Public Health Engineering Department Tender

3 core 16.0 Sqmm

Supply and fixing tube well cover of MS sheet 8 mm thick at top & 5 mm thick 100 mm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI nipple 45 cm long & two flanges at bollom end in 80 mm sizes passing through a hole in centre of MS sheet. A 25 mm socket with end plug shall also be welded over top plate A GI nipple hacing outside thread of size 1/2" (for installation pressure guage) shall be provided & welded with 80 mm GI nipple near top plate nipple shall be provided with end plug ofor 250 mm dia

Providing & lowering in tube well ISI marked GI pipe "B' class as per IS:1239 or amended up to date threaded and double flanged (welded) on both ends and two number 25x3 mm flat weldded on both ends between pipe & flange, rubber washer 7 nut bolts etc complete in aall respect for 50 mm dia

65 mm dia

80 mm dia

Providing & Lowering in tubewell ISI marked HDPE pipe as per IS 4984:1995 or amended upto date in PE 80 grade and class PN 10 of following dia. including HDPE/GI fittings and PVC rope confirming to IS 5175:1992 or amended upto date, along with clamping of submersible cable etc. complete in all respect. 40 mm dia

50 mm dia

63 mm dia

75 mm dia

90 mm dia

Providing and fixing of double flanged CI body ISI marked NRV of approved make of following size 65 mm dia

80 mm dia

Supplying and installation 100 mm dia sealed diaphragm type pressure guage of range 0 to 10 Kg including all jointing material as per specification with ssafety cover

Supply and installation of 3 phase ISI marked submersible motor pump set of five star rating by BEE as per IS:8034-2011 (pump) and IS;9283-2013 (motor) or amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well / DCB The job includes lowering of pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water main complete in all respect Up to 5.5 KW (7.5 HP & head up to 120 mtr

Up to 5.5 KW (7.5HP & head above 120 mtr

Up to 7.5 KW (10 HP & head up to 120 mtr

Up to 7.5 KW (10HP & head above 120 mtr

Up to 9.3 KW (12.5 HP & head up to 120 mtr

Up to 9.3 KW (12.5HP & head above 120 mtr

Up to 11 KW (15 HP & head up to 120 mtr

Up to 11 KW (15 HP & head above 120 mtr

Up to 13 KW (17.5 HP & head up to 120 mtr

Up to 13 KW (17.5 HP & head above 120 mtr

Up to 15KW (20 HP & head up to 120 mtr

Up to 15KW (20 HP & head above 120 mtr

Supplying and fixing of Electric feeder panel board comprising of suitable rating MCCB, fully automatic star delta startere, over load relay, ampere meter with CTs, voltmeter, phase preventor, suitable starting capacitor, phase indicator, lighting arrangement etc complete suitable for three phase pump sets. The panel should have space for energy meter, All these equipment shall be housed my panel box made out from 18 guage MS sheet with powder coating. Panel should be of minimum size900 mm x 600 mm x 450 mm with stand ( made of angle iron size 35x35x5 mm) duly bolted / screwed with enclosure box having 4 legs each leg's length 18" and double door including in built locking system. The legs should be embedded in M - 15 cement concrete plat form. The size of CC plat form should be equal or bigger than the base size od panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for an 440 volt AC supply. Above 5 Hp and up to 10 HP

Above 10 HP and up to 15 HP

Above 15 HP

Supply & Fixing M S clamp set of 50x6 mm flat from iron with nuts and bolts etc for holding the riser pipe assembly of submersible pump set.

Supply and Fixing of Electric feeder panel (having projected canopy)for submersible pump set Single phase upto 3 HP, comprising of DOL Starter, MCB, Indicating Light, Ammeter, Volt meter, connection plate, condensers of approved make and the panel enclosure should be made out from 18 guage M.S. Sheet with powder coating. Panel size - Height 600 mm, Width 500 mm and Depth 250 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18" and double door including in built locking system. The legs should be embedded in M-15 cement concrete platform.The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The operation of panel should be suitable for 240 Volt AC Supply.

Supply & Installation of single phase ISI marked submersible motor pump set of five star rating by BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect Up to 2.0 KW

Above 2.0 KW

RUIDP SOR 2017 - Providing, lowering, laying, aligning, fixing in position in pipe line, manually operated CI D/F Sluice valves of approved make (IS: 14846 amended upto date) PN 1.0 class of following dia complete (including jointing and jointing material) including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer Category B Size 80 mm

Size 100mm PN 1.6 Pressure rating

Size 125mm PN 1.6 Pressure rating

Size 150mm PN 1.6 Pressure rating

Size 200mm PN 1.6 Pressure rating

Size 250mm PN 1.6 Pressure rating

Size 300mm PN 1.6 Pressure rating