Public Health Engineering Department Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 1,63,200Document Cost
₹ 5,000Tender Fee
₹ 1,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_PHCJO_213484_3Bid Award Id
ViewTender No
NIT No. 42-50/2020-21 Circle JaloreTender Authority
Public Health Engineering Department ViewPurchaser Address
-Website
http://https://phedwater.rajasthan.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
(3.1.1.1)The rate indicated below are excluding the cost of pipes, specials and valve required for inlet, outlet, washout, overflow and bypass arrangement.
-
-
-
(3.1.1.7)For staging 20 Mtr add 5%
300000
-
0.57
(3.1.1.11)Following rates are for seismic zone II. For zone III, these rates shall be increased by 5% and for zone IV, these rates shall be increased by 10%. Concerned Executive Engineer shall confirm the seismic zone for the scheme from seismic zones plan before estimation and adopt appropriate rates as per actual seismic zones.
-
-
-
(3.1.2)Rates for RCC OHSR, SBC 10T/sqm, seismic zone II and Staging 18 Meter.
-
-
-
(3.1.2.7)300 KL capcity
300000
-
11.3
(3.4)Providing and flxing double flanged ISI marked DI Class K-9 pipes as per IS:8329-2000 (amended upto date), as vertical pipes for RCC Reservoirs including specials required such as duckfoot bend, bend, tee etc. providing clamps at every 3 mtr, jointing materials such as nuts, bolt, rubber packing, hydraulic testing etc. complete in all resepect upto and from valve chamber as per direction of EIC, Technical Specification and Scope of work.
-
-
-
(3.4.1)100 mm
30
-
1634
(3.4.3)200 mm
70
-
3219
(3.4.4)250 mm
30
-
4341
(RUIDP 19.20.2)Providing, lowering, laying, aligning, fixing in position in pipe line, manually operated CI D/F Sluice valves of approved make (IS: 14846 amended upto date) PN 1.0 class of following dia complete (including jointing and jointing material) including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. dia in mm
-
-
-
(19.20.2.2)100 mm
1
-
5690
(19.20.2.5)200 mm
3
-
15400
(19.20.2.6)250 mm
2
-
23700
(RUIDP 19.34.2.6)Providing, lowering, laying, aligning, fixing in position and jointing in pipe line, C.I. dual plate check valves as per API:594 and API:598 of PN 1.0 rating of following dia (including jointing a nd jointing material), including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer Category "B" (Makes / vendors other then Category "A" will be considered in category “B”).
-
-
-
(19.34.1.5)200 mm
2
-
13800
( C.W.R. (450 KL ) (BSR PHED JAIPUR 2019, RUIDP 2017))
-
-
-
(3.2)Construction of RCC Circular Clear Water Reservoirs of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab, top roof slab / dome, 20 mm thick cement plaster with water proofing compound in CM 1:3 proportion and food grade epoxy paint to inner face of the container and dome/slab, including refilling and disposing of surplus stuff , all labour and material charges, providing and fixing accessories such as M.S./Alluminium ladder/RCC Stairs inside and outside, manhole frame and cover, puddle collar, ventilators, satisfactory hydraulic test and water tightness test as per IS code and providing three coats of cement paints to all exposed surface of structure including dome, etc. complete in all respect as per design data, criteria, obligatory requirements and detailed specifications, scope of work and GA drawing. The job include painting the name of the scheme and other details on the reservoir and any other work related to structure as per the directions of Engineer-in- Charge, Technical Specification and Scope of Work.
The rate indicated below are excluding the cost of pipes, specials and valves required for inlet, outlet, washout, overflow arrangement.
-
-
-
The rate indicated below are excluding the cost of pipes, specials and valves required for inlet, outlet, washout, overflow arrangement.
-
-
-
(3.2.1)For capacity upto 500 KL.
450000
-
5
(1.6)Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge.
-
-
-
(1.6.1)MS pipe specials upto 600 mm dia (with minimum 5.0 mm thickness sheet)
1120
-
119
(RUIDP 19.20.2)Providing, lowering, laying, aligning, fixing in position in pipe line, manually operated CI D/F Sluice valves of approved make (IS: 14846 amended upto date) PN 1.0 class of following dia complete (including jointing and jointing material) including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. dia in mm
-
-
-
(19.20.1.4)150 mm
1
-
9230
(19.20.2.5)200 mm
1
-
15400
PUMP HOUSE (SIZE 6.0mX4.0 M) (Based on PWD Jalore BSR 2019, RUIDP 2017)
-
-
-
(B-1/ 1.8)Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas(exceeding30 cm in depth.1.5min width as well as 10 sumonplan) including disposal of excavated earth, lead upto 50mandlift upto1.5m, disposed earth be levelled and neatly dressed: All kinds of soil.
25.17
-
211
(B-3/ 3.2.6)Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:3:6 (1Cement :3 Course Sand :6 Graded stone aggregate 40 mm nominal size (Hand Broken)
9.22
-
2941
(B-6/ 6.1.7)Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30CM thick wall in: Cement Mortar 1:6 ( 1-Cement: 6-Sand )
27.17
-
2808
(B-6/ 6.2.7)Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm. thick walls in : Cement Mortar 1:6 ( 1-Cement: 6-Sand).
27.78
-
3227
(B-6/ 6.4.2)Extra for facing as per design and detailed specifications including additional cost of stones over item No.6.1 & 6.2 for : Course rubble facing Second sort.
75.4
-
163
(B-12/ 12.9.1)Plaster on new surface on walls in cement sand mortar 1 : 6 including racking of joint etc. complete finefinished : 25 mm thick
95.53
-
193
(B-12/ 12.36.4)Pointing on stone masonary in cement sand mortar 1 : 3 Deep grooved
78.76
-
98
(B-9/9.28.1 + 9.28.3)Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm! long embedded in cement concrete block 15x1 Ox 10cm. of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs anscrews or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with coper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :anit.
-
-
-
(a)Doors
4.4
-
1961
(b) Window side hugs
5.24
-
1826
(c) Ventilation top hugs
3.25
-
1884
(B-9/ 9.31)Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance
5.4
-
470
(B-11/ 11.3.3)Cement concrete flooring grade 1:2:4 (1-cement : 2- coarse sand : 4-graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of steps etc. complete : 50mm thick with 20mm thick nominal size aggregate.
29.85
-
253
(B-12/ 12.56.1)Painting with ready mixed paint of approved brand and manufacture in all shades to give even shade on new steel work ( two or more coat)
30.5
-
34
(B-9/ 9.4)Structural steel work welded in built up sections, trusses and framed work including Cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5 mtr height in R.S. joist flats, tees, angles and channels.
120
-
75
(B-4/ 4.3.1)Reinforced cement concrete work in beams, suspended floors, roofs, griders having slopes up to 15°, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases up to floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good and joints excluding the cost of centering, shuttering and reinforcement: with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)
8.49
-
4729
(B-4/ 4.12.1)Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with wooden members and removal of formwork for superstructure up to 4.5 mtr above plinth, for: Walls (any thickness) including attached pilasters, buttresses plinth and string course.
50.55
-
293
(B-4/ 4.13.3)Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. Hot rolled deformed bars (IS: 1139).
581.95
-
65
(B-3/ 3.2.3)Providing & laying cement concrete including curing compaction etc. complete using stone aggregate 20 mm nominal size in foundation plinth excluding the cost of shuttering using M-15 grade mix 1 : 2 : 4 (1 cement : 4 courese sand : 4 graded stone aggreg
2
-
3608
(B-12/ 12.51.2.1)Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: Old work (one or more coats) including scrapping surface and necessary repairs. Colour Change
85.6
-
68
(B-12/ 12.47.2)Colour washing of all shades to give an even shade including all scaffolding: New work (two or more coats) with a base coat of whiting
105.28
-
12
(B-6/ 6.16.4)Supplying and fixing in walls machine cut andpolished stone shelves, tands and sills in CM 1 : 3with machine cut edges Kota stone 25 to 30mm thick.
3
-
483
(B-5/ 5.10.3)Brick work in partition in super structure upto third storey 7cm. thick (brick on edges) using bricks of class designation 75 in : Cement mortar 1:6 (1 cement: 6 coarse sand)
5
-
471
(B-1/1.32)Filling in plinth with locally available river shingle under floors including watering ramming consolidating and dressing complete including cost of shingles sand.
14.66
-
422
(RUIDP 2027
41.1)Wiring of light point / fan point / exhaust fan point / call bell point with 1.5 sq. mm FR PVC insulated unsheathed 1.1kV grade flexible copper conductor and 1.5 sq.mm FR PVC insulated copper earth conductor (IS:694) of approved make in double lock/ ISI Group 1
-
-
-
(41.1.1)Short point (up to 3 mtr.) Group 1
4
-
230
(41.1.2)Medium point (up to 6 mtr.) Group 1
4
-
322
(47.1)P & F ISI marked (IS :3854) 6 amp. flush type switch including cutting hole in tile and making connection testing etc. as required. Group 1
3
-
17
(47.8)P & F ISI marked (IS :1293) 3 pin 6 amp. flush type socket including cutting hole in tile and making connection testing etc. as required. Group 1
8
-
28
(E071400)P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required. Group 1
5
-
16
(47.11)P & F ISI marked 6 amp bakelite batten/angle holder including making connection testing etc. as required. Group 1
9
-
27
(54.1)Plate Earthing as per IS:3043 with copper Earth plate of size 600mm x 600mm x 3.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer, nipple ,wire meshed funnel, and brick masonary finished chamber covered with ferro cement cover C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required.
1
-
3000
(58.1)P & F IP-43 protected street light luminaire on existing bracket suitable for FTL,made out from CRCA sheet steel finished with stove enamelled paint,having deep drawn aluminium alloy canopy reflector cum control gear tray, clear ribbed acrylic diffuser he 1 X 36 Watts Group 1
2
-
1171
(57.26.2)P & F of IP20 LED batten type light fixture made from CRCA sheet stlle housing suitable for mounting LED tube system (integral driver), Power consumption of 18W/36W, 1500/3000 lumens, system lumen efficiency 80 lm/ watt output, life time of 50000 burning hours with 70% initial lumen maintained. CCT 3000° K, 4000° K and 6000° K.
3
-
1694
4’ LED Tube shape fixture 2x15W
-
-
-
INSTALLATION OF PUMP MACHINERY (BSR RUIDP 2017 & PHED JAIPUR 2019 )
-
-
-
(RUIDP 19.81.9)Supply, delivery at site with necessary packing, receiving, unloading, shifting, storing, installation, testing and Commissioning of Horizontal Centrifugal Split Casting pumps with motor, CI casing and casing ring, SS 316 impeller, SS 410 Shaft and shaft sleeve, coupling guard, common base plate, foundation bolts etc. complete with all respect as per the specification Discharge 31 to 40 LPS and head 51 to 60 M
2
-
192800
(PHED BSR 1.6.1)Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, owering, laying, aligning, fixing in position at all evel/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per :echnical specifications and direction of Engineer-in-charge.VIS pipe specials upto 600mm dia (with minimum 5mm thickness sheet)
3000
-
119
(RUIDP 19.20.2)Providing, lowering, laying, aligning, fixing in position in pipe line, manually operated CI D/F Sluice valves of approved make (IS: 14846 amended upto date) PN 1.0 class of following dia complete (including jointing and jointing material) including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. dia in mm
-
-
-
(19.20.2.5)200 mm
5
-
15400
(19.20.2.6)250 mm
3
-
23700
(RUIDP 19.34.2.6)Providing, lowering, laying, aligning, fixing in position and jointing in pipe line, C.I. dual plate check valves as per API:594 and API:598 of PN 1.0 rating of following dia (including jointing a nd jointing material), including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer Category "B" (Makes / vendors other then Category "A" will be considered in category “B”).
-
-
-
(19.34.1.5)200 mm
3
-
13800
(19.34.1.6)250 mm
3
-
18600
(19.40.6)Providing, lowering, laying, aligning, fixing in position and jointing CI dismantling joint (suitable for sluice valves etc.) as per IS
specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning as per Technical Specifications and as per direction of Engineer. 250 mm dia PN-1.0
8
-
7900
(19.40.5)200 mm
8
-
5650
(19.57.5)Providing, installation, testing and commissioning of Electromagnetic Flow Meter etc. including all materials (excluding CI/DI fittings) and making connection with existing pipeline required for Electromagnetic Flow Meter including cutting the existing pipe line
etc. complete in all respect as per technical specification and as per direction of Engineer. EMF250 for DN 250 mm
1
-
175100
(RUIDP 19.52.2)Providing, installation, testing and commissioning of glycerin filled Pressure gauge of following ranges with isolation valve and tap off pipe complete in all respect as per technical specification and as per direction of Engineer.
0 to 4.0 / 0 to 6.0 / 0 to 10.0 kg/cm²
2
-
1280
RUIDP 2017 (69.6) SITC of Soft Starters with panel supplied by manufacturer conforming to applicable standards with logic inputs & outputs, relay outputs and analogue outputs, plug in I/O connections, display of electrical parameters, state of load & operating time, RS 485 serial link for connections to Modbus.
-
-
-
RUIDP 2017 (69.6.3) 37KW
2
-
100643
(RUDIP 51.6)P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.
-
-
-
(51.6.3)70 Sq.mm
-
-
-
3.5 core
120
-
771
(E110200)P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with Copper conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.
-
-
-
(E110205)10.0 Sq.mm
-
-
-
(E110205C)4 core
40
-
550
(E090700)SITC of quick make and quick break 4 POLE current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 60947-2 / IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip ,earth fault trip, push ( test ) to trip , including making connections with lugs & spreaders, etc. as required.
-
-
-
(E090710)With Thermal Magnetic release
-
-
-
(E090717)250 Amp , 35 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu
2
-
18989
Repairing of JEN Quarter (Based on PWD BSR 2019)
-
-
-
(1.6)Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas(exceeding30 cm in depth.1.5min width as well as 10 sumonplan) including disposal of excavated earth, lead upto 50mandlift upto1.5m, disposed earth be levelled and neatly dressed: All kinds of soil.
21.19
-
191
(12.9.1)Plaster on new surface on walls in cement sand mortar 1 : 6 including racking of joint etc. complete finefinished : 25 mm thick
20
-
193
(12.36.4)Pointing on stone masonary in cement sand mortar 1 : 3 Deep grooved
30
-
98
(9.26.1)Providing & fixing ms sheet single leaf door shutters in angle iron frame 35x35x5 mm suitablly diagonally braced with 25x3mm flat ironabove and below lock rail of size 50x5 mm beading extra includingall fittings, as per direction of engg. incharge but excluding coes of chokhats including two coats of anti corrastie red oxide primer panit.MS sheet 18 SWG
-
-
-
door
30
-
1614
window
19
-
1614
Add extra for double leaf shuttters 20%
36.2
-
322.8
(9.26.6)Add extra over item no. 9.21, 9.22, 9.23, 9.26 for using G.I. sheet instead of MS sheet
36.2
-
88
(9.65)Supply & fixing steel shutter (Almirah type) with 18 gauge steel border & steel shutter including locking arrangement and painting etc. complete fixed on wall with joint fast (iron clip)
10
-
2114
P&F of plastic shutter infill made from multi chamber hollow PVC sections having cross section of 200x20x1mm and shutter frame made from Aluminium C section size 23.6x20x1.8mm and door fitting such as hinges, aldrop, handles, stopper, locking bolt will be provided.Double shutter door
3.6
-
1807
(9.31)Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance
16.2
-
470
(11.3.3)Cement concrete flooring grade 1:2:4 (1-cement : 2- coarse sand : 4-graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of steps etc. complete : 50mm thick with 20mm thick nominal size aggregate.
30
-
253
(12.56.1)Painting with ready mixed paint of approved brand and manufacture in all shades to give even shade on new steel work ( two or more coat)
181.45
-
34
(9.4)Structural steel work welded in built up sections, trusses and framed work including Cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5 mtr height in R.S. joist flats, tees, angles and channels.
420
-
75
(3.2.3)Providing & laying cement concrete including curing compaction etc. complete using stone aggregate 20 mm nominal size in foundation plinth excluding the cost of shuttering using M-15 grade mix 1 : 2 : 4 (1 cement : 4 courese sand : 4 graded stone aggreg
10
-
3608
(12.91)Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete
460
-
75
(12.7.3)Plaster on new surface on wall in cement sand mortar 1:3 including raking of joints etc. complete fine finish :12 mm thick.
85
-
139
(12.53.1)Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding: New work (Three or more coats).
200
-
89
(12.51.1)Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:New work (two or more coats) over and including scrapping and priming coat with cement primer.
460
-
68
(12.46.2)White washing with whiting to give an even shade including all scaffolding :Old work (two or more coats) including scrapping old surface and repairing wherever necessary.
400
-
5
(6.16.4)Supplying and fixing in walls machine cut andpolished stone shelves, tands and sills in CM 1 : 3with machine cut edges Kota stone 25 to 30mm thick.
15
-
483
(5.10.3)Brick work in partition in super structure upto third storey 7cm. thick (brick on edges) using bricks of class designation 75 in : Cement mortar 1:6 (1 cement: 6 coarse sand)
3
-
471
(6.14.2)Supplying and fixing rough dressed stone sills, dassa, coping, cornices sriwan, string courses etc. in cement mortar 1:4 including pointing with admixture of pigment matching with the stone shade : 75 mm thick.
5
-
1506
(7.3)Providing and fixing Ist quality standard White Ivory straight edge Glazed Tiles ISI marked [IS:13753] (Kajariya, Jhonson, Somani make etc. ) of size 450mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster).
95
-
651
(7.2)Providing and fixing Granite stone slab mirror polished and machine edge cut in Walls, Pillars, Steps, Shelves, Sills, Counters. Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 jointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with pigment to match the shade of the marble slab complete including grinding, rubbing and polishing of:
-
-
-
(7.2.4)Green/Black/Other graniteSize above 3600 Cm2
3.25
-
3208
(10.25.4)Providing corrugated G.I. Sheet roofing fixed with G.I. J or L hooks bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coat of approved paint on over lapping of sheet complete (upto a pitch of 600) & excluding the cost of purlins rafters and truses, for class of sheet : 0.80 mm thick.
40
-
772
(14.2.1)Demolishing cement concrete including disposal of material within 50 meter lead :1:3:6 or richer mix.
10
-
569
(13.29.1)Chopping loose and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand blasting, clening with a jet of water / air as necessary and getting it dried with compressed air including all scaffolding: Depth upto 25 mm.
2
-
81
(13.6)Crack filling in masaladar lime cement with water proofing compound including jhiri.
100
-
10
(1.4)P & F European type white glazed vitreous china Ist quality W.C. pan (IS:2556 Mark) with P or S trap including cutting and making good the wall and floor.
1
-
1244
(1.2.2)P & F Indian type white glazed vitreous china Ist quality W.C. orissa pan (IS:2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor :Size 580x440 mm.
2
-
1648
(1.22.1)P & F Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : WVC with C.P. brass bend.
2
-
1559
(1.39.1)P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall :Size 450 mm x 300 mm.
2
-
1507
(1.41.1)P & F kitchen & Lab Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up to floor level complete including cutting and making good the wall & floor IS 771 (Part-II) -1985.Fire clay glazed kitchen sink (IS Marked) size 600x450x250 mm.
1
-
2672
(1.47.2)P&F Beveled edge mirror of special glass of appd make (Atul/equivalent) complete with 6mm thick asbestos cement sheet ground fixed to wooden scrwes & washers.other size
3
-
1010
(1.50.1)C.P. brass Towel rail elbow type with concealed screws size 450mm (heavy duty)
4
-
396
(1.50.8)P&F liquid soap contained with brackets complete of approved make : C.P. brass
4
-
146
(2.1.1)P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors : 15 mm dia nominal bore.Class B
70
-
140
(2.1.4)P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors :(a) Exposed on wall 32 mm dia nominal bore. 'B' Class
20
-
261
(2.7.1)P & F Bib Cock (IS:8931 Mark) Superior quality of approved make :Brass 400 gm. 15 mm nominal bore.
10
-
234
(2.14.7)C.P. brass Half-turn exposed 25 mm nominal bore.
2
-
635
(2.26.4)P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design.750 litres capacity.
2
-
4100
(3.1.1)Providing Laying & jointing glazed S.W. pipes grade `A` (IS;651 marked) of approved make with spun yarn & stiff mixture of cement mortar 1.1 excavation & refilling of earth in all types of soil upto 1.2m depth, S.W. fittings, including testing of joints etc, complete.100mm dia
20
-
109
(3.2.1)Providing & Laying C.C. 1:5:10 (Stone aggregate 40 mm nominal size) all around S.W. pipe including 15 Cm. thick bed concrete as per Rajasthan P.W.D. specifications : (Width W=Diameter of pipe in Cm+40 Cm.)(Excluding cost of pipe).100mm dia S.W. Pipe.
20
-
366
(3.23.1)Construction of chamber in all type of soil with 300 mm thick masonry in Cm 1:6 m 100mm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.Inside size 300x300mm depth upto 0.5m & 5Kg C.I. cover with frame
1
-
516
(3.24.1)Construction of soakage well in all type of soil 300 mm thick dry masonry top and bottom 300 mm course in CM 1:6, 80 mm thick stone slab, jointing of slab in CM 1:3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C. flooring, earth work complete as per approved drawing including disposal of earth within a lead of 50 mtr. :Size 300 Cm. dia outside & 300 Cm. depth.
1
-
11550
(3.19.3)P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia
30
-
240
(2.15.1)P & F Full-way valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 15 mm nominal bore.
3
-
228
(2.14.1)P & F Flush Cock/Flush Valve (IS:9758 Mark) or WC of approved quality make :C.P. brass push type 15 mm nominal bore.
3
-
2212
(RIIDP 2017
41.1)Wiring of light point / fan point / exhaust fan point / call bell point with 1.5 sq. mm FR PVC insulated unsheathed 1.1kV grade flexible copper conductor and 1.5 sq.mm FR PVC insulated copper earth conductor (IS:694) of approved make in double lock/ ISI Group 1
-
-
-
(41.1.1)Short point (up to 3 mtr.) Group 1
10
-
230
(41.1.2)Medium point (up to 6 mtr.) Group 1
30
-
322
(41.1.3)Long point (up to 10 mtr..) Groop 1
10
-
487
(41.3)Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mm FR PVC insulated unsheathed 1.1 kV grade flexible copper conductor and 1.0 sq.mm FR PVC insulated unsheathed 1.1 kV grade copper earth conductor (IS:694) of approved make double lock/ ISI marked si Group 1
-
-
-
(41.3.1)On board Group 1
10
-
79
(47.1)P & F ISI marked (IS :3854) 6 amp. flush type switch including cutting hole in tile and making connection testing etc. as required. Group 1
50
-
17
(47.8)P & F ISI marked (IS :1293) 3 pin 6 amp. flush type socket including cutting hole in tile and making connection testing etc. as required. Group 1
10
-
28
(E071400)P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required. Group 1
20
-
16
(47.11)P & F ISI marked 6 amp bakelite batten/angle holder including making connection testing etc. as required. Group 1
20
-
27
(47.18)P & F ISI marked flush type 120/280 watt rotary step fan regulator including making connection testing etc. as required. Group 1
5
-
221
(54.1)Plate Earthing as per IS:3043 with copper Earth plate of size 600mm x 600mm x 3.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer, nipple ,wire meshed funnel, and brick masonary finished chamber covered with ferro cement cover C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required.
1
-
3000
(55.4)P & F double ball bearing capacitor start ceiling fan of approved make complete with regulator and other accessories as required. (for estimation purpose only)
-
-
-
(55.4.3)1200 mm sweep
1
-
1481
(57.1)P & F strip type fluorscent tube fitting fabricated from CRCA sheet and finished with powder coating / stove enamelled paint complete with accessories like copper wound polyester /open construction (VPIT) ballast, starter,starter seat.rotor holder, termin 1 X 36 Watts Group 1
10
-
287
(58.1)P & F IP-43 protected street light luminaire on existing bracket suitable for FTL,made out from CRCA sheet steel finished with stove enamelled paint,having deep drawn aluminium alloy canopy reflector cum control gear tray, clear ribbed acrylic diffuser he 1 X 36 Watts Group 1
4
-
1171
(47.2)P & F ISI marked (IS :3854) 16 amp. flush type switch including cutting hole in tile and making connection testing etc. as required. Groop 1
5
-
54
(47.9)P & F ISI marked (IS :1293) 3/6 pin 16 amp flush type socket including cutting hole in tile and making connection testing etc. as required. Groop 1
5
-
68
P & F Fluorscent tube rod in existing fixtures as required Flourscent powder coated 36/40 Watts Groop 1
10
-
45
(51.5.4)P/Laying P.V.C. insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I of Group2 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.6.0 sqmm 2 core unarmed compelete.6.0 sqmm 2 core unarmed compelete.
50
-
143
(47.23)P & F ISI marked ding dong/musical chime bell including making connection Groop 1testing etc. as required.
2
-
102
(46.1.1.2)P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/C/D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required. Single pole MCB 6 A to 32 A rating Group 1
8
-
161
(56.2)P & F ISI marked (IS:2082) vertical storage water heater with outer casing made of M.S.sheet finished with anti-corrosive powder coating,inner tank made of pure electrolytic copper/stainless steel , Tubular copper sheathed and Nickel plated heating element/ twin ceremic cartridge heating element, stem type thermostat and thermal cut out,Dual indicating lamps for power supply and thermostat,PUF insulation, Pressure relase valve,fusible plug etc. as required held in position with 4 no. rack bolts,duly wired with 3 core 2.5 Sqmm PVC insulated & sheathed copper conductor and 16 A three pin plug top,including making inlet,outlet heavy gauge C.P. connection,testing etc. as required.GROUP 1
-
-
-
(56.2.5)35 Ltr.
2
-
13864
RISING MAINS (BSR PHED JAIPUR 2019 & PHED JALORE 2014)
-
-
-
(BSR PHED Jalore 1.1)Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended upto date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.
-
-
-
200 mm DI K-7
2149
-
700
( BSR Jalore 2014 12.1.1)Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed within a lead of 50 meter for pipe line work. In All kinds of soil.
661.5
-
174
PART 'B'
-
-
-
Distribution Mains (BSR PHED JAIPUR 2019, PWD JALORE 2019, RUIDP 2017, PHED JALORE 2014)
-
-
-
(BSR CE (TM),2019;1.4)Providing, supplying,Lowering and Laying in standard length HDPE pipes of PE-80 PN-6 pipes confirming to IS 4984-1995 (amended upto date) with necessary jointing material like mechanical connection i.e.thred/insert joint/quick release coupler joint/compression fitting joint or flanged joint and speials jointing pipe by butt fusion weilding method,including all taxes(central and local ),transportation and freight charges,inspection charges,loading,unloading charges,staking the same in closed shade duly protecting from sun rays,including cost of labour and material,specials(tee,bend etc)satisfactory hydraulic testing it is complete as per technical specification and direction of engineer-in-charge(excluding earth work)(supply up to 90 mm dia coil and above 90mm dia straight/length in 6 m)
Note:Providing and fixing of all requisitie specials as per drawing,design and layout are inclusive in RM measurment of the item and shall not be paid seprate.
-
-
-
90 mm
879
-
243
110 mm
1645
-
360
125 mm
532
-
503
140 mm
339
-
625
160 mm
280
-
778
180 mm
84
-
979
200 mm
149
-
1172
225 mm
933
-
1481
(RUIDP 19.20.2)Providing, lowering, laying, aligning, fixing in position in pipe line, manually operated CI D/F Sluice valves of approved ma ke (IS: 14846 amended upto date) PN 1.0 class of following dia complete (including jointing and jointing material) including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer
-
-
-
(19.20.1)80 mm
7
-
4250
(19.20.2)100 mm
5
-
5690
(19.20.4)150 mm
5
-
9230
(19.20.5)200 mm
4
-
15400
(PWD 14.2.1)Demolishing cement concrete including disposal of material within 50 meter lead :
-
-
-
1:2:4 or richer mixture.
83.33
-
495
(RUDIP 2.9.2)Dismentling of Flexible pavement and disposal of material within 50 meter lead for laying of pipe line as per direction of Engineer- In- Charge
36.3
-
206
(PWD 3.2.3)Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to plinth level
-
-
-
1:2:4(1Cement :2 Course Sand :4 Graded stone aggregate 20 mm nominal size
119.75
-
3119
( BSR Jalore 2014 12.1.1)Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed within a lead of 50 meter for pipe line work. In All kinds of soil.
3420
-
174
FHTC
-
-
-
(BSR 2020 01.23)Providing service connection as per technical specification and standard drawing as per relevant IS Code (amended up to date) from all kind of water mains up to consumer meter/premises (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil including demolishing of cement concrete,WBM, Black top etc. Of all thickness; cutting of CC road/jhiri by using a concrete cutter machine; depositing and refilling of pit &jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 50 meter ; providing & fixing of all fitting duly approved in accordance with ISO/DTR 9080 as per specification for potable water including approved make of MS clamp with saddle piece gunmetal ferrule 4.0 mm (ISI make) , gunmetal NRV (ISI make), valve (IS: 778) and specials with MDPE pipe PE 80 PN 12.5 as per ISO 4427, with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . In addition to the ferrule, an orifice of 4.0 mm dia should also be provided in the service line at the entry point of the consumer's property in such a way that it should be accessible for inspection to VWSC, PHED and any other authority which would like to inspect as and when required. The service line should be laid at least 45 CM below ground level, except in cases of concrete/bituminousroadswhen minimum depth shall be20cm.
For detailed specifications of MDPE pipes please refer section "Technical Specifications" of bid document. General specifications of MDPE pipes shall be as under:
• The raw material shall be virgin PE 80 Blue compound and comply with the requirements of ISO/Directive of testing material : 9080 with minimum required strength of 8 Kg/sq.cm.
• The raw material shall be Food grade quality Pressure rating shall be 12.5 Bar.
• The pipes shall bear ISO marking.
-
-
-
(1.23.1)Average length upto 05 mtr 20 mm dia MDPE pipe
700
-
1568
(1.23.2)Extra length of 20 mm MDPE pipe including excavation, providing, laying & jointing of service line above 5.00 mtr.
2975
-
40
(4.1)Data entry of existing FHTCs in rural area under JJM on website ejalshakti.gov.in; work includes visiting the village for collecting basic data consumers like i.e. Aadhar no/ration card/voter ID/BPL card/ PAN card/driving licence/ passport/ Antyodaya card/ mobile no. etc. and entering the details on the above website. The cost also includes computer and operator.
700
-
30
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements