Public Health Engineering Department Tender
... More
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 4,37,140Document Cost
₹ 5,000Tender Fee
₹ 1,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_PHCJO_260863_1Bid Award Id
ViewTender No
NIT No 259-275/2021-22Tender Authority
Public Health Engineering Department ViewPurchaser Address
-Website
http://https://phedwater.rajasthan.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
(2.4.3) Add 15% extra on above item for drilling depth beyond 100 mtr, If depth
of Tube well is more than 100 mtr.
160
-
1105.15
... More
(2.8) Testing verticality of tube well by plumbing system and yield test anddraw down test by pumping system as per IS : 2800 (Part - II) - 1979 asamended up to date.
2
-
7056
... More
(2.22) S&F M.S. Clamps set of 50x6mm flat from iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set.
4
-
600
... More
(2.19) Supply & Fixing of ISi marked three core PVC flat submersible cable asper IS 694: 1990 or amended up to date and conductor as per class 5 of IS8 130: 1980 includ ing making connection etc.
-
-
-
... More
(2.19.1) 3 core 4.0 mm2
500
-
163
... More
(2.2) Providing and Laying of ISI Marked PVC insulated and PVC sheathed cables of 1.1 KV grade with aluminum conductor of IS 1554 category II and approved make of including excavation of 30cmx75cm side trench as per IS 1255, 25cm thick under layer of sand II class brick covering, refilling earth in the remaining portion making necessary connection including testing etc. of required size 4 core (category 1) make as mentioned in specification.
-
-
-
... More
(2.20.2) 16 Sqmm, 4 core
200
-
202
... More
(2.24) Providing & Lowering in tubewell ISl marked GI Pipe "B" class as perIS: 1239 or amended up to date threaded and double flanged (welded) onboth ends and two number 25x3mm ms flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect.
-
-
-
... More
(2.24.2) 50 mm dia
240
-
597
... More
(2.11) Supply of ERW M.S. black casing pipe ISi marked (IS: 4270/2001) or
amended up to date of following sizes
-
-
-
... More
(2.11.2) 200 mm dia NB (Thickness of pipe 5.4mm & mass of tube 28.46 Kg/m)
120
-
2630
... More
(2.12) Labour charges for making slots on blank pipes made of ER W MS black pipe ISi marked of following sizes, the slotting should be as per IS:8110-2000 or as amended up to date.
-
-
-
... More
(2.12.3) 200 mm dia nominal bore.
36
-
273
... More
(T-15) Providing & fixing of ISI Marked GI Bend 90 degrees of following sizes including all jointing material “B” class.
-
-
-
... More
(T-15.1) 50 mm dia
6
-
300
... More
(2.32) Supplying & Installing 100 mm diameter sealed diaphragm bourdon typepressure gauge of range 0 to I 0 kg. including all jointing material as per specification with safety cover.
2
-
1100
... More
(2.3) Providing & Fixing of double flanged, Cl body, ISi marked NR V ofapproved make of following sizes
-
-
-
... More
(2.30.1) 65 mm dia
2
-
2160
... More
(2.23) Supply & Fixing tube well cover of MS sheet 8mm thick at top & Smmthick I OOmm wide shroud around the edge so as to form a cap on the topend of casing pipe with GI Nipple 45cm long & two GI flanges at bothend in 80mm sizes passing through a hole in the centre of MS sheet. A25mm socket with end plug shall also be welded over top plate (as perdrawillg enclosed). A GI nipple having outside thread of size 1/2" (for
installation pressure gauge) shall tie provided & welded with 80mm GInipple near top plate nipple shall be provided with end plug.
-
-
-
... More
(2.23.3) 200 mm dia
2
-
850
... More
(6.1) Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves straight and pocket less body passage of approved make of following Pressure rating & dia complete, confirfing to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date) ,Epoxy ( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel Insersion rubber of black EPDM 6mm thick . Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
(6.1.1) Manually Operated CI Sluice valve of Class PN-1.0
-
-
-
... More
(6.1.1.1) 80 mm HW
2
-
5432
... More
Construction & Commissioning of Reservoir (Rates are based on PHED SOR 2021)
-
-
-
... More
(3.2) Construction and commissioning of RCC INTZE type Over Head Service Reservoir of following capacity and staging as per the Scope of work and Technical specifications, consisting of the following main activities: -
-
-
-
... More
a) Topographic survey, preparation of site contour plan, conducting SBC test and its approval from department before construction. Submission and approval of concrete mix design and water quality test report for water to be used in construction. b) Excavation in all types of soil, PCC below foundation, all RCC Work, Plinth protection all around the structure including all material, labour, shuttering, scaffolding etc.
c) OHSR shall be provided with adequate plinth protection all around the structure in a width starting from edge of structure at GL and extending at least up to 1.0m beyond the edge of outer most projection of OHSR. The plinth protection shall consist of 150mm thick PCC in M-15 grade concrete laid over 150mm thick layer of compacted soil. d) Providing and applying two coats of food grade epoxy paint on the inside surface on the top dome, edge beam and 600 mm height of the vertical wall.
e) Conducting successfully hydro test and water tightness test as per I.S. code.
f) Providing and applying three coats of anti-carbonation paint on the top surface of the Top Dome.
g) Providing and applying three coats of cement-based paint on the external surface of the container, balcony, cone wall, columns & beams etc..
h) Providing and fixing SS-304 ventilator, SS 304 manhole frame and cover and SS-304 ladder from top dome/Slab to bottom dome/Slab inside container. i) Providing and fixing of MS section ladder from the last landing to balcony having railing all around it and MS ladder with safety cage from balcony to top dome/slab.
j) Providing and fixing water level indicator (float type).
-
-
-
... More
(3.2.1) Rates for RCC OHSR,SBC 7 T/sqm, SEISMIC ZONE-II & STAGING 18 M
-
-
-
... More
(3.2.1.2) 150 KL capacity
150000
-
21.76
... More
(3.7) Providing and fixing double flanged ISI marked DI Class K-9 pipes as per IS:8329-2000 (amended up to date), as vertical pipes for RCC Reservoirs including specials required such as duck foot bend, bend, tee etc. providing and fixing clamps at every 3 mtr, jointing materials such as nuts, bolt, rubber packing, hydraulic testing etc. complete in all respect up to and from valve chamber as per direction of EIC, Technical Specification and Scope of work.
-
-
-
... More
(3.7.1) 100 mm
20
-
1947
... More
(3.7.2) 150 mm
40
-
2801
... More
(3.7.3) 200 mm
20
-
3664
... More
(6.1) Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves straight and pocket less body passage of approved make of following Pressure rating & dia complete, confirfing to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date) ,Epoxy ( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel Insersion rubber of black EPDM 6mm thick . Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
(6.1.2) 100 mm HW
1
-
7456
... More
(6.1.4) 150 mm HW
2
-
11720
... More
(6.1.5) 200 mm HW
1
-
19485
... More
(3.3) Construction of RCC (Flat slab type) Clear Water Reservoir of following capacity as per the Scope of work and Technical specification, consisting of the following main activities: -
-
-
-
... More
a) Topographic survey, preparation of site contour plan, conducting SBC test and its approval from department before construction. Submission and approval of concrete mix design and water quality test report for water to be used in construction. b) Excavation in all types of soil, PCC below foundation & all RCC Work including all labour and material charges including providing and fixing of accessories such as SS ladder, SS manhole frame and covers, water level indicator (float type), SS ventilator with SS screen, float valve, puddle collars, G.I. pipe railing around walk way, Top Dome/Slab, Staircase.
c) CWR shall be provided with adequate plinth protection all around the structure in a width starting from edge of structure at GL and extending at least up to 1.0m beyond the vertical wall of CWR. The plinth protection shall consist of 150mm thick PCC in M-15 concrete over 150mm thick compacted soil fill.
d) Providing and applying two coats of food grade epoxy paint on the inside surface of the roof slab, and 600 mm height of the vertical wall. e) Successful hydro test and water tightness test as per I.S. code.
f) Providing and applying three coats of anti-carbonation paint on the roof Slab.
g) Providing and applying three coats of cement-based paint on the remaining external surface area of the structure.
-
-
-
... More
h) Providing and fixing SS-304 ventilator, SS 304 manhole frame and cover and SS 304 ladder from roof slab to bottom Slab, inside container. Providing and fixing water level indicator (Float type).
i) Providing and fixing MS ladder from ground to top slab. j) All MS parts to be painted with two coats of the enamelled paint over the primer coat of red oxide.
k) Providing and fixing of 150mm wide water bar for the construction joints in the container.
l) Providing and fixing CI/DI puddle collars the vertical wall for connecting inlet, outlet, overflow and washout pipes of the reservoir.
m) Inlet, outlet, overflow, washout pipes and valves are not included in this work, provision for the same shall be taken separately.
-
-
-
... More
(3.3.1) Rates for RCC Partially Underground type clear water reservoir SBC 7 T/sqm, SEISMIC ZONE-2,3 & 4
-
-
-
... More
(3.3.1.1) 50 KL capacity
50000
-
7.9
... More
(3.7) Providing and fixing double flanged ISI marked DI Class K-9 pipes as per IS:8329-2000 (amended up to date), as vertical pipes for RCC Reservoirs including specials required such as duck foot bend, bend, tee etc. providing and fixing clamps at every 3 mtr, jointing materials such as nuts, bolt, rubber packing, hydraulic testing etc. complete in all respect up to and from valve chamber as per direction of EIC, Technical Specification and Scope of work.
-
-
-
... More
(3.7.1) 100 mm
5
-
1947
... More
(3.7.2) 150 mm
5
-
2801
... More
Providing, laying and jointing of Rising main (Rates are based on PHED SOR 2021)
-
-
-
... More
(SOR PIPE LINE 2021/1.1) Providing, lowering, laying in trenches, aligning, fixing in positionand jointing Ductile Iron (DI) ISi marked K-7 grade S&S pipesas per 15:8329-2000 (amended upto date), with internal cement
mortar lining suitable for potable water with rubber ring (EPDM)joints as per IS: 5382- 1985 including all taxes (Central and local),transportation and freight charges, inspection charges, loading/unloading charges, including cost of labour and material, specials(Tee, bend etc.) satisfactory hydraulic testing, disinfection etc.complete as per technical specifications and direction of Engineer- incharge. (excluding earth work)Note : Providing and fixing of all requisite specials as per drawing,design and layout are inclusive in RM measurement of the item andshall not be paid separately.
-
-
-
... More
(1.1.1) 80 mm
600
-
1214
... More
(1.1.2) 100mm
3600
-
1262
... More
(1.1.3) 150 mm
230
-
1795
... More
(1.4) Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) .
Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.
Supply may be in coil or straight length in 6 M/12 M.
-
-
-
... More
(1.4.3) HDPE PE-80 PN-10
-
-
-
... More
(1.4.3.1) 90 mm dia
1200
-
387
... More
(1.4.3.2) 110 mm dia
-
-
-
... More
(1.5.3.1) 125 mm dia
-
-
-
... More
(4.1) Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.:
All kinds of soil
1602.45
-
172
... More
(4.3) Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and stacking serviceable material for measurements and disposal of unserviceable material as directed, with in a lead of 50 Mtr. including all safety provisions required .:
-
-
-
... More
(4.3.1) Ordinary rock
793.47
-
322
... More
(4.3.2) Hard rock (requiring blasting)
224.49
-
475
... More
(4.3.3) Hard rock(blasting prohibited)
224.49
-
674
... More
(11.1) SITC of D/F Full bore type Electromagnetic Flow Meter of approved make of following dia and specifications complete: Media : Water (Raw/ Chlorinated) , Pressure : up to 1.5MPa, Process temp: - 50 deg C, Flow/Meter Tube : SS 304, Electrode : SS AISI 316L / Hastelloy C276/ Tantalum, Lining Material : Hard Rubber/ Neoprene / Poly-urethane (PU)
, Flange : SS / CS, Flange Standard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Cast Aluminium, with anticorrosive paint & provide completely sealed (leak proof) construction as per requirement of IEC 60529, Accuracy : ± 0.5 % M.V.- velocity 0.3 to 10 m/s, Transmitter/ signal convertor Enclosure : Die Cast Aluminium, Power Supply : 80-240 V AC - 50Hz, Output 1 : 4-20 mA, Output 2: Pulse, Communication Output : RS 485/ Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parameters and totalizer value during power failure, Protection category- IP 68 for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, if required, and all materials required for making connection with existing pipeline including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In-Charge.
Note: Rates are exclusive of tail piece / dismantling joints and earth work.
-
-
-
... More
(40546) EFM100 mm
1
-
101884
... More
(1.3) Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths DI standard specials with rubber ring (EPDM)/ nut bolt and insertion sheet and jointing as per IS: 9523-2000 or as amended up to date, such as tees, bends, tapers, caps etc. within trenches in DI pipe line complete including all material, labour, taxes, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge (excluding earth work).
-
-
-
... More
(1.3.1) A/S Tee, Bend, Reducer(All End Socketed)
-
-
-
... More
(1.3.1.1) Upto 300 mm Diameter
400
-
139
... More
(6.5) Providing, lowering, aligning, fixing in position and Jointing in pipe line, CI single Air Valve Flanged/ Screwed type of approved makes for following pressure rating & dia complete, confirming to IS: 14845-2000 (amended upto date) and of following specifications: Body , Cover and Cowl - Grey Cast Iron as per IS:210- FG 200 ,Float - Stainless Steel AISI 304 / IS: 3444 ,Float Guide- HBT1,Body seat ring - Leaded tin bronze/ SS , Seal ring and face ring - EPDM/NBR, Ends flanged according to IS 6418 or screwed Screwed type shall have extcrnal pipe threads conforming to IS 554 Fastners - CS Epoxy paint inside outside of food grade safe for drinking water ,Valves including all mateial, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.
Note: Rates are exclusive of connecting tee, pipe piece and earth work.
-
-
-
... More
(6.5.1) Class PN 1.0
-
-
-
... More
(6.5.1.2) 25 mm S-1 Type
2
-
2711
... More
(6.1) Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves straight and pocket less body passage of approved make of following Pressure rating & dia complete, confirfing to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date) ,Epoxy ( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel Insersion rubber of black EPDM 6mm thick . Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
(6.1.1) Manually Operated CI Sluice valve of Class PN-1.0
-
-
-
... More
(6.1.1.1) 80 mm HW
2
-
5432
... More
(6.1.1.2) 100 mm HW
4
-
7456
... More
(6.1.1.4) 150 mm HW
2
-
11720
... More
(4.5) Dismantling of cement concrete pavement for pipe line line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work.
20
-
653
... More
(4.6) Dismantling of flexible pavement for pipe line line and chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work.
-
-
-
... More
(4.6.1) Bituminous courses
2
-
362
... More
(4.7) Providing and laying in position cement concrete M10 grade nominal mix 1:3:6 (1 Cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work.
10
-
4033
... More
(4.8) Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work.
-
-
-
... More
(4.8.1) M20 grade Nominal Mix
1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).
10
-
5312
... More
(4.9) Removing & Re-fixing of Precast concrete interlocking blocks by manual, stacking of serviciable & non serviceable material separately. disposal of dismantled material lead up to 50 mtr. The C.C. interlocking paving blocks be laid on average 25 mm thick bed of coarse sand and the joints to be filled with fine sand. Laying procedure on compacted sub base as defined. Complete job is to be executed as per the directions of Engineer in charge. The rates to be inclusive of fixing of minimum 70 percent reusable precast concrete interlocking block and cost of required new precast concrete interlocking block against damaged, including all lead and lift as per Technical specifications. (Interlocking block manufactured by fully computerized automatic stationery hydraulic vibro pressed machine & full computerized automatic batching plant of class A-1 as per BS:6717-2001. Tensile splitting strength and breaking load as per BS: 6717-2001 Colour: Grey cement natural colour. Variation in Dimension : Less than 1.6 mm Variation in thickness: Less than 3.2 mm)
-
-
-
... More
(4.9.2) 80 mm thick.
230
-
268
... More
Procurement, Laying and jointing & testing of Distribution Pipeline (Rates are based on PHED SOR 2021)
-
-
-
... More
(SOR PIPE LINE 2021/1.1) Providing, lowering, laying in trenches, aligning, fixing in positionand jointing Ductile Iron (DI) ISi marked K-7 grade S&S pipesas per 15:8329-2000 (amended upto date), with internal cement
mortar lining suitable for potable water with rubber ring (EPDM)joints as per IS: 5382- 1985 including all taxes (Central and local),transportation and freight charges, inspection charges, loading/unloading charges, including cost of labour and material, specials(Tee, bend etc.) satisfactory hydraulic testing, disinfection etc.complete as per technical specifications and direction of Engineer- incharge. (excluding earth work)Note : Providing and fixing of all requisite specials as per drawing,design and layout are inclusive in RM measurement of the item andshall not be paid separately.
-
-
-
... More
(1.1.1) 80 mm
-
-
-
... More
(1.1.2) 100MM DIA
1270
-
1262
... More
(1.1.3) 150MM DIA
1070
-
1795
... More
(1.4) HDPE PIPES
Providing, lowering, laying and jointing in trenches. standard lengths HDPE ISi marked Pipes as per IS-4984: l 995 (amendedupto date) with necessary jointing material like mechanicalconnectors, i.e. thread/ insert joint/ quick release coupler joint/compression fitting joint or flanged joint and specials jointing pipeby butt fusion/ electro fusion welding method, including all taxes ,transportation and freight charges, inspection charges, loading/unloading charges, stacking of pipes, including cost of labour andmaterial, specials (Tee, bend etc.), satisfactory hydraulic testing,disinfection etc. complete as per technical specifications and di rection of Engineer-in-charge of following class and diameter.(excluding earth work)Note : Providing and fixing of all requisite specials as per drawing,design and layout are inclusive in RM measurement of the item andshall not be paid. separately.Supply upto 110 mm dia. in coil & above 110 mm dia straight lengthin6M.
-
-
-
... More
(1.4.1.1) HDPE PE-80 PN-6 75mm dia.
970
-
187
... More
(1.4.1.2) HDPE PE-80 PN-6 90 mm dia.
1600
-
264
... More
(1.4.1.3) HDPE PE-80 PN-6 110 mm dia.
-
-
-
... More
(1.5.1.1) HDPE PE-80 PN-6 125 mm dia.
-
-
-
... More
(1.5.1.2) HDPE PE-80 PN-6 140 mm dia.
-
-
-
... More
(4.1) Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.:
All kinds of soil
1682.55
-
172
... More
(4.3) Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and stacking serviceable material for measurements and disposal of unserviceable material as directed, with in a lead of 50 Mtr. including all safety provisions required .:
-
-
-
... More
(4.3.1) Ordinary rock
649.73
-
322
... More
(4.3.2) Hard rock (requiring blasting)
-
-
-
... More
(4.3.3) Hard rock(blasting prohibited)
261.82
-
674
... More
(11.3) SITC of Bulk Flow Meter with removable mechanism class "B" confirming to ISO:4064:2005/ IS: 2373 of approved make of following dia sized pipelines and specifications complete: Media : Water (Clear ), Temp. 50 deg., Pr. rating: PN16, Protection type: IP- 68, Body Material : IS-210 Gr. FG-200, Accuracy Class :Class B (±2 % @ Nominal flow rate), Magnetic Drive, Dry Dial, Epoxy powder coated, Pulse out put option, Anti-magnetic protection including all materials and making connection with existing pipeline required for Bulk Flow Meter including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In-Charge.
Note: Rates are exclusive of tail piece / dismantling joints and earth work.
-
-
-
... More
(40604) BFM 100 mm
1
-
13359
... More
(40606) BFM 150 mm
1
-
20709
... More
(1.3) Providing, lowering, laying, aligning, fixing in position and jointing at all level/depth S&S standard special with rubber ring(EPDM) joints as per SI:5282-1985 such as tees, bends, tapers, caps etc. within trenches in DI pipe line complete including all material, labour testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in- charges :
-
-
-
... More
(1.3.1) A/S Tee, Bend, Reducer(All End Socketed)
-
-
-
... More
(1.3.1.1) Upto 300 mm Diameter
500
-
139
... More
(6.1) Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves straight and pocket less body passage of approved make of following Pressure rating & dia complete, confirfing to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date) ,Epoxy ( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel Insersion rubber of black EPDM 6mm thick . Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
(6.1.1) Manually Operated CI Sluice valve of Class PN-1.0
-
-
-
... More
(6.1.1.1) 80 mm HW
14
-
5432
... More
(6.1.1.2) 100 mm HW
10
-
7456
... More
(6.1.1.4) 150 mm HW
6
-
11720
... More
(4.5) Dismantling of cement concrete pavement for pipe line line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work.
265
-
653
... More
(4.6) Dismantling of flexible pavement for pipe line line and chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work.
-
-
-
... More
(4.6.1) Bituminous courses
10
-
362
... More
(4.7) Providing and laying in position cement concrete M10 grade nominal mix 1:3:6 (1 Cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work.
132.5
-
4033
... More
(4.8) Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work.
-
-
-
... More
(4.8.1) M20 grade Nominal Mix
1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).
132.5
-
5312
... More
(4.9) Removing & Re-fixing of Precast concrete interlocking blocks by manual, stacking of serviciable & non serviceable material separately. disposal of dismantled material lead up to 50 mtr. The C.C. interlocking paving blocks be laid on average 25 mm thick bed of coarse sand and the joints to be filled with fine sand. Laying procedure on compacted sub base as defined. Complete job is to be executed as per the directions of Engineer in charge. The rates to be inclusive of fixing of minimum 70 percent reusable precast concrete interlocking block and cost of required new precast concrete interlocking block against damaged, including all lead and lift as per Technical specifications. (Interlocking block manufactured by fully computerized automatic stationery hydraulic vibro pressed machine & full computerized automatic batching plant of class A-1 as per BS:6717-2001. Tensile splitting strength and breaking load as per BS: 6717-2001 Colour: Grey cement natural colour. Variation in Dimension : Less than 1.6 mm Variation in thickness: Less than 3.2 mm)
-
-
-
... More
(4.9.2) 80 mm thick.
655
-
268
... More
Pumping Machinery (Rates are based on PHED SOR 2021)
-
-
-
... More
(PHED SOR 2020/5.1) Providing, installation, testing and commissioning of Centrifugal Monoblock pump set conforming to IS 9079 operating at sync. speed 2900 RPM with requisite MOC impeller, priming funnel, cock, suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply. Motor shall be TEFC type and Pump set shall be suitable for working at various discharge and head requirements as per scope of work. Pump shall be erected on C.C. foundation / cross channels / RSJ frame block with suitable foundation bolts grouted in C.C. foundation block etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions mentioned in TD.
-
-
-
... More
(5.1.2) Centrifugal Monoblock Pump set (Double Stage)
-
-
-
... More
(5.1.2.3) 7.5 KW (10.0 HP)
2
-
63370
... More
(7.2) SITC STAR DELTA Starter type LT Panel of following rating: all switchgears are of PHED approved makes, CRCA sheet of Panel enclosure is of TATA/ Essar 1.6mm/ 2.0mm thick duly Electrostatic Powder Coated with angle frame including other ancillaries ( Insulators, Acrylic Sheet , Baklight Sheet, Hardware, Wire, Name Plates, Lugs, Pvc Channel , Mcb Chanel , Lock, Hing , Bidding , Connectors, Netural Links , Sprial , Saddle & Packing Material ) etc. and 100A/ 125A ,TPN, Aluminum Bus Bar with Colour coated heat shrinkage sleeves complete as per Technical Specifications and as per direction of Engineer-In-Charge.
-
-
-
... More
(7.1.3) STAR DELTA STARTER 7.5 KW (10.0 HP) - : For 2 motors (1 W+ 1S) I/C - MCB 63A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 60/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and O/G- MCB 32A ,TP, 10 KA, C Curve (2), Power Cont 18A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (7-10A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Priventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 5Kvar (2), S/D Timer(2)
2
-
58735
... More
(6.17) Providing, lowering, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning and as per technical specifications and direction of Engineer In-Charge. Class PN 1.0/1.6
-
-
-
... More
(6.17.2) 100 mm dia.
2
-
3160
... More
(6.17.4) 150 mm dia.
2
-
4964
... More
(2.15) Supply & Installation of 3 phase ISi marked submersible motor pumpset of five star rating by BEE and as per JS: 8034-2011 (pump) and IS9283-2013 (motor) or amended up to date of approved make of followingduty condition with required accessories including making connectionsuitable for tube well/DCB. The job includes lowering of motor pump,
installation of complete fitting & accessories, jointing of electrical cablesup to switch board, testing of submersible pump set and interconnectionup to water mains, complete in all respect.
-
-
-
... More
(2.15.1) Up to 5.5 KW (7.5 HP) & head up to 120 mtr.
16.79
-
7830
... More
(2.18) Supply and Fixing of electric control feeder panel comprising of suitablerating MCCB , fully automatic star-delta starter, over load relay, amperemeter with CTs, volt meter, phase preventor, suitable starting capacitorsphase indicators, lighting arrangement etc complete suitable for threephase pump set. The panel should have space for energy meter (supplied
by DISCOM). All these equipments shall be housed by panel box madeout from 18 guage M.S. Sheet with powder coating. Panel should be ofminimum size 900 x 600 x 450 mm with Stand ( made of angle iron ofsize 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs,each leg's length 18" and double door including in built locking system.The legs should be embedded in M-15 cement concrete plat form.The size
of CC plateform should be equal or bigger than the base size of panelhaving height of at least 200 mm from ground level. The panel shouldhave opening of suitable size in front of space for energy meter with glassfor meter reading. The operation of panel should be suitable for on 440Volt AC Supply.
-
-
-
... More
(2.18.1) Above 5 HP and up to 10 HP
3
-
20924.9
... More
(1.2) providing,lowering,laying,aligning,fixing,in positionlevel/depthCI class B special as per IS :1538amendment up to date in trences complete including all material,labour,testing and commissioning along with pipeline appuratences as per Technical specification and as per direction of Engineer. Note: E/W to be measured and paid separately.
-
-
-
... More
(1.20.2) Double Flanged CI pipe fittings.
-
-
-
... More
(1.20.2.1) Up to 300 mm dia
500
-
110
... More
(2.2) Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size.
-
-
-
... More
(2.20.1) 10.0 Sq.mm, 4 core
-
-
-
... More
(2.20.2) 16.0 Sq.mm, 4 core
100
-
202
... More
(2.19) Supply & Fixing of ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980 including making connection etc.
-
-
-
... More
(2.19.1) 3 core 4.0 Sq.mm
-
-
-
... More
(2.19.2) 3 core 6.0 Sq.mm
-
-
-
... More
(2.21) Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required.
2
-
3150
... More
(2.32) Supplying & Installing 100 mm diameter sealed diaphragm bourdon type pressure gauge of range 0 to 10 kg. including all jointing material as per
specification with safety cover.
2
-
1100
... More
(6.4) Providing, lowering, aligning, fixing in position in pipe line, CI double flanged Dual plate check valve of approved make of following Pressure rating & dia complete, as per API: 594/ API: 598 and of following specifications: Body & Cover of Grey cast iron of IS:210/ FG200 , Disc / plates - Cast steel ,Disc seal ring of EPDM/ NBR (food grade quality), Body seat of SS ,Face to face dimensions as per API: 594, Flanges Drilled as per IS:1538. All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan conforming toType B of IS:341or paint conforming to IS:9862 or IS:2932( Non-Toxic- suitable for drinking water) applied inside and outside. Shaft/Stop Pin of SS- AISI- 304/410 , Hinge SS AISI 316/304 / CS ,Spring SS AISI 316/304 , Bonnet Gasket EPDM, Bush- Brass with EPDM/NBR "O "ring seal.Nut-Bolt confirming to IS:1363 and IS: 1367 (galvanised steel) ,Insersion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
(6.4.1) Class PN 1.0
-
-
-
... More
(6.4.1.2) 100 mm dia
2
-
6633
... More
Civil Work (Rates are based on PHED SOR 2021)
-
-
-
... More
(8.1) Construction of Pump house of required size suitable for installation of maximum 4 no. monoblock pump sets as per approved GA drawing, scope of work and technical specification complete work in all respect including electrical works for lighting and fans, rain water drainage. The plinth area of pump house shall be area of measurement.
24
-
17485
... More
(8.2) Construction of boundary wall of Brick/ stone masonary as per enclosed GA drawing, scope of work and technical specifications complete work in all respect. Brief details of boundary wall parameter is as below:
1. Depth of foundation- 900 mm.
2. PCC in M-10, width -900 mm and thickness 100 mm,
3. Section of foundation above PCC W-600 mm, D-450mm, W- 450mm, D-450 mm.
4. Superstructure work: Stone masonary W-300, height-1650 mm,/ Brick work W-230 mm, height- 1650 mm.
5. Cement mortar pointing on Stone masonary and cement mortar plaster 20 mm thick on brick masonary in CM 1:6.
6. Expansion joint shall be on every 30 mtr.
7. On top of wall there shall be CC Coping 75 mm thick (1:2:4) shall be provided.
8. Pillar for main gate 350x350 mm in size is part of boundary wall.
9. Cement paint of approved colour in 3 coat shall be done.
120
-
5017
... More
(8.3) Providing and fixing steel, gate, grating and grills made of angles, tees, square bars, flats or black pipe with hold fast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide and two coat of enamel paints.
290
-
104
... More
House Hold connection (Rates are based on PHED SOR 2021)
-
-
-
... More
(1.21) Providing Household Tap Connection as per technical specification and approved drawing as per relevant IS code (amended up to date) from uPVC/DI/AC/MS/GI pipe line up to consumer meter/premises by using PVC/MS saddle piece (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil (excluding road); depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including MS/PVC saddle piece, gunmetal ferrule 4.0 mm , GM Full-way Valve (IS:778 Mark) or wheel valve and specials with 20 mm nominal dia MDPE pipe PE 80 PN 16 as per ISO 4427 / 20 mm nominal dia PPR-C (Three layered) pipe PN16 SDR 7.4 (IS:15801:2008) (ISI mark) and above ground level using PPR-C pipe with standard PPR fittings/ GI pipe in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . The service line should be laid at least 45 cm below ground level.
Note: Road cut and restoration is not part of this item and paid seperately.
-
-
-
... More
(1.21.1) For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr.
20
-
1429
... More
(1.22) Providing Household Tap Connection as per technical specification and approved drawing as per relevant IS code (amended up to date) from HDPE pipe line up to consumer meter/premises by using electro fusion saddle piece (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including electrofusion saddle piece, gunmetal ferrule 4.0 mm , GM Full-way Valve (IS:778 Mark) or wheel valve valve and specials with 20 mm nominal dia MDPE pipe PE 80 PN 16 as per ISO 4427 / 20 mm nominal dia PPR-C (Three layered) pipe PN16 SDR 7.4 (IS:15801:2008) (ISI mark) and above ground level using PPR-C pipe with standard PPR fittings/ GI pipes in the premises for fixing a tap / meterbox (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . The service line should be laid at least 45 cm below ground level.
Note: Road cut and restoration is not part of this item and paid seperately.
-
-
-
... More
(1.22.1) For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr.
480
-
1786
... More
(1.23) P& F Bib cock (IS : 8931 mark), superior quality of approved make , brss 400 gm, 15 mm nominal bore.
500
-
271
... More
(1.25) Road cutting for house hold service connection in minimum trench width whereever road crossing is required. Road cutting of cement concrete,WBM, Black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with Cement concrete with PCC M-10 and CC M-30 grade as per specification and direction of Engineer in charge..
1000
-
172
... More
(1.26) Add extra over item no 1.21 & 1.22 for providing 20 mm PE 80 PN 16 as per ISO 4427 MDPE pipe including excavation, providing, laying & jointing of service line above 5.00 mtr.
1000
-
40
... More
(9.3) Data entry of existing FHTCs in rural area under JJM on website ejalshakti.gov.in; work includes visiting the village for collecting basic data consumers like i.e. Aadhar no./ration card/voter ID/BPL card/ PAN card/driving licence/passport/Antyodaya card/mobile no. etc. and entering the details on the above website. The cost also includes computer and operator.
500
-
30
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements