Public Health Engineering Department Tender

If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.

Public Health Engineering Department - PHED Tender

Works

Civil And Construction

Construction Material

Machinery and Tools

Pipe Line Project

Eprocure

Salumber, Rajasthan

Opening Date7 Mar 2024

Closing Date13 Mar 2024

Tender Amount₹ 1,00,00,000

Notes

Download

Costs

EMD
₹ 2,00,000
Document Cost
₹ 5,000
Tender Fee
₹ 1,500

Description

Unlock the Tender details for free

Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Tender Id
2024_PHCJA_387340_1
Bid Award Id
View
Tender No
NIT NO 113/2023-24
Tender Authority
Public Health Engineering Department View
Purchaser Address
-
Website
http://https://phedwater.rajasthan.gov.in/phed

Unlock the Tender details for free

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

Request Call Back

Documents

Download All

Tender Notice-1391.9 kBTendernotice_1.pdf

Tender Notice

BOQ-1984.6 kBBOQ_690185.xls

Financial Bid BOQ

Document-2481.7 kB113.pdf

Technical Bid

Document-153.1 kBTender_Detail_2024...Tender_Detail_2024_PHCJA_387340_1.html

Report Missing Document

BOQ Items

DO_NOT_SHOW

Quantity-

Rate-

Amount -

View all details for FREE

150 mm

Quantity-

Rate2082

Amount 2082

200 mm

Quantity-

Rate2554

Amount 2554

Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-9 grade S&S pipes as per IS:8329-2000 (amended up to date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.

Quantity-

Rate-

Amount -

100 mm

Quantity-

Rate1670

Amount 1670

150 mm

Quantity-

Rate2384

Amount 2384

200 mm

Quantity-

Rate3037

Amount 3037

Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended up to date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) . Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply may be in coil or straight length in 6 M/12 M.

Quantity-

Rate-

Amount -

HDPE PE-80 PN-6

Quantity-

Rate-

Amount -

63 mm dia

Quantity-

Rate171

Amount 171

75 mm dia

Quantity-

Rate217

Amount 217

90 mm dia

Quantity-

Rate306

Amount 306

110 mm dia

Quantity-

Rate463

Amount 463

HDPE PE-100 PN-6

Quantity-

Rate-

Amount -

63 mm dia

Quantity-

Rate145

Amount 145

75 mm dia

Quantity-

Rate186

Amount 186

90 mm dia

Quantity-

Rate264

Amount 264

110 mm dia

Quantity-

Rate442

Amount 442

HDPE PE-80 PN-10

Quantity-

Rate-

Amount -

90 mm dia

Quantity-

Rate449

Amount 449

110 mm dia

Quantity-

Rate675

Amount 675

HDPE PE-100 PN-10

Quantity-

Rate-

Amount -

90 mm dia

Quantity-

Rate391

Amount 391

110 mm dia

Quantity-

Rate582

Amount 582

De-jointing and removing of already laid CI/DI pipes of following diameters in excavated trenches with care, without damaging pipes, CID joints, valves, specials etc. and other materials and then refilling of soil after de-laying and de-jointing of pipelines with proper compaction and disposing of all surplus soil as directed with in a lead of 30 mtr. This also include stacking the pipes with care and transporting the same to div./sub div. store or as directed by EIC with in the division. (Rates are Exclusive of Earth Work)

Quantity-

Rate-

Amount -

80 mm

Quantity-

Rate45

Amount 45

100 mm

Quantity-

Rate50

Amount 50

125 mm

Quantity-

Rate50

Amount 50

150 mm

Quantity-

Rate59

Amount 59

200 mm

Quantity-

Rate79

Amount 79

Laying, Jointing, Testing and Commissioning of Ductile Iron (DI) Pipes of any class in assorted length with specials, valves etc. including local handling and transportation from PHED store and then refilling of soil with proper compaction and disposing of all surplus soil as directed with in a lead of 30 mtr as per satisfaction of EIC. (Rates are Exclusive of Earth Work and jointing materials)

Quantity-

Rate-

Amount -

80 mm

Quantity-

Rate48

Amount 48

100 mm

Quantity-

Rate50

Amount 50

125 mm

Quantity-

Rate52

Amount 52

150 mm

Quantity-

Rate64

Amount 64

200 mm

Quantity-

Rate80

Amount 80

Providing Household Tap Connection as per technical specification and approved drawing as per relevant IS code (amended up to date) from uPVC/DI/AC/MS/GI pipe line up to consumer meter/premises by using PP/MS saddle piece (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil (excluding road); depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including MS/PP saddle piece, gunmetal ferrule 4.0 mm , GM Full-way Valve (IS:778 Mark) or ball valve (min. weight 165 gm) and specials, below ground level 20 mm nominal dia MDPE pipe PE 80 PN 16 as per ISO 4427 / 20 mm nominal dia PPR-C (Three layered) pipe PN16 SDR 7.4 (IS:15801:2008) (ISI mark) and above ground level using 20 mm dia PPR-C pipe with standard PPR fittings/ 15 mm dia GI pipe with fittings in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . The service line should be laid at least 45 cm below ground level. Note: Road cut and restoration is not part of this item and paid separately.

Quantity-

Rate-

Amount -

For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr.

Quantity-

Rate1658

Amount 1658

Providing Household Tap Connection as per technical specification and approved drawing and as per relevant IS code (amended up to date) from HDPE pipe line up to consumer meter/premises by using electro fusion saddle piece (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including electrofusion saddle piece, gunmetal ferrule 4.0 mm , GM Full-way Valve (IS:778 Mark) or wheel valve and specials, below ground level 20 mm nominal dia MDPE pipe PE 80 PN 16 as per ISO 4427 / 20 mm nominal dia PPR-C (Three layered) pipe PN16 SDR 7.4 (IS:15801:2008) (ISI mark) for and above ground level using 20 mm dia PPR-C pipe with standard PPR fittings/ 15 mm dia GI pipes with fittings in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . The service line should be laid at least 45 cm below ground level. Note: Road cut and restoration is not part of this item and paid separately.

Quantity-

Rate-

Amount -

For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr.

Quantity-

Rate1986

Amount 1986

Providing Household Tap Connection as per technical specification and approved drawing as per relevant IS code (amended up to date) from HDPE/uPVC/DI/AC/MS/GI pipe line up to consumer meter/premises by using PP mechanical Integrated saddle with inbuilt flow control valve made out of SS316 designed for 5 LPM discharge at 0.5 bar pressure , not exceeding the flow of 7 LPM at 2 bar and a compression elbow, moulded in single piece/ fusion welded (Complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including GM Full-way Valve (IS:778 Mark) or wheel valve and specials with 20 mm nominal dia MDPE pipe PE 80 PN 16 as per ISO 4427 / 20 mm nominal dia PPR-C (Three layered) pipe PN16 SDR 7.4 (IS:15801:2008) (ISI mark) and above ground level using PPR-C pipe with standard PPR fittings/ GI pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . The service line should be laid at least 45 cm below ground level.

Quantity-

Rate-

Amount -

Note: Road cut and restoration is not part of this item and paid separately.

Quantity-

Rate-

Amount -

For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr.

Quantity-

Rate1780

Amount 1780

P & F Bib cock (IS : 781 mark), superior quality of approved make , brass 400 gm, 15 mm nominal bore.

Quantity-

Rate311

Amount 311

P & F Bib cock (IS : 8931 mark), superior quality of approved make, chrome plated with complete brass body including brass handle with wt. 300 to 325 gm.15 mm nominal bore.

Quantity-

Rate311

Amount 311

Road cutting for house hold service connection in minimum trench width wherever road crossing is required. Road cutting of cement concrete,WBM, Black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with Cement concrete with PCC M-10 and CC M-30 grade as per specification and direction of Engineer in charge..

Quantity-

Rate200

Amount 200

Add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm PE 80 PN 16 as per ISO 4427 MDPE pipe including excavation, providing, laying & jointing of service line above 5.00 mtr.

Quantity-

Rate44

Amount 44

Add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm ISI marked PN16 SDR 7.4 (IS:15801:2008) PPR-C (Three layered) pipe including excavation, providing, laying & jointing of service line above 5.00 mtr.

Quantity-

Rate57

Amount 57

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.: All kinds of soil

Quantity-

Rate200

Amount 200

Add extra for trenches for every additional lift over item no 4.1

Quantity-

Rate-

Amount -

Above 1.5 mtr and up to 3.0 mtr.

Quantity-

Rate20

Amount 20

Above 3.0 mtr and up to 4.5 mtr.

Quantity-

Rate39

Amount 39

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and stacking serviceable material for measurements and disposal of unserviceable material as directed, with in a lead of 50 Mtr. including all safety provisions required .:

Quantity-

Rate-

Amount -

Ordinary rock

Quantity-

Rate365

Amount 365

Hard rock (requiring blasting)

Quantity-

Rate546

Amount 546

Hard rock(blasting prohibited)

Quantity-

Rate782

Amount 782

Add extra for trenches for every additional lift over item no 4.3

Quantity-

Rate-

Amount -

Above 1.5 mtr and up to 3.0 mtr.

Quantity-

Rate37

Amount 37

Above 3.0 mtr and up to 4.5 mtr.

Quantity-

Rate73

Amount 73

Dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work.

Quantity-

Rate757

Amount 757

Dismantling of flexible pavement for pipe line and chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work.

Quantity-

Rate-

Amount -

Bituminous courses

Quantity-

Rate416

Amount 416

Granular courses

Quantity-

Rate296

Amount 296

Providing and laying in position cement concrete M10 grade nominal mix 1:3:6 (1 Cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work.

Quantity-

Rate4678

Amount 4678

Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work.

Quantity-

Rate-

Amount -

M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).

Quantity-

Rate6162

Amount 6162

Plain cement concrete pavement of M-30 Grade

Quantity-

Rate6497

Amount 6497

Removing & Re-fixing of Precast concrete interlocking blocks for laying of pipe line by manual method, stacking of serviceable & non serviceable material separately, disposal of dismantled material lead up to 50 mtr. The C.C. interlocking paving blocks be laid on average 25 mm thick bed of coarse sand and the joints to be filled with fine sand. Laying procedure on compacted sub base as defined. Complete job is to be executed as per the directions of Engineer in charge. The rates to be inclusive of fixing of 70 percent reusable precast concrete interlocking block and cost of required new precast concrete interlocking block against damaged, including all lead and lift as per Technical specifications. (Interlocking block manufactured by fully computerized automatic stationery hydraulic vibro pressed machine & full computerized automatic batching plant of class A-1 as per BS:6717-2001. Tensile splitting strength and breaking load as per BS: 6717-2001 Colour: Grey cement natural colour. Variation in Dimension : Less than 1.6 mm Variation in thickness: Less than 3.2 mm) Note: If existing precast block used more than 70%, than for every 1% use above 70%, deduction of 1% in cost shall be done for every 1% use above 70%.

Quantity-

Rate-

Amount -

60 mm thick.

Quantity-

Rate275

Amount 275

80 mm thick.

Quantity-

Rate298

Amount 298

100 mm thick

Quantity-

Rate332

Amount 332

Horizontal directional drilling (by trenchless technology) of suitable dia hole minimum 1.0 mtr below natural ground level in all type of soil under CC/BT roads and pulling HDPE pipes of dia up to 110 mm, which are available in the form of a coil including excavation, shoring/ strutting, preparation, maintain the thrust and including, road dismantling, excavation and refilling of drive pit and exit pit, restoration of road cut as per technical specification and scope of work, but excluding the cost of pipe line.

Quantity-

Rate289

Amount 289

Supply laying and pushing of MS casing pipe of specified thickness approved by concerned department authority by trenchless method adopting any suitable technology below ground at required depth under running traffic condition as per Highway/ Railway standard including carrying out survey work at the job site for determining underground cable trenches like telephone, cable, water & sanitary lines and resistivity test for finding the soil strata using necessary equipments for completion of works, mobilizing of machineries and specialized crew at the job site complete in all respect, including excavation of driven pit and exit pit (up to 3 meter depth) with proper protection at these sites with shoring sheets and ISMB. Providing MS cutting edges for front shield and constructing thrust bed at designated level. Necessary dewatering and providing concrete foundation at the base of the driven pit, PVC/Rubber saddle as per the requirement of Highway/Railway authority, crane for handing of pipe and any other machinery, tools, and tackles required, construction of temporary works as per design, drawing and method as per approved by authority specification and the direction of the Engineer. Apply corrosion, resistant, protection on inside and outside of casing pipe as per technical specification.

Quantity-

Rate-

Amount -

300 mm Dia 8 mm thick casing pipe.

Quantity-

Rate18353

Amount 18353

400 mm Dia 8 mm thick casing pipe .

Quantity-

Rate20972

Amount 20972

500 mm Dia 8 mm thick casing pipe .

Quantity-

Rate23569

Amount 23569

600 mm Dia 10 mm thick casing pipe .

Quantity-

Rate30211

Amount 30211

700 mm Dia 10 mm thick casing pipe .

Quantity-

Rate33457

Amount 33457

Removing & Re-fixing of Bricks Kharanja road by manual means for laying of pipe line, stacking of serviceable & unserviceable material separately, disposal of dismantled material lead up to 50 mtr. The Bricks interlocking be laid on average 12 mm thick bed of mud mortar and the joints to be filled with pointing in cement mortar 1:3. Laying procedure on compacted sub base as defined. Complete job is to be executed as per the direction of Engineer in charge. The rates are inclusive of fixing of 80 percent reusable Bricks and cost of required new First class FPS bricks (min. 10.5 Mpa) in place of damaged bricks, all lead and lift as per Technical Specifications and direction of Engineer in Charge. Note: If existing bricks used more than 80%, than for every 1% above 80% use, deduction of 1% in cost shall be done for every 1% use above 80%.

Quantity-

Rate-

Amount -

Horizontal aligned Bricks

Quantity-

Rate212

Amount 212

Vertical aligned Bricks

Quantity-

Rate230

Amount 230

Pump sets

Quantity-

Rate-

Amount -

Providing, installation, testing and commissioning of Centrifugal Monoblock pump set conforming to IS 9079 , 2 pole motor operating at synchronised speed of 3000 RPM with requisite MOC impeller, priming funnel, cock, suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply. Motor shall be TEFC type and Pump set shall be suitable for working at various discharge and head requirements as per scope of work. Pump shall be erected on C.C. foundation / cross channels / RSJ frame block with suitable foundation bolts grouted in C.C. foundation block etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions mentioned in TD.

Quantity-

Rate-

Amount -

Centrifugal Monoblock Pump set (Single Stage)

Quantity-

Rate-

Amount -

2.2 KW (3.0 HP)

Quantity-

Rate34070

Amount 34070

3.7 KW (5.0 HP)

Quantity-

Rate43760

Amount 43760

5.5 KW (7.5 HP)

Quantity-

Rate55225

Amount 55225

7.5 KW (10 HP)

Quantity-

Rate67514

Amount 67514

9.3 KW (12.5 HP)

Quantity-

Rate78860

Amount 78860

11.0 KW (15 HP)

Quantity-

Rate83148

Amount 83148

15.0 KW (20.0 HP)

Quantity-

Rate108825

Amount 108825

18.5 KW (25.0 HP)

Quantity-

Rate143629

Amount 143629

Centrifugal Monoblock Pump set (Double Stage)

Quantity-

Rate-

Amount -

3.7 KW (5.0 HP)

Quantity-

Rate50344

Amount 50344

5.5 KW (7.5 HP)

Quantity-

Rate61220

Amount 61220

7.5 KW (10.0 HP)

Quantity-

Rate73509

Amount 73509

9.3 KW (12.5 HP)

Quantity-

Rate81408

Amount 81408

11.0 KW (15.0 HP)

Quantity-

Rate89948

Amount 89948

15.0 KW (20.0 HP)

Quantity-

Rate117644

Amount 117644

Vacuum Pump set (Monoblock)

Quantity-

Rate-

Amount -

Providing, installation, testing and commissioning of Mono block Vacuum pump set with base plate including C.C. foundation / cross channels / RSJ frame and foundation bolts etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge.

Quantity-

Rate-

Amount -

0.75 KW (1 HP), single Ph

Quantity-

Rate31145

Amount 31145

2.2 KW (3 HP), three Ph

Quantity-

Rate56725

Amount 56725

Vacuum Pump set (Coupled)

Quantity-

Rate-

Amount -

Providing, installation, testing and commissioning of Vacuum pump set with horizontal foot mounted TEFC squirrel cage motor working on three phase 50 Hz, 415 Volts +/- 10% with base plate including cost of flexible couplings, coupling guard etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge.

Quantity-

Rate-

Amount -

3.7 KW (5.0 HP)

Quantity-

Rate120824

Amount 120824

7.5 KW (10.0 HP)

Quantity-

Rate148983

Amount 148983

Providing, installation, testing and commissioning of Submerged Centrifugal Pump sets with motor 4 pole synchronised speed of 1500 rpm ( water immersed, dry air filled, class "F" insulated TEWC motor integrally mounted on volute casing pump sets for drinking water ) 3 phase, +/- 3%, 415 volt +/- 10%, along with suitable foundation/ installation device and with 10 mtr cable, material of construction of impeller SS, casing (volute) CI, wearing ring SS, etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions mentioned in TD.

Quantity-

Rate-

Amount -

15 KW

Quantity-

Rate243761

Amount 243761

18.5 KW

Quantity-

Rate300640

Amount 300640

22 KW

Quantity-

Rate357517

Amount 357517

30 KW

Quantity-

Rate487522

Amount 487522

37 KW

Quantity-

Rate598068

Amount 598068

45 KW

Quantity-

Rate633155

Amount 633155

55 KW

Quantity-

Rate813097

Amount 813097

75 KW

Quantity-

Rate902677

Amount 902677

90 KW

Quantity-

Rate1221495

Amount 1221495

110 KW

Quantity-

Rate1503260

Amount 1503260

125 KW

Quantity-

Rate1648764

Amount 1648764

132 KW

Quantity-

Rate1738837

Amount 1738837

160 KW

Quantity-

Rate2002177

Amount 2002177

180 KW

Quantity-

Rate2127112

Amount 2127112

200 KW

Quantity-

Rate2552534

Amount 2552534

Providing, installation, testing and commissioning of submersible Monoblock pump set conforming to IS 8034 and 2 pole motor operating at synchronised speed of speed 3000 RPM, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz AC and with water lubricated bearing to accept entire hydraulic thrust. Supply, with cable guard, thrust carbon/fibre bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump and minimum 6 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following posion : Less than 1.6 mm Variation in thickness: Less than 3.2 mm)

Quantity-

Rate-

Amount -

2.2 KW (3.0 HP)

Quantity-

Rate35932

Amount 35932

3.7 KW (5.0 HP)

Quantity-

Rate39941

Amount 39941

5.5 KW (7.5 HP)

Quantity-

Rate53789

Amount 53789

7.5 KW (10 HP)

Quantity-

Rate60640

Amount 60640

9.3 KW (12.5 HP)

Quantity-

Rate76487

Amount 76487

11.0 KW (15 HP)

Quantity-

Rate85567

Amount 85567

15.0 KW (20.0 HP)

Quantity-

Rate101747

Amount 101747

Providing, installation, testing and commissioning of submersible dewatering pump set conforming to relevant IS codes and as per scope of work and Technical Specifications, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft, impeller, pump and motor body. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard. The pump set shall be suitable for direct coupling, with suitable suction strainer etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions mentioned in TD.

Quantity-

Rate-

Amount -

0.75 KW (1.0 HP)

Quantity-

Rate40555

Amount 40555

1.5 KW (2.0 HP)

Quantity-

Rate46501

Amount 46501

2.2 KW (3.0 HP)

Quantity-

Rate80307

Amount 80307

3.7 KW (5.0 HP )

Quantity-

Rate107500

Amount 107500

Providing and fixing at site with necessary packing, Horizontal Centrifugal Split Casting pumps with 4 pole induction motor operating at synchronised speed of speed 1500 RPM as per IS 12615: 2011 or amended up to date , CI casing and casing ring, SS 316 impeller, SS 410 Shaft and shaft sleeve, coupling guard, common base plate, foundation bolts, Cement concrete foundation etc. complete with all respect as per the specification and scope of work and direction of Engineer in Charge of following range of duty conditions. Note: Duty condition of required pump shall also be mentioned in BoQ.

Quantity-

Rate-

Amount -

Discharge 20 to 30 LPS and head 20 to 30 M

Quantity-

Rate166357

Amount 166357

Discharge 20 to 30 LPS and head 31 to 40 M

Quantity-

Rate242227

Amount 242227

Discharge 20 to 30 LPS and head 41 to 50 M

Quantity-

Rate285634

Amount 285634

Discharge 20 to 30 LPS and head 51 to 60 M

Quantity-

Rate327309

Amount 327309

Discharge 20 to 30 LPS and head 61 to 70 M

Quantity-

Rate417667

Amount 417667

Discharge 20 to 30 LPS and head 71 to 80 M

Quantity-

Rate417667

Amount 417667

Discharge 20 to 30 LPS and head 81 to 90 M

Quantity-

Rate417667

Amount 417667

Discharge 31 t0 40 LPS and head 20 to 30 M

Quantity-

Rate242227

Amount 242227

Discharge 31 t0 40 LPS and head 31 to 40 M

Quantity-

Rate285634

Amount 285634

Discharge 31 t0 40 LPS and head 41 to 50 M

Quantity-

Rate327309

Amount 327309

Discharge 31 t0 40 LPS and head 51 to 60 M

Quantity-

Rate417667

Amount 417667

Discharge 31 t0 40 LPS and head 61 to 70 M

Quantity-

Rate492515

Amount 492515

Discharge 31 to 40 LPS and head 71 to 80 M

Quantity-

Rate492515

Amount 492515

Discharge 31 to 40 LPS and head 81 to 90 M

Quantity-

Rate574432

Amount 574432

Discharge 41 t0 50 LPS and head 20 to 30 M

Quantity-

Rate285634

Amount 285634

Discharge 41 t0 50 LPS and head 31 to 40 M

Quantity-

Rate417667

Amount 417667

Discharge 41 t0 50 LPS and head 41 to 50 M

Quantity-

Rate417667

Amount 417667

Discharge 41 t0 50 LPS and head 51 to 60 M

Quantity-

Rate492515

Amount 492515

Discharge 41 t0 50 LPS and head 61 to 70 M

Quantity-

Rate574432

Amount 574432

Discharge 41 to 50 LPS and head 71 to 80 M

Quantity-

Rate672571

Amount 672571

Discharge 41 to 50 LPS and head 81 to 90 M

Quantity-

Rate672571

Amount 672571

Discharge 51 to 60 LPS and head 20 to 30 M

Quantity-

Rate327309

Amount 327309

Discharge 51 to 60 LPS and head 31 to 40 M

Quantity-

Rate417667

Amount 417667

Discharge 51 to 60 LPS and head 41 to 50 M

Quantity-

Rate492515

Amount 492515

Discharge 51 to 60 LPS and head 51 to 60 M

Quantity-

Rate574432

Amount 574432

Discharge 51 to 60 LPS and head 61 to 70 M

Quantity-

Rate672571

Amount 672571

Discharge 51 to 60 LPS and head 71 to 80 M

Quantity-

Rate858245

Amount 858245

Discharge 51 to 60 LPS and head 81 to 90 M

Quantity-

Rate858245

Amount 858245

Discharge 61 to 70 LPS and head 20 to 30 M

Quantity-

Rate327309

Amount 327309

Discharge 61 to 70 LPS and head 31 to 40 M

Quantity-

Rate417667

Amount 417667

Discharge 61 to 70 LPS and head 41 to 50 M

Quantity-

Rate574432

Amount 574432

Discharge 61 to 70 LPS and head 51 to 60 M

Quantity-

Rate672571

Amount 672571

Discharge 61 to 70 LPS and head 61 to 70 M

Quantity-

Rate858245

Amount 858245

Discharge 61 to 70 LPS and head 71 to 80 M

Quantity-

Rate858245

Amount 858245

Discharge 61 to 70 LPS and head 81 to 90 M

Quantity-

Rate990485

Amount 990485

Discharge 71 to 80 LPS and head 20 to 30 M

Quantity-

Rate417667

Amount 417667

Discharge 71 to 80 LPS and head 31 to 40 M

Quantity-

Rate492515

Amount 492515

Discharge 71 to 80 LPS and head 41 to 50 M

Quantity-

Rate672571

Amount 672571

Discharge 71 to 80 LPS and head 51 to 60 M

Quantity-

Rate858245

Amount 858245

Discharge 71 to 80 LPS and head 61 to 70 M

Quantity-

Rate858245

Amount 858245

Discharge 71 to 80 LPS and head 71 to 80 M

Quantity-

Rate990485

Amount 990485

Discharge 71 to 80 LPS and head 81 to 90 M

Quantity-

Rate1159705

Amount 1159705

Discharge 81 to 90 LPS and head 20 to 30 M

Quantity-

Rate417667

Amount 417667

Discharge 81 to 90 LPS and head 31 to 40 M

Quantity-

Rate574432

Amount 574432

Discharge 81 to 90 LPS and head 41 to 50 M

Quantity-

Rate672571

Amount 672571

Discharge 81 to 90 LPS and head 51 to 60 M

Quantity-

Rate858245

Amount 858245

Discharge 81 to 90 LPS and head 61 to 70 M

Quantity-

Rate858245

Amount 858245

Discharge 81 to 90 LPS and head 71 to 80 M

Quantity-

Rate1159705

Amount 1159705

Discharge 81 to 90 LPS and head 81 to 90 M

Quantity-

Rate1159705

Amount 1159705

Discharge 91 to 100 LPS and head 20 to 30 M

Quantity-

Rate492515

Amount 492515

Discharge 91 to 100 LPS and head 31 to 40 M

Quantity-

Rate672571

Amount 672571

Discharge 91 to 100 LPS and head 41 to 50 M

Quantity-

Rate858245

Amount 858245

Discharge 91 to 100 LPS and head 51 to 60 M

Quantity-

Rate858245

Amount 858245

Discharge 91 to 100 LPS and head 61 to 70 M

Quantity-

Rate990485

Amount 990485

Discharge 91 to 100 LPS and head 71 to 80 M

Quantity-

Rate1159705

Amount 1159705

Discharge 91 to 100 LPS and head 81 to 90 M

Quantity-

Rate1282285

Amount 1282285

Discharge 101 to 120 LPS and head 20 to 30 M

Quantity-

Rate492515

Amount 492515

Discharge 101 to 120 LPS and head 31 to 40 M

Quantity-

Rate672571

Amount 672571

Discharge 101 to 120 LPS and head 41 to 50 M

Quantity-

Rate858245

Amount 858245

Discharge 101 to 120 LPS and head 51 to 60 M

Quantity-

Rate990485

Amount 990485

Discharge 101 to 120 LPS and head 61 to 70 M

Quantity-

Rate1159705

Amount 1159705

Discharge 101to 120 LPS and head 71 to 80 M

Quantity-

Rate1159705

Amount 1159705

Discharge 101to 120 LPS and head 81 to 90 M

Quantity-

Rate1556866

Amount 1556866

Discharge 121 to 140 LPS and head 20 to 30 M

Quantity-

Rate574432

Amount 574432

Discharge 121 to 140 LPS and head 31 to 40 M

Quantity-

Rate858245

Amount 858245

Discharge 121 to 140 LPS and head 41 to 50 M

Quantity-

Rate990485

Amount 990485

Discharge 121 to 140 LPS and head 51 to 60 M

Quantity-

Rate1159705

Amount 1159705

Discharge 121 to 140 LPS and head 61 to 70 M

Quantity-

Rate1159705

Amount 1159705

Discharge 121 to 140 LPS and head 71 to 80 M

Quantity-

Rate1338395

Amount 1338395

Discharge 121 to 140 LPS and head 81 to 90 M

Quantity-

Rate1556866

Amount 1556866

Discharge 141 to 160 LPS and head 20 to 30 M

Quantity-

Rate672571

Amount 672571

Discharge 141 to 160 LPS and head 31 to 40 M

Quantity-

Rate858245

Amount 858245

Discharge 141 to 160 LPS and head 41 to 50 M

Quantity-

Rate1159705

Amount 1159705

Discharge 141 to 160 LPS and head 51 to 60 M

Quantity-

Rate1282285

Amount 1282285

Discharge 141 to 160 LPS and head 61 to 70 M

Quantity-

Rate1556866

Amount 1556866

Discharge 141 to 160 LPS and head 71 to 80 M

Quantity-

Rate1556866

Amount 1556866

Discharge 141 to 160 LPS and head 81 to 90 M

Quantity-

Rate1855336

Amount 1855336

Discharge 161 to 180 LPS and head 20 to 30 M

Quantity-

Rate858245

Amount 858245

Discharge 161 to 180 LPS and head 31 to 40 M

Quantity-

Rate990485

Amount 990485

Discharge 161 to 180 LPS and head 41 to 50 M

Quantity-

Rate1159705

Amount 1159705

Discharge 161 to 180 LPS and head 51 to 60 M

Quantity-

Rate1338395

Amount 1338395

Discharge 161 to 180 LPS and head 61 to 70 M

Quantity-

Rate1556866

Amount 1556866

Discharge 161 to 180 LPS and head 71 to 80 M

Quantity-

Rate1707880

Amount 1707880

Discharge 161 to 180 LPS and head 81 to 90 M

Quantity-

Rate1855336

Amount 1855336

Discharge 181 to 200 LPS and head 20 to 30 M

Quantity-

Rate858245

Amount 858245

Discharge 181 to 200 LPS and head 31 to 40 M

Quantity-

Rate1159705

Amount 1159705

Discharge 181 to 200 LPS and head 41 to 50 M

Quantity-

Rate1282285

Amount 1282285

Discharge 181 to 200 LPS and head 51 to 60 M

Quantity-

Rate1556866

Amount 1556866

Discharge 181 to 200 LPS and head 61 to 70 M

Quantity-

Rate1707880

Amount 1707880

Discharge 181 to 200 LPS and head 71 to 80 M

Quantity-

Rate1999666

Amount 1999666

Discharge 181 to 200 LPS and head 81 to 90 M

Quantity-

Rate2211026

Amount 2211026

Quantity-

Rate-

Amount -

Discharge 201 to 220 LPS and head 20 to 30 M

Quantity-

Rate858245

Amount 858245

Discharge 201 to 220 LPS and head 31 to 40 M

Quantity-

Rate1159705

Amount 1159705

Discharge 201 to 220 LPS and head 41 to 50 M

Quantity-

Rate1556866

Amount 1556866

Discharge 201 to 220 LPS and head 51 to 60 M

Quantity-

Rate1707880

Amount 1707880

Discharge 201 to 220 LPS and head 61 to 70 M

Quantity-

Rate1855336

Amount 1855336

Discharge 221 to 240 LPS and head 20 to 30 M

Quantity-

Rate990485

Amount 990485

Discharge 221 to 240 LPS and head 31 to 40 M

Quantity-

Rate1282285

Amount 1282285

Discharge 221 to 240 LPS and head 41 to 50 M

Quantity-

Rate1556866

Amount 1556866

Discharge 221 to 240 LPS and head 51 to 60 M

Quantity-

Rate1855336

Amount 1855336

Discharge 221 to 240 LPS and head 61 to 70 M

Quantity-

Rate1999666

Amount 1999666

Discharge 241 to 260 LPS and head 20 to 30 M

Quantity-

Rate990485

Amount 990485

Discharge 241 to 260 LPS and head 31 to 40 M

Quantity-

Rate1338395

Amount 1338395

Discharge 241 to 260 LPS and head 41 to 50 M

Quantity-

Rate1556866

Amount 1556866

Discharge 241 to 260 LPS and head 51 to 60 M

Quantity-

Rate1855336

Amount 1855336

Discharge 241 to 260 LPS and head 61 to 70 M

Quantity-

Rate2211026

Amount 2211026

Discharge 261 to 280 LPS and head 20 to 30 M

Quantity-

Rate1159705

Amount 1159705

Discharge 261 to 280 LPS and head 31 to 40 M

Quantity-

Rate1556866

Amount 1556866

Discharge 261 to 280 LPS and head 41 to 50 M

Quantity-

Rate1707880

Amount 1707880

Discharge 261 to 280 LPS and head 51 to 60 M

Quantity-

Rate1999666

Amount 1999666

Discharge 261 to 280 LPS and head 61 to 70 M

Quantity-

Rate2383025

Amount 2383025

Discharge 281 to 300 LPS and head 20 to 30 M

Quantity-

Rate1159705

Amount 1159705

Discharge 281 to 300 LPS and head 31 to 40 M

Quantity-

Rate1556866

Amount 1556866

Discharge 281 to 300 LPS and head 41 to 50 M

Quantity-

Rate1855336

Amount 1855336

Discharge 281 to 300 LPS and head 51 to 60 M

Quantity-

Rate1999666

Amount 1999666

Discharge 281 to 300 LPS and head 61 to 70 M

Quantity-

Rate2383025

Amount 2383025

Discharge 301 to 325 LPS and head 20 to 30 M

Quantity-

Rate1282285

Amount 1282285

Discharge 301 to 325 LPS and head 31 to 40 M

Quantity-

Rate1556866

Amount 1556866

Discharge 301 to 325 LPS and head 41 to 50 M

Quantity-

Rate1999666

Amount 1999666

Discharge 301 to 325 LPS and head 51 to 60 M

Quantity-

Rate2211026

Amount 2211026

Discharge 301 to 325 LPS and head 61 to 70 M

Quantity-

Rate2651461

Amount 2651461

Discharge 326 to 350 LPS and head 20 to 30 M

Quantity-

Rate1282285

Amount 1282285

Discharge 326 to 350 LPS and head 31 to 40 M

Quantity-

Rate1707880

Amount 1707880

Discharge 326 to 350 LPS and head 41 to 50 M

Quantity-

Rate1999666

Amount 1999666

Discharge 326 to 350 LPS and head 51 to 60 M

Quantity-

Rate2383025

Amount 2383025

Discharge 326 to 350 LPS and head 61 to 70 M

Quantity-

Rate2651461

Amount 2651461

Discharge 351 to 400 LPS and head 20 to 30 M

Quantity-

Rate1556866

Amount 1556866

Discharge 351 to 400 LPS and head 31 to 40 M

Quantity-

Rate1855336

Amount 1855336

Discharge 351 to 400 LPS and head 41 to 50 M

Quantity-

Rate2211026

Amount 2211026

Discharge 351 to 400 LPS and head 51 to 60 M

Quantity-

Rate2651461

Amount 2651461

Discharge 351 to 400 LPS and head 61 to 70 M

Quantity-

Rate2912679

Amount 2912679

Valves and Appurtenances

Quantity-

Rate-

Amount -

Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves straight and pocket less body passage of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - AISI- 410 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date) ,Epoxy ( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel Insertion rubber of black EPDM 6mm thick . Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.

Quantity-

Rate-

Amount -

Manually Operated CI Sluice valve of Class PN-1.0

Quantity-

Rate-

Amount -

80 mm HW

Quantity-

Rate6301

Amount 6301

100 mm HW

Quantity-

Rate8649

Amount 8649

125 mm HW

Quantity-

Rate11173

Amount 11173

150 mm HW

Quantity-

Rate13595

Amount 13595

200 mm HW

Quantity-

Rate22603

Amount 22603

250 mm HW

Quantity-

Rate35722

Amount 35722

300 mm HW

Quantity-

Rate45382

Amount 45382

Motorized Sluice Valves with Electric Actuator with integral starter of Class PN 1.0

Quantity-

Rate-

Amount -

80 mm dia

Quantity-

Rate118496

Amount 118496

100 mm dia

Quantity-

Rate122294

Amount 122294

125 mm dia

Quantity-

Rate126666

Amount 126666

150 mm dia

Quantity-

Rate133417

Amount 133417

200 mm dia

Quantity-

Rate151343

Amount 151343

250 mm dia

Quantity-

Rate171551

Amount 171551

300 mm dia

Quantity-

Rate182779

Amount 182779

Providing, lowering, laying, aligning, fixing in position CI D/F short body pattern type butterfly valves having body, disc and end cover in graded cast iron generally conforming to (IS13095/1991amended up to date), synthetic rubber faced ring secured on disc by retaining ring with SS steel screw stub shaft of SS riding in Teflon bearing including C.C. foundation/ structural steel support, material, labour, testing along with pipe line and commissioning as per Technical Specifications and as per direction of Engineer in charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work

Quantity-

Rate-

Amount -

Manually Operated Butterfly Valve PN-1.0

Quantity-

Rate-

Amount -

100 mm dia ( With lever operated)

Quantity-

Rate12762

Amount 12762

125 mm dia ( With lever operated)

Quantity-

Rate17582

Amount 17582

150 mm dia ( With lever operated)

Quantity-

Rate21877

Amount 21877

200 mm dia (With Gear Operated)

Quantity-

Rate32923

Amount 32923

250 mm dia (With Gear Operated)

Quantity-

Rate41797

Amount 41797

300 mm dia (With Gear Operated)

Quantity-

Rate52123

Amount 52123

350 mm dia (With Gear Operated)

Quantity-

Rate65006

Amount 65006

Providing, lowering, aligning, fixing in position in pipe line, CI double flanged swing type Non Return Valves (NRV) of approved make of following Pressure rating & dia complete, confirming to IS: 5312 (part -1)/ 2004 (amended up to date) and of following specifications: Body, Cover & disc of Grey cast iron of IS:210/ FG200. Face to face dimensions as per IS 5312 (part -1):2004 , Flanges Drilled as per IS:1538. Epoxy (Non-Toxic & suitable for drinking water) applied on body, cover and disc inside and outside . Body seat ring of SS/CS Door face ring - EPDM/ Neoprene (food grade quality) ,Shaft of SS- AISI- 410 ,Hinge Malleable cast iron / SS AISI 316 ,Bonnet Gasket EPDM, Bush- Leaded tin Bronze/ PTET, Gasket EPDM/NBR ,Nut-Bolt as per IS:1363 and IS: 1367 (galvanised steel) ,Insertion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in- charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.

Quantity-

Rate-

Amount -

Class PN 1.0

Quantity-

Rate-

Amount -

80 mm dia

Quantity-

Rate6219

Amount 6219

100 mm dia

Quantity-

Rate7973

Amount 7973

125 mm dia

Quantity-

Rate10452

Amount 10452

150 mm dia

Quantity-

Rate13107

Amount 13107

200 mm dia

Quantity-

Rate22519

Amount 22519

250 mm dia

Quantity-

Rate36559

Amount 36559

300 mm dia

Quantity-

Rate50411

Amount 50411

350 mm dia

Quantity-

Rate88822

Amount 88822

Providing, lowering, aligning, fixing in position in pipe line, CI double flanged Dual plate check valve of approved make of following Pressure rating & dia complete, as per API: 594/ API: 598 and of following specifications: Body & Cover of Grey cast iron of IS:210/ FG200 , Disc / plates - Cast steel ,Disc seal ring of EPDM/ NBR (food grade quality) ,Body seat of SS ,Face to face dimensions as per API: 594 ,Flanges Drilled as per IS:1538. Epoxy (Non-Toxic & suitable for drinking water) applied on body & cover inside and outside . Shaft/Stop Pin of SS- AISI- 304/410 , Hinge SS AISI 316/304 / CS ,Spring SS AISI 316/304 , Bonnet Gasket EPDM ,Bush- Brass with EPDM/NBR "O "ring seal.Nut-Bolt confirming to IS:1363 and IS: 1367 (galvanised steel) ,Insertion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.

Quantity-

Rate-

Amount -

Class PN 1.0

Quantity-

Rate-

Amount -

80 mm dia

Quantity-

Rate6055

Amount 6055

100 mm dia

Quantity-

Rate7694

Amount 7694

125 mm dia

Quantity-

Rate9640

Amount 9640

150 mm dia

Quantity-

Rate12719

Amount 12719

200 mm dia

Quantity-

Rate21892

Amount 21892

250 mm dia

Quantity-

Rate34618

Amount 34618

300 mm dia

Quantity-

Rate46370

Amount 46370

Providing, lowering, aligning, fixing in position and Jointing in pipe line, CI single Air Valve Flanged/ Screwed type of approved makes for following pressure rating & dia complete, confirming to IS: 14845-2000 (amended up to date) and of following specifications: Body , Cover and Cowl - Grey Cast Iron as per IS:210- FG 200 ,Float Stainless Steel AISI 304 / IS: 3444 ,Float Guide- HBT1,Body seat ring - Leaded tin bronze/ SS , Seal ring and face ring - EPDM/NBR, Ends flanged according to IS 6418 or Screwed type shall have external pipe threads conforming to IS 554 Fasteners - CS Epoxy paint inside outside of food grade safe for drinking water ,Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge. Note: Rates are exclusive of connecting tee, pipe piece and earth work.

Quantity-

Rate-

Amount -

Class PN 1.0

Quantity-

Rate-

Amount -

15 mm S-1 Type

Quantity-

Rate2423

Amount 2423

25 mm S-1 Type

Quantity-

Rate3145

Amount 3145

40 mm S-1 Type

Quantity-

Rate3912

Amount 3912

50 mm S-2 Type

Quantity-

Rate4590

Amount 4590

Class PN 1.6

Quantity-

Rate-

Amount -

15 mm S-1 Type

Quantity-

Rate2587

Amount 2587

25 mm S-1 Type

Quantity-

Rate3296

Amount 3296

40 mm S-1 Type

Quantity-

Rate4046

Amount 4046

50 mm S-2 Type

Quantity-

Rate4811

Amount 4811

Providing, lowering, aligning, fixing in position and Jointing in pipe line, CI Double Acting Kinetic Air Valve with isolating Sluice Valve of approved makes for following pressure rating & dia complete, confirming to IS: 14845-2000 (amended up to date) and of following specifications: Body , Cover and Cowl - Grey Cast Iron as per IS:210- FG 200 ,Float - Stainless Steel AISI 304 / IS: 3444 , Float Guide- HBT1.HP Orifice- HTB2/ SS,Body seat ring - Leaded tin bronze/ SS .Seal ring and face ring - EPDM/NBR ,Ends flanged according to IS 6418,Fastners - CS, Epoxy paint inside outside of food grade safe for drinking water ,Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge. Note: Rates are exclusive of connecting tee, pipe piece and earth work.

Quantity-

Rate-

Amount -

Class PN 1.0

Quantity-

Rate-

Amount -

40 mm

Quantity-

Rate11616

Amount 11616

50 mm

Quantity-

Rate13234

Amount 13234

80 mm

Quantity-

Rate17112

Amount 17112

100 mm

Quantity-

Rate23250

Amount 23250

150 mm

Quantity-

Rate48594

Amount 48594

200 mm

Quantity-

Rate74101

Amount 74101

Class PN 1.6

Quantity-

Rate-

Amount -

40 mm

Quantity-

Rate12431

Amount 12431

50 mm

Quantity-

Rate14126

Amount 14126

80 mm

Quantity-

Rate17858

Amount 17858

100 mm

Quantity-

Rate24184

Amount 24184

150 mm

Quantity-

Rate51118

Amount 51118

200 mm

Quantity-

Rate77713

Amount 77713

Providing, lowering, aligning, fixing in position and Jointing in pipe line, CI Body Flanged End Tamper proof Kinetic Air Valve of approved makes of following pressure rating and dia and as per following specifications: Governing standard - AWWA C512/ IS:14845:2000(amended up to date),Body, High pressure cover , Low pressure cover, Cowl and Joint support ring - Grey cast iron of grade IS:210/FG200 ,Float- LP ball & HP ball : AISI 304 stainless Steel, Float Guide- HTB1,Seat ring & Gasket - EPDM/NBR, HP Orifice & HP orifice plug : HTB2/ SS ,Bush: Bronze , Flanges as per IS/ BS, Drilled as per IS:1538. Epoxy paint (Non-Toxic & suitable for drinking water) applied on body & cover inside and outside Fasteners - CS/ Galvanised steel ,Outlet of big orifice will have a screen to prevent Tamper of float, with CI metal seated D/F Non rising stem Sluice Valves as per (IS: 14846 amended up to date) PN 1.0 ratings Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge. Note: Rates are exclusive of connecting tee, pipe piece and earth work.

Quantity-

Rate-

Amount -

Class PN 1.0

Quantity-

Rate-

Amount -

40 mm

Quantity-

Rate12811

Amount 12811

50 mm

Quantity-

Rate14038

Amount 14038

80 mm

Quantity-

Rate17304

Amount 17304

100 mm

Quantity-

Rate23227

Amount 23227

150 mm

Quantity-

Rate39551

Amount 39551

200 mm

Quantity-

Rate57592

Amount 57592

Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2 1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS AISI 316/410 Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insertion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in- charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.

Quantity-

Rate-

Amount -

Manually Operated Resilient Seated Sluice Valves of Class PN 1.6

Quantity-

Rate-

Amount -

80 mm dia

Quantity-

Rate9137

Amount 9137

100 mm dia

Quantity-

Rate11554

Amount 11554

125 mm dia

Quantity-

Rate17087

Amount 17087

150 mm dia

Quantity-

Rate19109

Amount 19109

200 mm dia

Quantity-

Rate29396

Amount 29396

250 mm dia

Quantity-

Rate48781

Amount 48781

300 mm dia

Quantity-

Rate62128

Amount 62128

Motorized Sluice Valves with Electric Actuator and integral starter of Class PN 1.0

Quantity-

Rate-

Amount -

80 mm dia

Quantity-

Rate120451

Amount 120451

100 mm dia

Quantity-

Rate123908

Amount 123908

125 mm dia

Quantity-

Rate131735

Amount 131735

150 mm dia

Quantity-

Rate136800

Amount 136800

200 mm dia

Quantity-

Rate155060

Amount 155060

250 mm dia

Quantity-

Rate177836

Amount 177836

300 mm dia

Quantity-

Rate194973

Amount 194973

Motorized Sluice Valves with Electric Actuator and integral starter of Class PN 1.6

Quantity-

Rate-

Amount -

80 mm dia

Quantity-

Rate121297

Amount 121297

100 mm dia

Quantity-

Rate124743

Amount 124743

125 mm dia

Quantity-

Rate132962

Amount 132962

150 mm dia

Quantity-

Rate139701

Amount 139701

200 mm dia

Quantity-

Rate155351

Amount 155351

250 mm dia

Quantity-

Rate177684

Amount 177684

300 mm dia

Quantity-

Rate193924

Amount 193924

350 mm dia

Quantity-

Rate256125

Amount 256125

Providing, lowering, aligning, fixing in position in pipe line, DI D/F resilient seated (soft seated) short body pattern type double eccentric Butterfly valves of approved make of following class & dia complete confirming to BS EN 593/ BS 5155/ IS 13095/1991 amended up to date and of following specifications: Body, disc and end cover of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Face to face dimensions as per DIN 3202 F4/ IS 13095 Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on both body and disc inside and outside. Disc seal ring of EPDM/ Neoprene (food grade quality) and disc seal retaining ring of SS/CS. Shaft of SS- AISI- 410/316 & shaft bearings- bronze/ PTET or Teflon with EPDM/NBR "O "ring seal, Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insertion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in- charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.

Quantity-

Rate-

Amount -

Class PN 1.6, Manually Operated with Gear

Quantity-

Rate-

Amount -

100 mm dia

Quantity-

Rate50005

Amount 50005

150 mm dia

Quantity-

Rate57538

Amount 57538

200 mm dia

Quantity-

Rate59837

Amount 59837

250 mm dia

Quantity-

Rate66241

Amount 66241

300 mm dia

Quantity-

Rate74691

Amount 74691

350 mm dia

Quantity-

Rate93544

Amount 93544

Providing, lowering, aligning, fixing in position in pipe line, DI resilient seated (soft seated) Concentric Wafer type, Butterfly valves of approved make of following Pressure rating & dia complete confirming to BS EN 593/ BS 5155/ IS 13095/1991 amended up to date and of following specifications: Body- Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Disc - DI (same as body material) / CS, Face to face dimensions as per DIN 3202 F4/ IS 13095 , Flanges Drilled as per IS:1538 ,Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on both body and disc inside and outside . Liner & Disc seal - EPDM/ Neoprene (food grade quality) ,Shaft of SS- AISI- 410/420 & shaft bearings- bronze/ PTET or Teflon with EPDM/NBR "O "ring seal , Nut-Bolt confirming to IS:1363 and IS: 1367/ Galvanised steel, Insertion rubber of black EPDM 6mm thick ,Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.

Quantity-

Rate-

Amount -

Class PN 1.6, Wafer Type

Quantity-

Rate-

Amount -

80 mm (Lever Operated)

Quantity-

Rate10585

Amount 10585

100 mm (Lever Operated)

Quantity-

Rate12783

Amount 12783

125 mm (Lever Operated

Quantity-

Rate21548

Amount 21548

150 mm (Lever Operated)

Quantity-

Rate23397

Amount 23397

200 mm (with Gear)

Quantity-

Rate35284

Amount 35284

250 mm (with Gear)

Quantity-

Rate45556

Amount 45556

300 mm (with Gear)

Quantity-

Rate50571

Amount 50571

Providing, lowering, aligning, fixing in position in pipe line, DI D/F resilient seated (soft seated) Swing type Non Return Valve of approved make of following Pressure rating & dia complete, generally confirming to IS: 5312 (part -1)/ 2004 (amended up to date) and of following specifications: Body, Bonnet & disc of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Face to face dimensions as per IS 5312 (part -1):2004 Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body, cover and disc inside and outside . Disc seal ring of EPDM/ Neoprene (food grade quality) and disc seal retaining ring of SS/CS.Shaft of SS- AISI- 410, Hinge SS AISI 316/410 ,Bonnet Gasket EPDM ,Bush- Brass with EPDM/NBR "O "ring seal Nut- Bolt confirming to IS:1363 and IS: 1367 (galvanised steel) Insertion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.

Quantity-

Rate-

Amount -

Class PN 1.6

Quantity-

Rate-

Amount -

80 mm dia

Quantity-

Rate9458

Amount 9458

100 mm dia

Quantity-

Rate12598

Amount 12598

125 mm dia

Quantity-

Rate17774

Amount 17774

150 mm dia

Quantity-

Rate21821

Amount 21821

200 mm dia

Quantity-

Rate37011

Amount 37011

250 mm dia

Quantity-

Rate55783

Amount 55783

300 mm dia

Quantity-

Rate76588

Amount 76588

Providing, lowering, aligning, fixing in position in pipe line, DI double flanged resilient seated Dual plate check valve of approved make of following Pressure rating & dia complete, as per API: 594/ API: 598 and of following specifications: Body & Bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Disc / plates - SG-400/12 or CF-8M,Face to face dimensions as per API: 594 , Flanges Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body and cover inside and outside . Disc seal ring of EPDM/ Neoprene (food grade quality) and disc seal retaining ring of SS/CS. Shaft of SS- AISI- 410 , Hinge SS AISI 316/304,Spring SS AISI 316/304,Bonnet Gasket EPDM ,Bush- Brass with EPDM/NBR "O "ring seal, Nut-Bolt confirming to IS:1363 and IS: 1367 (galvanised steel) , Insertion rubber of black EPDM 6mm thick .Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.

Quantity-

Rate-

Amount -

Class PN 1.6

Quantity-

Rate-

Amount -

80 mm dia

Quantity-

Rate11584

Amount 11584

100 mm dia

Quantity-

Rate13362

Amount 13362

125 mm dia

Quantity-

Rate14224

Amount 14224

150 mm dia

Quantity-

Rate20940

Amount 20940

200 mm dia

Quantity-

Rate36510

Amount 36510

250 mm dia

Quantity-

Rate55072

Amount 55072

300 mm dia

Quantity-

Rate77472

Amount 77472

Providing, lowering, aligning, fixing in position and Jointing in pipe line, DI Body Flanged End Tamper proof Kinetic Air Valve of approved makes of following pressure rating and dia and as per following specifications: Governing standard - AWWA C512/ IS:14845:2000(amended up to date) Body, High pressure cover , Low pressure cover, Cowl and Joint support ring - Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865, Float- LP ball & HP ball : AISI 304 stainless Steel, Seat ring & Gasket - EPDM/NBR ,HP Orifice & HP orifice plug : Bronze/ SS ,Bush: Bronze ,Flanges as per IS/ BS, Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body & cover inside and outside fasteners - CS/ Galvanised steel, Outlet of big orifice will have a screen to prevent Tamper of float, with DI metal seated D/F Non rising stem Sluice Valves as per (IS: 14846 amended up to date) PN 1.6 ratings Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge. Note: Rates are exclusive of connecting tee, pipe piece and earth work.

Quantity-

Rate-

Amount -

Class PN 1.6

Quantity-

Rate-

Amount -

40 mm dia

Quantity-

Rate13021

Amount 13021

50 mm dia

Quantity-

Rate13499

Amount 13499

80 mm dia

Quantity-

Rate17236

Amount 17236

100 mm dia

Quantity-

Rate23449

Amount 23449

150 mm dia

Quantity-

Rate40162

Amount 40162

200 mm dia

Quantity-

Rate55019

Amount 55019

Providing, lowering, aligning, fixing in position and Jointing in pipe line, combination Air Release Valve Kinetic type with single chamber housed Double orifice and have 3 functions, large Air exhaust, small Air venting and large air intake during vacuum of pipeline of approved makes of following pressure rating and dia and as per following specifications: Governing standard - AWWA C512 ,Body and bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865,Float & internal trim: AISI 304 stainless Steel, Seat ring & Gasket - EPDM/NBR Drilled as per IS:1538. Electrostatic Epoxy Powder(EP- P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body & cover inside and outside Fasteners - CS/ Galvanised steel ,Outlet of big orifice will have a screen to prevent Tamper of float, Big orifice size should be equal or larger than the inlet flange bore, for fully comply with AWWA C512. ), Valve including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge. Note: Rates are exclusive of connecting tee, pipe piece and earth work.

Quantity-

Rate-

Amount -

Class PN 1.6

Quantity-

Rate-

Amount -

50 mm dia

Quantity-

Rate18064

Amount 18064

80 mm dia

Quantity-

Rate23209

Amount 23209

100 mm dia

Quantity-

Rate31051

Amount 31051

150 mm dia

Quantity-

Rate49563

Amount 49563

200 mm dia

Quantity-

Rate62215

Amount 62215

Providing, lowering, aligning & fixing in position DI D/F Plunger Type Flow Control Valve of approved make of following Pressure rating & dia complete and of following specifications: Body- Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or EN-JS 1030, Plunger/ Piston - Stainless steel AISI- 304/ Gr 1.4301, Piston Guides- Bronze Welded Overlay / SS Shaft/Crank/Spindle- Stainless steel AISI- 410/ Gr 1.4021 Body Seat Ring- Stainless steel AISI- 316/304/ Bronze IS:318- LTB2 ,Seal ( O- ring / Quad ring)- EPDM/ NBR, Bearing Bush - Bronze IS:318- LTB2,Slotted cylinder / Strainer / Diffuser- AISI- 420/ 304,Nut- Bolts - SS, Face to Face- as per ANSI B 16.1/ EN 558-1 and Flange ends should be as per ANSI B-16.5, Class 150 and Class 300/ EN-1092-2. Insertion rubber of black EPDM 6mm thick ,Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied both inside and outside . Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning as per Technical Specification & as per direction of Engineer-In- Charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.

Quantity-

Rate-

Amount -

Plunger Type Flow Control Valve

Quantity-

Rate-

Amount -

80 mm dia

Quantity-

Rate338036

Amount 338036

100mm dia

Quantity-

Rate368438

Amount 368438

125 mm dia

Quantity-

Rate410651

Amount 410651

150mm dia

Quantity-

Rate450548

Amount 450548

200mm dia

Quantity-

Rate552018

Amount 552018

250mm dia

Quantity-

Rate645671

Amount 645671

300mm dia

Quantity-

Rate788276

Amount 788276

350mm dia

Quantity-

Rate829368

Amount 829368

Providing, lowering, aligning and fixing in position DI D/F Diaphragm type Pressure Reducing / Flow Control Valve of approved make of following Pressure rating & dia complete and of following specifications: Body & Bonnet - Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or ASTM A 536, Diaphragm and Resilient seal disc - Flexible, non-wicking nylon fabric reinforced synthetic elastomer -Buna-N / EPDM (FDA / WRAS approved), Body Seat Ring - Cast stainless steel ASTM- A 351 GR. CF8M / AISI- 316, raised, replaceable inline & onsite Stem - Stainless Steel, AISI-316/410, raised, replaceable inline & onsite Spring & Bearing bush- Stainless Steel, AISI-316 ,Disc guide, disc retainer & diaphragm washer - Stainless Steel, AISI-304/ 316/Bronze ,Seal- EPDM/ NBR ,Pilot Body- Stainless Steel, AISI-304/ CF8 or Brass Tubing - Stainless Steel, AISI-304 / Copper ,Solenoid Valve- Stainless Steel, AISI-316 ,Throttling plug - Stainless Steel, AISI-304, Nut- Bolts - SS Face to Face- as per ANSI B 16.1/ EN 558-1 and Flange ends should be as per ANSI B-16.5, Class 150 and Class 300/ EN-1092-2. insertion rubber of black EPDM 6mm thick Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied both inside and outside. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning as per Technical Specification & as per direction of Engineer-In- Charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.

Quantity-

Rate-

Amount -

Pilot operated SCADA Compatible Diaphragm Type Pressure Reducing Valves (Class PN 1.6)

Quantity-

Rate-

Amount -

80 mm dia

Quantity-

Rate114654

Amount 114654

100 mm dia

Quantity-

Rate124190

Amount 124190

125 mm dia

Quantity-

Rate143136

Amount 143136

150 mm dia

Quantity-

Rate169176

Amount 169176

200 mm dia

Quantity-

Rate209789

Amount 209789

250 mm dia

Quantity-

Rate285584

Amount 285584

300 mm dia

Quantity-

Rate376769

Amount 376769

Diaphragm Type Flow Control Valve With Electrical Actuator suitable for SCADA (PN 1.6 )

Quantity-

Rate-

Amount -

80 mm dia

Quantity-

Rate108336

Amount 108336

100 mm dia

Quantity-

Rate119999

Amount 119999

125 mm dia

Quantity-

Rate140144

Amount 140144

150 mm dia

Quantity-

Rate155111

Amount 155111

200 mm dia

Quantity-

Rate181481

Amount 181481

250 mm dia

Quantity-

Rate260901

Amount 260901

300 mm dia

Quantity-

Rate362386

Amount 362386

DOL / Star delta starter type LT panels

Quantity-

Rate-

Amount -

SITC DOL Starter type LT Panel of following rating, all switchgears are of PHED approved makes, CRCA sheet of Panel enclosure is of TATA/ Essar 1.6mm/ 2.0mm thick duly Electrostatic Powder Coated with angle frame including other ancillaries ( Insulators, Acrylic Sheet , Backlight Sheet, Hardware, Wire, Name Plates, Lugs, Pvc Channel , Mcb Chanel , Lock, Hing , Bidding , Connectors, Neutral Links , Spiral , Saddle & Packing Material ) etc. complete as per Technical Specifications and as per direction of Engineer-In-Charge.

Quantity-

Rate-

Amount -

DOL STARTER 2.2 KW (3 HP)- : For 2 motors (1 W+ 1S) I/C - MCB 25A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0- 500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 30/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and O/G- MCB 16A ,TP, 10 KA, C Curve (2), Power Cont 9A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (4-6A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Preventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 2 Kvar (2)

Quantity-

Rate49356

Amount 49356

DOL STARTER 3.7KW (5 HP ) - : For 2 motors (1 W+ 1S) I/C - MCB 32A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0- 500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 30/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and O/G- MCB 25A ,TP, 10 KA, C Curve (2), Power Cont 12A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (7-10A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Preventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 2 Kvar (2)

Quantity-

Rate50413

Amount 50413

DOL STARTER 5.5 KW (7.5HP) - : For 2 motors (1 W+ 1S) I/C - MCB 40A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0- 500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 30/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and O/G- MCB 25A ,TP, 10 KA, C Curve (2), Power Cont 12A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (7-10A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Preventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 2 Kvar (2)

Quantity-

Rate51448

Amount 51448

SITC STAR DELTA Starter type LT Panel of following rating: all switchgears are of PHED approved makes, CRCA sheet of Panel enclosure is of TATA/ Essar 1.6mm/ 2.0mm thick duly Electrostatic Powder Coated with angle frame including other ancillaries ( Insulators, Acrylic Sheet , Backlight Sheet, Hardware, Wire, Name Plates, Lugs, Pvc Channel , Mcb Chanel , Lock, Hing , Bidding , Connectors, Neutral Links , Spiral , Saddle & Packing Material ) etc. and 100A/ 125A ,TPN, Aluminium Bus Bar with Colour coated heat shrinkage sleeves complete as per Technical Specifications and as per direction of Engineer-In-Charge.

Quantity-

Rate-

Amount -

STAR DELTA STARTER 7.5 KW (10.0 HP) - : For 2 motors (1 W+ 1S) I/C - MCB 63A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0- 500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 60/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and O/G- MCB 32A ,TP, 10 KA, C Curve (2), Power Cont 18A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (7-10A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Preventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 5Kvar (2), S/D Timer(2)

Quantity-

Rate65077

Amount 65077

STAR DELTA STARTER 9.3 KW (12.5 HP) - : For 2 motors (1 W+ 1S) I/C - MCB 63A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0- 500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 60/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and O/G- MCB 40A ,TP, 10 KA, C Curve (2), Power Cont 18A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (7-10A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Preventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 5Kvar (2), S/D Timer(2)

Quantity-

Rate66938

Amount 66938

STAR DELTA STARTER 11.0 KW (15.0 HP) - : For 2 motors (1 W+ 1S) I/C - MCB 63A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0- 500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 60/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and O/G- MCB 40A ,TP, 10 KA, C Curve (2), Power Cont 25A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (9-13A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Preventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 7.5Kvar (2), S/D Timer(2)

Quantity-

Rate70561

Amount 70561

STAR DELTA STARTER 15.0 KW (20.0 HP) : For 2 motors (1 W+ 1S) I/C- MCCB 100A TPN 25 KA With T/M Based Over Current & Short Circuit Protection (1),Spreaders (2),Extended Rotary Handle (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 100/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and O/G- MCCB 63A TPN 25 KA With T/M Based Over Current & Short Circuit Protection (2), Power Cont 32A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (12-18A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Preventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 7.5Kvar (2), S/D Timer(2)

Quantity-

Rate99226

Amount 99226

STAR DELTA STARTER 18.5 KW (25.0 HP) - : For 2 motors (1 W+ 1S) I/C- MCCB 125A TPN 25 KA With T/M Based Over Current & Short Circuit Protection (1),Spreaders (2),Extended Rotary Handle (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 125/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and O/G- MCCB 100A TPN 25 KA With T/M Based Over Current & Short Circuit Protection (2), Power Cont 32A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (16-24A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Preventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 10 Kvar (2), S/D Timer(2)

Quantity-

Rate108534

Amount 108534

STAR DELTA STARTER 22.0 KW (30.0 HP) - : For 2 motors (1 W+ 1S) I/C- MCCB 125A TPN 25 KA With T/M Based Over Current & Short Circuit Protection (1),Spreaders (2),Extended Rotary Handle (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 125/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and O/G- MCCB 100A TPN 25 KA With T/M Based Over Current & Short Circuit Protection (2), Power Cont 40A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (23-32A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Preventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 12.5 Kvar (2), S/D Timer(2)

Quantity-

Rate122057

Amount 122057

submersible motor pump set

Quantity-

Rate-

Amount -

Supply & Installation of single phase ISI marked submersible motor pump set of three star or better rating of BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.

Quantity-

Rate-

Amount -

Up to 2.0 KW

Quantity-

Rate16762

Amount 16762

Above 2.0 KW

Quantity-

Rate13050

Amount 13050

Supply & Installation of 3 phase ISI marked submersible motor pump set of three star or better rating of BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.

Quantity-

Rate-

Amount -

Up to 5.5 KW (7.5 HP) & head up to 120 mtr.

Quantity-

Rate9083

Amount 9083

Up to 5.5 KW (7.5 HP) & head above 120 mtr.

Quantity-

Rate9628

Amount 9628

7.5 KW (10 HP) & head up to 120 mtr.

Quantity-

Rate6844

Amount 6844

7.5 KW (10 HP) & head above 120 mtr.

Quantity-

Rate8320

Amount 8320

9.3 KW (12.5 HP) & head up to 120 mtr.

Quantity-

Rate5800

Amount 5800

9.3 KW (12.5 HP) & head above 120 mtr.

Quantity-

Rate7552

Amount 7552

11 KW (15 HP) & head up to 120 mtr.

Quantity-

Rate5614

Amount 5614

11 KW (15 HP) & head above 120 mtr.

Quantity-

Rate6577

Amount 6577

13 KW (17.5 HP) & head up to 120 mtr.

Quantity-

Rate5603

Amount 5603

13 KW (17.5 HP) & head above 120 mtr.

Quantity-

Rate6400

Amount 6400

15 KW (20 HP) and above, head up to 120 mtr.

Quantity-

Rate5580

Amount 5580

15 KW (20 HP) and above, head above 120 mtr.

Quantity-

Rate6320

Amount 6320

Supply and Fixing of Electric feeder panel (having projected canopy)for submersible pump set Single phase up to 5 HP, comprising of DOL Starter, MCB, Indicating Light, Ammeter, Volt meter, connection plate, condensers of approved make and the panel enclosure should be made out from 18 gauge M.S. Sheet with powder coating. Panel size Height 600 mm Width 500 mm depth 250 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18" and double door including in built locking system. The legs should be embedded in M-15 cement concrete platform. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The operation of panel should be suitable for on 240 Volt AC Supply.

Quantity-

Rate10009

Amount 10009

Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB, DOL starter, overload relay, ampere meter, volt meter, phase preventer, phase indicators, lighting arrangement etc. complete suitable for three phase pump set. The panel should have space for energy meter ( supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 300mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18" and double door including in built locking system. The legs should be embedded in M-15 cement concrete platform. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply.

Quantity-

Rate-

Amount -

Up to 5.00 HP

Quantity-

Rate13081

Amount 13081

Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc. complete suitable for three phase pump set. The panel should have space for energy meter ( supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18" and double door including in built locking system. The legs should be embedded in M-15 cement concrete plat form. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply.

Quantity-

Rate-

Amount -

Above 5 HP and up to 10 HP

Quantity-

Rate24273

Amount 24273

Above 10 HP and up to 15 HP

Quantity-

Rate27829

Amount 27829

Above 15 HP and up to 20 HP

Quantity-

Rate32117

Amount 32117

Above 20 HP and up to 30 HP

Quantity-

Rate39375

Amount 39375

Supply & Fixing of ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980 including making connection etc.

Quantity-

Rate-

Amount -

3 core 4.0 Sq.mm

Quantity-

Rate189

Amount 189

3 core 6.0 Sq.mm

Quantity-

Rate283

Amount 283

3 core 10.0 Sq.mm

Quantity-

Rate484

Amount 484

3 core 16.0 Sq.mm

Quantity-

Rate722

Amount 722

Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size.

Quantity-

Rate-

Amount -

10.0 Sq.mm, 4 core

Quantity-

Rate196

Amount 196

16.0 Sq.mm, 4 core

Quantity-

Rate234

Amount 234

25.0 Sq.mm, 3.5 core

Quantity-

Rate324

Amount 324

35.0 Sq.mm, 3.5 core

Quantity-

Rate379

Amount 379

498 More

Evaluation Notes How It Works ?

Partners

Payment Type

Bank Certification Amount

Bank Guarantee Amount

Additional Info 1

Additional Info 2

Additional Info 3

Additional Info 4

Remarks

Potential Partner

Select Your Requirements

Help me get relevant partners for joint bidding

Help me get relevant material suppliers

Help me get project financing

Public Health Engineering Department Tender

Public Health Engineering Department - PHED Tender

Costs

EMD

Document Cost

Tender Fee

Description

Contact

Tender Id

Bid Award Id

Tender No

Tender Authority

Purchaser Address

Website

BOQ Items

Potential Partner

TENDER BY COUNTRIES

United States Tenders|

United Kingdom Tenders|

Spain Tenders|

France Tenders|

Qatar Tenders|

Australia Tenders|

Canada Tenders|

China Tenders|

Malaysia Tenders|

Maldives Tenders|

Singapore Tenders|

Bangladesh Tenders|

Ethiopia Tenders|

Bhutan Tenders|

Kuwait Tenders|

Oman Tenders|

Germany Tenders|

Egypt Tenders|

Ghana Tenders|

Saudi Arabia Tenders

TENDER BY AUTHORITIES

Federal Road Agency Tenders|

Bangladesh Railway Tenders|

Area Metropolitana De Barcelona Tenders|

Jsc Russian Railways Tenders|

Kuwait Oil Company Tenders|

Civil Aviation Authority Tenders|

Food And Agriculture Org. Tenders|

Eskom Tenders|

Energy Regulation Commision Tenders|

Dept Of Defence Tenders

TENDER BY CATEGORIES

Agriculture Or Forestry Works Tenders|

Automobiles And Auto Parts Tenders|

Civil And Construction Tenders|

Consultancy Services Tenders|

Education And Training Services Tenders|

Electrical And Electronics Tenders|

Finance And Insurance Sectors Tenders|

Food Products Tenders|

Furnitures And Fixtures Tenders|

Healthcare And Medicine Tenders

TENDER BY PROCUREMENT

Goods Tenders|

Works Tenders|

Services Tenders

OFG MANUFACTURING BUSINESSES PRIVATE LIMITED

Head Office

Sales Office

COMPANY

About Us

Contact Us

Download Media Kit

POLICIES

Terms of Use

Privacy Policy

SUPPORT

Request Demo

MOBILE APPS