.0mm thick duly Electrostatic Powder Coated with angle frame including other ancillaries ( Insulators, Acrylic Sheet , Baklight Sheet, Hardware, Wire, Name Plates, Lugs, Pvc Channel , Mcb Chanel , Lock, Hing , Bidding , Connectors, Netural Links , Sprial , Saddle & Packing Material ) etc. and 100A/ 125A ,TPN, Aluminum Bus Bar with Colour coated heat shrinkage sleeves complete as per Technical Specifications and as per direction of Engineer-In-Charge.

-

-

-

... More
STAR DELTA STARTER 15.0 KW (20.0 HP) : For 2 motors (1 W+ 1S) I/C- MCCB 100A TPN 25 KA With T/M Based Over Current & Short Circuit Protection (1),Spreaders (2),Extended Rotary Handle (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 100/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and O/G- MCCB 63A TPN 25 KA With T/M Based Over Current & Short Circuit Protection (2), Power Cont 32A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (12-18A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Priventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 7.5Kvar (2), S/D Timer(2)

1

91403

91403

... More
Providing, installation, testing and commissioning of following Stain less steel AISI 304 Expansion bellows of 10/16 bar rating with tie rods as per technical specifications and layout drawings including jointing material like nuts, bolts, rubber gaskets etc. complete in all respect as per technical specification and direction of Engineer In-Charge.

-

-

-

... More
150 mm dia

6

9866

59196

... More
SITC of D/F Full bore type Electromagnetic Flow Meter of approved make of following dia and specifications complete: Media : Water (Raw/ Chlorinated) , Pressure : up to 1.5MPa, Process temp: - 50 deg C, Flow/Meter Tube : SS 304, Electrode : SS AISI 316L / Hastelloy C276/ Tantalum, Lining Material : Hard Rubber/ Neoprene / Poly-urethane (PU) , Flange : SS / CS, Flange Standard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Cast Aluminium, with anticorrosive paint & provide completely sealed (leak proof) construction as per requirement of IEC 60529, Accuracy : ± 0.5 % M.V.- velocity 0.3 to 10 m/s, Transmitter/ signal convertor Enclosure : Die Cast Aluminium, Power Supply : 80-240 V AC - 50Hz, Output 1 : 4-20 mA, Output 2: Pulse, Communication Output : RS 485/ Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parameters and totalizer value during power failure, Protection category- IP 68 for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, if required, and all materials required for making connection with existing pipeline including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In-Charge. Note: Rates are exclusive of tail piece / dismantling joints and earth work.

-

-

-

... More
150 mm dia

2

125776

251552

... More
SITC of Ultrasonic Level Transmitter suitable for measuring water level in reservoir, powered by solar panel with minimum 48 power back up or internal installed battery ( 5 years battery life with replacement warranty), with out put as GSM/GPRS + data logger , Sensor Material: PP, accuracy +/_ 0.2 %, as per detailed Technical specification, scope of work and direction of Engineer in charge.

-

-

-

... More
Measuring range 0.0 to 6.0 mtr

4

113050

452200

... More
Providing, lowering, aligning, fixing in position in pipe line, DI double flanged resilient seated Dual plate check valave of approved make of following Pressure rating & dia complete, as per API: 594/ API: 598 and of following specifications: Body & Bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Disc / plates - SG-400/12 or CF-8M,Face to face dimensions as per API: 594 , Flanges Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body and cover inside and outside . Disc seal ring of EPDM/ Neoprene (food grade quality) and disc seal retaining ring of SS/CS. Shaft of SS- AISI- 304/410 , Hinge SS AISI 316/304,Spring SS AISI 316/304,Bonnet Gasket EPDM ,Bush- Brass with EPDM/NBR "O "ring seal, Nut-Bolt confirming to IS:1363 and IS: 1367 (galvenised steel) , Insersion rubber of black EPDM 6mm thick .Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.

-

-

-

... More
100 mm dia

6

11519

69114

... More
150 mm dia

4

18052

72208

... More
Glycerine filled pressure gauges (0-10 kg)

4

1280

5120

... More
SITC of Soft Starters with panel supplied by manufacturer conforming to applicable standards with logic inputs & outputs, relay outputs and analogue outputs, plug in I/O connections, display of electrical parameters, state of load & operating time, RS 485 serial link for connections to Modbus.

-

-

-

... More
37 KW

2

100643

201286

... More
Plate Earthing as per IS:3043 with copper Earth plate of size 600mm x 600mm x 3.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer, nipple ,wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required.

-

-

-

... More
For LT Panel & motors

2

5500

11000

... More
Supply, installation, testing and commissioning of MNRE approved Grid tied Solar Panels with inverter, meter, cable etc. suitable for Rooftop installation as well as Utility Scale Solar Power Projects with 25 years of Linear Generation warranty. Work includes designing of solar panel area and MS frame and foundation on ground/roof of Pump house or CWR, showing arrangement of panel in available space, installation of PV module on MS frame as per approved design and drawings. Mounting structure shall be suitably designed to withstand wind velocity up to 150km/hr. Grid Tie Transformer less inverters, Multiple independent MPPTs, Peak efficiency of 98%. Connect up to multiple strings PV arrays, Easy & fast connection, Built-in string-level monitoring, IP65 protection level, Wi-Fi / internet based remote monitoring with 5 years warranty. All cabling up to panel and metre, earthing etc. required accessories and taxes are inclusive. The work shall be executed as per detailed technical specifications, approved drawing and direction of Engineer in Charge. Note: There shall be 5 year service warranty for panel, inverter, meter, cable etc. and suitable provision shall be included in tender document.

6600

57

376200

... More
Construction and commissioning of RCC INTZE type Over Head Service Reservoir of following capacity and staging as per the Scope of work and Technical specifications, consisting of the following main activities: -

-

-

-

... More
a) Topographic survey, preparation of site contour plan, conducting SBC test and its approval from department before construction. Submission and approval of concrete mix design and water quality test report for water to be used in construction. b) Excavation in all types of soil, PCC below foundation, all RCC Work, Plinth protection all around the structure including all material, labour, shuttering, scaffolding etc. c) OHSR shall be provided with adequate plinth protection all around the structure in a width starting from edge of structure at GL and extending at least up to 1.0m beyond the edge of outer most projection of OHSR. The plinth protection shall consist of 150mm thick PCC in M-15 grade concrete laid over 150mm thick layer of compacted soil. d) Providing and applying two coats of food grade epoxy paint on the inside surface on the top dome, edge beam and 600 mm height of the vertical wall. e) Conducting successfully hydro test and water tightness test as per I.S. code. f) Providing and applying three coats of anti-carbonation paint on the top surface of the Top Dome. g) Providing and applying three coats of cement-based paint on the external surface of the container, balcony, cone wall, columns & beams etc.. h) Providing and fixing SS-304 ventilator, SS 304 manhole frame and cover and SS-304 ladder from top dome/Slab to bottom dome/Slab inside container. i) Providing and fixing of MS section ladder from the last landing to balcony having railing all around it and MS ladder with safety cage from balcony to top dome/slab. j) Providing and fixing water level indicator (float type).

-

-

-

... More
k) Providing and fixing of hand railing all around the balcony, top dome and staircase consisting of 25mm diameter Class-B GI pipe in two rows and 1000 mm high, 50X50X6mm angle iron vertical post at a maximum spacing of 1500mm centres. l) All MS parts to be painted with two coats of the enamel paint over the primer coat of red oxide. m) Providing and fixing of 150mm wide PVC water bar for the construction joints in the container (vertical wall & cone wall). n) Providing one Aluminium portable ladder of appropriate length to access first landing (3.5 to 4.5m above GL) from ground. o) Lighting arrestor consisting of providing and fixing of 2 Nos. of chemical earthing and connecting it to the conical cover of SS ventilator with two separate GI strips of 50mmX3mm. p) CI/DI puddle collar shall be fixed in the bottom dome/ slab for connecting inlet, outlet, overflow and washout pipe of the reservoir. q) Painting the name of the scheme and other details on the reservoir, and any other work related to structure as per the directions of Engineer-in- Charge, Technical Specification and Scope of Work. r) Inlet, outlet, overflow, washout pipes and valves are not included in this work, provision for the same shall be taken separately.

-

-

-

... More
Rates for RCC OHSR,SBC 10 T/sqm, SEISMIC ZONE-II & STAGING 20 M

-

-

-

... More
200 KL, staging Height 20 m (1 No)

200000

18

3648000

... More
250 KL, staging Height 20 m (1 Nos)

250000

17

4340000

... More
300 KL, staging Height 20 m (1 Nos.)

300000

16

5049000

... More
400 KL, staging Height 20 m (1 No.)

400000

14

5976000

... More
Providing and fixing of flanged/ plain ended MS special of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depth in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge.

-

-

-

... More
MS pipe specials up to 600mm dia (with minimum 5mm thickness sheet)

3304.02

122

403090.44

... More
Construction of boundary wall of Brick/ stone masonary as per enclosed GA drawing, scope of work and technical specifications complete work in all respect. Brief details of boundary wall parameter is as below: 1. Depth of foundation- 900 mm. 2. PCC in M-10, width -900 mm and thickness 100 mm, 3. Stone masonary in CM: 1:6 section of foundation above PCC, 600 mm (W )x 450 mm (D) and 450 mm (W) x 450 mm (D) 4. Superstructure work: Stone masonary in CM: 1:6, W-300, height-1650 mm,/ Brick work in CM: 1:6 W-230 mm, height- 1650 mm. 5. Cement mortar pointing on Stone masonary and cement mortar plaster 20 mm thick on brick masonary in CM 1:6. 6. Expansion joint shall be on every 30 mtr. 7. On top of wall there shall be CC Coping 75 mm thick (1:2:4) shall be provided. 8. Pillar for main gate 350x350 mm in size is part of boundary wall. 9. Cement paint of approved colour in 3 coat shall be done.

480

5017

2408160

... More
Providing and fixing steel, gate, grating and grills made of angles, tees, square bars, flats or black pipe with hold fast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide and two coat of enamal paints.

1400

104

145600

... More
Design, construction, execution, testing, commissioning of Rapid Gravity filter treatment plant including all relavant civil, mechanical, electrical, instrumentation, automization and SCADA works and stores along with ancillary civil works as defined in scope (including PAC store etc.,) it includes chlorination system, recirculation system and sludge disposal system

1.6

3300000

5280000

... More
Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter.

-

-

-

... More
0 to 1.5 m

373.27

110

41059.52

... More
1.5 to 3 m

373.27

127

47517.06

... More
3 to 4.5 m

373.27

144

53974.6

... More
4.5 to 6 m

373.27

161

60432.14

... More
Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available :

-

-

-

... More
Ordinary rock

-

-

-

... More
6 to 7.5 m

373.27

271

101155.72

... More
7.5 to 9 m

373.27

296

110487.43

... More
9 to 10.5 m

373.27

321

119819.13

... More
Hard rock (requiring blasting) useful material 30%

-

-

-

... More
10.5 to 11 m

124.42

346

43050.28

... More
Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement for :-

-

-

-

... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.

-

-

-

... More
M25 grade Design Mix

1895.72

6172

11700395.66

... More
Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with wooden members and removal of formwork for upto floor three level for :

-

-

-

... More
Walls (any thickness) including attached pilasters, buttresses plinth and string course.

2695.32

166

447423.43

... More
Add extra for shuttering in circular work in plan up to dia 10m over item Nos. 4.7.1 to 4.7.2

2695.32

19

53232.61

... More
Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level.

-

-

-

... More
Thermo-mechanically Treated bars (Conforming of relevent IS code)

159553.39

72

11487843.79

... More
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.

-

-

-

... More
M15 grade Nominal Mix (with graded stone aggregate 20mm nominal size).

253.02

3895

985503.51

... More
Filling in plinth with river sand under floors including watering ramming consolidating and dressing complete including cost of sand

221.31

746

165093.95

... More
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.

-

-

-

... More
M10 grade Nominal Mix (with graded stone aggregate 20mm nominal size).

5.67

3551

20150.16

... More
Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement for :-

-

-

-

... More
Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases

17.02

5197

88471.16

... More
Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement for :-

-

-

-

... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.

18.05

5173

93362.3

... More
Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases

-

-

-

... More
M20 grade Nominal Mix

81.7

5197

424583.47

... More
Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with wooden members and removal of formwork for upto floor three level for :

-

-

-

... More
Columns, pillars, posts and struts etc.

150.4

204

30681.6

... More
Suspended floors, roofs landings staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam etc.

423.73

216

91525.99

... More
Add extra for shuttering in circular work in plan up to dia 10m over item Nos. 4.7.1 to 4.7.2

423.73

19

8368.7

... More
Brick masonry in foundation and plinth with bricks of class designation 75 in :

-

-

-

... More
Cement mortar 1 : 4 (1 cement : 4 coarse sand)

79.79

3763

300233.93

... More
Add extra over item No.5.1 for brick work in super structure upto third storey.

79.79

193

15398.66

... More
Providing and fixing flush door shutters non decorative type (hello core construction) with internel frame of Ist grade wood having styles and top rails of 100mm wodth & bottom and lockrails of 150mm width with 3 nos cross battens of 50mm thick width and 12nos 50mm vertial moddle member throughtlength using 4mm thick commercial ply on both faces

-

-

-

... More
of shutters & 6 mm thick beading of respective wood using withapproved steel fitting as per annexure A 30mm thick (P No B-8/83 Item No 8.20.1)

14.1

2190

30879

... More
Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :

16

2060

32960

... More
Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :

-

-

-

... More
20mm thick .

53.03

166

8802.41

... More
Bored cast-in-situ R.C.C. pile with cutting / Drilling for anchoring of pile into rocks wherever firm rocky strata is available, shall be done upto desired depth (minimum 1.50 m) as per drawings, specifications and as directed by Engineer. Bore hole shall be cleaned properly before concreting. No, distinction shall be made for penetration through hard rock or rock socketing with design mix concrete (M-35) using batching plant, transit mixer and concrete pump excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m. as per clause 1100, 1600 & 1700 of MoRT&H Specification including all material, labour and machinery.

-

-

-

... More
1200 mm Dia For Bridge deck

120

14100

1692000

... More
Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level.

-

-

-

... More
Thermo-mechanically Treated bars (Conforming of relevent IS code)

10653.77

72

767071.37

... More
Plie load testing on single vertical piles in accordance with IS 2911 (Part IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per direction of Engineer and as per clause 1100 of MoRT&H specification including all labour, material, machinery.

-

-

-

... More
Initial and routine vertical load test

33.91

303

10275.34

... More
Lateral load test

33.91

6050

205167.6

... More
Non destructive Integrated testing of cast- in-situ pile using pile deriving analyzer or equivalent as detailed in specification and as approved by Engineer.

10

132

1320

... More
Providing and arranging dynamic load test for checking the load bearing capacity of pile as detailed in specification and as approved by Engineer as per ASTM D4945 including of analysis and report submission including all labour, material, machinary. This include preparation of hammer, crane, build up of pile head, plywood, steel plates etc.

10

132

1320

... More
Providing, arranging and conducting sonic logging test on RC bored piles using cross holes sonic logging analyzer and submission of report.

10

132

1320

... More
Structural steel work riveted or bolted in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5 mtr height.

-

-

-

... More
In flats, tees, angles and channels.

45200

85

3842000

... More
Ductile Iron Strainers

3

150000

450000

... More
Sluice Gates with Spindles

3

447500

1342500

... More
Supply, erection, commissioning and testing of Gantry girder mounted EOT crane of 3.00 ton capacity . Work includes the cost of erection of MS bridge, trolley, rail & all other required mechnical and electrical wiring, cabling, starters etc to complete the work.

1

500000

500000

... More
Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils

47.63

141

6715.55

... More
Diluting and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which aproch is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment and excluding the cost of chemical emulsion)

78.75

236

18585

... More
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.

-

-

-

... More
M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

5.29

3551

18791.89

... More
Providing and laying damp-proof course with cement concrete grade M-150 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compound complete as per specification .

-

-

-

... More
75mm thick.

11.76

405

4762.8

... More
Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix Providing M-25 grade concrete by using min 410 kg of cement per cum instead of M-20 grade design mix.

3.15

5013

15790.95

... More
Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor Three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc M20 grade Nominal Mix

16.25

5173

84061.25

... More
Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix / Design Mix

3.65

4939

18026.36

... More
Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc.

75.6

109

8240.4

... More
Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :

-

-

-

... More
Columns, pillars, posts and struts etc.

85.05

204

17350.2

... More
Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.

43.68

216

9434.88

... More
Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level.

-

-

-

... More
Thermo-mechanically Treated bars (Conforming of relevent IS code)

1470

72

105840

... More
Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks

-

-

-

... More
Cement mortar 1 : 6 (1 cement : 6 coarse sand)

25.2

3603

90795.6

... More
Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :

-

-

-

... More
Cement mortar 1 : 6 (1 cement : 6 coarse sand)

28.13

4081

114796.08

... More
Half brick masonry in foundation & plinth using bricks of designation 75

-

-

-

... More
Cement mortar 1 : 4 (1 cement : 4 coarse sand)

4.2

403

1692.6

... More
Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75

-

-

-

... More
Cement mortar 1 : 4 (1 cement : 4 coarse sand)

34.02

307

10444.14

... More
Brick work in partition in super structure upto five storey 7cm. thick (brick on edges) using bricks of class designation 75 in :

-

-

-

... More
Cement mortar 1 : 4 (1 cement : 4 coarse sand)

45.36

271

12292.56

... More
Steel work in built up tubular trusses including cutting, hoisting ( height upto 10 m)fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Hot finished seamless type tubes.

987.5

99

97762.5

... More
Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :

-

-

-

... More
Windows side hung /Ventilators top or centre hung (openable)

7.56

2459

18590.04

... More
Partly fixed and partly openable [ fixed area not to exceed 33%]

6.8

2665

18132.66

... More
Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance.

6.8

858

5837.83

... More
Providing and fixing Square bars or other flat welded to window, ventilatiors etc.

18.9

86

1625.4

... More
Brick on edge flooring with bricks of class designation 75 including cement slurry & pointing in CM (1 : 3) etc. complete laid on 20 mm thick bed of : Cement Sand Mortar 1 : 6

63

466

29358

... More
P & F 1st qualityHeavy Duty Vitrified Polished Digital tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete. Size 600mm x 600mm

63

1419

89397

... More
Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :

-

-

-

... More
20mm thick .

302.4

166

50198.4

... More
Distempering with dry distemper of approved brand and shade (two or more coats) and of required shade on new work, over and including, priming coat of whiting to give an even shade including all scaffolding.

151.2

54

8164.8

... More
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade :

-

-

-

... More
Two or more coats on new work including preparation of base with primer, putty, lippy complete in all respect.

151.2

66

10054.8

... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

14.36

67

962.39

... More
Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' : 30mm tick- commercial Veneer Both side

6.3

1885

11875.5

... More
Providing and fixing in cement sand mortar 1 : 4 single paitam (rebated) stone doors windows and ventilator frames of approved quarry : Size 100 x 75mm.

13.5

124

1674

... More
Providing and fixing factory made P.V.C. door frame manufactured by M/s Rajshri of the size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm PVC foam sheet mitred at two corners and jointed with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame shall be fixed to the wall using 65/100 mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4 nos of screw to be provided for each vertical member and minimum 2 nos for horizontal member etc. complete as per manufactures specification and direction of Engineer in Charge.

2.55

556

1415.02

... More
30mm thick factory made solid both side Pre laminated panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15x15mm top & bottom rails. M.S .frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC ‘C channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on either side forming stiles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75 mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2) thick, 20mm wide cross PVC sheet shall be provided as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with 7mm (5mm +2mm) thick x 15mm wide PVC sheet bending on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacture’s specification & drawing.(For W.C.and bathroom door shutter).

0.95

4180

3950.1

... More
Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges :

-

-

-

... More
Kota stone 25 to 30 mm thick.

20

629

12580

... More
Provision for Electrical and Sanitary Fittings in J-2 type quarter

-

-

-

... More
Construction of Septic Tank in all type of soil with 40 cm thick masonry in CM 1:6, 15 cm thick CC bed of 1:5:10, M-15 grade CC flooring & over stone slab covering 80 mm thick slab jointing in CM 1:3 ranthal, kharanja, 50 mm thick stone partition walls, 20 mmm thick plaster in CM 1:6 finished with neat floating cement, 4 nos. CI foot rests of approved design two no. 450 mm dia 25 kg each CI cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr, Size 200 * 100 * 130 cm ( for 10 users )

1

18576

18576

... More
Construction of open surface drain with 112 mm thick brick masonry in CM 1:4,110 mm thick base concrete 1:5:10, 37 mm thick M-15 grade CC flooring 12 mm, 1:4 cement plaster on all exposed faces of walls including top surface excavation & disposal of earth within a lead of 50 mtr complete as per approved design / drawings: 112 mm drain 225 mm Av. Depth

3

420

1260

... More
P&F Indian type white glazed vitreous china Ist quality WC Orissa Pan (IS:2556 mark) with 100 mm vitreous china P or S trap including cutting and making good the wall & floor. Size 530*410 mm

1

1506

1506

... More
P&F European type white glazed vitreous china Ist quality double syphonic WC Pan ( IS:2556 mark ) with P or S trap including cutting and making good the wall & floor.

1

3573

3573

... More
P & F Low level Flushing Cistern of 10 litres capacity ( IS:2556 mark ) of approved make with complete fittings CI brackets duly painted, brass ball cock with ball, ( IS:1703 mark ) complete including cutting and making good the wall: PVC with CP brass long bend.

1

1341

1341

... More
P&F PVC storage tank ( IS:12701 ) marked indicating the BIS license no. of approved make with cover 25 mm dia 1 M long GI over flow pipe & 25 cm long wash out pipe with plug and socket including making connections etc. complete of approved design. 500 lit

1

4047

4047

... More
P&F WVC wash basin ( Ist quality, IS:2556 mark ) of approved make with CI brackets duly painted, 1 no. 15 mm CP pillar cock ( IS:8934 mark ) & 32 mm CP brass waste coupling of approved make, 25 mm dia GI waste pipe complete including cutting & making good the wall: Size 510 mm * 400 mm

1

1604

1604

... More
P&F rigid PVC pipe ( IS: 4985 mark ) class II / ( 4 kg / cm2 ) approved quality / make including jointing the pipe solvent cement rubber ring and lubricant. 110 mm dia

8

196

1568

... More
P&F PVC pipe fittings ( IS : 4985 mark ) of approved quality / make including jointing the pipe with solvent cement rubber ring and lubricant:

-

-

-

... More
Coupler ( Socket )

2

85

170

... More
Bend 450

2

116

232

... More
Vent Cowl

2

52

104

... More
Pipe Clip

2

40

80

... More
P&F grating of approved quality / make Stainless steel heavy quality of approved make 125 mm dia

3

62

186

... More
P&F Bib cock ( IS:8931 mark ) superior quality of approved make CP Brass bib cock, 15 mm nominal bore

3

571

1713

... More
P&F B Class GI pipes ( Internal work ) with GI fittings ( IS:1239 mark ) & MS clamps including cutting and making good the wall and floors:Exposed on wall

-

-

-

... More
15 mm nominal dia

10

176

1760

... More
25 mm nominal dia

6

293

1758

... More
P&F B Class GI pipes ( External work ) with GI fittings ( IS:1239 mark ) including trenching & refilling earth etc. 15 mm nominal dia

10

179

1790

... More
P&F Beveled edge mirror of special glass of approved make ( Atul / equivalent ) complete with 6 mm thick asbestos cement sheet ground fixed to wooden screw & washers.Size 600 * 450 mm * 4 mm thick

2

275

550

... More
P&F towel rail or ring of approved quality / make. CP brass towel rail with brackets 600 * 20 mm

1

309

309

... More
P&F Tooth paste & brush holder of approved quality / make: stainless steel

1

198

198

... More
P&F soap dish or tray of approved quality / make. CP Brass ( heavy & superior quality )

2

79

158

... More
P&F Jet spray for water closet with CP copper tube flange of approved make

1

248

248

... More
Providing and fixing Anodised Aluminium Curtain rod with Aluminium brackets. 20 mm

6.54

56

366.24

... More
Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade ( IS:694 ) of approved make in surface / recessed ISI marked MMS ( IS:9537 P-III ) PVC conduit & its accessories, round tiles, 18 SWG MS box with earth terminal , Screwless cage connectors for neutral looping in swith board & false ceiling point, 6 A switch, 3.0 mm thick ISI marked phenolic laminated sheet, Zinc plated / brass screws, cup washers, making connections, testing etc as required.

-

-

-

... More
Short point ( Up to 3.0 mtr )

20

219

4380

... More
Medium point ( Up to 6.0 mtr )

8

305

2440

... More
Long point ( Up to 10.0 mtr )

8

421

3368

... More
Wiring of 3 pin 5 amp light plug point with 1.5 sq mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade ( IS:694 ) of approved make in surface / recessed ISI marked MMS ( IS:9537 P-III ) PVC conduit & its accessories, 18 SWG 175 mm x 100 mm x 60 mm MS box with earth terminal , Screwless cage connectors for neutral looping in swith board , 6 A switch, 6 A Socket, 3.0 mm thick ISI marked phenolic laminated sheet, Zinc plated / brass screws, cup washers, making connections, testing etc as required.

-

-

-

... More
On Board

20

79

1580

... More
Medium point ( Up to 6.0 mtr )

8

374

2992

... More
Long Point ( Up to 10.0 mtr )

8

517

4136

... More
S&F of power plug ponit accessories on 18 SWG metal box of size 175 * 100 * 60 mm on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket out let making connection, testing etc as required.

5

199

995

... More
P & F 240 / 415 V MCB of breaking capacity not less than 10 KA ( B / C / D tripping characteristic ) ISI marked IS 8828 ( 1996 ) confirming to IEC 60898 in existing board / sheets including making connections with lugs, testing etc as required. Single pole MCB 6 A to 32 A rating

2

161

322

... More
P & F 240 / 415 V isolator confirming to IS:1497 - III / IEC 60947 - 3 on existing board / sheet including making connections with lugs, testing etc as required. 30 A / 40 A rating

1

354

354

... More
P&F Recessed / surface mounting heavy duty vertical type 16 SWG sheet steel Distribution board with provision of incomer suitable for MCB / RCCB and SP / TP MCB as out going phophatised / powder painted complete with insulated suitable rating copper bus bar, neutral link earth link, and din bar, masking sheet confirming to IS:13032 & IS:8623 including making internal DB terminations with copper lugs, testing etc. as required. Single door ( Single phase ) 4 way

1

4746

4746

... More
Plate earthing as per IS:3043 with GI Earth plate of size 600 mm * 600 mm * 6.0 mm by embodying 3 to 4 mtr below ground level with 20 mm dia GI B class watering pipe including all accessories like nut, bolt, reducer, nipple, wire meshed funnel and CC finished chamber covered with hinged type with locking arrangement CI Cover, CI frame of size 300 mm * 300 mm complete with alternate layers of salt and coke / charcoal, testing of earth resistance as required

1

2800

2800

... More
P / Laying XLPE / PVC insulated & PVC sheathed cable of 1.1 kV grade with aluminium conductor of IS:7098-I / 1554 P-I of group 1 of approved make in ground as per IS:1255 including excavation of 30 cm * 75 cm size trench, 25 cm thick under layer of sand, II class brick covering, refilling earth, compaction of earth, making necessary connection, testing etc as required of size 4.0 sq.mm 3 core

21.61

131

2830.91

... More
P&F double ball bearing capacitor start aluminium body & blade Ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required ( Group 1 ) 1200 mm sweep

3

1481

4443

... More
P&F of heavy duty capacitor start, double ball bearing 900 /1400 RPM single phase ISI marked Ehaust fan IS:2312 marked in existing opening including making connections testing etc as required.( Group 1 ) 300 mm sweep ( 900 /1400 RPM )

3

2369

7107

... More
P&F IP - 43 protected street light luminaire on existing bracket suitable for FTL/T5 lamps,housing made out from stove enamel painted alluminium alloy, stove enamel painted CRCA sheet canopy reflector cum contorl gear tray , UV stabilized clear ribbed acrylic diffuser held with synthetic gasket, min. 6 nos. of toggles for securing acrylic cover with housing with all necessary accessories. ( low loss copper choke, starter, starter seat ) / electronic choke with terminal block duly prewired with copper conductor including making connection, testing etc as required ( without tube ). 1x36 watts

3

1171

3513

... More
S&F of street light bracket made out from following size of 'B' class GI pipe with heavy duty pole clamp, saddles suitable fastnrs etc as required. 32 mm dia.

1

271

271

... More
P&F strip type fluorscent tube fitting fabricated from CRCA sheet and finished with powder coating / stove enamelled paint / extruded non corrosive UV resist EP channel complete with accessories ( low loss copper choke, starter, starter seat ) / electronic choke with terminal block duly prewired with copper conductor including making connection, testing etc as required ( without tube ). 1x36 watts with OCCB

4

277

1108

... More
P&F fluorescent tube rod in existing fixtures as required minimum 3 star rating 36 / 40 watts

3

36

108

... More
33kV Double Pole Structure with accessories: Supply, Installation, testing and commissioning of 33 KV Double pole structure with Air Break Switch having following specifications. a) DP : Double Pole structure made of two nos. 11 meter long PCC poles (400Kg) & 7 nos. MS Channel each of size 100x50x6mm complete with earthing of the structure as per REC standards in all respect with nuts, springs washers, clamps as required. b) GO: Off load type gang operated3-pole Horizontal type switch suitable for 33KV, 800A, 3 phase central post rotating double break isolator complete with MS Hardware, copper moving & fixed contacts, assembly of 9 Nos. Post Insulators, GI pipe of suitable length for operation. c) DO: 3 Nos. Horizontal/Vertical mounted 33KV Horn Gap fuse set / Drop Out fuse set, 33KV barrel fuses mounted on 6 Nos. Post insulators. e) LA: 3 piece non linear resistor type lightening arrestor of approved make suitable for 3 wire, 33KV OH line with rated voltage 30KV rms & nominal discharge current rating of 10 KA & complete with galvanized clamping arrangement, GI bolts, nuts, washers etc.as required. e) Jumpers:3 Nos. ACSR Dog Conductor mounted on pin type insulators as required. The GO shall be operated by hand operated liver properly earthed with provision for locking mounted at 3’.Complete as per technical specifications and / or as directed by engineer.

4

84321

337285.96

... More
36 KV Potential Transformer: Supply, Installation, testing & commissioning of 36 KV Potential Transformer of ratio 33000/110V, Burden-30VA with Accuracy class- 0.5 conforming to IS-3156 excluding civil works complete with following parameters. Insulation Level Impulse withstand voltage - 170 KV One minute Power frequency withstand voltage on Primary winding - 70 KV rms Secondary winding - 2 KV rms Frequency - 50 Hz Winding connection - Star/Star Rated Voltage factor - 1.2 continuous and 1.5 for 30 secs Type of Insulation - Resin cast One of the secondary terminals of the VTS shall be solidly earthed complete as per technical specifications and /or as directed by engineer.

4

35663

142652

... More
36 KV Current Transformer: Supply, Installation, testing & commissioning of 36 KV current Transformer of ratio 240-120-60/5A-5A-5A, Burden-60VA, class of Accuracy-5P for relaying & 0.5 S for metering and shall be conforming to IS-2705 excluding civil works complete with following parameters. Insulation level Impulse withstand voltage - 170KV One minute Power frequency withstand Voltage Primary winding - 70KV rms Secondary winding - 03KV rms Frequency - 50 HzRated continuous thermal current - 120% of rated primary current Short time thermal rating - 25 KA for 3 seconds Rated output Core I Core II 60 VA 30 VA complete as per technical specifications and /or as directed by engineer.

4

40077

160309.12

... More
36 KV outdoor type Vacuum Circuit Breaker: Supply, installation, testing & commissioning of 36 KV outdoor type Vacuum Circuit Breaker having rated current 1250 A, fault level – 25 KA (rms) conforming to M-2 class and IS-13118/IS-3427/IS-10118 PartIII/ IS-2165-1977 & IS-3716-1976 with principal parameters of Circuit Breaker as under: No. of Poles - 3 Rated Voltage (Nominal/Max) - 33/36 KV Rated frequency - 50 Hz System neutral earthing - Effectively grounded Insulation Level Impulse withstand voltage - 170KV Peak One minute Power frequency withstand voltage - 70KV (rms) Short time current for 3 sec - 25KA Breaking CapacitySymmetrical - 25KA Asymmetrical - As per relevant standard. Rated making capacity - 2.5x25KA Total breaking time - 3 cycles (max) Total closing time - 4 cycles (max) Creepage distance - 900mm or more Mounting - Steel pedestal Operating Mechanism - Motor operated spring charged closing mechanism or magnetic actuator. Type - Bimetallic/Alluminium Alloy type clamp suitable for both horizontal/vertical take off. Suitable for ACSR Dog conductor. Complete as per technical specifications and/or as directed by Engineer.

4

312359

1249436

... More
33KV Control & Relay Panel: Supply, installation, testing & commissioning of 33KV Control & Relay Panel duly mounted with protective relays, metering equipments etc. required for the satisfactory operation of 33KV side of 33/0.4KV Power Transformers. The C/R cubicles of folded type construction with front base frame and door frame fabricated from CRCA sheet steel 10 SWG (3mm) thickness, while the side, roof & doors fabricated out of 14 SWG (2mm) thick CRCA sheet steel. The height of panel inclusive of base channel height of 102 mm of not more than 2312 mm, width of 750 mm or suitable to accommodate equipments and panel of depth 610 mm with dust & vermin proof and suitable for tropical use. The complete panel incorporates all necessary meters, instruments relays, control switches, indicating lamps, mimic buses, audible & visual alarms. The enclosure provide minimum degree of protection equivalent to IP-51 as per IS 2147. The relays offered conforming to latest issue of IS: 3231 & IS-8686. For over current & earth fault numerical relays be provided. In three phase protection relay, the setting for over current element be 50% - 200% (in steps of 10%) and for earth fault element from 10 to 80% (in steps of 10%). Relay should also have features of self diagnosis, minimum last five abnormal events recording over current & earth fault including fault level & phase along with date & time, on line display of current and communicable with open protocol having RS- 485 port. The panel be equipped with Annunciation scheme for indicating all annunciations equipped for the trip & non trip alarms. All indicating instruments of Switch Board type back connected suitable for flush mounting and provided with dust & vermin proof case for tropical use. All indicating instruments conforming to latest edition of IS-2419/1963. complete as per technical specifications and /or as directed by engineer.

4

167218

668872

... More
100 kVA, 33 / 0.433 kV, Transformer: Supply, Installation, Testing and commissioning of copper wound Transformers 33/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories with off load tap changer (+5% to -10% in steps of 2.5%), winding / Top --- temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5% of the maximum total loss values for 11 KV as per energy efficiency level - 2 at basic Insulation level conferming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014.

4

834573

3338292

... More
415V, PMCC Panel: Supply, Installation, testing and commissioning of floor mounted PMCC (Indoor, Dust proff IP-42 front operated with 2 mm thick sheet metal compartmentalised) with allaccessible parts, head shrinkable sleeves, SMC/DMC bus bar supports, padlocking facility on outgoing feeders etc.

-

-

-

... More
100 A MCCB Incomer (Fixed type ) with metering CTs, multi fuction meter compatible to scada, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect.

4

52993

211972

... More
Bus Coupler Feeder (drowout type ), 160 A MCCB, 50KA, 3 Pole without release with Al Bus Bars, Indicating Lamps, Control Fuses and wiring etc. complete in all respect.

2

52993

105986

... More
32A, MCCB (Fixed type ) as outgoing CT's, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect.

10

33511

335110

... More
40A, MCCB (Fixed type ) as outgoing CT's, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect.

6

33511

201066

... More
100A, MCCB (Fixed type ) as outgoing CT's, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect.

2

33511

67022

... More
Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank): SITC of self healing MPP/MP type shunt capacitor (banks) conforming to IS:13340-41 / IEC :831-1&2 in panel or parallel with load terminals , the capacitor shall be fitted with discharge resistors, pressure sensitive disconnector ( PSD ) and shall have dissipation factor less than 0.0025 at 50 Hz and total wattage loss less than 0.5 Watt per KVAR. including making connections with suitable capacity conductors/cables testing as required.

45

196

8820

... More
6 to 14 stage - sensitivity upto 50 milli Amp.: SITC of microprocessor based intelligent power factor correction relay having sensitivity up to 50 milli Amp secondary current and following way, self analysing auto c/k setting according to targeted power factor setting, the relay shall have minimum three digit display unit for display of real power factor, targeted power factor, lag / lead capacitor switching status, alarm output for under current, over current, insufficient compensation, indication of switching on units, auto/manual status, and shall have over load protection, no volt release etc. as required.

2

18220

36440

... More
Star -Delta starter for motors: Supply and Installation of STAR DELTA STARTER IN THE EXISTING PANEL

-

-

-

... More
15 KW

2

13578

27156

... More
37 KW

2

31226

62452

... More
Local Push Button Station SITC of Local Push Button station fabricated with 16 SWG CRCA sheet, painted with polyster Powder coated finish after chemical treatment with Folliwng items and accessories:- i Shrouded Type push button with 2 NO Contacts element for Start/forward- reverse. ii Lockable Mushroom head type push buuton with 2 NC Contact element. iii 2.5 Sqmm clipon type terminals as requried with 20% spares. iv 1.5 Sqmm PVC insulated felxible copper wire with lugs & ferrules as requried.

2

2026

4052

... More
Batteries: SITC of battery bank of min 150 AH capacity comprising SMF/VRLA batteries , MS / Teakwood battery stand , interconnect wiring etc as required complete in all respect of rating:

-

-

-

... More
110V

2

218208

436416

... More
Battery Charger: SITC of FCBC ( Float cum boost charger)suitable for 415V +/-10%, 50 Hz , 1-ø / 3 -ø Input & 24/ 48 /110 V DC OutputNatural Cooled, free standing in Sheet Steel enclosure, SCR controlled , regulation +/-1% , Efficiency 75% on FLAC/ DC Instruments, Selector Switch ,Built in DC Distribution Board (6 No MCB), indication , control as required of following rating:

-

-

-

... More
25 A + 25 A

2

90993

181986

... More
Distribution Board: Providing & Fixing of IK09 recessed/surface mounting heavy duty horizontal type sheet steel of 1.6 mm thick Distribution board as per PWD specification for electrical Works ISI marked conforming to IS-13032 & IS-8623 / conforming to IEC 61439-3. Phosphatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link , connecting wire of suitable rating and din bar,masking sheet, including making internal DB terminations with copper lugs and with detachable gland plate, including making connections, testing etc. as required.OEM shall have submit NABL / CPRI / ERDA accrediated lab test reports before execution & All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . IP-43 Double door (single phase) 12 Way (12 O/G +2 I/C)

6

1106

6636

... More
40A, Single pole & neutral MCB: P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/ sheets including making connections with lugs, testing etc. as required.

50

755

37750

... More
40A, Three pole & neutral MCB: P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/ sheets including making connections with lugs, testing etc. as required.

16

1347

21552

... More
Cables: 33 kV Cables: Providing & Laying XLPE insulated as per IS:7098/II/85 H.T.cable as per PWD specification for electrical Works for working voltage 33K.V.(E) in existing RCC / Hume / Stoneware / PVC pipe / open duct / cable trench with filling of excavated earth in trench, on existing cable trays or on surface etc. including making necessary connection, testing etc.as required of size as per points (a), (b), (c) mentioned below:- (a) Material :- H4- Grade aluminium conductor of purity 99.6 % & as per IS:1554 P-I / IS :7098 P - I (b) conductor shall have electrolytic aluminium confirming to IS 8130, IS 3975-1999 for armouring of cables , IS 5831 for sheath, IS 10810 (Part 0 to 64 ) for testing procedures (c) OEM Must have ISO 9001 & 14001 certifications for quality assuarance & its own in house NABL lab setup for all testing facilities for cables . All above as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

-

-

-

... More
3 core x 300 Sq.mm (2R)

400

1958

783200

... More
1.1 kV: Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Armoured aluminium cable of 1.1 KV grade as per PWD specification for electrical Works in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench with filling of excavated earth in trench , on existing cable trays or on surface etc. including making necessary connection, testing etc. as required of size and as per points (a), (b), (c), mentioned below:- (a) Material :- H4- Grade aluminium conductor of purity 99.6 % & as per IS:1554 P-I / IS :7098 P - I (b) conductor shall have electrolytic aluminium confirming to IS 8130, IS 3975-1999 for armouring of cables in armoured cable items , IS 5831 for sheath, IS 10810 (Part 0 to 64 ) for testing procedures. (c) OEM Must have ISO 9001 & 14001 certifications for quality assuarance & its own in house NABL lab setup for all testing facilities for cables . Appropriate type test certificate / OEM test report shall be submitted . All above as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

-

-

-

... More
3C x 4 sqmm

800

61

48800

... More
3C x 10 sqmm

400

99

39600

... More
3C x 16 sqmm

150

104

15600

... More
4C x 4 sqmm

600

74

44400

... More
4c x 16 sqmm

500

123

61500

... More
3.5C x 70 sqmm

200

320

64000

... More
3.5C x 95 sqmm

200

386

77200

... More
Providing & Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size

-

-

-

... More
3C x 35 sqmm

150

242

36300

... More
Providing and laying XLPE/PVC insulated & PVC sheathed armoured control cables of 1.1 KV grade with copper conductor as per IS 1255 including excavation of 30 CmX75 Cm size trench 25 Cm thick under layer of sand and second class bricks covering, backfilling & compaction

-

-

-

... More
3C x 1.5 sq.mm

400

112

44800

... More
8C x 1.5 sq.mm

400

181

72400

... More
14C x 1.5 sq.mm

400

281

112400

... More
Cable Termination: 11 kV: Providing & making heat shrinkable type indoor/outdoor/straight through terminations/ joint kit as per PWD specification for electrical Works suitable for 11 KV / 33 KV cable with required components, prepration of cable ends. Type test report should be as per IS13573:2011 which covered all sequence for table 2 for termination kit and table 3 for streight through joint inclusive thermal & dynamic short circuit test, humidity test, soil fog test. Cross linking shall be done out side factory with E- beam/ peroxide technology. Extrusion process shall be in house OEM within same vicinity. OEM test lab should be as per ISO 9001:2015 & 14001 : 2015 & reports submitted to engineer in charge including testing etc. as required of following sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

-

-

-

... More
3 core 240/300 Sq.mm, Indoor

8

4301

34408

... More
3 core 240/300 Sq.mm, Outdoor

8

5375

43000

... More
1.1 kV Cable Termination: Supplying and making one end termination with heavy duty brass compression gland (as per IS 12943- 1990) SIBG type, heavy duty aluminium lugs (as per IS 8309 - 1993 & IS 8337-1976 ) duly crimped with crimping tool, PVC tape as per PWD specification for electrical Works etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

-

-

-

... More
3C x 4 sqmm

60

55

3300

... More
3C x 10 sqmm

50

64

3200

... More
3C x 16 sqmm

12

79

948

... More
3C x 35 sqmm

12

100

1200

... More
4C x 4 sqmm

50

60

3000

... More
4c x 16 sqmm

40

88

3520

... More
3.5C x 70 sqmm

8

186

1488

... More
3.5C x 95 sqmm

8

216

1728

... More
P & F of surface/recess mounting CFL luminaire made from powder coated CRCA sheet with aluminium reflector assembly electrochemicaly brightened & anodized cross louvers, complete with accessories e copper ballast, starter, holder, terminal block duly prewired with copper conductor including making connections, testing etc. as required (without lamp)

-

-

-

... More
Surface mounting 2 X PL-9/11 Watt

6

991

5946

... More
P & F 9/11/13/ Watt CFL mirror light with CRCA powder coated housing,diffuser,end covers,copper ballast,holder prewired upto terminal block including making connection testing etc. as required (without tube)

6

347

2082

... More
P & F IP-43 protected street light luminaire on existing bracket suitable for FTL, made out from CRCA sheet steel finished with stove enameled paint, having deep drawn aluminium alloy canopy reflector cum control gear tray, clear ribbed acrylic diffuser held with synthetic gasket, with all necessary accessories copper wound ballast, capacitor, starter, holder prewired with pvc insulated copper conductor including making connection testing etc. as required. (without tube)

-

-

-

... More
1 X 36 Watt

6

1171

7026

... More
2 x 36

4

1801

7204

... More
Supply and erection of Decorative Cast Iron pole as per approved design of following length with base plate on the cement concrete foundation of M-15 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS 1367 P III). The pole shall be made of Cast Iron as per IS 210:1993, precision machining and filling job to achieve good finish and a fine coat of primer on each element before assembling. After assembling of each element one coat of primer and two coats of P.U. paint are applied. Approved coloured UV resist coating of mat/ glossy/metallic finish followed after air drying of pole. The pole shall have a weatherproof flush door and locking arrangements, two/one arm bracket of length of 430/380mm complete in all respect.

-

-

-

... More
6 Meter Pole height

6

35641

213846

... More
Earth Pit: Pipe Earthing as per PWD specification for electrical Works as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. ' B ' class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

6

2191

13146

... More
Copper Earth plate: Plate Earthing as per PWD specification for electrical Works as per IS:3043 with copper Earth plate of size 600mm x 600mm x 3.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe, including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

6

8694

52164

... More
50mm x 6mm Copper Strip: Supply & Laying following size earth strip in horizontal or vertical run in ground/ surface/ recess including riveting, soldering, saddles, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

200

2042

408400

... More
Cable Tray: Supply, Fabricating & installing following sizes of powder coated ladder type M.S. cable trays with rungs at span of 250 mm including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/ wall with MS suspenders including bolts & nuts ,fastners, supports, painting suspenders etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

-

-

-

... More
150mm x 50mm x 1.6mm

200

279

55800

... More
300mm x 62.5mm x 2.0mm

200

528

105600

... More
600mm x 50mm x 2.0mm

200

825

165000

... More
Glands (including Lugs): Supplying and making one end termination with heavy duty double compression brass gland SIBG type, heavy duty copper lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size.

-

-

-

... More
3C x 1.5 sqmm

300

148

44400

... More
8C x 1.5 sq.mm

300

155

46500

... More
14C x 1.5 sq.mm

300

175

52500

... More
Electrical Insulation Rubber Mat for Panel: Providing & Fixing of Electrical insulating rubber matts as per PWD specification for electrical Works, ISI marked confirming to IS: 15652 / 2006 with one side anti skid abberation marks and pasting the mat with synthetic rubber adhesive as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

-

-

-

... More
33 KV, 3 mm thick with proof voltage 36 KV / 3 min. and Break Down Voltage 65 KV

20

2302

46040

... More
415 V, 15 mm thick,

40

1489

59560

... More
Design, manufacture, supply, installation, testing and commissioning of indoor type PLC panel of size approx. 1100 mm X 700 mm X 2100mm (LBH) , fabricated out of min. 2 mm thick CRCA sheet complete with latest configuration PC, necessary programming for SCADA software and comprising of all accessories not limited to the following: DI – 60 num DO – 60 num AI – 8 num AO – 4 num MCB 10A DP – 1 num MCB4ADP – 2 num MCBSP2A – 8 num MCB 1A DP – 15 num 24 VDC Power Supply 10A – 1 num Push Buttons – 20 num Selector Switch – 10 num Control Relays – 200 num Annunciator with 24 Windows NO to NC Type Microprocessor Based, Window Size 75*42mm, 110VAC, with Electronic Hooter – 1 num Control Transformer - 1 num Emergency PB – 1 num Panel Cooling Fan – 1 num Panel Light with Door Switch – 1 num Control Indication Lamp – 20 num Wiring + TB etc – 1 lot Hardware – 1 lot

1

1252882

1252882

... More
HMI Display, Colour, 12" having Ethernet Port, USB Port ect.

1

25000

25000

... More
Operator Station PC SET includes, Core i5 processor, 8 GB DDR-3 RAM, 1TB SSD, DVD RW Drive, RS-232/485 Ports, 1 Parallel Port, 4 nos. USB Port, 2x Ethernet Cards, Keyboard, optical mouse, 32'' LED monitor, Latest Original window, MS Office, Anti Virus ect.

1

165000

165000

... More
Quad-band GSM/GPRS modem with Ethernet bridge/ router/ serial server (RS232/485) interface.

1

50000

50000

... More
1.5 Tons Split Type Air Conditioners with auto switch over circuit

1

73895

73895

... More
Providing and laying Stranded/ Flexible Annealed Bare copper conductor ,XLPE/PVC insulated suitably laid up together overall polyester taped Al (inner sheeted GI Steel wire Mylar/Drain wire) along with ATC drain wire , round/steel Armoured overall PVC sheathed (ST-1) overall screened Core Armoured instrumentation Cables generally confirming to PAS 5308- Part-2-2009.

-

-

-

... More
1 SQMM, 12 Core

300

207

62100

... More
1 SQMM, 24 Core

197.18

334

65858.12

... More
Providing and laying Stranded/ Flexible Annealed Bare copper conductor ,XLPE/PVC insulated suitably laid up together overall polyester taped Al (Mylar tape wrapped) along with ATC Drain wire overall PVC sheathed (ST-1) overall screened Pair Armoured instrumentation Cables generally confirming to PAS 5308- Part-2-2009.

-

-

-

... More
1 SQMM, 1 Pair

560

98

54880

... More
Providing and laying XLPE/PVC insulated & PVC sheathed Armoured control cables of 1.1 KV grade with copper conductor as per IS 1255 including excavation of 30 CmX75 Cm size trench 25 Cm thick under layer of sand and second class bricks covering, backfilling & compaction.

-

-

-

... More
4C x 2.5 sq.mm

300

202

60600

... More
4C x 1.5 sq.mm

400

152

60800

... More
Providing, Installation, Testing and Commissioning of ULTRASONIC LEVEL TRANSMITTER for Water Application : Principle : Time of Flight / Sensor MOC PP / Process Connection 1 1/2 inch BSP or 2 inch BSP Threaded type / Power Supply: 24 V DC / Output: 4- 20mA / Display: Integral display for programming and Display Reading / IP 66

-

-

-

... More
0-5M

4

62890

251560

... More
0-8M

2

99051

198102

... More
Providing, installation, testing and commissioning of Diaphragm Type Pressure Gauges Dial size 150 mm glycerin filled shatterproof glass, Over range protection: 125% of maximum pressure, Material of sensor and other wetted parts: SS type 316, Housing material: Die cast aluminum

9

7075

63675

... More
Providing, installation, testing and commissioning of Diaphragm type Pressure Switches Sensing Element: Bellows / Diaphragm, Material of sensor and other wetted parts: SS type 316, Housing: Die cast aluminum, Switch type: Microswitch, Repeatability: ± 1% of span, Switch Contacts: 2 NO + 2 NC

9

6603

59427

... More
Providing, installation, testing and commissioning of Level Switch ( Conductivity) Conductivity Probes: (i) Rigid for lengths of up to 3 meters (ii) Flexible for lengths above 3 meters (Rigid probes preferred), Probe insulation: Teflon, Probe head protection class: IP 65 of IS 13947 Part I, Probe head housing material: Aluminum

1

31445

31445

... More
Providing, installation, testing and commissioning of Capacitance Level Transmitter for tank /sump level Accuracy: ±1.5 % of span, Probe type: Rod, Probe material: SS type 316, Weather Protection Class: IP 65 of IS 13947 Part I, Output: 4-20 mA DC (Isolated), Material of wetted parts: SS 316, Probe insulation material: Teflon, Stilling pipe: SS type 316 with perforations

1

70751

70751

... More
Supply of GSM /GPRS based data transmitter / Data Logger for Bulk Flowmeter installed at VTC Inlet side (woltman Pulse Output only ), Battery Powered -7.4V, battery life 3-5 Years, (1 no Data transmit in a day), 4-20mA From Pressure RS485 Display-16*2 LCD, Encloser-165*120*65 mm, ABS Protection-IP65, Operating tempreature -55 Deg. C

35

25500

892500

... More
Modular RTU PANEL for ESR complete with DI, DO, AI and modbus communication ports and power supply 24 VDC or for variable power supply using batteries, rechargeable batteries, solar or 10.8 V DC to 28.8 V DC with VPN modem (3G/4G) ; connection to control center via Tele Control Basic, DNP3, IEC60870-5-104 and Communication protocols, on-board I/Os min. (8 DI, 4 DQ, 2 AI), configuration and diagnostics per web interface, RJ45 port, mobile communications antenna (GSM/UMTS), Mini SIM card, with adapter Micro SIM card also, GPRS (Multi-slot Class 10), 35 mm DIN rail mounting, TCP/IP, DNP 3, Open VPN-Client. Panel Enclosure for RTU Location, wall/floor mounted along with wiring and related accessories and arrangement of mounting of RTU, Modem having IP-55 outdoor Protection with canopy. Power supply arrangement shall be Solar Based along with Solar Batteries & Solar Invertors suiatble for applicable. RTU application software (multiusers) shall be provided for pump houses, MCC, and Jal Dhara Commond centre at Jaipur Jal Bhawan.

4

72000

288000

... More
Cost for basic service charges, Administration and Management, running of office, staff quarters, comprehensive Operation, Maintenance and Repairs including Preventive Maintenance, IEC activities as per scope of work, cost of material required for maintenance & repairs, cost of lubricants, saltf for producing chorine, consumables spare parts (if the spare parts supplied to PHED are used in emergency) as per scope of work & items & conditions of contract no, amt will be paid for O&M in DLP

-

-

-

... More
For the 1st year of O&M after DLP

1

762900

762900

... More
For the 2nd year of O&M after DLP

1

801045

801045

... More
For the 3rd year of O&M after DLP

1

841097

841097

... More
For the 4th year of O&M after DLP

1

883153

883153

... More
For the 5th year of O&M after DLP

1

927310

927310

... More
For the 6th year of O&M after DLP

1

973674

973674

... More
For the 7th year of O&M after DLP

1

1022360

1022360

... More
For the 8th year of O&M after DLP

1

1073477

1073477

... More
For the 9th year of O&M after DLP

1

1127150

1127150

... More
For the 10th year of O&M after DLP

1

1183509

1183509



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements
Combined ShapeCreated with Sketch.Sign In
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.
TENDER BY COUNTRIES
View All
United States Tenders|
United Kingdom Tenders|
Spain Tenders|
France Tenders|
Qatar Tenders|
Australia Tenders|
Canada Tenders|
China Tenders|
Malaysia Tenders|
Maldives Tenders|
Singapore Tenders|
Bangladesh Tenders|
Ethiopia Tenders|
Bhutan Tenders|
Kuwait Tenders|
Oman Tenders|
Germany Tenders|
Egypt Tenders|
Ghana Tenders|
Saudi Arabia Tenders
TENDER BY AUTHORITIES
View All
Federal Road Agency Tenders|
Bangladesh Railway Tenders|
Area Metropolitana De Barcelona Tenders|
Jsc Russian Railways Tenders|
Kuwait Oil Company Tenders|
Civil Aviation Authority Tenders|
Food And Agriculture Org. Tenders|
Eskom Tenders|
Energy Regulation Commision Tenders|
Dept Of Defence Tenders
TENDER BY CATEGORIES
View All
Agriculture Or Forestry Works Tenders|
Automobiles And Auto Parts Tenders|
Civil And Construction Tenders|
Consultancy Services Tenders|
Education And Training Services Tenders|
Electrical And Electronics Tenders|
Finance And Insurance Sectors Tenders|
Food Products Tenders|
Furnitures And Fixtures Tenders|
Healthcare And Medicine Tenders
TENDER BY PROCUREMENT
Goods Tenders|
Works Tenders|
Services Tenders
OFG MANUFACTURING BUSINESSES PRIVATE LIMITED
  • Head Office
    6th Floor, Global Business Park, Tower A, Besides Guru Dronacharya Metro Station, Gurugram, Haryana - 122002, India
  • Sales Office
    B - 705 & 706, Sankalp Iconic Tower, Opp. Vikramnagar Colony, Iscon Cross Road, S. G. Highway, Ahmedabad - 380054, India
COMPANY
POLICIES
SUPPORT
MOBILE APPS
© Powered by OFG MANUFACTURING BUSINESSES PRIVATE LIMITED, All Rights Reserved