Public Health Engineering Department Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 5,50,16,000Document Cost
₹ 50,000Tender Fee
₹ 2,500
Summary
Retrofitting Work For Providing Water Supply Through Fhtcs In 411 Main Habitations An 418 Other Habitations Of Sub Divisions Peeplu, Todaraisingh And Malpura. (dist. Tonk)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PHCJA_437084_1Tender No
NIT No.03/2024-25 of ACE PHED Region AjmerTender Authority
Public Health Engineering Department ViewPurchaser Address
-Website
http://https://phedwater.rajasthan.gov.in/phed
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Retrofitting work for providing water supply through FHTCs in 411 Main Habitations an 418 Other Habitations of Sub Divisions Peeplu, Todaraisingh and Malpura. (Dist. Tonk) under JJM with Operation and Maintenance for Ten 10 Years After DLP
BOQ Items
... More
200 mm dia
89719
2202
197561238
... More
250 mm dia
23303
2851
66436853
... More
Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work). Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.
Supply of pipe shall be in straight length in 6/12 M.
HDPE PE-100 PN-6
-
-
-
... More
75 mm dia
588770
160
94203200
... More
90 mm dia
143792
228
32784576
... More
110 mm dia
76575
381
29175075
... More
Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by butt fusion/ electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and
direction of Engineer-in-charge of following class and diameter. (excluding earth work). Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.
Supply of pipe shall be in straight length in 6/12 M.
HDPE PE-100 PN-6
-
-
-
... More
125 mm dia
60815
494
30042610
... More
140 mm dia
58074
615
35715510
... More
160 mm dia
31076
773
24021748
... More
180 mm dia
38289
970
37140330
... More
200 mm dia
34706
1162
40328372
... More
225 mm dia
94
1463
137522
... More
Supply laying and pushing of MS casing pipe of specified thickness approved by concerned department authority by trenchless method adopting any suitable technology below ground at required depth under running traffic condition as per Highway/ Railway standard including carrying out survey work at the job site for determining underground cable trenches like telephone, cable, water & sanitary lines and resistivity test for finding the soil strata using necessary equipments for completion of works, mobilizing of machineries and specialized crew at the job site complete in all respect, including excavation of driven pit and exit pit (up to 3 meter depth) with proper protection at these sites with shoring sheets and ISMB. Providing MS cutting edges for front shield and constructing thrust bed at designated level. Necessary dewatering and providing concrete foundation at the base of the driven pit, PVC/Rubber saddle as per the requirement of Highway/Railway authority, crane for handing of pipe and any other machinery, tools, and tackles required, construction of temporary works as per design, drawing and method as per approved by authority specification and the direction of the Engineer.
Apply corrosion, resistant, protection on inside and outside of casing pipe as per technical specification.
-
-
-
... More
300 mm Dia 8 mm thick casing pipe with protective coating.
1000
16737
16737000
... More
400 mm Dia 8 mm thick casing pipe with protective coating.
560
19914
11151840
... More
500 mm Dia 8 mm thick casing pipe with protective coating.
40
20749
829960
... More
Providing and fixing double flanged ISI marked DI Class K-9 pipes as per IS:8329-2000 (amended up to date), as vertical pipes for RCC Reservoirs including specials required such as duck foot bend, bend, tee etc. providing and fixing clamps at every 3 mtr, jointing materials such as nuts, bolt, rubber packing, hydraulic testing etc. complete in all respect up to and from valve chamber as per direction of EIC, Technical Specification and Scope of work.
Note: The rates for DI double flanged pipes shall be reduced 5%, if used other than OHSR pipes.
-
-
-
... More
100 mm
10
1849
18496.5
... More
150 mm
38
2660
101116.1
... More
200 mm
34
3480
118347.2
... More
250 mm
108
4694
507049.2
... More
300 mm
158
5989
946380.5
... More
350 mm
15
7228
108428.25
... More
450 mm
15
10389
155838
... More
Providing and fixing double flanged ISI marked DI Class K-9 pipes as per IS:8329-2000 (amended up to date), as vertical pipes for RCC Reservoirs including specials required such as duck foot bend, bend, tee etc. providing clamps at every 3 mtr, jointing materials such as nuts, bolt, rubber packing, hydraulic testing etc. complete in all respect up to and from valve chamber as per direction of EIC, Technical Specification and Scope of work.
-
-
-
... More
100 mm dia
3275.1
1947
6376619.7
... More
150 mm dia
1341.9
2801
3758661.9
... More
200 mm dia
1759.4
3664
6446441.6
... More
250 mm dia
159.4
4942
787754.8
... More
Manufacturing, supplying ,lowering, laying and jointing in position to correct line spirally welded SAW/Fabricated MS Pipe having bevelled end plates / coils, confirming to IS 3589-2001 or its latest revision/ amendments, for following thickness and inside diameter, including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.), field joints, satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge; (excluding earthwork, internal lining and outer coating). Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.
For Pump Piping
-
-
-
... More
100 mm dia 6.0 mm thick
234
1652
386568
... More
150 mm dia 6.0 mm thick
666
2431
1619046
... More
200 mm dia 6.0 mm thick
387
3210
1242270
... More
250 mm dia 6.0 mm thick
54
3989
215406
... More
300 mm dia 6.0 mm thick
75
3960
297000
... More
350 mm dia 6.0 mm thick
30
5546
166380
... More
400 mm dia 6.0 mm thick
45
6325
284625
... More
450 mm dia 6.0 mm thick
30
7104
213120
... More
600 mm dia 6.0 mm thick
15
9441
141615
... More
Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.
-
-
-
... More
In all types of Soils
-
-
-
... More
upto 1.5 m
517250.05
172
88967008.6
... More
In Soft Rock
-
-
-
... More
upto 1.5 m
143464.25
322
46195488.5
... More
In Hard Rock (Blasting Probihited)
-
-
-
... More
upto 1.5 m
61484.69
674
41440681.06
... More
Providing, lowering, aligning, fixing in position and Jointing in pipe line, DI Body Flanged End Tamper proof Kinetic Air Valve of approved makes of following pressure rating and dia and as per following specifications: Governing standard - AWWA C512/ IS:14845:2000(amended up to date) Body, High pressure cover , Low pressure cover, Cowl and Joint support ring - Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865, FloatLP ball & HP ball : AISI 304 stainless Steel, Seat ring & Gasket - EPDM/NBR ,HP Orifice & HP orifice plug : Bronze/ SS ,Bush: Bronze ,Flanges as per IS/ BS, Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body & cover inside and outside .Fasteners - CS/ Galvanised steel, Outlet of big orifice will have a screen to prevent Tamper of float, with DI metal seated D/F Non rising stem. Sluice Valves as per (IS: 14846 amended upto date) PN 1.6 ratings. Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.
Note: Rates are exclusive of connecting tee, pipe piece and earth work
-
-
-
... More
Class PN 1.6
-
-
-
... More
50 mm dia
905
11637
10531485
... More
Construction of RCC air valve pillar including GI pipes, flanges, bend, MS clamps, rubber sheet, nut bolts/jointing materials etc in M-20 grade cement concrete of 2m height from Natural Ground Level in required shape and size as per approved drawing in all types of soils/rock disposing of surplus excavated materials within a lead of 50 m as per approved drawing complete including all charges at appropriate location in pipeline as per specification mentioned in the scope of work and as per direction of Engineer In Charge. G.I pipes and fittings of dia.
-
-
-
... More
Air valve pillar for air valves size of 80mm dia
905
10491
9494355
... More
Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves straight and pocket less body passage of approved make of following Pressure rating & dia complete, confirfing to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date) ,Epoxy ( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel Insersion rubber of black EPDM 6mm thick . Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
80 mm dia
493
5432
2677976
... More
100 mm dia
68
7456
507008
... More
125 mm dia
71
9632
683872
... More
150 mm dia
71
11720
832120
... More
200 mm dia
42
19485
818370
... More
250 mm dia
7
30795
215565
... More
Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS (AISI 316 or equivalent) Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge.
Manually Operated Resilient Seated Sluice Valves of Class PN 1.6
-
-
-
... More
80 mm dia
62
7877
488374
... More
100 mm dia
683
9960
6802680
... More
125 mm dia
54
14730
795420
... More
150 mm dia
282
16473
4645386
... More
200 mm dia
188
25341
4764108
... More
250 mm dia
39
42053
1640067
... More
300 mm dia
14
53559
749826
... More
350 mm dia
3
100494
301482
... More
400 mm dia
3
131616
394848
... More
450 mm dia
2
175696
351392
... More
600 mm dia
1
332114
332114
... More
Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN- 1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG- 400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date)
/Din 3202 F4, Stem/ spindle of SS (AISI 316 or equivalent) Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
Motorized Sluice Valves with Electric Actuator and integral starter of Class PN 1.6 On Individual Delivery Pipe
-
-
-
... More
100 mm dia
20
107537
2150740
... More
150 mm dia
52
120432
6262464
... More
200 mm dia
24
133923
3214152
... More
Providing, lowering, laying, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning Technical Specifications and as per direction of Engineer. Class PN 1.0
-
-
-
... More
80 mm dia
555
2715
1506825
... More
100 mm dia
713
3160
2253080
... More
125 mm dia
125
4131
516375
... More
150 mm dia
234
4964
1161576
... More
200 mm dia
149
7383
1100067
... More
250 mm dia
36
10111
363996
... More
300 mm dia
11
12218
134398
... More
350 mm dia
1
15730
15730
... More
450 mm dia
1
24790
24790
... More
Providing, lowering, laying, aligning, fixing in position and jointing MS dismantling joint (Fabricated Steel) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning Technical Specifications and as per direction of Engineer.
-
-
-
... More
100 mm dia
38
4423
168074
... More
150 mm dia
120
8262
991440
... More
200 mm dia
84
10186
855624
... More
250 mm dia
11
13201
145211
... More
300 mm dia
4
16484
65936
... More
350 mm dia
2
23102
46204
... More
400 mm dia
3
30866
92598
... More
450 mm dia
1
36301
36301
... More
600 mm dia
1
56355
56355
... More
Construction of Scour Valve Chamber in required size and shape as per drawing including required excavation of earth in all types of soil such as murrum, sand, sandy silt, black cotton soil, hard soil, kankar and all types of rocks etc.,disposing of surplus excavated material within a lead of 50 meters. The work includes laying of 100 mm thick plain cement concrete 1:4:8(1 cement : 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) in bedding and foundation, construction of 150 mm thick RCC walls in M-20 grade C.C., covering it with class -A loading ferro cement covers of required sizes and complete with removal of excess material and making clean the site upto the satisfaction of Engineer in charge
-
-
-
... More
1200 X 900 X 1450 mm upto 150 mm
1170
18444
21579480
... More
1500 x 1200 x 1550 mm 200 to 300 mm
126
25888
3261888
... More
Construction of Junction Chamber in required size and shape as per drawing including required excavation of earth in all types of soil such as murrum, sand, sandy silt, black cotton soil, hard soil, kankar and all types of rocks etc.,disposing of surplus excavated material within a lead of 50 meters. The work includes laying of 100 mm thick plain cement concrete 1:4:8(1 cement : 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) in bedding and foundation, construction of 150 mm thick RCC walls in M-20 grade C.C., covering it with class -A loading ferro cement covers of required sizes and complete with removal of excess material and making clean the site upto the satisfaction of Engineer in charge
358
41932
15011656
... More
Providing, lowering, aligning and fixing in position DI D/F Diaphragm type Pressure Reducing / Flow Control Valve of approved make of following Pressure rating & dia complete and of following specifications: Body & Bonet - Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or ASTM A 536, Diaphragm and Resilient seal disc - Flexible, non-wicking nylon fabric reinforced synthetic elastomer -Buna-N / EPDM (FDA / WRAS approved), Body Seat Ring - Cast stainless steel ASTM- A 351 GR. CF8M / AISI- 316, raised, replaceable inline & onsite Stem - Stainless Steel, AISI-316, raised, replaceable inline & onsite Spring & Bearing bush- Stainless Steel, AISI-316 ,Disc guide, disc retainer & diaphragm washer - Stainless Steel, AISI-304/ 316/Bronze ,Seal- EPDM/ NBR ,Pilot Body- Stainless Steel, AISI-304/ CF8 or Brass Tubing - Stainless Steel, AISI-304 / Copper ,Solenoid Valve- Stainless Steel, AISI-316 ,Throttling plug - Stainless Steel, AISI-304, Nut- Bolts - SS Face to Face- as per ANSI B 16.1/ EN 558-1 and Flange ends should be as per ANSI B-16.5, Class 150 and Class 300/ EN-1092-2. nsersion rubber of black EPDM 6mm thick Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied both inside and outside. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning as per Technical Specification & as per direction of Engineer-In- Charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. Pilot operated SCADA Compitable Diaphragm Type Pressure Reducing Valves (Class PN 1.6)
-
-
-
... More
250 mm dia
5
246193
1230965
... More
SITC of Bulk Flow Meter with removable mechanism class "B" confirming to ISO:4064:2005/ IS: 2373 of approved make of following dia sized pipelines and specifications complete: Media : Water (Clear ), Temp. 50 deg., Pr. rating: PN16, Protection type: IP- 68, Body Material : IS-210 Gr. FG-200, Accuracy Class :Class B (±2 % @ Nominal flow rate), Magnetic Drive, Dry Dial, Epoxy powder coated, Pulse out put option, Anti-magnetic protection including all materials and making
connection with existing pipeline required for Bulk Flow Meter including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In-Charge.
Note: Rates are exclusive of tail piece / dismantling joints and earth work.
-
-
-
... More
80 mm dia
22
10938
240636
... More
100 mm dia
107
13359
1429413
... More
125 mm dia
54
18559
1002186
... More
150 mm dia
31
20709
641979
... More
200 mm dia
16
26219
419504
... More
250 mm dia
7
60321
422247
... More
Construction of Village Transfer Chambers Room Type-A and B
179
69905
12513084.5
... More
GSM Modem for SMS Facility-24 V DC operated bulk flow meter to transmit reading of flow meter to LCC/MCC Centre
58
24799
1438342
... More
Dismantling of flexible pavement for pipe line and chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work.
-
-
-
... More
Bituminous courses
9783.71
362
3541703.02
... More
Granular courses
14675.59
259
3800977.81
... More
Dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work.
42997.58
653
28077419.74
... More
Providing and laying in position cement concrete M10 grade nominal mix 1:3:6 (1 Cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work.
32943.06
4033
132859376.24
... More
Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work.
-
-
-
... More
M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).
4493.13
5312
23867506.56
... More
Plain cement concrete pavement of M-30 Grade
30019.47
5601
168139051.47
... More
Supply, installation, testing and commissioning of MNRE approved Grid tied Solar Panels with inverter, meter, cable etc. suitable for Rooftop installation as well as Utility Scale Solar Power Projects with 25 years of Linear Generation warranty. Work includes designing of solar panel area and MS frame and foundation on ground/roof of Pump house or CWR, showing arrangement of panel in available space, installation of PV module on MS frame as per approved design and drawings. Mounting structure shall be suitably designed to withstand wind velocity up to 150km/hr. Grid Tie Transformer less inverters, Multiple independent MPPTs, Peak efficiency of 98%. Connect up to multiple strings PV arrays, Easy & fast connection, Built-in string-level monitoring, IP65 protection level, Wi-Fi / internet based remote monitoring with 5 years warranty. All cabling up to panel and metre, earthing etc. required accessories and taxes are inclusive. The work shall be executed as per detailed technical specifications, approved drawing and direction of Engineer in Charge. Note: There shall be 5 year service warranty for panel, inverter, meter, cable etc. and suitable provision shall be included in tender document.
58000
57
3306000
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:
2900
69
200100
... More
Providing Household Tap Connection as per technical specification and approved drawing as per relevant IS code (amended up to date) from uPVC/DI/AC/MS/GI pipe line up to consumer meter/premises by using PVC/MS saddle piece (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil (excluding road); depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including MS/PVC saddle piece, gunmetal ferrule 4.0 mm , GM Full-way Valve (IS:778 Mark) or wheel valve and specials, below ground level 20 mm nominal dia MDPE pipe PE 80 PN 16 as per ISO 4427 / 20 mm nominal dia PPR-C (Three layered) pipe PN16 SDR 7.4 (IS:15801:2008) (ISI mark) and above ground level using 20 mm dia PPR-C pipe with standard PPR fittings/ 15 mm dia GI pipe with fittings in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . The service line should be laid at least 45 cm below ground level.
Note: Road cut and restoration is not part of this item and paid seperately.
-
-
-
... More
For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr.
114
1429
162906
... More
Providing Household Tap Connection as per technical specification and approved drawing and as per relevant IS code (amended up to date) from HDPE pipe line up to consumer meter/premises by using electro fusion saddle piece (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including electrofusion saddle piece, gunmetal ferrule 4.0 mm , GM Full-way Valve (IS:778 Mark) or wheel valve and specials, below ground level 20 mm nominal dia MDPE pipe PE 80 PN 16 as per ISO 4427 / 20 mm nominal dia PPR-C (Three layered) pipe PN16 SDR 7.4 (IS:15801:2008) (ISI mark) for and above ground level using 20 mm dia PPR-C pipe with standard PPR fittings/ 15 mm dia GI pipes with fittings in the premises for fixing a tap / meterbox (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . The service line should be laid at least 45 cm below ground level.
Note: Road cut and restoration is not part of this item and paid seperately.
-
-
-
... More
For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr.
33756
1786
60288216
... More
P& F Bib cock (IS : 8931 mark), superior quality of approved make , brss 400 gm, 15 mm nominal bore.
33870
271
9178770
... More
Road cutting for house hold service connection in minimum trench width whereever road crossing is required. Road cutting of cement concrete,WBM, Black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with Cement concrete with PCC M-10 and CC M-30 grade as per specification and direction of Engineer in charge.
67740
172
11651280
... More
Add extra over item no 1.21 & 1.22 for providing 20 mm PE 80 PN 16 as per ISO 4427 MDPE pipe including excavation, providing, laying & jointing of service line above 5.00 mtr.
16935
40
677400
... More
Construction of Pump house of required size suitable for installation of maximum 4 no. monoblock pump sets as per approved GA drawing, scope of work and technical specification complete work in all respect including electrical works for lighting and fans, rain water drainage. The plinth area of pump house shall be area of measurement.
-
-
-
... More
Extension of Bagri PH
151
17485
2640235
... More
Extension of Teelanju
151
17485
2640235
... More
Extension of Diggi
192.3
17485
3362365.5
... More
Chosla CPS PH
115
17485
2010775
... More
Extension of Khareda PH
115
17485
2010775
... More
Sawariya malpura PH
75
17485
1311375
... More
Providing, installation, testing, trial run and commissioning of the following, as per specifications (HSC Pumps)
-
-
-
... More
CPS BAGRI to MCL-61 SAC OHSR SINDHOLIYA 250KL route 14 LPS / 75 m head/22 KW (1W+1S)
44
8100
356400
... More
PH LAMBA HARSINGH to MCL-59 SAC OHSR KALI HARDIYA 100KL, MCL-60 SAC OHSR MORALA 150KL, MCL-58 SAC OHSR DOKARIYA 100KL, MCL-55 EX. OHSR ANTOLI 150KL, MCL-54 SAC. OHSR ANTOLI 100KL, MCL-60 EX. OHSR MORLA 200KL route 18 LPS / 60 m head/22 KW (1W+1S)
44
8100
356400
... More
CPS-TILANJU,TCL-02 OTMP-ESR SHRIRAMPURA 150 KL route 19 LPS / 65 m head/30 KW (1W+1S)
60
8100
486000
... More
TILANJU PH to BAO-2A EX. OHSR TEELAMJU 250KL route 19 LPS / 64.27 m head/30 KW (1W+1S)
60
8100
486000
... More
CPS DIGGI, MCL-10-3 SEX. OHSR CHAND SEN 150KL route 19 LPS / 70 m head/30 KW (1W+1S)
60
8100
486000
... More
IPS MOR to TCL-29-2 EX. OHSR PANWALIYA 200KL route 15 LPS / 70 m head/22 KW (1W+1S)
44
8100
356400
... More
IPS MOR to TCL-32 OTMP ESR NEEMERA 150KL 20m route 16 LPS / 75 m head/30 KW (1W+1S)
60
8100
486000
... More
CPS PACHEWAR to MCL-93 SAC. OHSR MALIKPUR 150KL route 17 LPS / 70 m head/22 KW (1W+1S)
44
8100
356400
... More
Providing, installation, testing and commissioning of Centrifugal Monoblock pump set conforming to IS 9079 , 2 pole motor operating at syncronised speed of 3000 RPM with requisite MOC impeller, priming funnel, cock, suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply. Motor shall be TEFC type and Pump set shall be suitable for working at various discharge and head requirements as per scope of work. Pump shall be erected on C.C. foundation / cross channels / RSJ frame block with suitable foundation bolts grouted in C.C. foundation block etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions mentioned in TD.
-
-
-
... More
CPS BAGRI to MCL-39 EX. OHSR KANTHOLI 200KL route 18 LPS / 55 m head/18.5 KW (1W+1S)
2
123818
247636
... More
IPS-BAORI to TCL-19 B EX-ESR KHAREDA 110 KL 20M, TCL-07 PRO-ESR BALAPURA JATAN 50KL 15M, TCL-20 PRO-ESR PANDRAHERA 100KL 20M route 12 LPS / 70 m head/18.5 KW (1W+1S)
2
123818
247636
... More
IPS TILANJU route 20 LPS / 50 m head/18.5 KW (1W+1S)
2
123818
247636
... More
CPS-TILANJU,MCL-03 EX-ESR TEELANJU 250 KL route 9 LPS / 35 m head/7.5 KW (1W+1S)
2
58202
116404
... More
CPS CHOGAI, PCL-1 PRO. OHSR CHOGAI 150KL route 18 LPS / 40 m head/15 KW (1W+1S)
2
93815
187630
... More
IPS JHIRANA PCL-10 EX OHSR BEEJWAR 125 KL route 20 LPS / 50 m head/18.5 KW (1W+1S)
2
123818
247636
... More
IPS MALPURA,MCL-66 SAC OHSR DORAI 150KL route 7 LPS / 40 m head/7.5 KW (1W+1S)
2
58202
116404
... More
CPS SAWARIYA route 23 LPS / 35 m head/18.5 KW (1W+1S)
2
123818
247636
... More
IPS MOR to TCL-38 PRO-ESR KUKKAD 50KL,TCL-39 EX. OHSR MOR 200KL,TCL-18 PRO ESR FALOLAV 75KL 15m route 7 LPS / 40 m head/7.5 KW (1W+1S)
2
58202
116404
... More
IPS NATHARI PH PCL-33 EX. OHSR NATHARI 115 KL, PCL-31 EX. OHSR GALOD 100KL, PCL-31 SAC. OHSR GALOD 100KL route 7 LPS / 40 m head/7.5 KW (1W+1S)
2
58202
116404
... More
CPS PEEPLU route 11 LPS / 35 m head/11 KW (1W+1S)
2
71679
143358
... More
IPS-TODA to TCL-50 OTMP OHSR TOPA 100KL route 13 LPS / 65 m head/18.5 KW (1W+1S)
2
123818
247636
... More
IPS-TODA to TCL-68 EX OHSR LADPURA 150KL route 11 LPS / 70 m head/18.5 KW (1W+1S)
2
123818
247636
... More
IPS-TODA to TCL-60 OTMP OHSR GOLA HERA 150KL route 14 LPS / 60 m head/18.5 KW (1W+1S)
2
123818
247636
... More
IPS-TODA to TCL-42 OTMP OHSR SANDLA 100KL route 5 LPS / 35 m head/5.5 KW (1W+1S)
2
47608
95216
... More
CPS KHAREDA route 17 LPS / 55 m head/18.5 KW (1W+1S)
2
123818
247636
... More
Khareda PH TCL-55 EX. OHSR KHAREDA 200KL route 14 LPS / 60 m head/18.5 KW (1W+1S)
2
123818
247636
... More
Khareda PH TCL-63 OTMP OHSR SETIWAS 150KL route 10 LPS / 55 m head/11 KW (1W+1S)
2
71679
143358
... More
PCL-22-3 EX-ESR PEEPLU 300 KL route 15 LPS / 50 m head/15 KW (1W+1S)
2
93815
187630
... More
Providing and fixing at site with necessary packing, Horizontal Centrifugal Split Casting pumps with 4 pole induction motor operating at syncronised speed of speed 1500 RPM as per IS 12615: 2011 or amended up to date , CI casing and casing ring, SS 316 impeller, SS 410 Shaft and shaft sleeve, coupling guard, common base plate, foundation bolts, Cement concrete foundation etc. complete with all respect as per the specification and scope of work and direction of Engineer in Charge of following range of duty conditions.
Note: Duty condition of required pump shall also be mentioned in BoQ.
-
-
-
... More
CPS LAMBA route 32 LPS / 75 m head/45 KW (1W+1S)
2
424582
849164
... More
PH LAMBA HARSINGH to MCL-62 SAC. route 26 LPS / 45 m head/22 KW (1W+1S)
2
246236
492472
... More
IPS-BAORI to TCL-14 EX. OHSR route 33 LPS / 65 m head/55 KW (1W+1S)
2
424582
849164
... More
CPS CHOGAI, , PCL-4 EX. OHSR KATHMANA 200KL route 28 LPS / 70 m head/37 KW (1W+1S)
2
360058
720116
... More
CPS DIGGI, MCL-11 OTMP ESR BHEEPUR 100 KL route 26 LPS / 55 m head/30 KW (1W+1S)
2
282163
564326
... More
CPS DIGGI, MCL-28-3 SAC OHSR DIGGI 150KL route 31 LPS / 70 m head/55 KW (1W+1S)
2
424582
849164
... More
Pro. CPS CHOSLA route 31 LPS / 50 m head/30 KW (1W+1S)
2
282163
564326
... More
CPS CHOSLA,MCL-27 SAC OHSR KIRWAL 200KL route 20 LPS / 70 m head/30 KW (1W+1S)
2
360058
720116
... More
CPS CHOSLA, MCL-19 SAC. OHSR CHAINPURA 100KL route 22 LPS / 55 m head/30 KW (1W+1S)
2
282163
564326
... More
JHIRANA IPS TO CHOGAI PH route 34 LPS / 60 m head/55 KW (1W+1S)
2
360058
720116
... More
IPS JHIRANA PCL-12 EX OHSR JHIRANA 350KL route 31 LPS / 50 m head/30 KW (1W+1S)
2
282163
564326
... More
IPS JHIRANA PCL-9 PROP OHSR NAYATEELA 150KL route 22 LPS / 50 m head/22 KW (1W+1S)
2
246236
492472
... More
IPS MALPURA, MCL-22 SAC. OHSR GHATI 100KL route 21 LPS / 65 m head/30 KW (1W+1S)
2
360058
720116
... More
IPS MALPURA to MCL-69 SAC OHSR KESHAVNAGAR 100KL route 23 LPS / 75 m head/55 KW (1W+1S)
2
360058
720116
... More
IPS BAGRI route 46 LPS / 60 m head/55 KW (1W+1S)
2
424582
849164
... More
IPS DIGGI route 31 LPS / 70 m head/55 KW (1W+1S)
2
424582
849164
... More
IPS NATHARI PH PCL-24 PRO. OHSR MASOODPURA 150KL route 36 LPS / 75 m head/55 KW (1W+1S)
2
424582
849164
... More
IPS NATHARI PH PCL-28 PRO. OHSR BAGRI 250KL route 25 LPS / 65 m head/55 KW (1W+1S)
2
360058
720116
... More
CPS PACHEWAR to MCL-72 OTMP OHSR DORIYA 100KL route 22 LPS / 75 m head/55 KW (1W+1S)
2
360058
720116
... More
CPS PACHEWAR to MCL-77 SAC OHSR RAJPURA BAS 150KL route 34 LPS / 55 m head/55 KW (1W+1S)
2
360058
720116
... More
CPS SAWARYA, MCL-36 OTMP ESR LAMYA JOONARDAR 150KL route 31 LPS / 65 m head/55 KW (1W+1S)
2
424582
849164
... More
Providing, installation, testing and commissioning of following Stain less steel AISI 304 Expansion bellows of 10/16 bar rating with tie rods as per technical specifications and layout drawings including jointing material like nuts, bolts, rubber gaskets etc. complete in all respect as per technical specification and direction of Engineer In-Charge.
-
-
-
... More
100 mm dia
20
7189
143780
... More
150 mm dia
52
9866
513032
... More
200 mm dia
24
11167
268008
... More
SITC of D/F Full bore type Electromagnetic Flow Meter of approved make of following dia and specifications complete: Media : Water (Raw/ Chlorinated) , Pressure : up to 1.5MPa, Process temp: - 50 deg C, Flow/Meter Tube : SS 304, Electrode : SS AISI 316L / Hastelloy C276/ Tantalum, Lining Material : Hard Rubber/ Neoprene / Poly-urethane (PU) , Flange : SS / CS, Flange Standard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Cast Aluminium, with anticorrosive paint & provide completely sealed (leak proof) construction as per requirement of IEC 60529, Accuracy : ± 0.5 % M.V.- velocity 0.3 to 10 m/s, Transmitter/ signal convertor Enclosure : Die Cast Aluminium, Power Supply : 80-240 V AC - 50Hz, Output 1 : 4-20 mA, Output 2: Pulse, Communication Output : RS 485/ Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parameters and totalizer value during power failure, Protection category- IP 68 for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, if required, and all materials required for making connection with existing pipeline including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In-Charge. Note: Rates are exclusive of tail piece / dismantling joints and earth work.
-
-
-
... More
100 mm dia
10
101884
1018840
... More
150 mm dia
27
125776
3395952
... More
200 mm dia
15
130542
1958130
... More
250 mm dia
1
155982
155982
... More
300 mm dia
1
188460
188460
... More
Providing, lowering, aligning, fixing in position in pipe line, DI double flanged resilient seated Dual plate check valave of approved make of following Pressure rating & dia complete, as per API: 594/ API: 598 and of following specifications: Body & Bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Disc / plates - SG-400/12 or CF-8M,Face to face dimensions as per API: 594 , Flanges Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body and cover inside and outside . Disc seal ring of EPDM/ Neoprene (food grade quality) and disc seal retaining ring of SS/CS. Shaft of SS- AISI- 304/410 , Hinge SS AISI 316/304,Spring SS AISI 316/304,Bonnet Gasket EPDM ,Bush- Brass with EPDM/NBR "O "ring seal, Nut-Bolt confirming to IS:1363 and IS: 1367 (galvenised steel) , Insersion rubber of black EPDM 6mm thick .Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
100 mm dia
20
11519
230380
... More
150 mm dia
52
18052
938704
... More
200 mm dia
24
31474
755376
... More
Construction of Flow Meter Chamber in required size and shape as per drawing including required excavation of earth in all types of soil such as murrum, sand, sandy silt, black cotton soil, hard soil, kankar and all types of rocks etc.,disposing of surplus excavated material within a lead of 50 meters. The work includes laying of 100 mm thick plain cement concrete 1:4:8(1 cement : 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) in bedding and foundation, construction of 150 mm thick RCC walls in M-20 grade C.C., covering it with class -A loading ferro cement covers of required sizes and complete with removal of excess material and making clean the site upto the satisfaction of Engineer in charge
48
106807
5126736
... More
Supplying, erecting, testing & commissioning of Electrically Operated Travelling Crane (EOT) .Main girder & End Carriage fabricated from Rollled Steel Section, Gear Box for all motion, Electro Magnetic Friction Disc Type Brakes, all safety limit switches, LT wheels EN 9, Double Flanged 4No, with Sq. Cage motor of adequate rating (KW), duly painted mechanical cleaning and one coat of primer and two coat of synthetic paint and as per the direction of the Engineer.
-
-
-
... More
2 MT (Span 7 M and Lift 6 M)
2
373700
747400
... More
Construction of RCC (Flat slab type) Clear Water Reservoir of following capacity as per the Scope of work and Technical specification, consisting of the following main activities: -
-
-
-
... More
a) Topographic survey, preparation of site contour plan, conducting SBC test and its approval from department before construction. Submission and approval of concrete mix design and water quality test report for water to be used in construction. b) Excavation in all types of soil, PCC below foundation & all RCC Work including all labour and material charges including providing and fixing of accessories such as SS ladder, SS manhole frame and covers, water level indicator (float type), SS ventilator with SS screen, float valve, puddle collars, G.I. pipe railing around walk way, Top Dome/Slab, Staircase.
c) CWR shall be provided with adequate plinth protection all around the structure in a width starting from edge of structure at GL and extending at least up to 1.0m beyond the vertical wall of CWR. The plinth protection shall consist of 150mm thick PCC in M-15 concrete over 150mm thick compacted soil fill.
d) Providing and applying two coats of food grade epoxy paint on the inside surface of the roof slab, and 600 mm height of the vertical wall. e) Successful hydro test and water tightness test as per I.S. code.
f) Providing and applying three coats of anti-carbonation paint on the roof Slab.
g) Providing and applying three coats of cement-based paint on the remaining external surface area of the structure.
-
-
-
... More
h) Providing and fixing SS-304 ventilator, SS 304 manhole frame and cover and SS 304 ladder from roof slab to bottom Slab, inside container. Providing and fixing water level indicator (Float type).
i) Providing and fixing MS ladder from ground to top slab. j) All MS parts to be painted with two coats of the enamelled paint over the primer coat of red oxide.
k) Providing and fixing of 150mm wide water bar for the construction joints in the container.
l) Providing and fixing CI/DI puddle collars the vertical wall for connecting inlet, outlet, overflow and washout pipes of the reservoir.
m) Inlet, outlet, overflow, washout pipes and valves are not included in this work, provision for the same shall be taken separately.
-
-
-
... More
Rates for RCC Partially Underground type clear water reservoir SBC 7 T/sqm, SEISMIC ZONE-2,3 & 4
-
-
-
... More
KHAREDA
150000
6
937500
... More
Teelanju
150000
6
937500
... More
SANWARIYA
250000
5
1350000
... More
Construction of RCC (Dome type) Clear Water Reservoir of following capacity as per Scope of work and Technical specification, consisting of the following main activities: -
-
-
-
... More
a) Topographic survey, preparation of site contour plan, conducting SBC test and its approval from department before construction. Submission and approval of concrete mix design and water quality test report for water to be used in construction. .
b) Excavation in all types of soil, PCC below foundation & all RCC Work including all labour and material charges including providing and fixing of accessories such as SS ladder, SS manhole frame and covers, water level indicator (float type), SS ventilator with SS screen, float valve, puddle collars, G.I. pipe railing around walk way, Top Dome/Slab, Staircase.
c) CWR shall be provided with adequate plinth protection all around the structure in a width starting from edge of structure at GL and extending at least up to 1.0m beyond the vertical wall of CWR. The plinth protection shall consist of 150mm thick PCC in M-15 concrete over 150mm thick compacted soil fill.
d) Providing and applying two coats of food grade epoxy paint on the inside surface of the roof slab, and 600 mm height of the vertical wall. e) Successful hydro test and water tightness test as per I.S. code.
f) Providing and applying three coats of anti-carbonation paint on the roof Slab.
g) Providing and applying three coats of cement-based paint on the remaining external surface area of the structure.
-
-
-
... More
h) Providing and fixing SS-304 ventilator, SS 304 manhole frame and cover and SS 304 ladder from roof slab to bottom Slab, inside container. Providing and fixing water level indicator (Float type).
i) Providing and fixing MS ladder from ground to top slab. j) All MS parts to be painted with two coats of the enamelled paint over the primer coat of red oxide.
k) Providing and fixing of 150mm wide water bar for the construction joints in the container.
l) Providing and fixing CI/DI puddle collars the vertical wall for connecting inlet, outlet, overflow and washout pipes of the reservoir.
m) Inlet, outlet, overflow, washout pipes and valves are not included in this work, provision for the same shall be taken separately.
-
-
-
... More
Rates for RCC Partially Underground type clear water reservoir SBC 7 T/sqm, SEISMIC ZONE2,3
-
-
-
... More
BAGARI
350000
5
1963500
... More
Chosla
350000
5
1963500
... More
DIGGI
550000
4
2519000
... More
Construction and commissioning of RCC flat slab Over Head Service Reservoir of following capacity and staging including all material and labour charges as per the Scope of work and Technical Specification, consisting of the following main activities: -
-
-
-
... More
a) Topographic survey, preparation of site contour plan, conducting SBC test and its approval from department before construction. Submission and approval of concrete mix design and water quality test report for water to be used in construction. b) Excavation in all types of soil, PCC below foundation, all RCC Work, Plinth protection all around the structure including all material, labour, shuttering, scaffolding etc.
c) OHSR shall be provided with adequate plinth protection all around the structure in a width starting from edge of structure at GL and extending at least up to 1.0m beyond the edge of outer most projection of OHSR. The plinth protection shall consist of 150mm thick PCC in M-15 grade concrete laid over 150mm thick layer of compacted soil. d) Providing and applying two coats of food grade epoxy paint on the inside surface roof slab, and 600 mm height of the vertical wall.
e) Successfully hydro test and water tightness test as per I.S. code.
f) Providing and applying three coats of anti-carbonation paint on the top surface of the roof slab.
g) Providing and applying three coats of cement-based paint on the external surface of the container, balcony, cone wall, columns & beams etc.
h) Providing and fixing SS-304 ventilator, SS 304 manhole frame and cover and SS-304 ladder from top Slab to bottom Slab inside container. i) Providing and fixing of MS section ladder from the last landing to balcony and MS ladder with safety cage from balcony to top slab.
-
-
-
... More
j) Providing and fixing water level indicator (float type).
k) Providing and fixing of hand railing all around the balcony, roof and staircase, consisting of 25mm diameter Class-B GI pipe in two rows and 1000 mm high, 50X50X6mm angle iron vertical post at a maximum spacing of 1500mm centres.
l) All MS parts to be painted with two coats of the enamel paint over the primer coat of red oxide.
m) Providing and fixing of 150mm wide PVC water bar for the construction joints in the container (vertical wall & cone wall).
n) Providing one Aluminium portable ladder of appropriate length to access first landing (3.5 to 4.5m above GL) from ground.
o) Lighting arrestor consisting of providing and fixing of 2 Nos. of chemical earthing and connecting it to the conical cover of SS ventilator with two separate GI strips of 50mmX3mm
p) CI/DI puddle collar shall be fixed in the bottom/slab for connecting inlet, outlet, overflow and washout pipe of the reservoir.
q) Painting the name of the scheme and other details on the reservoir, and any other work related to structure as per the directions of Engineer-in- Charge, Technical Specification and Scope of Work.
r) Inlet, outlet, overflow, washout pipes and valves are not included in this work, provision for the same shall be taken separately.
-
-
-
... More
Rates for RCC OHSR,SBC 10 T/sqm, SEISMIC ZONE-II & STAGING 15 M
-
-
-
... More
50 KL, staging Height 15 m (1-Nos.)
50000
35
1761000
... More
Construction and commissioning of RCC flat slab Over Head Service Reservoir of following capacity and staging including all material and labour charges as per the Scope of work and Technical Specification, consisting of the following main activities: -
-
-
-
... More
a) Topographic survey, preparation of site contour plan, conducting SBC test and its approval from department before construction. Submission and approval of concrete mix design and water quality test report for water to be used in construction. b) Excavation in all types of soil, PCC below foundation, all RCC Work, Plinth protection all around the structure including all material, labour, shuttering, scaffolding etc.
c) OHSR shall be provided with adequate plinth protection all around the structure in a width starting from edge of structure at GL and extending at least up to 1.0m beyond the edge of outer most projection of OHSR. The plinth protection shall consist of 150mm thick PCC in M-15 grade concrete laid over 150mm thick layer of compacted soil. d) Providing and applying two coats of food grade epoxy paint on the inside surface roof slab, and 600 mm height of the vertical wall.
e) Successfully hydro test and water tightness test as per I.S. code.
f) Providing and applying three coats of anti-carbonation paint on the top surface of the roof slab.
g) Providing and applying three coats of cement-based paint on the external surface of the container, balcony, cone wall, columns & beams etc.
h) Providing and fixing SS-304 ventilator, SS 304 manhole frame and cover and SS-304 ladder from top Slab to bottom Slab inside container. i) Providing and fixing of MS section ladder from the last landing to balcony and MS ladder with safety cage from balcony to top slab.
-
-
-
... More
j) Providing and fixing water level indicator (float type).
k) Providing and fixing of hand railing all around the balcony, roof and staircase, consisting of 25mm diameter Class-B GI pipe in two rows and 1000 mm high, 50X50X6mm angle iron vertical post at a maximum spacing of 1500mm centres.
l) All MS parts to be painted with two coats of the enamel paint over the primer coat of red oxide.
m) Providing and fixing of 150mm wide PVC water bar for the construction joints in the container (vertical wall & cone wall).
n) Providing one Aluminium portable ladder of appropriate length to access first landing (3.5 to 4.5m above GL) from ground.
o) Lighting arrestor consisting of providing and fixing of 2 Nos. of chemical earthing and connecting it to the conical cover of SS ventilator with two separate GI strips of 50mmX3mm
p) CI/DI puddle collar shall be fixed in the bottom/slab for connecting inlet, outlet, overflow and washout pipe of the reservoir.
q) Painting the name of the scheme and other details on the reservoir, and any other work related to structure as per the directions of Engineer-in- Charge, Technical Specification and Scope of Work.
r) Inlet, outlet, overflow, washout pipes and valves are not included in this work, provision for the same shall be taken separately.
-
-
-
... More
Rates for RCC OHSR,SBC 10 T/sqm, SEISMIC ZONE-II & STAGING 18 M
-
-
-
... More
75 KL, staging Height 18 m (8-Nos.)
600000
29
17445480
... More
Construction and commissioning of RCC INTZE type Over Head Service Reservoir of following capacity and staging as per the Scope of work and Technical specifications, consisting of the following main activities: -
-
-
-
... More
a) Topographic survey, preparation of site contour plan, conducting SBC test and its approval from department before construction. Submission and approval of concrete mix design and water quality test report for water to be used in construction. b) Excavation in all types of soil, PCC below foundation, all RCC Work, Plinth protection all around the structure including all material, labour, shuttering, scaffolding etc.
c) OHSR shall be provided with adequate plinth protection all around the structure in a width starting from edge of structure at GL and extending at least up to 1.0m beyond the edge of outer most projection of OHSR. The plinth protection shall consist of 150mm thick PCC in M-15 grade concrete laid over 150mm thick layer of compacted soil. d) Providing and applying two coats of food grade epoxy paint on the inside surface on the top dome, edge beam and 600 mm height of the vertical wall.
e) Conducting successfully hydro test and water tightness test as per I.S. code.
f) Providing and applying three coats of anti-carbonation paint on the top surface of the Top Dome.
g) Providing and applying three coats of cement-based paint on the external surface of the container, balcony, cone wall, columns & beams etc..
h) Providing and fixing SS-304 ventilator, SS 304 manhole frame and cover and SS-304 ladder from top dome/Slab to bottom dome/Slab inside container. i) Providing and fixing of MS section ladder from the last landing to balcony having railing all around it and MS ladder with safety cage from balcony to top dome/slab.
j) Providing and fixing water level indicator (float type).
-
-
-
... More
k) Providing and fixing of hand railing all around the balcony, top dome and staircase consisting of 25mm diameter Class-B GI pipe in two rows and 1000 mm high, 50X50X6mm angle iron vertical post at a maximum spacing of 1500mm centres.
l) All MS parts to be painted with two coats of the enamel paint over the primer coat of red oxide.
m) Providing and fixing of 150mm wide PVC water bar for the construction joints in the container (vertical wall & cone wall).
n) Providing one Aluminium portable ladder of appropriate length to access first landing (3.5 to 4.5m above GL) from ground.
o) Lighting arrestor consisting of providing and fixing of 2 Nos. of chemical earthing and connecting it to the conical cover of SS ventilator with two separate GI strips of 50mmX3mm.
p) CI/DI puddle collar shall be fixed in the bottom dome/ slab for connecting inlet, outlet, overflow and washout pipe of the reservoir.
q) Painting the name of the scheme and other details on the reservoir, and any other work related to structure as per the directions of Engineer-in- Charge, Technical Specification and Scope of Work.
r) Inlet, outlet, overflow, washout pipes and valves are not included in this work, provision for the same shall be taken separately.
-
-
-
... More
Rates for RCC OHSR,SBC 10 T/sqm, SEISMIC ZONE-II 18 M Staging
-
-
-
... More
100 KL, staging Height 18 m
900000
25
22662000
... More
Rates for RCC OHSR,SBC 10 T/sqm, SEISMIC ZONE-II 20 M Staging
-
-
-
... More
100 KL, staging Height 20 m
1400000
27
38374000
... More
150 KL, staging Height 20 m
2700000
20
55917000
... More
200 KL, staging Height 20 m
1000000
18
18240000
... More
250 KL, staging Height 20 m
500000
17
8680000
... More
Rates for RCC OHSR,SBC 10 T/sqm, SEISMIC ZONE-II & STAGING 24 M
-
-
-
... More
250 KL, staging Height 24 m
250000
18
4721600
... More
Providing and fixing of flanged/ plain ended MS special of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depth in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge.
-
-
-
... More
MS pipe specials up to 600mm dia (with minimum 5mm thickness sheet)
52140.45
122
6361135.32
... More
MS pipe specials above 600mm dia(with minimum 6.3mm thickness sheet)
3000
129
387000
... More
Construction of boundary wall of Brick/ stone masonary as per enclosed GA drawing, scope of work and technical specifications complete work in all respect. Brief details of boundary wall parameter is as below:
1. Depth of foundation- 900 mm.
2. PCC in M-10, width -900 mm and thickness 100 mm,
3. Stone masonary in CM: 1:6 section of foundation above PCC, 600 mm (W )x 450 mm (D) and 450 mm (W) x 450 mm (D) 4. Superstructure work: Stone masonary in CM: 1:6, W-300, height-1650 mm,/ Brick work in CM: 1:6 W-230 mm, height- 1650 mm.
5. Cement mortar pointing on Stone masonary and cement mortar plaster 20 mm thick on brick masonary in CM 1:6.
6. Expansion joint shall be on every 30 mtr.
7. On top of wall there shall be CC Coping 75 mm thick (1:2:4) shall be provided.
8. Pillar for main gate 350x350 mm in size is part of boundary wall.
9. Cement paint of approved colour in 3 coat shall be done.
7360
5017
36925120
... More
Providing and fixing steel, gate, grating and grills made of angles, tees, square bars, flats or black pipe with hold fast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide and two coat of enamal paints.
20800
104
2163200
... More
Horticulture inside the OHSR compound
8700
125
1087526.1
... More
Provision for storage of Sodium Hypochlorite solution (2000 Liter)
32000
4
144000
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge.
(External work).
25 mm
320
190
60800
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
20 mm nominal bore
32
284
9088
... More
Providing, Installation , testing and commissioning of Diaphragm type Dosing Pump for dosing liquid products
16
105444
1687104
... More
Platform for Tanks
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils
28.16
152
4280.32
... More
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to Plinth level. M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).
18.24
3700
67488
... More
Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.
M20 grade Nominal Mix
27.52
4480
123289.6
... More
Providing and Fabricating Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code
1728.26
70
120977.92
... More
Centering and Shuttering with Plywood or Steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc.
60.16
123
7399.68
... More
Walls (any thickness) including attached pilasters, buttresses plinth and string course.
320.96
235
75425.6
... More
TRANSFORMERS
-
-
-
... More
Supply, Installation, Testing and commissioning of copper wound ISI marked Transformer 11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories like, conservator, Silicagel breather, radiator, fins, HT & LT cable end boxes or Bus Duct flange, Lifting lugs, Bi-directional Plain/ Flanged Rollers,Earthing terminal,Air relaese plug.Off load tap changer (+5% to -10% in steps of 2.5%), winding / Top oil temperature rise of 45°C/40°C, ISI marked drain valves, Dial type temperature gauge, first fill oil, Epoxy based paint etc having max. total losses as per energy efficiency level - 2 at basic Insulation level conforming to IS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 BEE star level - I as per Govt. of India, Ministry of power notification Dated 16th Dec., 2016. Transformers described as above and as per the following continuous rating
-
-
-
... More
63KVA
2
258501
517002
... More
100KVA
2
301585
603170
... More
160KVA
12
402113
4825356
... More
200KVA
6
488280
2929680
... More
250KVA
6
552906
3317436
... More
315KVA
2
646253
1292506
... More
400KVA
2
804227
1608454
... More
Supply, Installation, Testing and Commissioning of floor Mounted Indoor Type IC-OG 11 KV, 630A, 21 KA for 1 Sec. 11KV HT VCB Panel with AL. Bus bar. Comprising of 11KV FIXED TYPE VCB, 630A, 21 KA 1 sec. with associated Protection duly fabricated with 2.0/2.5/3.0 mm CRCA Sheet, Powder coated, Colour RAL 7032/35/AR complete with hardware and instruments duly wired & tested with stand structure. Protection Class: IP4X. Incoming cum Outgoing facility (IC-OG). Suitable for Indoor & Outdoor Application (IP 5X).Suitable for 30000 Operation. This Panel having Voltage Presence Indications, Local/Remote switch, MFM with RS 485 communication, BCS, Digital Ammeter & Voltmeter, Phase, Spring Charge, Fault & trip Indications. Panel having Numerical Protection MF relay O/C, S/C & E/F Relay with RS 485 Communication Port & also required Under/Over Voltage & Current relay with anti-Pumping Relay facility in the panel, Master Trip Relay, , Restricted Earth Fault Relay. Also provide the Suitable CT with CL 0.5, 15VA, Resin Cast, Dual Core, 1 Phase & the PT with CL 0.5 100VA/50VA As per Connections, Resin Cast , Fixed Type. Panel having transformers Protection Auxiliary Relays with 2 Elements for WTI, OTI & BZ. Panel having suitable Annunciation Window for visual & Hooter.Panel having Lifting Facility (4 Lifting Hooks). Panel having Stand Structure for easy Installation on floor with required Cable Trench & bottom side Cable Entry & Terminations. For Control Supply One Power Pack with battery backup provided for continuous control supply. Required Protection (MCB, s) & Indication are provided. All Protection Relays shall be PLC & SCADA compatible.
32
400000
12800000
... More
Supply, Installation, testing and commissioning of 11 KV Double Pole structure With Air Break SWITCH having following specifications : (a) DP : Double pole structure made of two nos. 9 meter long PCC poles (400 Kg) & 7 nos. MS Channel each of size 100 mmx50mmx2500mm complete with earthing of the structure as per REC standards in all respect with nuts, springs washers, clamps as required. (b) GO:Off load type gang operated 3-pole vertical flute type switch suitable for 11KV ; 400A ,3 phase, central post rotating double break isolator complete with MS hardware , copper moving & fixed contact ,assembly of 9 Nos pin insulator ,GI pipe of suitable length for operation. c) DO: 3 Nos. Horizontal/Vertical mounted 33KV Horn Gap fuse set / Drop Out fuse set, 33KV barrel fuses mounted on 6 Nos. Post insulators. (c) DO: 3nos Vertical / Horizontal mounted 11kv horn gap fuse set /drop out 11kv barrel fuses mounted on 6no pin insulators (d) LA:3 piece non linear resistor type. lighting arrestor of approved make suitable for 3 wire, 11kv oh linewith rated voltage of 9kv rms & nominal discharge current rating of 5 ka & complete with galvanized clamping arrangement GI bolts, nuts, washer etc as required. (e) JUMPERS: 3 no 11kv acsr conductors mounted on pin type insularors as required. GENERAL:The go shall be operated by hand operated liver properly earthed with provision for locking mounted at 3’
32
54840
1754880
... More
Supply, Installation, Testing & Commissioning of HT metering cubical panel as approved By DISCOMs fabricated out of 14 SWG CRCA sheet steel in two compartment & MS angle of size 60mmX6mm having provision for Following: (i) Provision for fixing Trivector Meter (To be supplied by DISCOMs) (ii) Provision for fixing of combined CT PT Set (To be supplied by DISCOMs) (iii)TT Block (iv) 6mm Bakelite sheet on all sides.
16
25711
411376
... More
SITC of battery bank of min 150 AH capacity comprising SMF/VRLA batteries , MS / Teakwood battery stand , interconnect wiring etc as required complete in all respect of rating:
-
-
-
... More
110VDC
16
218208
3491328
... More
SITC of FCBC ( Float cum boost charger)suitable for 415V +/-10%, 50 Hz , 1-ǿ / 3 -ǿ Input & 24/ 48 /110 V DC OutputNatural Cooled, free standing in Sheet Steel enclosure,SCR controlled , regulation +/-1% , Efficiency 75% on FLAC/ DC Instruments, Selector Switch ,Built in DC Distribution Board (6 No MCB), indication , control as required of following rating:
-
-
-
... More
25 A + 25 A
16
90993
1455888
... More
Plate Earthing as per IS:3043 with copper Earth plate of size 600mm x 600mm x 3.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer, nipple ,wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required
256
5500
1408000
... More
Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required.
128
3000
384000
... More
S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.
-
-
-
... More
50mm x 6mm copper strip
800
1966
1572800
... More
50mm x 6mm G.I. ( Hot Dipped ) Strip
1500
185
277500
... More
32mm x6mm G.I. ( Hot Dipped ) Strip
800
117
93600
... More
25mm x 3mm G.I. ( Hot Dipped ) Strip
800
49
39200
... More
Providing & Laying XLPE insulated IS:7098/II/85 of approved make H.T.cable for working voltage 11 K.V.Un-Earthed with Stranded Compacted Circular Aluminium Conductor, Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated, Insulation Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanised flat steel strip armoured and overall Extruded PVC Type ST-2 Outer Sheathed cable direct in ground including excavation of 30cmx100cm size trench, 25cm layer of river sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection testing etc.as required of size.
-
-
-
... More
3 core 120.0 Sq.mm
2600
1139
2961400
... More
Providing & making heat shrinkable type indoor/outdoor/straight through terminations/joint kit of approved make suitable for XLPE insulated 11 KV cable, with required components, prepration of cable ends,testing etc. as required of following sizes .
-
-
-
... More
3 core 120/150/185 Sq.mm
128
5429
694912
... More
3 core 120/150/185/225 Sq.mm
64
7504
480256
... More
Supplying and drawing PVC insulated & sheathed solid/ stranded copper conductor multi core control cable ISI marked (IS:1554) of 1.1 kV grade of approved make in existing surface or recessed conduit/ casing capping including making connections etc. as required.
-
-
-
... More
1.5 sq. mm. armoured , 4 core
3200
74
236800
... More
2.5 sq. mm. armoured , 2 core
3200
70
224000
... More
Providing and laying XLPE/PVC insulated & PVC sheathed armoured control cables of 1.1 KV grade with copper conductor as per IS 1255 including excavation of 30 CmX75 Cm size trench 25 Cm thick under layer of sand and second class bricks covering, backfilling & compaction
-
-
-
... More
3C x 2.5 sq.mm
3200
176
563200
... More
4C x 2.5 sq.mm
3200
202
646400
... More
8C x 2.5 sq.mm
3200
329
1052800
... More
8C x 1.5 sq.mm
3200
222
710400
... More
Providing & Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection,Complete as per technical specifications and as directed by Engineer in charge.
-
-
-
... More
300 SQMM x 3.5 CORE
400
1006
402400
... More
185 SQMM, 3.5 CORE
1200
841
1009200
... More
120 SQMM, 3.5 CORE
1400
602
842800
... More
70 SQMM, 3.5 CORE
400
401
160400
... More
70 SQMM, 3 CORE
1700
355
603500
... More
50 SQMM, 3 CORE
150
284
42600
... More
35 SQMM, 3 CORE
1700
242
411400
... More
25 SQMM, 3 CORE
2400
207
496800
... More
16 SQMM x 3 CORE
800
168
134400
... More
10 SQMM, 3 CORE
1000
161
161000
... More
4.0 SQMM x 3 CORE
11600
131
1519600
... More
Supply, Fabricating & installing following sizes of ladder type cable trays with rungs at span of 250 mm including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/wall with suspenders and including painting as required.
-
-
-
... More
Hot Dipped Galvanized
-
-
-
... More
150mm x 50mm x 1.6mm
800
286
228800
... More
300mm x 50mm x 1.6mm
800
333
266400
... More
Supply, Fabricating & installing following sizes of perforated cable trays including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling with suspenders and including painting as required.
-
-
-
... More
Hot Dipped Galvanized
-
-
-
... More
100mm x 50mm x 1.6mm
800
265
212000
... More
150mm x 50mm x 1.6mm
800
333
266400
... More
300mm x 50mm x 1.6mm
800
518
414400
... More
SF of rubber matting with one side corrugated as per IS specifications 15652/2006
-
-
-
... More
11 KV, 25 mm thick,
160
3618
578880
... More
415 V LT Panel SITC of floor mounted PMCC (Indoor, Dust proff IP-4X front operated with 2 mm thick sheet metal compartmentalised) with all accessible parts, head shrinkable sleeves, SMC/DMC bus bar supports, padlocking facility on outgoing feeders etc.
-
-
-
... More
Incommer feeder (drowout type )for transformer 630A/800A, 50KA, ACB 3 pole, Al Bus Bars,Digital Multifunction meter compatable to SCADA,metering,Protection CT's, IDMT 3-O/C & 1-E/F, indicating lamps, control fuse, wiring etc.complete in all respect of the size appxo 900(D)X.2400(H)X1000(D)
4
254057
1016228
... More
Bus Coupler Feeder (drowout type ), 630/800 A ACB, 50KA, 3 Pole without release with Al Bus Bars, Indicating Lamps, Control Fuses and wiring etc. complete in all respect. Size : 900(W) x 2400 (H) x 1000 (D)
2
218208
436416
... More
400 A MCCB Incomer (Fixed type ) with metering CTs, multi fuction meter compatible to scada, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect. Size:900(W)X600(H)X1000(D)
18
60007
1080126
... More
250 A MCCB Incomer (Fixed type ) with metering CTs, multi fuction meter compatible to scada, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect. Size:900(W)X600(H)X1000(D)
24
52993
1271832
... More
MCCB up to 100A (Fixed type ) as outgoing CT's, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect.Size: 600(W)300(H)X1000(D)
96
33511
3217056
... More
MCCB up to 100A (Fixed type ) as outgoing CT's, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect.Size: 600(W)300(H)X1000(D)
32
33511
1072352
... More
MCCB up to 100A (Fixed type ) as outgoing CT's, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect.Size: 600(W)300(H)X1000(D)
16
33511
536176
... More
MCCB up to 100A (Fixed type ) as outgoing CT's, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect.Size: 600(W)300(H)X1000(D)
16
33511
536176
... More
400 A MCCB (Fixed type ) as outgoing CT's, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect.Size: 900(W)X900(H)X1000(D)
2
42609
85218
... More
250 A MCCB (Fixed type ) as outgoing CT's, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect.Size: 900(W)600(H)X1000(D)
9
43642
392778
... More
MCCB up to 100A (Fixed type ) as outgoing CT's, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect.Size: 600(W)300(H)X1000(D)
5
33511
167555
... More
SITC of Soft Starters with panel supplied by manufacturer conforming to applicable standards with logic inputs & outputs, relay outputs and analogue outputs, plug in I/O connections, display of electrical parameters, state of load & operating time, RS 485 serial link for connections to Modbus.
-
-
-
... More
55KW
22
132812
2921864
... More
45KW
2
112221
224442
... More
37KW
2
100643
201286
... More
30KW
20
91912
1838240
... More
22KW
12
82567
990804
... More
S & F of Star delta Starter with MCB,Main and Aux Contactor,O/L Relay, L/R Selector Switch,3 Indicating lamps,Start-Stop Push Button ,Control MCB with panel with all accessories with following rating
-
-
-
... More
11KW
4
10211
40844
... More
15KW
4
11417
45668
... More
18.5KW
20
11417
228340
... More
From 3.3 KW to 7.5 KW DOL Starter Feeder with MCB,Main and Aux Contactor,O/L Relay,L/R Selector Switch,3 Indicating lamps,Start-Stop Push Button ,Control MCB (Size : 600 (W) x 400 (H) x 600 (D)
10
20262
202620
... More
433V APFC Panel in cubicle made of CRCA sheet steel of minimum 2.5/2.0/1.6 mm thickness, comply with latest IS/ IEC, totally enclosed Operational on 3 Phase 415 voltages, 50Hz, neutrally grounded, IP 4X, The cubicle panel shall be vermin proof and dust-tight and shall be of compartmentalized type construction, nine tank pre-treatment process before powder coating, Paint Shade – Grey RAL 7032, gasket material- neoprene, AC/DC/CT wiring – 1.5/2.5sqmm PVC insulated multi strand Copper flexible wire, Heat shrinkable Colour coded PVC bus bar sleeves, cable entry Incoming – bottom and outgoing – Bottom as per requirement. The switchgears and control gears complete with all necessary supporting framework, nuts and bolts, Aluminum Bus Bar. The Indoor APFC Panel switchesgear (Air circuit breakers, MCCB, CTs, etc) and control gear (Microprocessor based APFC 8/12 Stage relays, APFC Duty Contactors, auxiliary contacts, Space heater and lighting, Digital A & V meters with Selector Switch, Phase Indications, Hooter, plug socket etc.) shall be mounted on the same panel Complete as per technical specifications and as directed by Engineer in charge.
1400
2200
3080000
... More
SITC of Local Push Button station fabricated with 16 SWG CRCA sheet, painted with polyster Powder coated finish after chemical treatment with Folliwng items and accessories:- i Shrouded Type push button with 2 NO Contacts element for Start/forward-reverse. ii Lockable Mushroom head type push buuton with 2 NC Contact element. iii 2.5 Sqmm clipon type terminals as requried with 20% spares. iv 1.5 Sqmm PVC insulated felxible copper wire with lugs & ferrules as requried.
-
-
-
... More
Local Push Button Station
96
2026
194496
... More
Supply and erection of Octagonal pole of following length and dimension as per table-3 with base plate on the cement concrete foundation of M-15 /M-20 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS 1367 P III ). The pole shall be made of S-355JO grade steel sheet , folded lengthwise to obtained Octagonal shape, having single longitudinal seam weld and hot dipped galvanised internally & externally in accordance with IS 2629. The pole shall have a weatherproof flush door and locking arrangements. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning.
-
-
-
... More
7 Mtr.
124
15962
1979288
... More
Supply, Erection and Fixing of hot dipped galvanised Overhang (60 X 3.25 mm) with cap (250 x 137.9 x 4.05 mm) over the poles
-
-
-
... More
Single arm overhang
124
1382
171368
... More
P/ F IP-65/ IP-66 protected street light luminaries on bracket / Arm. Fixture made from powder coated single piece pressure die cast aluminum housing with heat dissipation fins on housing with high power LEDs . Diffuser / glass cover for ensuring IP-65 protection for lamp and control gear compartment, system lumen output of 100 lum/watt high power LED. Integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to IEC standards. System life of 50000 burning hours with 70 % of initial lumens maintained. Fixture shall be in CE compliance. IP-65 protected LED street light luminaries
-
-
-
... More
LED street light fixture 80-90 watt
124
8313
1030812
... More
P & F IP -65 protected integral flood light luminaire suitable for HPSV/ Metal halide lamp comprising of powder coated die cast aluminium housing, electrochemically brightened and anodized stippled aluminium reflector, covered with suitably gasketed heat resistant and toughened glass, porcelain holder, integral control gear box having copper ballast, capacitor, electronic ignitor prewired with pvc insulated copper conductor up to terminal block including making connection testing etc.
-
-
-
... More
1 X 250 Watt
60
5313
318780
... More
P & F High pressure sodium vapour/ High pressure mercury vapour/ Metal halide/ Halogen lamp as required. HPSV tubular lamp normal output.
-
-
-
... More
250 Watt
60
261
15660
... More
Providing and fixing in position lightening arrester set complete with 600mm x 600mm x 6mm thick G.I. earthing plate embedded below ground in earthling pit at 3.5 metre depth, G.I. strip of size 25mmx5mm thick from earthing plate to top of Over head tank, G.I. Finial made of GI bar 25mm dia and 2m long fixed on top of Building and connected to GI strip. The earthling set shall comply of IS:3043 complete in all respect as per specification and the direction of the Engineer.
32
12500
400000
... More
From 3.3 KW to 7.5 KW DOL Starter Feeder with MCB,Main and Aux Contactor,O/L Relay,L/R Selector Switch,3 Indicating lamps,Start-Stop Push Button ,Control MCB (Size : 600 (W) x 400 (H) x 600 (D)
16
20262
324192
... More
Heavy Duty suitable size of AL & CU Lugs, suitable size of Double Compression Cable Gland with Nickel Plated, Cable Tie, Cable Tags, GI Nut- Bolts-Washers, PG Glands, Anchor Fasteners, Control MCB, Anchor Bolts, Clamps, Clips, Screw, Electrical Taps, HT Tap, Danger Plates, First Aid box complete with all standard medical, 4.5 Kg. CO2 type portable fire extinguisher, Fire buckets with floor / wall mounting stand, 11KV & 33KV Hand Gloves ect. Required hardware & accessories for Each Pump House.
16
75000
1200000
... More
11 KV Switchyard Civil work for Transformers Foundations, DP Structure, Chain Link Fencying 1500mm Height, MS Gate , 40mm Gravels, boundary wall, Earthing Chambers, HT/LT cable Trench, Pre-cast covers ect.
16
400000
6400000
... More
Design, manufacture, supply, installation, testing and commissioning of indoor type PLC panel of size approx. 1100 mm X 700 mm X 2100mm (LBH) , fabricated out of min. 2 mm thick CRCA sheet complete with latest configuration , necessary programming for SCADA software and comprising of all accessories not limited to the following: DI –92 num DO – 92 num AI –16 num AO – 8 num MCB 10A DP – 1 num MCB4ADP – 2 num MCBSP2A – 8 num MCB 1A DP – 15 num 24 VDC Power Supply 10A – 1 num Push Buttons – 30 num Selector Switch - 15 num Control Relays – 200 num Annunciator with 24 Windows NO to NC Type Microprocessor Based, Window Size 75*42mm, 110VAC, with Electronic Hooter – 1 num Control Transformer – 1 num Emergency PB – 1 num Panel Cooling Fan – 1 num Panel Light with Door Switch – 1 num Control Indication Lamp – 30 num Wiring + TB etc – 1 lot Hardware – 1 lot
5
1552591
7762955
... More
Design, manufacture, supply, installation, testing and commissioning of indoor type PLC panel of size approx. 1100 mm X 700 mm X 2100mm (LBH) , fabricated out of min. 2 mm thick CRCA sheet complete with latest configuration , necessary programming for SCADA software and comprising of all accessories not limited to the following: DI – 60 num DO – 60 num AI – 8 num AO – 4 num MCB 10A DP – 1 num MCB4ADP – 2 num MCBSP2A – 8 num MCB 1A DP – 15 num 24 VDC Power Supply 10A – 1 num Push Buttons – 20 num Selector Switch – 10 num Control Relays – 200 num Annunciator with 24 Windows NO to NC Type Microprocessor Based, Window Size 75*42mm, 110VAC, with Electronic Hooter – 1 num Control Transformer - 1 num Emergency PB – 1 num Panel Cooling Fan – 1 num Panel Light with Door Switch – 1 num Control Indication Lamp – 20 num Wiring + TB etc – 1 lot Hardware – 1 lot
11
1252882
13781702
... More
HIM Display, Colour, 12" having Ethernet Port, USB Port ect.
16
165000
2640000
... More
Operator & Engg. Station PC includes, Core i5 processor, 8 GB DDR RAM, 1TB SSD, DVD RW Drive, RS-232/485 Ports, 1 Parallel Port, 4 nos. USB Port, 2x Ethernet Cards, Keyboard, optical mouse, 32'' LED monitor, Latest Original window, MS Office, Anti Virus ect. Make - HP/DELL/ LENOVA
16
135000
2160000
... More
Quad-band GPRS/ VPN modem with Ethernet bridge/ router/ serial server (RS232/485) interface. Suitable for 4G LTE (Cat 4), 3G Network, Multiple clients and a server can run simultaneously
16
65000
1040000
... More
Providing, installation, testing and commissioning of UPS, 1 Phase 415 V, 50 Hz with 60 min back up Ni+Cd battery bank.
-
-
-
... More
1 KVA
16
235837
3773392
... More
Providing and laying Stranded/ Flexible Annealed Bare copper conductor ,XLPE/PVC insulated suitably laid up together overall polyester taped Al (inner sheeted GI Steel wire Mylar/Drain wire) along with ATC drain wire , round/steel Armoured overall PVC sheathed (ST-1) overall screened Core Armoured instrumentation Cables generally confirming to PAS 5308- Part-2-2009.
-
-
-
... More
1 SQMM, 12 Core
1600
207
331200
... More
1 SQMM, 24 Core
2500
334
835000
... More
Providing and laying Stranded/ Flexible Annealed Bare copper conductor ,XLPE/PVC insulated suitably laid up together overall polyester taped Al (Mylar tape wrapped) along with ATC Drain wire overall PVC sheathed (ST-1) overall screened Pair Armoured instrumentation Cables generally confirming to PAS 5308- Part-2-2009.
-
-
-
... More
1 SQMM, 2 Pair
10000
128
1280000
... More
Providing and laying XLPE/PVC insulated & PVC sheathed Armoured control cables of 1.1 KV grade with copper conductor as per IS 1255 including excavation of 30 CmX75 Cm size trench 25 Cm thick under layer of sand and second class bricks covering, backfilling & compaction.
-
-
-
... More
4C x 2.5 sq.mm
5000
202
1010000
... More
4C x 1.5 sq.mm
5000
152
760000
... More
Providing, Installation, Testing and Commissioning of ULTRASONIC LEVEL TRANSMITTER for Water Application : Principle : Time of Flight / Sensor MOC PP / Process Connection 1 1/2 inch BSP or 2 inch BSP Threaded type / Power Supply: 24 V DC / Output: 4- 20mA / Display: Integral display for programming and Display Reading / IP 66
-
-
-
... More
0-5M
74
62890
4653860
... More
Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range: 0-10 Bar / Power Supply: 24 V DC / Output: 4-20 mA with HART / Diaphragm: SS316L / Process Connection: 1/2 "NPT (M) / Accuracy: 0.15% Protection: IP67
-
-
-
... More
1/2" M (NPT)
96
70751
6792096
... More
Providing, installation, testing and commissioning of Diaphragm Type Pressure Gauges Dial size 150 mm glycerin filled shatterproof glass, Over range protection: 125% of maximum pressure, Material of sensor and other wetted parts: SS type 316, Housing material: Die cast aluminum
48
7075
339600
... More
Providing, installation, testing and commissioning of Diaphragm type Pressure Switches Sensing Element: Bellows / Diaphragm, Material of sensor and other wetted parts: SS type 316, Housing: Die cast aluminum, Switch type: Microswitch, Repeatability: ± 1% of span, Switch Contacts: 2 NO + 2 NC
48
6603
316944
... More
Providing, installation, testing and commissioning of Level Switch ( Conductivity) Conductivity Probes: (i) Rigid for lengths of up to 3 meters (ii) Flexible for lengths above 3 meters (Rigid probes preferred), Probe insulation: Teflon, Probe head protection class: IP 65 of IS 13947 Part I, Probe head housing material: Aluminum
16
31445
503120
... More
Modular RTU complete with DI, DO, AI and modbus communication ports and power supply 12/24 VDC or for variable power supply using batteries, rechargeable batteries, solar or 10.8 V DC to 28.8 V DC with integrated modem; connection to control center via Communication protocols, on-board I/Os min. (4 DI, 2 DQ, 2 AI), configuration and diagnostics per web interface, RJ45 port, mobile communications antenna (GSM/UMTS), Mini SIM card, with adapter Micro SIM card also, GPRS (Multi-slot Class), 35 mm DIN rail mounting, TCP/IP, Open VPN-Client. Panel Enclosure for Modular RTU Location, wall/floor mounted along with wiring and related accessories and arrangement of mounting of RTU, Modem having IP-5X Protection. Panels shall be self-fabricate type only with Canopy.
58
65000
3770000
... More
Programming and Troubleshooting software for RTUs
3
50000
150000
... More
Supply, installation, testing and commissioning of MNRE approved off Grid Solar Panels with 25 years of Linear Generation warranty, Work includes designing of solar panel area and MS fabricated structure 120 micron hot dip galvanized iron , showing arrangement of panel in available space and installation of PV module of minimum 15W-20W on frame structure. The Frame Structure needs to be mounted on top of Water Tank such that minimum height of lower edge of panel shall be 0.5 Mtr from top of Water Tank to safeguard against damage and theft as per indicative drawing enclosed with the bid document. The foundation of structure shall be bolted. Mounting structure shall be suitably designed to withstand wind velocity up to 150km/hr. The system should include a 12V Battery Charger with over charging protection, surge protection & auto cutoff facility including a 12V Battery of minimum 7-10AH capacity. The work shall be executed as per detailed technical specifications, approved drawing and direction of Engineer in Charge. Note: There shall be 5 year service warranty for solar panel and mounting structure and suitable provision shall be included in tender document.
58
12000
696000
... More
Supply, installation, testing and commissioning of GSM /GPRS/ Cloud based data transmitter for Bulk Flowmeter (woltman Magnetic Pulse Output only ), Battery Powered -3VDC to12VDC , Model no- CT-DL-V1.0-100784, battery life 3-5 Years, Inbuild Memory fuction upto 2gb micro SD card supported to stroe the data in the absense of availabe mobile network, (1 no Data transmit in a day on cloud system), Encloser- ABS Protection-IP67/68, Operating tempreature -50-55 Deg. C. The VTC Inlet Flow Data shall be transmitt to the Respective MCC ROOM.
179
32500
5817500
... More
Local Data Logger - PC based Data Acquisition System with SAM WI License Software suitable for Storing, Logging, Reporting, Printing data from above offered Analysers. PC with specifications as under: Pentium Dual Core 2 Processor, 2 GB RAM, 250 GB HDD, CD/DVD Combo Drive, 19" TFT Monitor, 2serial & 1 parallel ports, Standard WINDOWS, Operating System, standard keyboard, mouse with pad and Color Laser printer.
1
377339
377339
... More
Central Data Logger - PC based Data Acquisition System with XR Premium License Software suitablefor Storing, Logging, Reporting, Printing data, Validation and communicating with above offeredLocal DAS. PC with specifications as under: Pentium Dual Core 2 Processor, 2 GB RAM, 250GBHDD, CD/DVD Combo Drive, 19" TFT Monitor, 2serial & 1 parallel ports, Standard WINDOWSOperating System, standard keyboard, mouse with pad and Color Laser printer.
1
590000
590000
... More
UPS, Capacity 5 KVA, 230 VAC, 50 Hz. with 1 hr battery backup for all the Analysers only
1
366136
366136
... More
SITC of 55'' Flat Screen HD LED TV with remote control and wall mount unit / floor standcomplete with making connections etc. as required Sony/ Samsung/Panasonic)
1
200000
200000
... More
Cost for basic service charges, Administration and Management, running of office, staff quarters, comprehensive Operation, Maintenance and Repairs including Preventive Maintenance, IEC activities as per scope of work, cost of material required for maintenance & repairs, cost of lubricants, saltf for producing chorine, consumables spare parts (if the spare parts supplied to PHED are used in emergency) as per scope of work & items & conditions of contract no, amt will be paid for O&M in DLP
-
-
-
... More
For the 1st year of O&M after DLP
1
9568877
9568877
... More
For the 2nd year of O&M after DLP
1
10047318
10047318
... More
For the 3rd year of O&M after DLP
1
10549684
10549684
... More
For the 4th year of O&M after DLP
1
11077171
11077171
... More
For the 5th year of O&M after DLP
1
11631024
11631024
... More
For the 6th year of O&M after DLP
1
12212566
12212566
... More
For the 7th year of O&M after DLP
1
12823215
12823215
... More
For the 8th year of O&M after DLP
1
13464368
13464368
... More
For the 9th year of O&M after DLP
1
14137571
14137571
... More
For the 10th year of O&M after DLP
1
14844467
14844467
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%