Public Health Engineering Department Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Public Health Engineering Department - PHED Tender
Civil Works Others
Eprocure
Opening Date17 Dec 2024
Closing Date23 Jan 2025
Tender Amount₹ 6,46,96,00,000
Costs
EMD
₹ 12,93,92,000Document Cost
₹ 50,000Tender Fee
₹ 2,500
Summary
Work Of Complete Wss From Sadas Rajgarh Ips Cwrm Ps And Ohsr Cluster Vd Mains Fhtc Of Blocks Gangrar 2 Villages Chittorgarh 212 Villages Nimbahera 66 Villages Bhadesar 45
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PHCJ_437589_1Tender No
ACEP-NIT-07/2024-25Tender Authority
Public Health Engineering Department ViewPurchaser Address
-Website
http://eproc.rajasthan.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
200 mm dia
19693
2618
51556274
... More
250 mm dia
2750
3458
9509500
... More
350 mm dia
12645
5342
67549590
... More
Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended upto date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in- charge.(excluding earth work)
Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.
-
-
-
... More
100 mm dia
1544466
1262
1949116092
... More
150 mm dia
253668
1795
455334060
... More
200 mm dia
100663
2202
221659926
... More
250 mm dia
27137
2851
77367587
... More
300 mm dia
34920
3639
127073880
... More
350 mm dia
19974
4431
88504794
... More
400 mm dia
10113
5404
54650652
... More
450 mm dia
7323
6378
46706094
... More
700 mm dia
29362
13400
393450800
... More
Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work). Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.
Supply of pipe shall be in straight length in 6/12 M.
-
-
-
... More
HDPE PE-100 PN-6
-
-
-
... More
75 mm dia
811230.3
160
129796848
... More
90 mm dia
68958.9
228
15722629.2
... More
110 mm dia
60332.5
381
22986682.5
... More
Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by butt fusion/ electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and
direction of Engineer-in-charge of following class and diameter. (excluding earth work). Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.
Supply of pipe shall be in straight length in 6/12 M.
-
-
-
... More
HDPE PE-100 PN-6
-
-
-
... More
125 mm dia
65538.3
494
32375920.2
... More
140 mm dia
32572.8
615
20032272
... More
160 mm dia
31051.7
773
24002964.1
... More
180 mm dia
32323.8
970
31354086
... More
200 mm dia
6088.7
1162
7075069.4
... More
225 mm dia
18187
1463
26607581
... More
Providing and fixing double flanged ISI marked DI Class K-9 pipes as per IS:8329-2000 (amended up to date), as vertical pipes for RCC Reservoirs including specials required such as duck foot bend, bend, tee etc. providing and fixing clamps at every 3 mtr, jointing materials such as nuts, bolt, rubber packing, hydraulic testing etc. complete in all respect up to and from valve chamber as per direction of EIC, Technical Specification and Scope of work.
Note: The rates for DI double flanged pipes shall be reduced 5%, if used other than OHSR pipes.
-
-
-
... More
100 mm
301
1849
556744.65
... More
150 mm
145
2660
385837.75
... More
200 mm
127
3480
442061.6
... More
250 mm
54
4694
253524.6
... More
300 mm
34
5989
203651.5
... More
350 mm
28
7228
202399.4
... More
400 mm
46
8786
404181.3
... More
450 mm
20
10389
207784
... More
500 mm
5
12209
61047
... More
600 mm
10
16213
162136.5
... More
700 mm
13
20917
271922.3
... More
Providing and fixing double flanged ISI marked DI Class K-9 pipes as per IS:8329-2000 (amended up to date), as vertical pipes for RCC Reservoirs including specials required such as duck foot bend, bend, tee etc. providing clamps at every 3 mtr, jointing materials such as nuts, bolt, rubber packing, hydraulic testing etc. complete in all respect up to and from valve chamber as per direction of EIC, Technical Specification and Scope of work.
-
-
-
... More
100 mm dia
2415.2
1947
4702394.4
... More
150 mm dia
1168.8
2801
3273808.8
... More
200 mm dia
841.1
3664
3081790.4
... More
250 mm dia
358.6
4942
1772201.2
... More
Manufacturing, supplying ,lowering, laying and jointing in position to correct line spirally welded SAW/Fabricated MS Pipe having bevelled end plates / coils, confirming to IS 3589-2001 or its latest revision/ amendments, for following thickness and inside diameter, including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.), field joints, satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge; (excluding earthwork, internal lining and outer coating). Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.
For Pump & ESR Piping
-
-
-
... More
100 mm dia 4.0 mm thick
342
1252
428184
... More
150 mm dia 4.0 mm thick
118
1853
218654
... More
200 mm dia 4.0 mm thick
40
2455
98200
... More
100 mm dia 6.0 mm thick
321
1913
614073
... More
150 mm dia 6.0 mm thick
261
2816
734976
... More
200 mm dia 6.0 mm thick
77
3719
286363
... More
250 mm dia 6.0 mm thick
63
4621
291123
... More
300 mm dia 6.0 mm thick
6
3960
23760
... More
350 mm dia 6.0 mm thick
49
5546
271754
... More
400 mm dia 6.0 mm thick
30
6325
189750
... More
500 mm dia 6.0 mm thick
30
7883
236490
... More
700 mm dia 6.0 mm thick
15
10999
164985
... More
800 mm dia 6.0 mm thick
4
12557
50228
... More
900 mm dia 6.0 mm thick
4
14115
56460
... More
800 mm dia 8.0 mm thick
25
16785
419625
... More
900 mm
8
18862
150896
... More
1200 mm
20
25094
501880
... More
1300 mm
10
27172
271720
... More
Supply laying and pushing of MS casing pipe of specified thickness approved by concerned department authority by trenchless method adopting any suitable technology below ground at required depth under running traffic condition as per Highway/ Railway standard including carrying out survey work at the job site for determining underground cable trenches like telephone, cable, water & sanitary lines and resistivity test for finding the soil strata using necessary equipments for completion of works, mobilizing of machineries and specialized crew at the job site complete in all respect, including excavation of driven pit and exit pit (up to 3 meter depth) with proper protection at these sites with shoring sheets and ISMB. Providing MS cutting edges for front shield and constructing thrust bed at designated level. Necessary dewatering and providing concrete foundation at the base of the driven pit, PVC/Rubber saddle as per the requirement of Highway/Railway authority, crane for handing of pipe and any other machinery, tools, and tackles required, construction of temporary works as per design, drawing and method as per approved by authority specification and the direction of the Engineer.
Apply corrosion, resistant, protection on inside and outside of casing pipe as per technical specification.
-
-
-
... More
300 mm Dia 8 mm thick casing pipe with protective coating.
2112.1
16737
35350217.7
... More
400 mm Dia 8 mm thick casing pipe with protective coating.
495
19914
9857430
... More
500 mm Dia 8 mm thick casing pipe with protective coating.
37.4
20749
776012.6
... More
800 mm dia RCC pipe
26
22800
592800
... More
Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.
-
-
-
... More
In all types of Soils
-
-
-
... More
upto 1.5 m
543766.15
172
93527777.15
... More
Above 1.5 mtr and up to 3.0 mtr.
2906.84
189
549392.76
... More
In Soft Rock
-
-
-
... More
upto 1.5 m
558756.46
322
179919580.67
... More
Above 1.5 mtr and up to 3.0 mtr.
2260.87
354
800347.98
... More
In Hard Rock (Blasting Required)
-
-
-
... More
upto 1.5 m
103842.44
475
49325159
... More
Above 1.5 mtr and up to 3.0 mtr.
968.95
507
491257.65
... More
In Hard Rock (Blasting Probihited)
-
-
-
... More
upto 1.5 m
197294.96
674
132976803.04
... More
Providing, lowering, aligning, fixing in position and Jointing in pipe line, DI Body Flanged End Tamper proof Kinetic Air Valve of approved makes of following pressure rating and dia and as per following specifications: Governing standard - AWWA C512/ IS:14845:2000(amended up to date) Body, High pressure cover , Low pressure cover, Cowl and Joint support ring - Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865, FloatLP ball & HP ball : AISI 304 stainless Steel, Seat ring & Gasket - EPDM/NBR ,HP Orifice & HP orifice plug : Bronze/ SS ,Bush: Bronze ,Flanges as per IS/ BS, Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body & cover inside and outside .Fasteners - CS/ Galvanised steel, Outlet of big orifice will have a screen to prevent Tamper of float, with DI metal seated D/F Non rising stem. Sluice Valves as per (IS: 14846 amended upto date) PN 1.6 ratings. Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.
Note: Rates are exclusive of connecting tee, pipe piece and earth work
-
-
-
... More
Class PN 1.6
-
-
-
... More
40 mm dia
125
11225
1403125
... More
50 mm dia
721
11637
8390277
... More
80 mm dia
91
14859
1352169
... More
100 mm dia
31
20215
626665
... More
Construction of RCC pillar for following size of air valves including earthwork excavation, RCC M25 grade for base slab, vertical pillar, including cost of steel reinforcement ,GI (class-B)/MS vertical pipe, form work, proper curing of concrete work complete in all respect as per standard specifications and drawings and as directed by Engineer.
-
-
-
... More
Air valve pillar for air valves size upto 80mm dia
937
17460
16360020
... More
Air valve pillar for air valves size of 100mm dia
31
18842
584102
... More
Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS (AISI 316 or equivalent) Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge.
Manually Operated Resilient Seated Sluice Valves of Class PN 1.6
-
-
-
... More
80 mm dia
425
7877
3347725
... More
100 mm dia
1430
9960
14242800
... More
125 mm dia
121
14730
1782330
... More
150 mm dia
469
16473
7725837
... More
200 mm dia
192
25341
4865472
... More
250 mm dia
59
42053
2481127
... More
300 mm dia
22
53559
1178298
... More
350 mm dia
7
100494
703458
... More
400 mm dia
2
131616
263232
... More
700 mm dia
2
618247
1236494
... More
900 mm dia
2
1207226
2414452
... More
Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN- 1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG- 400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date)
/Din 3202 F4, Stem/ spindle of SS (AISI 316 or equivalent) Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
Motorized Sluice Valves with Electric Actuator and integral starter of Class PN 1.6 On Individual Delivery Pipe
-
-
-
... More
100 mm dia
30
107537
3226110
... More
150 mm dia
22
120432
2649504
... More
200 mm dia
6
133923
803538
... More
250 mm dia
5
153176
765880
... More
Providing, lowering, laying, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning Technical Specifications and as per direction of Engineer. Class PN 1.0
-
-
-
... More
80 mm dia
421
2715
1143015
... More
100 mm dia
1204
3160
3804640
... More
125 mm dia
119
4131
491589
... More
150 mm dia
353
4964
1752292
... More
200 mm dia
148
7383
1092684
... More
250 mm dia
41
10111
414551
... More
300 mm dia
14
12218
171052
... More
350 mm dia
15
15730
235950
... More
400 mm dia
8
21306
170448
... More
450 mm dia
3
24790
74370
... More
Providing, lowering, laying, aligning, fixing in position and jointing MS dismantling joint (Fabricated Steel) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning Technical Specifications and as per direction of Engineer.
-
-
-
... More
80 mm dia
4
3650
14600
... More
100 mm dia
205
4423
906715
... More
125 mm dia
2
5861
11722
... More
150 mm dia
113
8262
933606
... More
200 mm dia
36
10186
366696
... More
250 mm dia
15
13201
198015
... More
300 mm dia
3
16484
49452
... More
350 mm dia
6
23102
138612
... More
400 mm dia
2
30866
61732
... More
500 mm dia
2
44084
88168
... More
700 mm dia
14
79966
1119524
... More
800 mm dia
4
103054
412216
... More
900 mm dia
2
140920
281840
... More
1200 mm dia
1
224940
224940
... More
Providing, lowering, aligning, fixing in position in pipe line, DI D/F resilient seated (soft seated) short body pattern type double eccentric Butterfly valves of approved make of following class & dia complete confirming to BS EN 593/ BS 5155/ IS 13095/1991 amended up to date and of following specifications: Body, disc and end cover of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Face to face dimensions as per DIN 3202 F4/ IS 13095 Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on both body and disc inside and outside. Disc seal ring of EPDM/ Neoprene (food grade quality) and disc seal retaining ring of SS/CS. Shaft of SS- AISI- 304/316 & shaft bearings- bronze/ PTET or Teflon with EPDM/NBR "O "ring seal, Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvenised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
350 mm dia
18
80641
1451538
... More
400 mm dia
14
106327
1488578
... More
450 mm dia
5
134992
674960
... More
500 mm dia
3
169183
507549
... More
600 mm dia
1
210140
210140
... More
700 mm dia
14
287912
4030768
... More
800 mm dia
3
383437
1150311
... More
900 mm dia
1
496687
496687
... More
1200 mm dia
2
1038272
2076544
... More
1300 mm dia
1
1644837
1644837
... More
Providing, lowering, aligning, fixing in position in pipe line, DI D/F resilient seated (soft seated) short body pattern type double eccentric Butterfly valves of approved make of following class & dia complete confirming to BS EN 593/ BS 5155/ IS 13095/1991 amended up to date and of following specifications: Body, disc and end cover of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Face to face dimensions as per DIN 3202 F4/ IS 13095 Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on both body and disc inside and outside. Disc seal ring of EPDM/ Neoprene (food grade quality) and disc seal retaining ring of SS/CS. Shaft of SS- AISI- 304/316 & shaft bearings- bronze/ PTET or Teflon with EPDM/NBR "O "ring seal, Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvenised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. At Individual Delivery pipe
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
Class PN 1.6, Motorised Operated
-
-
-
... More
800 mm dia
4
533324
2133296
... More
Construction of RCC Scour valve chamber dry type for different type of valves including earthwork excavation, 100mm PCC M15 as leveling course, RCC M25 grade for base slab, side wall & cover slab , including cost of steel reinforcement , form work, Pre-cast, Plastic encapsulated CI/MS Foot Rest, MS flats for the support of pre-cast, proper curing of concrete work complete in all respect as per specifications and standard drawings and as directed by Engineer-in-Charge.
For Class-AA loading
-
-
-
... More
Scour valve chamber of size 1.13 m x0.85 m x1.350 m-
for pipe size-upto 100 mm
687
29312
20137344
... More
Sluice valve chamber of size 1.170m x0.95 m x1.470 m-
for pipe size-upto 150 mm
272
32830
8929760
... More
Sluice valve chamber of size 1.260m x1.185 m x 1.880 m-
for pipe size-150upto 300 mm
282
44112
12439584
... More
Sluice valve chamber of size 1.39m x1.43m x2.245m
for pipe size-from 350-to-450mm
39
56913
2219607
... More
Sluice valve chamber of size 1.750 m x1.610 m x 2.850 m-
for pipe size-500upto 700 mm
17
80204
1363468
... More
Scour valve chamber of size 2.070m x1.830 m x3.4555 m-
for pipe size-700 mm upto 1000 mm
5
110146
550730
... More
Construction of RCC Junction valve chamber for different type of valves including earthwork excavation, 100mm PCC M15 as leveling course, RCC M25 grade for base slab, side wall & cover slab , including cost of steel reinforcement , form work, Pre-cast, Plastic encapsulated CI/MS Foot Rest, MS flats for the support of pre-cast, proper curing of concrete work complete in all respect as per specifications and standard drawings and as directed by Engineer-in-Charge.
For Class-AA loading
-
-
-
... More
Junction valve chamber of size 1.8m x2.1 m x2.0 m-
for pipe size-upto 100 mm
59
43061
2540599
... More
junction valve chamber of size 1.9m x2.2 m x2.5 m-
for pipe size-upto 150 mm
23
49079
1128817
... More
junction valve chamber of size 1.5m x2.1 x2.4 m-
for pipe size-upto 200 mm
9
54732
492588
... More
junction valve chamber of size 1.5m x2.3 x2.5 m-
for pipe size-upto 300 mm
2
60871
121742
... More
SITC of Bulk Flow Meter with removable mechanism class "B" confirming to ISO:4064:2005/ IS: 2373 of approved make of following dia sized pipelines and specifications complete: Media : Water (Clear ), Temp. 50 deg., Pr. rating: PN16, Protection type: IP- 68, Body Material : IS-210 Gr. FG-200, Accuracy Class :Class B (±2 % @ Nominal flow rate), Magnetic Drive, Dry Dial, Epoxy powder coated, Pulse out put option, Anti-magnetic protection including all materials and making
connection with existing pipeline required for Bulk Flow Meter including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In-Charge.
Note: Rates are exclusive of tail piece / dismantling joints and earth work.
-
-
-
... More
80 mm dia
12
10938
131256
... More
100 mm dia
111
13359
1482849
... More
125 mm dia
39
18559
723801
... More
150 mm dia
89
20709
1843101
... More
200 mm dia
38
26219
996322
... More
Construction of Village Transfer Chambers
295
58501
17257795
... More
Construction of CVC
20
29980
599600
... More
Dismantling of flexible pavement for pipe line and chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work.
-
-
-
... More
Bituminous courses
27034.9
362
9786633.04
... More
Granular courses
36414.73
259
9431416.11
... More
Dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work.
133923.5
653
87452042.24
... More
Providing and laying in position cement concrete M10 grade nominal mix 1:3:6 (1 Cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work.
87931.26
4033
354626769.08
... More
Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work.
-
-
-
... More
M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).
101842.77
5312
540988809.11
... More
Providing Household Tap Connection as per technical specification and approved drawing as per relevant IS code (amended up to date) from uPVC/DI/AC/MS/GI pipe line up to consumer meter/premises by using PVC/MS saddle piece (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil (excluding road); depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including MS/PVC saddle piece, gunmetal ferrule 4.0 mm , GM Full-way Valve (IS:778 Mark) or wheel valve and specials, below ground level 20 mm nominal dia MDPE pipe PE 80 PN 16 as per ISO 4427 / 20 mm nominal dia PPR-C (Three layered) pipe PN16 SDR 7.4 (IS:15801:2008) (ISI mark) and above ground level using 20 mm dia PPR-C pipe with standard PPR fittings/ 15 mm dia GI pipe with fittings in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . The service line should be laid at least 45 cm below ground level.
Note: Road cut and restoration is not part of this item and paid seperately.
-
-
-
... More
For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr.
23772
1429
33970188
... More
Providing Household Tap Connection as per technical specification and approved drawing and as per relevant IS code (amended up to date) from HDPE pipe line up to consumer meter/premises by using electro fusion saddle piece (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including electrofusion saddle piece, gunmetal ferrule 4.0 mm , GM Full-way Valve (IS:778 Mark) or wheel valve and specials, below ground level 20 mm nominal dia MDPE pipe PE 80 PN 16 as per ISO 4427 / 20 mm nominal dia PPR-C (Three layered) pipe PN16 SDR 7.4 (IS:15801:2008) (ISI mark) for and above ground level using 20 mm dia PPR-C pipe with standard PPR fittings/ 15 mm dia GI pipes with fittings in the premises for fixing a tap / meterbox (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . The service line should be laid at least 45 cm below ground level.
Note: Road cut and restoration is not part of this item and paid seperately.
-
-
-
... More
For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr.
17113
1786
30563818
... More
P& F Bib cock (IS : 8931 mark), superior quality of approved make , brss 400 gm, 15 mm nominal bore.
40885
271
11079835
... More
Road cutting for house hold service connection in minimum trench width whereever road crossing is required. Road cutting of cement concrete,WBM, Black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with Cement concrete with PCC M-10 and CC M-30 grade as per specification and direction of Engineer in charge.
81770
172
14064440
... More
Add extra over item no 1.21 & 1.22 for providing 20 mm PE 80 PN 16 as per ISO 4427 MDPE pipe including excavation, providing, laying & jointing of service line above 5.00 mtr.
204425
40
8177000
... More
Construction of Stand Post for FHTC
20442.5
1525
31174812.5
... More
Construction of Pump house of required size suitable for installation of maximum 4 no. monoblock pump sets as per approved GA drawing, scope of work and technical specification complete work in all respect including electrical works for lighting and fans, rain water drainage. The plinth area of pump house shall be area of measurement.
1687
17485
29497195
... More
Providing, installation, testing, trial run and commissioning of the following, as per specifications
-
-
-
... More
Supply erection testing and commissioning of pumps and motors of approved duty conditions as per scope of work and specification given in tender document
-
-
-
... More
IPS-01 RAJGARH-IPS -04/CPS-03 BASSI-IPS-02/CPS - 04 SEMALPURA Route, 510 LPS/20 m head/(1W+1S) of 160 KW ( HSC PUMP)
320
8100
2592000
... More
IPS -04/CPS-03 BASSI-CCL-07-PRO_OHSR (Z-3) BIJAYPURA 100 KL/18 M-IPS-05/CPS-12 PALCHA Route, 63.43 LPS/120 m head/(1W+1S) of 160 KW ( HSC PUMP)
320
8100
2592000
... More
IPS-05/CPS-12 PALCHA-CPS-05 BARAWALI Route, 29 LPS/100 m head/(1W+1S) of 75 KW ( HSC PUMP)
150
8100
1215000
... More
IPS-05/CPS-12 PALCHA-CCL-26-PRO_OHSR PAL 150 KL/20 M Route, 22.03 LPS/125 m head/(1W+1S) of 75 KW ( HSC PUMP)
150
8100
1215000
... More
CPS-14 SAMRI-NCL-09A_PRO_OHSR_MURLIYA Route, 19.28 LPS/70 m head/(1W+1S) of 30 KW ( HSC PUMP)
60
8100
486000
... More
Providing, installation, testing and commissioning of Centrifugal Monoblock pump set conforming to IS 9079 , 2 pole motor operating at syncronised speed of 3000 RPM with requisite MOC impeller, priming funnel, cock, suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply. Motor shall be TEFC type and Pump set shall be suitable for working at various discharge and head requirements as per scope of work. Pump shall be erected on C.C. foundation / cross channels / RSJ frame block with suitable foundation bolts grouted in C.C. foundation block etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions mentioned in TD.
-
-
-
... More
2.2 KW (3.0 HP)
6
29371
176226
... More
3.7 KW (5.0 HP)
10
37724
377240
... More
5.5 KW (7.5 HP)
2
47608
95216
... More
7.5 KW (10 HP)
10
58202
582020
... More
9.3 KW (12.5 HP)
8
67983
543864
... More
11.0 KW (15 HP)
8
71679
573432
... More
15.0 KW (20.0 HP)
14
93815
1313410
... More
18.5 KW (25.0 HP)
8
123818
990544
... More
Providing and fixing at site with necessary packing, Horizontal Centrifugal Split Casting pumps with 4 pole induction motor operating at syncronised speed of speed 1500 RPM as per IS 12615: 2011 or amended up to date , CI casing and casing ring, SS 316 impeller, SS 410 Shaft and shaft sleeve, coupling guard, common base plate, foundation bolts, Cement concrete foundation etc. complete with all respect as per the specification and scope of work and direction of Engineer in Charge of following range of duty conditions.
Note: Duty condition of required pump shall also be mentioned in BoQ.
-
-
-
... More
Discharge 20 to 30 LPS and head 41 to 50 M
2
246236
492472
... More
Discharge 20 to 30 LPS and head 51 to 60 M
4
282163
1128652
... More
Discharge 20 to 30 LPS and head 61 to 70 M
6
360058
2160348
... More
Discharge 41 to 50 LPS and head 71 to 80 M
2
579803
1159606
... More
Discharge 61 to 70 LPS and head 51 to 60 M
2
579803
1159606
... More
Discharge 81 to 90 LPS and head 31 to 40 M
3
495200
1485600
... More
Discharge 91 to 100 LPS and head 81 to 90 M
2
1105418
2210836
... More
Providing, installation, testing and commissioning of following Stain less steel AISI 304 Expansion bellows of 10/16 bar rating with tie rods as per technical specifications and layout drawings including jointing material like nuts, bolts, rubber gaskets etc. complete in all respect as per technical specification and direction of Engineer In-Charge.
-
-
-
... More
100 mm dia
30
7189
215670
... More
150 mm dia
22
9866
217052
... More
200 mm dia
6
11167
67002
... More
250 mm dia
5
13674
68370
... More
800 mm dia
2
104337
208674
... More
Providing, lowering, aligning, fixing in position in pipe line, DI D/F resilient seated (soft seated) Swing type Non Return Valve of approved make of following Pressure rating & dia complete, generally confirming to IS: 5312 (part -1)/ 2004 (amended up to date) and of following specifications: Body, Bonnet & disc of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Face to face dimensions as per IS 5312 (part -1):2004 Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body, cover and disc inside and outside . Disc seal ring of EPDM/ Neoprene (food grade quality) and disc seal retaining ring of SS/CS.Shaft of SS- AISI- 410, Hinge SS AISI 316/410 ,Bonnet Gasket EPDM ,Bush- Brass with EPDM/NBR "O "ring seal Nut-Bolt confirming to IS:1363 and IS: 1367 (galvenised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
800 mm dia
2
1694467
3388934
... More
SITC of D/F Full bore type Electromagnetic Flow Meter of approved make of following dia and specifications complete: Media : Water (Raw/ Chlorinated) , Pressure : up to 1.5MPa, Process temp: - 50 deg C, Flow/Meter Tube : SS 304, Electrode : SS AISI 316L / Hastelloy C276/ Tantalum, Lining Material : Hard Rubber/ Neoprene / Poly-urethane (PU) , Flange : SS / CS, Flange Standard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Cast Aluminium, with anticorrosive paint & provide completely sealed (leak proof) construction as per requirement of IEC 60529, Accuracy : ± 0.5 % M.V.- velocity 0.3 to 10 m/s, Transmitter/ signal convertor Enclosure : Die Cast Aluminium, Power Supply : 80-240 V AC - 50Hz, Output 1 : 4-20 mA, Output 2: Pulse, Communication Output : RS 485/ Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parameters and totalizer value during power failure, Protection category- IP 68 for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, if required, and all materials required for making connection with existing pipeline including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In-Charge. Note: Rates are exclusive of tail piece / dismantling joints and earth work.
-
-
-
... More
100 mm dia
55
101884
5603620
... More
150 mm dia
17
125776
2138192
... More
200 mm dia
6
130542
783252
... More
300 mm dia
3
188460
565380
... More
350 mm
1
490354
490354
... More
400 mm dia
3
237746
713238
... More
700 mm
1
565665
565665
... More
800 mm dia
1
595353
595353
... More
900 mm
1
634054
634054
... More
Providing, lowering, aligning, fixing in position in pipe line, DI double flanged resilient seated Dual plate check valave of approved make of following Pressure rating & dia complete, as per API: 594/ API: 598 and of following specifications: Body & Bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Disc / plates - SG-400/12 or CF-8M,Face to face dimensions as per API: 594 , Flanges Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body and cover inside and outside . Disc seal ring of EPDM/ Neoprene (food grade quality) and disc seal retaining ring of SS/CS. Shaft of SS- AISI- 304/410 , Hinge SS AISI 316/304,Spring SS AISI 316/304,Bonnet Gasket EPDM ,Bush- Brass with EPDM/NBR "O "ring seal, Nut-Bolt confirming to IS:1363 and IS: 1367 (galvenised steel) , Insersion rubber of black EPDM 6mm thick .Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
100 mm dia
30
11519
345570
... More
150 mm dia
22
18052
397144
... More
200 mm dia
6
31474
188844
... More
250 mm dia
4
47476
189904
... More
Construction of Flow Meter Chamber in required size and shape as per drawing including required excavation of earth in all types of soil such as murrum, sand, sandy silt, black cotton soil, hard soil, kankar and all types of rocks etc.,disposing of surplus excavated material within a lead of 50 meters. The work includes laying of 100 mm thick plain cement concrete 1:4:8(1 cement : 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) in bedding and foundation, construction of 150 mm thick RCC walls in M-20 grade C.C., covering it with class -A loading ferro cement covers of required sizes and complete with removal of excess material and making clean the site upto the satisfaction of Engineer in charge
10
102465
1024650
... More
Supplying, erecting, testing & commissioning of Electrically Operated Travelling Crane (EOT) .Main girder & End Carriage fabricated from Rollled Steel Section, Gear Box for all motion, Electro Magnetic Friction Disc Type Brakes, all safety limit switches, LT wheels EN 9, Double Flanged 4No, with Sq. Cage motor of adequate rating (KW), duly painted mechanical cleaning and one
coat of primer and two coat of synthetic paint and as per the direction of the Engineer
2 MT Capacity
9
373700
3363300
... More
Supplying, erecting, testing & commissioning of Electrically Operated Travelling Crane (EOT) .Main girder & End Carriage fabricated from Rollled Steel Section, Gear Box for all motion, Electro Magnetic Friction Disc Type Brakes, all safety limit switches, LT wheels EN 9, Double Flanged 4No, with Sq. Cage motor of adequate rating (KW), duly painted mechanical cleaning and one
coat of primer and two coat of synthetic paint and as per the
direction of the Engineer
3 MT Capacity
1
457900
457900
... More
Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge.
MS pipe specials above 600mm dia(with minimum 6.3mm thickness sheet)
Reducer/Enlarger
500
129
64500
... More
SITC DOL Starter type LT Panel of following rating, all switchgears are of PHED approved makes, CRCA sheet of Panel enclosure is of TATA/ Essar 1.6mm/ 2.0mm thick duly Electrostatic Powder Coated with angle frame including other ancillaries ( Insulators, Acrylic Sheet , Baklight Sheet, Hardware, Wire, Name Plates, Lugs, Pvc Channel , Mcb Chanel , Lock, Hing , Bidding , Connectors, Netural Links , Sprial , Saddle & Packing Material ) etc. complete as per Technical Specifications and as per direction of Engineer-In-Charge.
-
-
-
... More
DOL STARTER 2.2 KW (3 HP)- : For 2 motors (1 W+ 1S) I/C - MCB 25A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 30/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and O/G- MCB 16A ,TP, 10 KA, C Curve (2), Power Cont 9A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (4-6A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Priventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 2 Kvar (2)
3
45061
135183
... More
DOL STARTER 3.7KW (5 HP ) - : For 2 motors (1 W+ 1S) I/C - MCB 32A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 30/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and O/G- MCB 25A ,TP, 10 KA, C Curve (2), Power Cont 12A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (7-10A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Priventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 2 Kvar (2)
4
46171
184684
... More
DOL STARTER 5.5 KW (7.5HP) - : For 2 motors (1 W+ 1S) I/C - MCB 40A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 30/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and O/G- MCB 25A ,TP, 10 KA, C Curve (2), Power Cont 12A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (7-10A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Priventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 2 Kvar (2)
1
47001
47001.05
... More
SITC STAR DELTA Starter type LT Panel of following rating: all switchgears are of PHED approved makes, CRCA sheet of Panel enclosure is of TATA/ Essar 1.6mm/ 2.0mm thick duly Electrostatic Powder Coated with angle frame including other ancillaries ( Insulators, Acrylic Sheet , Baklight Sheet, Hardware, Wire, Name Plates, Lugs, Pvc Channel , Mcb Chanel , Lock, Hing , Bidding , Connectors, Netural Links , Sprial , Saddle & Packing Material ) etc. and 100A/ 125A ,TPN, Aluminum Bus Bar with Colour coated heat shrinkage sleeves complete as per Technical Specifications and as per direction of Engineer-In-Charge.
-
-
-
... More
STAR DELTA STARTER 7.5 KW (10.0 HP) - : For 2 motors (1 W+ 1S) I/C - MCB 63A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 60/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and O/G- MCB 32A ,TP, 10 KA, C Curve (2), Power Cont 18A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (7-10A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Priventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 5Kvar (2), S/D Timer(2)
4
58735
234940
... More
STAR DELTA STARTER 11.0 KW (15.0 HP) - : For 2 motors (1 W+ 1S) I/C - MCB 63A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 60/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and O/G- MCB 40A ,TP, 10 KA, C Curve (2), Power Cont 25A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (9-13A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Priventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 7.5Kvar (2), S/D Timer(2)
2
64153
128306
... More
STAR DELTA STARTER 15 KW - : For 2 motors (1 W+ 1S) I/C - MCB 63A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 60/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and O/G- MCB 40A ,TP, 10 KA, C Curve (2), Power Cont 25A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (9-13A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Priventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 7.5Kvar (2), S/D Timer(2)
2
91403
182806
... More
Design & Construction of Rectangular clear water Reservoirs of required capacity at following places, including its piping, fittings, etc complete in all respect as per the scope of work & specifications given in tender document
-
-
-
... More
IPS RAJGARH
6450000
4
29347500
... More
Semalpura
4600000
4
20930000
... More
CPS-06 GHATIYAWALI
1300000
5
7605000
... More
CPS-07 KANNOJ
1600000
5
9360000
... More
CPS-10 PANDOLI
1500000
5
8775000
... More
Construction of RCC (Flat slab type) Clear Water Reservoir of following capacity as per the Scope of work and Technical specification, consisting of the following main activities: -
-
-
-
... More
a) Topographic survey, preparation of site contour plan, conducting SBC test and its approval from department before construction. Submission and approval of concrete mix design and water quality test report for water to be used in construction. b) Excavation in all types of soil, PCC below foundation & all RCC Work including all labour and material charges including providing and fixing of accessories such as SS ladder, SS manhole frame and covers, water level indicator (float type), SS ventilator with SS screen, float valve, puddle collars, G.I. pipe railing around walk way, Top Dome/Slab, Staircase.
c) CWR shall be provided with adequate plinth protection all around the structure in a width starting from edge of structure at GL and extending at least up to 1.0m beyond the vertical wall of CWR. The plinth protection shall consist of 150mm thick PCC in M-15 concrete over 150mm thick compacted soil fill.
d) Providing and applying two coats of food grade epoxy paint on the inside surface of the roof slab, and 600 mm height of the vertical wall. e) Successful hydro test and water tightness test as per I.S. code.
f) Providing and applying three coats of anti-carbonation paint on the roof Slab.
g) Providing and applying three coats of cement-based paint on the remaining external surface area of the structure.
-
-
-
... More
h) Providing and fixing SS-304 ventilator, SS 304 manhole frame and cover and SS 304 ladder from roof slab to bottom Slab, inside container. Providing and fixing water level indicator (Float type).
i) Providing and fixing MS ladder from ground to top slab. j) All MS parts to be painted with two coats of the enamelled paint over the primer coat of red oxide.
k) Providing and fixing of 150mm wide water bar for the construction joints in the container.
l) Providing and fixing CI/DI puddle collars the vertical wall for connecting inlet, outlet, overflow and washout pipes of the reservoir.
m) Inlet, outlet, overflow, washout pipes and valves are not included in this work, provision for the same shall be taken separately.
-
-
-
... More
Rates for RCC Partially Underground type clear water reservoir SBC 7 T/sqm, SEISMIC ZONE-2,3 & 4
-
-
-
... More
CCL-1 (50 KL) at MANGODARA
50000
7
395000
... More
CCL-2 (75 KL) at RAWAT KA TALAB
75000
7
546000
... More
CCL-2 (75 KL) at PALCHA
75000
7
546000
... More
CCL-07 (100 KL) at BIJAYPUR
100000
6
697000
... More
CCL-16 (100 KL) at MENON KANTHRIYA
100000
6
697000
... More
CCL-18 (50 KL) at BOBLA KHURD
50000
7
395000
... More
CCL-22 (100 KL) at GADWARA
100000
6
697000
... More
CCL-19 (75 KL) at SURAJPOL
75000
7
546000
... More
CCL-30A (100 KL) at NEEM KA AMRANA
100000
6
697000
... More
CCL-24A (100 KL) at OCHARI
100000
6
697000
... More
CCL-20 (50 KL) at EKLINGPURA
50000
7
395000
... More
NCL-2 (100 KL) ARNODA
100000
6
697000
... More
BHCL-1 (100 KL) NERA BHADESAR
100000
6
697000
... More
Construction of RCC (Dome type) Clear Water Reservoir of following capacity as per Scope of work and Technical specification, consisting of the following main activities: -
-
-
-
... More
a) Topographic survey, preparation of site contour plan, conducting SBC test and its approval from department before construction. Submission and approval of concrete mix design and water quality test report for water to be used in construction. .
b) Excavation in all types of soil, PCC below foundation & all RCC Work including all labour and material charges including providing and fixing of accessories such as SS ladder, SS manhole frame and covers, water level indicator (float type), SS ventilator with SS screen, float valve, puddle collars, G.I. pipe railing around walk way, Top Dome/Slab, Staircase.
c) CWR shall be provided with adequate plinth protection all around the structure in a width starting from edge of structure at GL and extending at least up to 1.0m beyond the vertical wall of CWR. The plinth protection shall consist of 150mm thick PCC in M-15 concrete over 150mm thick compacted soil fill.
d) Providing and applying two coats of food grade epoxy paint on the inside surface of the roof slab, and 600 mm height of the vertical wall. e) Successful hydro test and water tightness test as per I.S. code.
f) Providing and applying three coats of anti-carbonation paint on the roof Slab.
g) Providing and applying three coats of cement-based paint on the remaining external surface area of the structure.
-
-
-
... More
h) Providing and fixing SS-304 ventilator, SS 304 manhole frame and cover and SS 304 ladder from roof slab to bottom Slab, inside container. Providing and fixing water level indicator (Float type).
i) Providing and fixing MS ladder from ground to top slab. j) All MS parts to be painted with two coats of the enamelled paint over the primer coat of red oxide.
k) Providing and fixing of 150mm wide water bar for the construction joints in the container.
l) Providing and fixing CI/DI puddle collars the vertical wall for connecting inlet, outlet, overflow and washout pipes of the reservoir.
m) Inlet, outlet, overflow, washout pipes and valves are not included in this work, provision for the same shall be taken separately.
-
-
-
... More
Rates for RCC Partially Underground type clear water reservoir SBC 7 T/sqm, SEISMIC ZONE2,3
-
-
-
... More
At CPS-12/PALCHA-1Nos
400000
5
2244000
... More
AT CPS-05 BARAWALI & CPS-14 SAMRI (2 Nos)
1400000
4
6300000
... More
At IPS-11 JALAMPURA & IPS -04/CPS-03 BASSI
1800000
4
7848000
... More
Construction and commissioning of RCC flat slab Over Head Service Reservoir of following capacity and staging including all material and labour charges as per the Scope of work and Technical Specification, consisting of the following main activities: -
-
-
-
... More
a) Topographic survey, preparation of site contour plan, conducting SBC test and its approval from department before construction. Submission and approval of concrete mix design and water quality test report for water to be used in construction. b) Excavation in all types of soil, PCC below foundation, all RCC Work, Plinth protection all around the structure including all material, labour, shuttering, scaffolding etc.
c) OHSR shall be provided with adequate plinth protection all around the structure in a width starting from edge of structure at GL and extending at least up to 1.0m beyond the edge of outer most projection of OHSR. The plinth protection shall consist of 150mm thick PCC in M-15 grade concrete laid over 150mm thick layer of compacted soil. d) Providing and applying two coats of food grade epoxy paint on the inside surface roof slab, and 600 mm height of the vertical wall.
e) Successfully hydro test and water tightness test as per I.S. code.
f) Providing and applying three coats of anti-carbonation paint on the top surface of the roof slab.
g) Providing and applying three coats of cement-based paint on the external surface of the container, balcony, cone wall, columns & beams etc.
h) Providing and fixing SS-304 ventilator, SS 304 manhole frame and cover and SS-304 ladder from top Slab to bottom Slab inside container. i) Providing and fixing of MS section ladder from the last landing to balcony and MS ladder with safety cage from balcony to top slab.
-
-
-
... More
j) Providing and fixing water level indicator (float type).
k) Providing and fixing of hand railing all around the balcony, roof and staircase, consisting of 25mm diameter Class-B GI pipe in two rows and 1000 mm high, 50X50X6mm angle iron vertical post at a maximum spacing of 1500mm centres.
l) All MS parts to be painted with two coats of the enamel paint over the primer coat of red oxide.
m) Providing and fixing of 150mm wide PVC water bar for the construction joints in the container (vertical wall & cone wall).
n) Providing one Aluminium portable ladder of appropriate length to access first landing (3.5 to 4.5m above GL) from ground.
o) Lighting arrestor consisting of providing and fixing of 2 Nos. of chemical earthing and connecting it to the conical cover of SS ventilator with two separate GI strips of 50mmX3mm
p) CI/DI puddle collar shall be fixed in the bottom/slab for connecting inlet, outlet, overflow and washout pipe of the reservoir.
q) Painting the name of the scheme and other details on the reservoir, and any other work related to structure as per the directions of Engineer-in- Charge, Technical Specification and Scope of Work.
r) Inlet, outlet, overflow, washout pipes and valves are not included in this work, provision for the same shall be taken separately.
-
-
-
... More
Rates for RCC OHSR,SBC 10 T/sqm, SEISMIC ZONE-II & STAGING 15 M
-
-
-
... More
50 KL, staging Height 15 m (1-Nos.)
50000
35
1761000
... More
Construction and commissioning of RCC INTZE type Over Head Service Reservoir of following capacity and staging as per the Scope of work and Technical specifications, consisting of the following main activities: -
-
-
-
... More
a) Topographic survey, preparation of site contour plan, conducting SBC test and its approval from department before construction. Submission and approval of concrete mix design and water quality test report for water to be used in construction. b) Excavation in all types of soil, PCC below foundation, all RCC Work, Plinth protection all around the structure including all material, labour, shuttering, scaffolding etc.
c) OHSR shall be provided with adequate plinth protection all around the structure in a width starting from edge of structure at GL and extending at least up to 1.0m beyond the edge of outer most projection of OHSR. The plinth protection shall consist of 150mm thick PCC in M-15 grade concrete laid over 150mm thick layer of compacted soil. d) Providing and applying two coats of food grade epoxy paint on the inside surface on the top dome, edge beam and 600 mm height of the vertical wall.
e) Conducting successfully hydro test and water tightness test as per I.S. code.
f) Providing and applying three coats of anti-carbonation paint on the top surface of the Top Dome.
g) Providing and applying three coats of cement-based paint on the external surface of the container, balcony, cone wall, columns & beams etc..
h) Providing and fixing SS-304 ventilator, SS 304 manhole frame and cover and SS-304 ladder from top dome/Slab to bottom dome/Slab inside container. i) Providing and fixing of MS section ladder from the last landing to balcony having railing all around it and MS ladder with safety cage from balcony to top dome/slab.
j) Providing and fixing water level indicator (float type).
-
-
-
... More
k) Providing and fixing of hand railing all around the balcony, top dome and staircase consisting of 25mm diameter Class-B GI pipe in two rows and 1000 mm high, 50X50X6mm angle iron vertical post at a maximum spacing of 1500mm centres.
l) All MS parts to be painted with two coats of the enamel paint over the primer coat of red oxide.
m) Providing and fixing of 150mm wide PVC water bar for the construction joints in the container (vertical wall & cone wall).
n) Providing one Aluminium portable ladder of appropriate length to access first landing (3.5 to 4.5m above GL) from ground.
o) Lighting arrestor consisting of providing and fixing of 2 Nos. of chemical earthing and connecting it to the conical cover of SS ventilator with two separate GI strips of 50mmX3mm.
p) CI/DI puddle collar shall be fixed in the bottom dome/ slab for connecting inlet, outlet, overflow and washout pipe of the reservoir.
q) Painting the name of the scheme and other details on the reservoir, and any other work related to structure as per the directions of Engineer-in- Charge, Technical Specification and Scope of Work.
r) Inlet, outlet, overflow, washout pipes and valves are not included in this work, provision for the same shall be taken separately.
-
-
-
... More
Rates for RCC OHSR,SBC 10 T/sqm, SEISMIC ZONE-II 18 M Staging
-
-
-
... More
100 KL, staging Height 18 m (10-Nos.)
1000000
25
25180000
... More
150 KL, staging Height 18 m (6-Nos.)
900000
19
17244000
... More
200 KL, staging Height 18 m (6-Nos.)
1200000
17
20532000
... More
Rates for RCC OHSR,SBC 10 T/sqm, SEISMIC ZONE-II 20 M Staging
-
-
-
... More
100 KL, staging Height 20 m (4-Nos.)
400000
27
10964000
... More
150 KL, staging Height 20 m (6-Nos.)
900000
20
18639000
... More
200 KL, staging Height 20 m (6-Nos.)
1200000
18
21888000
... More
250 KL, staging Height 20 m (2-Nos.)
500000
17
8680000
... More
300 KL, staging Height 20 m (1-Nos.)
300000
16
5049000
... More
350 KL, staging Height 20 m (1-Nos.)
350000
14
5229000
... More
Rates for RCC OHSR,SBC 10 T/sqm, SEISMIC ZONE-II 22 M Staging
-
-
-
... More
150 KL, staging Height 22 m (1-Nos.)
150000
22
3310500
... More
200 KL, staging Height 22 m (1-Nos.)
200000
19
3870000
... More
250 KL, staging Height 22 m (1-Nos.)
250000
18
4540000
... More
250 KL, staging Height 24 m (1-Nos.)
250000
18
4722500
... More
Supply, installation, testing and commissioning of CI Float Valve (Auxiliary type) at Inlet of OHSR/GLSR including all necessary specials required
-
-
-
... More
100 mm dia
40
68515
2740600
... More
150 mm dia
6
82495
494970
... More
200 mm dia
1
124435
124435
... More
Providing and fixing of flanged/ plain ended MS special of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depth in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge.
34625.42
122
4224300.87
... More
Construction of boundary wall of Brick/ stone masonary as per enclosed GA drawing, scope of work and technical specifications complete work in all respect. Brief details of boundary wall parameter is as below:
1. Depth of foundation- 900 mm.
2. PCC in M-10, width -900 mm and thickness 100 mm,
3. Stone masonary in CM: 1:6 section of foundation above PCC, 600 mm (W )x 450 mm (D) and 450 mm (W) x 450 mm (D) 4. Superstructure work: Stone masonary in CM: 1:6, W-300, height-1650 mm,/ Brick work in CM: 1:6 W-230 mm, height- 1650 mm.
5. Cement mortar pointing on Stone masonary and cement mortar plaster 20 mm thick on brick masonary in CM 1:6.
6. Expansion joint shall be on every 30 mtr.
7. On top of wall there shall be CC Coping 75 mm thick (1:2:4) shall be provided.
8. Pillar for main gate 350x350 mm in size is part of boundary wall.
9. Cement paint of approved colour in 3 coat shall be done.
12000
5017
60204000
... More
Providing and fixing steel, gate, grating and grills made of angles, tees, square bars, flats or black pipe with hold fast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide and two coat of enamal paints.
13750
104
1430000
... More
Providing,installation, testing and commisioning of vacuum Feed Gas Chlorinator with all assessories and making connection with
existing pipeline required including supply & instalation of trunnion roller support, auxillary container valve, fluxible copper connector,manifold valve, tonner manifold pipes, chlorine Pressure gauge, Isolation valve, gas filter, pressure reducing valve, chlorine gas pipe with fittings, diffuser, lifting beam, load indicator, 25 NB PP diaphragm Valve on injector inlet & outlet, 32 OD uPVC pipe for chlorine solution, 25 NB GI pipe for pump suction & delivery, 25 NB GM gate valve on pump suction & delivery, 25 NB GM 'Y' type stainer on pump suction, 25 NB GM Check valve on pump delivery, pressure gauge with Isolated valve on pump delivery and chlorine booster pump with motor of required capacity complete in all respect as per specification and the direction of the Engineer
-
-
-
... More
3 kg/hr capacity
10
495700
4957000
... More
Construction of Chlorination Room at proposed location
240
17485
4196400
... More
Earth work in excavation over areas (exceeding 30cm in depth, 1.5 Mtr. in width as well as 10 Sqm on plan) including disposal of excavated earth lead up to 50m and with all lift disposed earth to be levelled and neatly dressed:
4544.17
113
513491.32
... More
Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like with pumping set of following H.P. including P.O.L./Power consumption etc. complete.
-
-
-
... More
5 - 9 HP
1901.7
138
262434.6
... More
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.
-
-
-
... More
M10 grade Nominal Mix (with graded stone aggregate 20mm nominal size).
1449.1
3353
4858836.22
... More
Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. M25
825.7
5419
4474477.24
... More
Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift.
3484.91
48
167275.57
... More
Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation in basements rafts, footings, straps beams, bases of columns etc. up to plinth level.
1051.01
117
122968.37
... More
Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with wooden members and removal of formwork for upto floor three level for :
4865.18
306
1488744.1
... More
Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level.
-
-
-
... More
Thermo-mechanically Treated bars (Conforming of relevent IS code)
45372.28
76
3448293.57
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete:
1515.18
70
106062.74
... More
Providing and fixing cow catcher made of R.S. joist angles channels MS round including cutting welding and fabrication with priming coat of red oxide
1500
84
126000
... More
Diluting and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which aproch is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment and excluding the cost of chemical emulsion)
1267.5
183
231952.5
... More
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.
-
-
-
... More
M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
118.45
3353
397171.23
... More
Providing and laying damp-proof course with cement concrete grade M-150 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compound complete as per specification .
-
-
-
... More
75mm thick.
332.41
377
125317.82
... More
Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix Providing M-25 grade concrete by using min 410 kg of cement per cum instead of M-20 grade design mix.
1804.96
4552
8216186.39
... More
Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor Three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc M20 grade Nominal Mix
382.71
5193
1987391.74
... More
Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.
M20 grade Nominal Mix / Design Mix
165.5
5160
853969.68
... More
Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc.
1205.3
117
141020.1
... More
Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor three level for :
-
-
-
... More
Columns, pillars, posts and struts etc.
1449.5
306
443547
... More
Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.
1523.78
245
373327.23
... More
Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level.
-
-
-
... More
Thermo-mechanically Treated bars (Conforming of relevent IS code)
78242.3
76
5946414.8
... More
Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks
-
-
-
... More
Cement mortar 1 : 6 (1 cement : 6 coarse sand)
482.4
3277
1580824.8
... More
Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :
-
-
-
... More
Cement mortar 1 : 6 (1 cement : 6 coarse sand)
568.55
3901
2217913.55
... More
Half brick masonry in foundation & plinth using bricks of designation 75
-
-
-
... More
Cement mortar 1 : 4 (1 cement : 4 coarse sand)
65
437
28405
... More
Half Brick Masonry in foundation & plinth using bricks of designation 75 in Low cost Shree Binder and sand mortar (1:2) (for non load bearing walls)
340.2
430
146286
... More
Brick work in partition in super structure upto five storey 7cm. thick (brick on edges) using bricks of class designation 75 in :
-
-
-
... More
Cement mortar 1 : 4 (1 cement : 4 coarse sand)
723.2
253
182969.6
... More
Steel work in built up tubular trusses including cutting, hoisting ( height upto 10 m)fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Hot finished seamless type tubes.
9782
109
1066238
... More
Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :
-
-
-
... More
Windows side hung /Ventilators top or centre hung (openable)
133.2
2082
277322.4
... More
Partly fixed and partly openable [ fixed area not to exceed 33%]
100.44
2059
206805.96
... More
Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance.
217.55
606
131833.54
... More
Providing and fixing Square bars or other flat welded to window, ventilatiors etc.
740.11
77
56988.15
... More
Brick on edge flooring with bricks of class designation 75 including cement slurry & pointing in CM (1 : 3) etc. complete laid on 20 mm thick bed of : Cement Sand Mortar 1 : 6
1110
442
490620
... More
P & F 1st qualityHeavy Duty Vitrified Polished Digital tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete. Size 600mm x 600mm
630
1263
795690
... More
Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :
-
-
-
... More
20mm thick .
5062.79
171
865737.52
... More
Add extra for plaster done over ceiling
329.14
33
10861.53
... More
Distempering with dry distemper of approved brand and shade (two or more coats) and of required shade on new work, over and including, priming coat of whiting to give an even shade including all scaffolding.
5470.73
63
344655.94
... More
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade :
-
-
-
... More
Two or more coats on new work including preparation of base with primer, putty, lippy complete in all respect.
1512
71
107352
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
323.64
71
22978.44
... More
Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' : 30mm tick- commercial Veneer Both side
63
1808
113904
... More
Providing and fixing in cement sand mortar 1 : 4 single paitam (rebated) stone doors windows and ventilator frames of approved quarry : Size 100 x 75mm.
135
116
15660
... More
Providing and fixing factory made P.V.C. door frame manufactured by M/s Rajshri of the size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm PVC foam sheet mitred at two corners and jointed with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame shall be fixed to the wall using 65/100 mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4 nos of screw to be provided for each vertical member and minimum 2 nos for horizontal member etc. complete as per manufactures specification and direction of Engineer in Charge.
25.45
496
12623.2
... More
30mm thick factory made solid both side Pre laminated panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15x15mm top & bottom rails. M.S .frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC ‘C channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on either side forming stiles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75 mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2) thick, 20mm wide cross PVC sheet shall be provided as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with 7mm (5mm +2mm) thick x 15mm wide PVC sheet bending on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacture’s specification & drawing.(For W.C.and bathroom door shutter).
9.45
3836
36250.2
... More
Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges :
-
-
-
... More
Sand or other approved stone 35 mm thick
33.3
928
30902.4
... More
Kota stone 25 to 30 mm thick.
684.12
715
489142.8
... More
Extra over item 6.16.1 to 6.16.6 for machine cut both side polished stone is used.
10.19
81
825.37
... More
Wiring of 3 pin 6 amp. Light plug point with 1.5 sq.mm nominal size FR PVC insuilated unsheathed 1.1 kv grade fixible copper conductor and 1.5 sq mm nominal size FR pvc insulated unshjeathed 1.1 kv grade copper earth conductor (IS:694) of approved make double lock/ISI marked single lock pvc casing capping & its accessories, 18 SWG MS box with earth terminal,screwkless cage connector for neutral looping in switch board and falce ceiling point, 6 A switch 6 A socket, 3.0 mm thick phenolic laminated sheet, size platged/brass screws, cup washer making connection testing etc. as required (group 1)
-
-
-
... More
On Board
80
246
19680
... More
S&F power plug point accessories on 18 SWG metal box of size 175x100x60 mm on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp switch and socket outlet making connection testing etc. as required
40
199
7960
... More
S&D FR PVC insulated and unsheathed flexible copper donductor ISI marked (IS : 694)1.1 kv grade approved make existing surface or recessed donduit/casing capping including making connection etc. as required
-
-
-
... More
(A) 2x1.5 sq.mm E040102
400
24
9600
... More
(B) 2x2.5 Sqmm +1x1.5sqmm E 040108
200
57
11400
... More
(C) 2x4.0 sqmmx2.5 sqmm E040117
100
120
12000
... More
P&F ISI marked ding dong musical chime bell including making connection testing etc. required Group-2 E 072700
10
49
490
... More
S&Laying following size earth wire/strip in horizontal or vertical run in ground/surface /recess including riveting,soldering,saddles, making connection etc.as required 8 sWG copper wire E140702
150
81
12150
... More
P&F surface/recessed type 10mm thick teak wood board duly antitermite treate,d varnished and fixed by using gutties/PVC fasteners of following size as required
-
-
-
... More
(A) 250mmx300mm E050905
10
55
550
... More
Plaste earthing as per IS :3043 with copper earth plate of size 600mmx600mmx3.0mm by embodying 3 to 4 mtr.below the ground level with 20mm dia GI B class watering pipe incluiding all accessories like nut,bolt, reducer,nipple, wire meshed funnel and C.C.finished chamber covered with hinged type with loking arrangement CI cover, CI frame of size 300x300mm and embodying the pipe complete with alternatge layer salt and cock/charcoat testing of earth resistance as required E140300
10
8694
86940
... More
P&F stipe type fluoriscent tube fitgting factricating from (CRCA sheet and finished with powder coating/stove enambelled paint/extruded non corrosive UV resist CP channel) complete with accessories like (OCCB,Starter starter seat) EB rotor holder, terminal block duly prewired with copper conductor including mnaking connection testing etc as required (without tube)
-
-
-
... More
(A) 1x36 Watt with OCCB E170112
20
50
1000
... More
P&F IS-66 protected street light luminate on existing bracket suitable for LTL made out from CRDA sheet steel finished with stove enamelled paint having deep drawn aluminium alloy conopy reflector cum control gear trey, clrer ribbed acrylic diffuser hold with synthetic gasket, with all necessary accessories copper wound ballast, capactor,. streter, holder prewired with PVC insulated copper conductor including making connection testing etc. as required (with out tube)
-
-
-
... More
1x30 Watt E181302
10
2396
23960
... More
(A) 36/40 WattsE170112
10
50
500
... More
(B) Triphosphor coated 28 Watts E170122
10
63
630
... More
Wiring for sub mains ISI marked (IS:694) 100 volts grade PVC insulated flat twin core sheathed solid aluminium conductor with 10 SWG GI support wire duky clipped etc as required 6.0 sq.mm E 040502
100
54
5400
... More
P&F 1.6mm thick MS recessed fan box hexagonal/ round of size 100mm dia depth 75mm 12mm dia rod fan hook with 100mm length extended on each side E051000
20
91
1820
... More
P & F 3.0 mm thick Poly propelene plastic polishedconcealed fan box, squre of size (106x106) mm dia, depth 50 mm , 10 mm dia rod of SS with platinium coated with 55 mm length extended on each side . All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR
20
96
1920
... More
P&F 240/415 V AC MCB with positive n ot less than 10 KL (B/C/D tripping characteristic) ISI marked IS 8828 (1996) confirming to IEC 60898 in existing board/sheets including making connections with lugs testing etc. as required single pole MCB 6 A to 32 A rating E 060113
80
142
11360
... More
Providing & Fixing of 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA ( D curve tripping characteristic as per site requirement) 4KV impulse withstand voltage, as per PWD specification for electrical
Works with ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , IP 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 A rating and 10,000 upto 63 A, 5000 for 80 A rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab test reports before execution & All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSRE060211
10
675
6750
... More
P&F recessed/surface mounting heavy duty horizontal type sheat steel D.B.phophatised/powder bus bar, shorting link, earth link and din bar, confirming to IS 13032 & IS 8623 including making internal DB terminations with copper lugs, testing etc as required single door (single phase) 12 way E060614
10
1106
11060
... More
P&F following size double lock/ISI marked single lock PVC casing copping & its accessories like coupler, tee etc. with screws, PVC expansion fasteners as required 25mmx12mm G-2, E010402
80
25
2000
... More
Wiring of light pont/exhaust fan point/call bell point with 1.5 sqmm nominal size PVC insulated stranded/solid aluminium conductor 1;1 kv grade and 2.5 sq mm nominal size PVC isulated aluminium earth conductor (IS:694) of approved make double lock/ISI marked single lock PVC casing & its accessoiries, 18 swg MS box with earth terminal 6 A switch, 3 mm thick phenolic laminated sheet, zink plated/brass screws , cup washers, making connection testing etc. as required
-
-
-
... More
(A) Short point (up to 3.0 mtr.) E010101
80
185
14800
... More
(B) Midium point ( up to 6 mtr.) E010102
40
311
12440
... More
(C) Long point (up to 10.0 mtr.) E010103
20
419
8380
... More
S&F following sizes (dia) of ISI marked medium duly PVC conduit along with accessories in surface/ recessed using saddles clamps fastner as required including cutting the wall and making good the same as required 25mm E020402
190
99
18810
... More
P&F following modular accessories made out of underakable and fire eratardant poly carbonate3 with silver contacts including making connection testing etc as required
-
-
-
... More
(A) 6A one way switch E073401
80
51
4080
... More
(B) 6 A two way switchE073402
10
73
730
... More
(C) 16 A one way switch E073404
10
104
1040
... More
(D) 5 step fan regulator E073601
60
310
18600
... More
P&F following size mounting grid plates with cover plates
-
-
-
... More
(A) 4 Module E073803
20
65
1300
... More
(B) 12 Modules E073808
10
153
1530
... More
Providing & Fixing of extra down rod of 15 mm dia . ERW (Electrical resistance welded ) of 1.6mm nominal thick medium duty steel pipe including cutting, threading, drilling, fixing quarter pin etc as reqd. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR
E151400
20
132
2640
... More
P&F of heavy duty capactor start 900/1400 RPM single phase ISI marked exhaust fan IS :2312 marked in existing opening including making connection testing etc. as required 300mm sweep (900/1400 RPM) E150900
20
2252
45040
... More
Providing & Fixing of ISO certified company made bus barchamber housed in sheet metal box as per PWDspecification for electrical Works Confirming to IEC60439/IS-8623 & IEC-60529/IS-2147 made out from 1.6mm thick powder coated CRCA sheet,degree of protectionIP-31, front openable bus bar made out of aluminium orwrought aluminium alloy suitable for 100 amp. Capacity ,bus bar fixed on porcelain/DMC insulators at approvedspacing including making connections etc. as required.
Appropriate type test certificate / OEM test report shall besubmitted . All as per pre approved by Engineer in charge.For additional technical parameters of products/ work ,refer Annexure "A" attached with this BSR
450 mm long , 4 strip E100904
10
1486
14860
... More
P&F indian type white glazed vitreous china ist quality WC orissa pan (IS 2556 Mark) with 100mm vitreous china P or S trap including cutting and making good the wall and floor size 580x440 mm
10
1635
16350
... More
P&F WVC wash basin (Ist quality IS:2556 Mark) of approved make with C.I.Brackets duly painted 1 No. 15mm CP Pillar cock (IS 8934 Mark) and 32mm CP brass waste coupling of approved make, 25mm GI waste pipe complete including cutting and making good the wall size 580mmx450mm
10
2217
22170
... More
P&F Towel Rall or Ring of approved quality/make CP brass Town pail with brackets 600x20mm
23.32
326
7602.32
... More
P&F PVC storage Tank (IS :12701 marked including the BIS license No.) of approved make with cover 25mm dia 1 M long GI over flow pipe and 25 cm. long wash cut pipe with plug & socket, including making connection etc. complete of approved design
-
-
-
... More
(A) 1000 Litre capacity
10
7563
75630
... More
(B) 500 Litre capacity
9.99
3786
37822.14
... More
P & F Beveled edge Mirror of special glass of approved make (Atul Modi Guard Saint Gobin or equivalent) complete with 6 mm thick asbestos cement sheet ground fixed to wooden screw & washers. Size 600 x 450 mm x 4 mm thick
19.99
360
7196.4
... More
P&F GI Pipe (internal work) with GI fitting (IS 1239 Mark) and MS clamps including cutting and making good the walls and floors Exposed on walls
Size 600 x 450 mm x 4 mm thick
-
-
-
... More
(A) 15mm dia nominal bore 'B' Class
80
191
15280
... More
(B) 25mm dia nominal bore 'B' Class
50
296
14800
... More
P&F GI pipe (External works) with GI fitting (IS 1239 mark) including trenching & refilling earth etc.
-
-
-
... More
(A) 15mm dia nominal bore 'B' Class
80
196
15680
... More
(B) 25mm dia nominal bore 'B' Class
40
248
9920
... More
Making connection of GI distribution branch with GI main including all fitting up to 25mm dia
10
240
2400
... More
P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:
-
-
-
... More
(A) CP Brass Bib cock 15mm nominal bore
20
611
12220
... More
(B) CP Brass Bib cock 15mm nominal bore long body 15mm nominal bore weight not less than 690 gram
20
955
19100
... More
P&F stop cock (IS 8931 mark) superior quality of approved make Brass 400 gram 15mm nominal bore
20
274
5480
... More
P&F Ball cock (IS 1703 Mark) with Rod and PVC Ball complete Brass weight 400 gram 15mm
10
260
2600
... More
P&F full way valve (IS 778 Mark) or wheel valve of approved make
-
-
-
... More
(A) Gun metal 15mm nominal bore
10
308
3080
... More
(B) Gun metal 25mm nominal bore
10
516
5160
... More
P&F sand cast floor Trap (Nahni) of (IS 1729 mark) of approved quality/make with socket down or hinged grating includinbg good the floor Size 100x100mm
10
444
4440
... More
P&F Flush Cock/Flush Valve (IS 9758 mark) for wC of approved quality make
-
-
-
... More
(A) Brass /Gun metal Half-turn weight 1 kg of approved quality /make 25mm nominal bore
10
804
8040
... More
Construction of manhole in all tupe of soil inner size 90x60 Cm 450mm thick masonary in CM 1:5 in foundation, 20mm thick inside plater in CM 1:6 finished with floating neat cement, 50mm thick M-grade C.C.flooring making, channels, 80mm thick stone slab covering with 40mmthick M-15 grade C.C.flooring cement cover with frame of 450mm dia earth hock etc. as per design including disposwal of surplus earth with in 50 mtr. lead Depth up to 0.5 m
20
3990
79800
... More
Construction of soakage well in all type of soil with 300mm thick dry masonary top and bottom 300mm course in CM 1:6 , 80mm thick stone slab, jointing of slab in CM 1:3 Ralthal, kharanja 40mm thick M-15 grade C.C.flooring earth work complete as per approved drawing including disposal of earth with in a lead of 50 mtr. Size 240 cm dia outside and 240 cm depth
10
8642
86420
... More
Construction of septic tank in all types of soil with 40 cm thick masonary in CM 1:6, 15 cm thick C.C.bed of 1:5:10, M-15 grade C.C.flooring & over stone slab covering, 80mm thick slab jointing of slab in CM 1:3 Ralthal, kharanja, 50mm thick stone partition wall, 20mm thick plaster in CM 1:6 finished with neat floating cement 4 Nosa. CI foot rests of approved design two Nos. 450mm dia each Ferro cement cover with frame. earth work etc. with in a lead of 50 mtr.
-
-
-
... More
(A) size 230x110x150 cm (for 20 users)
10
28932
289320
... More
Providing and laying cement concrete 1:5:10 (Stone aggregate 40mm nominal size) up to haunches of S.W.pipes including 150mm thick bed concrete (Width W= Dia of pipe in CM+30 cm) concrete width to be reduced from width W at Centre of pipe to '0' at top of pipe (Excluding cost of pipe) 100mm diameter SW pipe
50
271
13550
... More
Construction of chamber in all type of soil with 300mm thick masonary in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick inside plaster in CM 1:6 finished with floating neat cement 50mm thick M-15 grade C.C.flooring, Ferro work etc. complete as per design including disposal of surplus earth with in a lead of 50 mtr.
-
-
-
... More
(A) Inside size 300x300 mm depth up to 0.5 Cement cover with frame.
20
1569
31380
... More
P&F rigid pvc pipe (IS 4985 mark) class II (4 kg/cm2 ) approved quality,make including jointing the pipe with solvent cement rubber ring and lubricant
-
-
-
... More
(A) 110mm dia
86.6
214
18532.4
... More
P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:
110mm dia
-
-
-
... More
(A) Door bend (Top side)
20
168
3360
... More
(B) Bend 87.50
20
122
2440
... More
(C) Vent Cowel
10
53
530
... More
P&F 15mm dia connection pipe of approved quality /make
-
-
-
... More
(A) PVc Pipe with CP Brass nuts up to length 450mm
20
97
1940
... More
Supply and fixing GI Union ISI marked in GI Pipe line as required complete in all respect of size
-
-
-
... More
(A) 15mm dia nominal bore
20
62
1240
... More
(B) 25mm dia nominal bore
10
128
1280
... More
P&F Grating of approved quality/make stainless steel sheet size 125mm dia
10
66
660
... More
P & F Low level Flushing Cistern of 10 litres capacith (IS : 2556 mark), of approve make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS : 1703 mark) complete including cutting and making good the wall: PVC bend of make commander champion PVC with PVC bend as per IS 7231
10
1206
12060
... More
P &F Kitchen & Lab. Sink of approved make with C.I. brackets duly painted 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor. WVC Lab sink (IS: 2556 mark) size 530 x 430 x 180mm
10
2910
29100
... More
P&F jet spray for water closet with CP copper tube flange of approved make
13.33
300
3999
... More
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 Mtr. in width as well as 10 Sqm on plan including disposal of excavated earth upto 50 Mtr. and lift upto 1.5 Mtr. disposed soil to be levelled and neatly dressed : All Kind of spoil
25000
32
800000
... More
Supplying and stacking of well decayed cow dung manure at site
800
605
484000
... More
Supply and planting following species best quality container grownhealthy trees of 3 mt. min. height, well established & free from disease at site in 1.20 m dia holes, 1.20 m deep dug in the ground,mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required.
-
-
-
... More
Neem(Azadirachta indica)
500
1240
620000
... More
Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils
720
196
141120
... More
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.
-
-
-
... More
M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
69
3554
245226
... More
Providing and fixing up to floor Three Level pre cast cement concrete string or lacing courses, copings, bed plates, anchor blocks, windows sills, shelves, louvers steps, staircases, etc. including carriage, hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering, shuttering and finishing smooth with 6 mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surface, including all T & P, curing etc. complete:M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).
50
6655
332750
... More
Supply and erection of hot dipped galvanised steel swaged tubular pole conforming to IS: 2713-1980 (part I to II) with galvanised base plate of size 400mm x 400mm x 7mm in position including excavation of the pit and filling the same with C.C. of M-10 grade (1:3:6) from base plate to 50cm above ground level, with the help of steel frame not less than 40 cm dia up to 114.3mm outer dia and 50 cm beyond 114.3mm outer dia around the pole. Duly finished with cement plaster, earthing terminals , cable entry, GI cable sleeve complete as required. The pole shall be galvanised using ISI mark tube for structural purpose. (SEE TABLE ): 7.5 mt high- GROUP-1
100
17781
1778100
... More
P & F IP-65 protected street light luminaire on existing bracket LED street light fixture 30-40 watt
100
2806
280600
... More
P/Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size- 10 Sq mm- 4 Core- Group-1
2000
173
346000
... More
Providing and fixing cow catcher made of R.S. joist angles channels MS rounds including cutting welding and fabrication with priming coat of red oxide (as per design).
2500
67
167500
... More
Construction of Soakage well in all types of soil 300mm thick dry stone masonry, top and bottom 300 mm course in CM 1 : 6, 80 mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C. flooring earthwork complete as per approved drawing including disposal of earth within a lead of 50 Mtr.
-
-
-
... More
Size 300 cm dia outside & 300 cm depth
10
21940
219400
... More
Construction of Septic Tank in all types of soil with 40 Cm. thick masonry in CM 1 : 6, 15 Cm. thick C.C. bed of 1 : 5 : 10, M-15 grade C.C. flooring & over stone slab covering, 80 mm thick slab, jointing of slab in CM 1 : 3 Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1 : 6 finished with neat floating cement, 4 Nos C.I. foot rests of approved design, two No. 450 mm dia 25 Kg. of each C.I. cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 Mtr.
-
-
-
... More
Size 400 x 140 x 150 cm (for 50 users)
10
52052
520520
... More
Providing Laying & Jointing glazed S.W. pipes grade "A" (IS : 651 Marked) of approved make with spun yarn & stiff mixture of cement mortar 1:1 excavation & refilling of earth in all types of soil upto 1.2 m. depth, S.W. fittings, including testing of joints etc. complete.
-
-
-
... More
150mm dia
1000
405
405000
... More
Providing and Laying C.C. 1 : 5 : 10 (stone aggregate 40 mm nominal size) all around S.W. pipe including 15 cm. thick bed concrete as per Rajasthan PWD specifications : (Width W = Diameter of pipe in Cm + 40 Cm.). (Excluding cost of pipe )
-
-
-
... More
150mm dia
1000
550
550000
... More
Providing and fixing G.I. pipes (External Work) with G.I. fittings (IS : 1239 Mark) including trenching & refilling earth etc.
-
-
-
... More
25mm dia nominal bore
1000
242
242000
... More
Providing and fixing Ball Cock (IS : 1703 Mark) with Rod & P.V.C. Ball complete.
-
-
-
... More
Brass wt. 1000 gm 25 mm
60
583
34980
... More
Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils
527.26
102
53780.44
... More
Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75
-
-
-
... More
Cement mortar 1 : 4 (1 cement : 4 coarse sand)
270.53
280
75747.42
... More
Supplying and fixing rolling shutters of approved make, made of 80 x 1.25mm. M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including cost of spring hooks, providing and fixing necessary 25.3cm. long wire springs grade No. 2 and M.S. top cover 1.25mm thick for rolling shutters as per design. (Clear openable area to be measured for payment).
57.6
2381
137145.6
... More
60 mm thick cement concrete flooring with Metallic concrete hardener topping, under layer of 42 mm thick cement concrete 1 : 2 : 4 (1 cement : 2 course sand : 4 graded stone aggregate 20 mm nominal size) and top layer of 18 mm thick metallic concrete hardener consisting of mix 1 : 2 (1 cement : 2 stone aggregate, 6 mm nominal size) by volume & mixed with metallic hardening compound of approved quality @ 3 Kg./Sqm including cement slurry, rounding off edges etc. but excluding the cost of nosing of step etc. complete.
480
495
237600
... More
Cement plaster in skirting and / dado with cement mortar 1 : 3 (1 cement : 3 course sand) finished with a floating coat of neat cement including rounding of junctions with floor :
38.4
243
9331.2
... More
Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :
-
-
-
... More
20mm thick .
2289.6
166
380073.6
... More
Colour washing of all shades to give an even shade including all scaffolding :
-
-
-
... More
New work (two or more coats) with a base coat of white washing with lime.
2289.6
205
470512.8
... More
Wiring of 3/5 pin 6 amp. Light plug point as per PWD specification for electrical Works with ISI marked 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade (IS:694) and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) vergin material PVC conduit & it's all accessories( J.B. , Bends etc.) , round tiles,18 SWG G.I. box with earth terminal of required size, 6 A switch, 3/5 pin 6 A socket, 3.0 mm thick ISI marked phenolic laminated sheet (IS : 2036 - 1995), Al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by Engineer in charge, making connections, testing etc. complete as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
Short point (up to 3 mtr.)
80
197
15760
... More
Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 m, including taking out the excavated soiland depositing and refiling of jhiri with watering and ramming and disposal of surplus excavated soil as directed within a lead of 50 m.Incuding stacking of useful materia if available. Ordinary rock
149.62
245
36656.14
... More
Earth work in excavation over areas ( exceeding 30 cm in depth, 1.5 mtr in width as well as 10 sqm on plan ) incuding disposal of excavated earth lead up to 50 m and lift up to 1.5 m disposed earth to be levelled and neatly dressed. All kinds of soil
285.65
113
32278.13
... More
Earth work in excavation over areas ( exceeding 30 cm in depth, 1.5 mtr in width as well as 10 sqm on plan ) incuding disposal of excavated earth lead up to 50 m and lift up to 1.5 m disposed earth to be levelled and neatly dressed. Incuding stacking of useful materia if available.
-
-
-
... More
Ordinary rock
316.35
245
77505.75
... More
Hard Rock ( Requiring Blasting ) useful material 30 %
237.2
320
75902.69
... More
Hard Rock ( Blasting prohibited ) useful material 30 %
218.18
526
114763.57
... More
Providing and Laying in position cement concrete including curing compaction etc complete in specified grade incuding the cost of centering and shuttering - All work up to plinth level. Using crusher broken aggregate 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominall size )
40.36
2865
115629.97
... More
Random rubble stone masonry for foundation and plinth in cement sand mortar 1:6 for above 30 cm thick wall
266.9
2890
771339.56
... More
Brick work in superstructure up to third storey with bricks of class designation 75 in : cement mortar 1:6 ( 1 cement : 6 coarse )
200.63
3051
612130.37
... More
Providing and fabricating steel reinforcement for RCC work including straightening, cutting bending, placing in position and binding ( including cost of binding wire ) all complete up to floor three level.Hot rolled deformed bars (IS:1139)
7108.02
70
497561.29
... More
Providing brick kharanja in lime sand mortar 1:2 in square pattern over roof of ground floor. 55 mm to 60 mm thick average
449.18
257
115440.21
... More
Add for if cement mortar 1:4 is used instead of lime sand mortar 1:2
422.91
58
24528.78
... More
Finishing with 25 mm thick cement plaster on roofs in cement sand mortar 1:4 mix including water proofing compound @ 2 % of cement used, with neat cement, finishing curing etc. complete in all respect including making of 300 mm * 300 mm square.
439.93
177
77866.96
... More
P&F 18 SWG MS recessed fan box, hexagonal / round of size 130 mm dia, depth 75 mm, 12 mm dia rod fan hook with 100 mm length extended on each side
19.98
75
1498.5
... More
Half brick masonry in superstructure in cement sand mortar 1:4
35.03
496
17375.69
... More
Random Rubble dry stone kharanja under floor
71.73
619
44399.88
... More
Polished blue kota stone flooring, skirting, laid over 20 mm thick base of CM 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete: For area of each slab from 2001 to 5000 Sq cm.
-
-
-
... More
20 mm thick slab
273.06
772
210802.32
... More
35 mm thick factory grinded stone flooring of approved shade set in pattern over 20 mm thick base of cement mortar 1:6 ( 1 cement : 6 coarse sand ) and jointed with cement sand mortar 1:3 complete in all respect : Kota stone
42.79
477
20411.33
... More
Providing and fixing Ist quality standard white / Ivory /grey, fuma, red brown, light green, light blue, and other light shade glazed tiles of ( confirmimg to IS : 13753 & IS 13622 ) of size 300 mm * 200 mm in walls, floors, steps, pillars, etc laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete ( excluding the cost of cement plaster on walls & pillars )
252.65
617
155883.45
... More
Providing and fixing angle iron frame 25*25*3 mm for ventilators with fixed wire gauge 16 mesh 24 gauge including 100 mm square bars at interval of 100 mm welded screwed to frame with metal beading 20*3 complete in all respect as per design.
19.31
1656
31983.98
... More
Providing and fixing T - iron frames for doors, Windows and ventilators of mild steel Tees sections, joints mitred and welded with 15*3 mm lugs 10 cm long embedded in cement concrete block 15*10*10 cm of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded aggregate 20 mm nominal size ) or wooden plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a proming coat of approved steel primer.
1373.89
100
137389.16
... More
Providing and fixing MS sheet double leaf door shutter in angle iron frame 35*35*5 mm suitabilly diagonally braced with 25*3 mm flat iron above and below lock rail of size 50*5 mm beading extra including all fittings, as per direction of Engineer In Charge but excluding cost of chaukhats, including two coats of anti- corrastie red oxide primer paint.MS sheet 18 SWG
167.27
1761
294555.25
... More
finishing wall with water proofing paint of approved brand and manufacture and / or required shade to give an even shade including all scaffolding New work ( three or more coats )
671.26
56
37590.65
... More
Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade: New steel work ( two or more coats )
324.74
37
12177.82
... More
Construction of Septic Tank in all type of soil with 40 cm thick masonry in CM 1:6, 15 cm thick CC bed of 1:5:10, M-15 grade CC flooring & over stone slab covering 80 mm thick slab jointing in CM 1:3 ranthal, kharanja, 50 mm thick stone partition walls, 20 mmm thick plaster in CM 1:6 finished with neat floating cement, 4 nos. CI foot rests of approved design two no. 450 mm dia 25 kg each CI cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr, Size 200 * 100 * 130 cm ( for 10 users )
6.66
23375
155677.5
... More
Construction of open surface drain with 112 mm thick brick masonry in CM 1:4,110 mm thick base concrete 1:5:10, 37 mm thick M-15 grade CC flooring 12 mm, 1:4 cement plaster on all exposed faces of walls including top surface excavation & disposal of earth within a lead of 50 mtr complete as per approved design / drawings: 112 mm drain 225 mm Av. Depth
113.22
454
51401.88
... More
P&F Indian type white glazed vitreous china Ist quality WC Orissa Pan (IS:2556 mark) with 100 mm vitreous china P or S trap including cutting and making good the wall & floor. Size 530*410 mm
6.66
1575
10489.5
... More
P&F European type white glazed vitreous china Ist quality double syphonic WC Pan ( IS:2556 mark ) with P or S trap including cutting and making good the wall & floor.
6.66
3748
24961.68
... More
P & F Low level Flushing Cistern of 10 litres capacity ( IS:2556 mark ) of approved make with complete fittings CI brackets duly painted, brass ball cock with ball, ( IS:1703 mark ) complete including cutting and making good the wall: PVC with CP brass long bend.
6.66
1373
9144.18
... More
P&F WVC wash basin ( Ist quality, IS:2556 mark ) of approved make with CI brackets duly painted, 1 no. 15 mm CP pillar cock ( IS:8934 mark ) & 32 mm CP brass waste coupling of approved make, 25 mm dia GI waste pipe complete including cutting & making good the wall: Size 510 mm * 400 mm
9.99
1749
17472.51
... More
P&F Kitchen & Lab sink of approved make with CI brackets duly painted, 40 mm CP waste coupling, CP brass chain with rubber plug, 40 mm GI waste pipe up to floor level complete including cutting and making good the wall & floor: 1.0 mm thick salem stainless steel AISI - 304 kitchen sink of approved make ( Nirali, Neel-Kanth, Jaina, Faber, Crystal ) with large waste coupling Overall sizes ( Inches ) 24 * 18 * 8 Bowl sizes ( Inches ) 20*16*8
3.33
4230
14085.9
... More
P&F PVC pipe fittings ( IS : 4985 mark ) of approved quality / make including jointing the pipe with solvent cement rubber ring and lubricant:
-
-
-
... More
Coupler ( Socket )
33.3
89
2963.7
... More
Bend 450
16.65
102
1698.3
... More
Vent Cowl
16.65
53
882.45
... More
Pipe Clip
16.65
39
649.35
... More
P&F Bib cock ( IS:8931 mark ) superior quality of approved make CP Brass bib cock, 15 mm nominal bore
9.99
788
7872.12
... More
P&F B Class GI pipes ( Internal work ) with GI fittings ( IS:1239 mark ) & MS clamps including cutting and making good the wall and floors:Exposed on wall
-
-
-
... More
15 mm nominal dia ''A' Class
99.9
172
17182.8
... More
25 mm nominal dia ''A' Class
49.95
258
12887.1
... More
P&F B Class GI pipes ( External work ) with GI fittings ( IS:1239 mark ) including trenching & refilling earth etc. 15 mm nominal dia
66.6
177
11788.2
... More
P&F Tooth paste & brush holder of approved quality / make: stainless steel
9.99
205
2047.95
... More
P&F soap dish or tray of approved quality / make. CP Brass ( heavy & superior quality )
9.99
86
859.14
... More
Providing and fixing Anodised Aluminium Curtain rod with Aluminium brackets. 20 mm
66.1
56
3701.66
... More
Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade ( IS:694 ) of approved make in surface / recessed ISI marked MMS ( IS:9537 P-III ) PVC conduit & its accessories, round tiles, 18 SWG MS box with earth terminal , Screwless cage connectors for neutral looping in swith board & false ceiling point, 6 A switch, 3.0 mm thick ISI marked phenolic laminated sheet, Zinc plated / brass screws, cup washers, making connections, testing etc as required.
-
-
-
... More
Short point ( Up to 3.0 mtr )
66.6
219
14585.4
... More
Medium point ( Up to 6.0 mtr )
16.65
305
5078.25
... More
Long point ( Up to 10.0 mtr )
16.65
421
7009.65
... More
Wiring of 3 pin 5 amp light plug point with 1.5 sq mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade ( IS:694 ) of approved make in surface / recessed ISI marked MMS ( IS:9537 P-III ) PVC conduit & its accessories, 18 SWG 175 mm x 100 mm x 60 mm MS box with earth terminal , Screwless cage connectors for neutral looping in swith board , 6 A switch, 6 A Socket, 3.0 mm thick ISI marked phenolic laminated sheet, Zinc plated / brass screws, cup washers, making connections, testing etc as required.
-
-
-
... More
On Board
66.6
79
5261.4
... More
Medium point ( Up to 6.0 mtr )
19.98
374
7472.52
... More
Long Point ( Up to 10.0 mtr )
13.32
517
6886.44
... More
S&F of power plug ponit accessories on 18 SWG metal box of size 175 * 100 * 60 mm on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket out let making connection, testing etc as required.
16.65
199
3313.35
... More
P & F 240 / 415 V MCB of breaking capacity not less than 10 KA ( B / C / D tripping characteristic ) ISI marked IS 8828 ( 1996 ) confirming to IEC 60898 in existing board / sheets including making connections with lugs, testing etc as required. Single pole MCB 6 A to 32 A rating
39.96
161
6433.56
... More
P & F 240 / 415 V isolator confirming to IS:1497 - III / IEC 60947 - 3 on existing board / sheet including making connections with lugs, testing etc as required. 30 A / 40 A rating
3.33
354
1178.82
... More
P&F Recessed / surface mounting heavy duty vertical type 16 SWG sheet steel Distribution board with provision of incomer suitable for MCB / RCCB and SP / TP MCB as out going phophatised / powder painted complete with insulated suitable rating copper bus bar, neutral link earth link, and din bar, masking sheet confirming to IS:13032 & IS:8623 including making internal DB terminations with copper lugs, testing etc. as required. Single door ( Single phase ) 4 way
3.33
4746
15804.18
... More
Plate earthing as per IS:3043 with GI Earth plate of size 600 mm * 600 mm * 6.0 mm by embodying 3 to 4 mtr below ground level with 20 mm dia GI B class watering pipe including all accessories like nut, bolt, reducer, nipple, wire meshed funnel and CC finished chamber covered with hinged type with locking arrangement CI Cover, CI frame of size 300 mm * 300 mm complete with alternate layers of salt and coke / charcoal, testing of earth resistance as required
3.33
2800
9324
... More
P / Laying XLPE / PVC insulated & PVC sheathed cable of 1.1 kV grade with aluminium conductor of IS:7098-I / 1554 P-I of group 1 of approved make in ground as per IS:1255 including excavation of 30 cm * 75 cm size trench, 25 cm thick under layer of sand, II class brick covering, refilling earth, compaction of earth, making necessary connection, testing etc as required of size 4.0 sq.mm 3 core
66.6
131
8724.6
... More
P&F double ball bearing capacitor start aluminium body & blade Ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required ( Group 1 ) 1200 mm sweep
13.32
1481
19726.92
... More
P&F of heavy duty capacitor start, double ball bearing 900 /1400 RPM single phase ISI marked Ehaust fan IS:2312 marked in existing opening including making connections testing etc as required.( Group 1 ) 300 mm sweep ( 900 /1400 RPM )
9.99
2369
23666.31
... More
P&F IP - 43 protected street light luminaire on existing bracket suitable for FTL/T5 lamps,housing made out from stove enamel painted alluminium alloy, stove enamel painted CRCA sheet canopy reflector cum contorl gear tray , UV stabilized clear ribbed acrylic diffuser held with synthetic gasket, min. 6 nos. of toggles for securing acrylic cover with housing with all necessary accessories. ( low loss copper choke, starter, starter seat ) / electronic choke with terminal block duly prewired with copper conductor including making connection, testing etc as required ( without tube ). 1x36 watts
13.32
1171
15597.72
... More
S&F of street light bracket made out from following size of 'B' class GI pipe with heavy duty pole clamp, saddles suitable fastnrs etc as required. 32 mm dia.
6.66
271
1804.86
... More
P&F strip type fluorscent tube fitting fabricated from CRCA sheet and finished with powder coating / stove enamelled paint / extruded non corrosive UV resist EP channel complete with accessories ( low loss copper choke, starter, starter seat ) / electronic choke with terminal block duly prewired with copper conductor including making connection, testing etc as required ( without tube ). 1x36 watts with OCCB
26.64
277
7379.28
... More
P&F fluorescent tube rod in existing fixtures as required minimum 3 star rating 36 / 40 watts
26.64
36
959.04
... More
Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods watering, rolling each layer with 1/2 tonne roller, or stone or steel rammers and rolling every 3rd and top- most layer with power roller of minimum 8-10 tonne capacity and dressing up in embankment for roads, flood banks marginal banks and guide banks or filling up ground depressions, lead up to 50 Mtr. and lift up to 1.5 Mtr.:
All kinds of soil
-
-
-
... More
upto 1.5 mtrs
4335
138
598230
... More
Supply, Installation, Testing and commissioning of copper wound ISI marked Transformer 11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories like, conservator, Silicagel breather, radiator, fins, HT & LT cable end boxes or Bus Duct flange, Lifting lugs, Bi-directional Plain/ Flanged Rollers,Earthing terminal,Air relaese plug.Off load tap changer (+5% to -10% in steps of 2.5%), winding / Top oil temperature rise of 45°C/40°C, ISI marked drain valves, Dial type temperature gauge, first fill oil, Epoxy based paint etc having max. total losses as per energy efficiency level - 2 at basic Insulation level conforming to IS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 BEE star level - I as per Govt. of India, Ministry of power notification Dated 16th Dec., 2016. Transformers described as above and as per the following continuous rating
-
-
-
... More
160KVA
4
402113
1608452
... More
200KVA
2
488280
976560
... More
250KVA
4
552906
2211624
... More
315KVA
4
646253
2585012
... More
400KVA
6
804227
4825362
... More
Providing and laying XLPE/PVC insulated & PVC sheathed armoured control cables of 1.1 KV grade with copper conductor as per IS 1255 including excavation of 30 CmX75 Cm size trench 25 Cm thick under layer of sand and second class bricks covering, backfilling & compaction
-
-
-
... More
3C x 2.5 sq.mm
1000
176
176000
... More
4C x 2.5 sq.mm
640
202
129280
... More
14 C x 2.5 sq.mm
640
547
350080
... More
8C x 2.5 sq.mm
2000
329
658000
... More
Supply , Installation, Testing and Comissioning of Outdoor / Inddor Fix Type ICOG 11 KV, 630A, 20 KA / 1 Sec. HT VCB Panel with AL. Bus bar. comprising of 11KV FIXED TYPE VCB,630A, 20 KA with associated Protection duly fabricated with 2/1.6 mm CRCA Sheet, powder coated, Colour RAL 7032/35/AR complete with hardware and instruments duly wired & tested with stand structure. Protection Class: IP5X. Incoming cum Outgoing facility (ICOG). Suitable for Indoor & Outdoor Application (IP 54).Panel with approved make Fix Type VCB 630A, suitable for 30000 Operation. This Panel having Voltage Presence Indications. Panel having Protection O/C, S/C & E/F Relay with RS 485 Communication Port. Panel having Protection for WTI, OTI & BZ. Panel having Annunciation Window for visual & Hooter.Panel having Lifting Facility (4 Lifting Hooks). Panel having Stand Structure (500 mm) in Bottom for easy Installation & Cable Termination. For Control Supply One Power Pack with battery backup provided for continuous control supply. Required Protection (MCB,s) & Indication are provided. PLC & SCADA compitible.
20
400000
8000000
... More
SITC of battery bank of min 150 AH capacity comprising SMF/VRLA batteries , MS / Teakwood battery stand , interconnect wiring etc as required complete in all respect of rating:
-
-
-
... More
110VDC
10
218208
2182080
... More
SITC of FCBC ( Float cum boost charger)suitable for 415V +/-10%, 50 Hz , 1-ǿ / 3 -ǿ Input & 24/ 48 /110 V DC OutputNatural Cooled, free standing in Sheet Steel enclosure,SCR controlled , regulation +/-1% , Efficiency 75% on FLAC/ DC Instruments, Selector Switch ,Built in DC Distribution Board (6 No MCB), indication , control as required of following rating:
-
-
-
... More
25 A + 25 A
30
90993
2729790
... More
Earthing Schedule Plate Earthing as per IS:3043 with copper Earth plate of size 600mm x 600mm x 3.0mm by embodying 3 to 4 mtr. below the ground level with 40 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer, nipple ,wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required.
100
5500
550000
... More
Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required.
281
3000
843000
... More
S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.
-
-
-
... More
50mm x 6mm copper strip
500
1966
983000
... More
50mm x 6mm G.I. Strip
1000
185
185000
... More
32mm x6mm G.I. Strip
500
117
58500
... More
25mm x 3mm G.I. ( Hot Dipped ) Strip
6990
49
342510
... More
Providing & Laying XLPE insulated IS:7098/II/85 of approved make H.T.cable for working voltage 11 K.V.Un-Earthed with Stranded Compacted Circular Aluminium Conductor, Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated, Insulation Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanised flat steel strip armoured and overall Extruded PVC Type ST-2 Outer Sheathed cable direct in ground including excavation of 30cmx100cm size trench, 25cm layer of river sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection testing etc.as required of size.
-
-
-
... More
3 core 120.0 Sq.mm
1500
1139
1708500
... More
Providing & making heat shrinkable type indoor/outdoor/straight through terminations/joint kit of approved make suitable for XLPE insulated 11 KV cable, with required components, prepration of cable ends,testing etc. as required of following sizes .
-
-
-
... More
Indoor
-
-
-
... More
3 core 120/150/185 Sq.mm
60
5429
325740
... More
Outdoor
-
-
-
... More
3 core 120/150/185/225 Sq.mm
40
7504
300160
... More
Providing & Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection,Complete as per technical specifications and as directed by Engineer in charge.
-
-
-
... More
10 SQMM, 3.5 CORE
640
173
110720
... More
70 SQMM, 3.5 CORE
400
410
164000
... More
120 SQMM, 3.5 CORE
200
602
120400
... More
120 SQMM, 3.5 CORE
400
602
240800
... More
300 SQMM, 3.5 CORE
800
1257
1005600
... More
300 SQMM, 3.5 CORE
1200
1257
1508400
... More
4.0 SQMM, 3.5 CORE
8330
131
1091230
... More
10.0 SQMM, 3 CORE
200
161
32200
... More
16.0 SQMM, 3 CORE
1260
161
202860
... More
25.0 SQMM, 3 CORE
500
207
103500
... More
35.0SQMM, 3 CORE
400
242
96800
... More
95.0SQMM, 3 CORE
800
454
363200
... More
185.0SQMM, 3 CORE
300
738
221400
... More
Supply, Fabricating & installing following sizes of ladder type cable trays with rungs at span of 250 mm including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/wall with suspenders and including painting as required.
-
-
-
... More
Hot Dipped Galvanized
-
-
-
... More
450mm x 50mm x 2.0mm
250
468
117000
... More
600mm x 50mm x 2.0mm
250
526
131500
... More
Supply, Fabricating & installing following sizes of perforated cable trays including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling with suspenders and including painting as required.
-
-
-
... More
Hot Dipped Galvanized
-
-
-
... More
100mm x 50mm x 1.6mm
500
265
132500
... More
150mm x 50mm x 1.6mm
500
333
166500
... More
300mm x 50mm x 1.6mm
500
518
259000
... More
450mm x 50mm x 2.0mm
250
867
216750
... More
Providing & Fixing of Electrical insulating rubber matts as per PWD specification for electrical Works, ISI marked confirming to IS: 15652 /
2006 with one side anti skid abberation marks and pasting the matwith synthetic rubber adhesive as required. All as per pre approved by
Engineer in charge. For additional technical parameters of products/work , refer Annexure "A" attached with this BSR . 11 KV, 2.5 mm thick with proof voltage 22 KV / 3 min. and Break Down Voltage 45 KV
100
1895
189500
... More
415 V LT Panel SITC of floor mounted PMCC (Indoor, Dust proff IP-4X front operated with 2 mm thick sheet metal ompartmentalised) with all accessible parts, head shrinkable sleeves, SMC/DMC bus bar supports, padlocking facility on outgoing feeders etc.
-
-
-
... More
Incommer feeder (drowout type )for transformer 630A/800A, 50KA, ACB 3 pole, Al Bus Bars,Digital Multifunction meter compatable to SCADA,metering,Protection CT's, IDMT 3-O/C & 1-E/F, indicating lamps, control fuse, wiring etc.complete in all respect of the size appxo 900(D)X.2400(H)X1000(D)
6
254057
1524342
... More
Bus Coupler Feeder (drowout type ), 630/800 A ACB, 50KA, 3 Pole without release with Al Bus Bars, Indicating Lamps, Control Fuses and wiring etc. complete in all respect. Size : 900(W) x 2400 (H) x 1000 (D)
3
218208
654624
... More
400 A MCCB Incomer (Fixed type ) with metering CTs, multi fuction meter compatible to scada, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect. Size:900(W)X600(H)X1000(D)
15
60007
900105
... More
250 A MCCB Incomer (Fixed type ) with metering CTs, multi fuction meter compatible to scada, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect. Size:900(W)X600(H)X1000(D)
6
52993
317958
... More
MCCB up to 100A (Fixed type ) as outgoing CT's, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect.Size: 600(W)300(H)X1000(D)
65
33511
2178215
... More
MCCB up to 100A (Fixed type ) as outgoing CT's, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect.Size: 600(W)300(H)X1000(D)
20
33511
670220
... More
MCCB up to 100A (Fixed type ) as outgoing CT's, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect.Size: 600(W)300(H)X1000(D)
10
33511
335110
... More
MCCB up to 100A (Fixed type ) as outgoing CT's, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect.Size: 600(W)300(H)X1000(D)
10
33511
335110
... More
400 A MCCB (Fixed type ) as outgoing CT's, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect.Size: 900(W)X900(H)X1000(D)
5
42609
213045
... More
250 A MCCB (Fixed type ) as outgoing CT's, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect.Size: 900(W)600(H)X1000(D)
3
43642
130926
... More
160 A MCCB (Fixed type ) as outgoing CT's, Ampermeter with SS, Voltmeter with SS, Indicating Lamps, Control Fuse, wiring etc. complete in all respect.Size: 600(W)600(H)X1000(D)
2
36628
73256
... More
SITC of Soft Starters with panel supplied by manufacturer conforming to applicable standards with logic inputs & outputs, relay outputs and analogue outputs, plug in I/O connections, display of electrical parameters, state of load & operating time, RS 485 serial link for connections to Modbus.
-
-
-
... More
75KW
15
154718
2320770
... More
160KW
6
277436
1664616
... More
From 3.3 KW to 7.5 KW DOL Starter Feeder with MCB,Main and Aux Contactor,O/L Relay,L/R Selector Switch,3 Indicating lamps,Start-Stop Push Button ,Control MCB (Size : 600 (W) x 400 (H) x 600 (D)
2
20262
40524
... More
S & F of Star delta Starter with MCB,Main and Aux Contactor,O/L Relay, L/R Selector Switch,3 Indicating lamps,Start-Stop Push Button ,Control MCB with panel with all accessories with following rating
-
-
-
... More
11 KW
12
10211
122532
... More
15KW
10
11417
114170
... More
18.5KW
8
11417
91336
... More
22 KW
2
18784
37568
... More
30KW
8
30163
241304
... More
37KW
2
30163
60326
... More
433V APFC Panel in cubicle made of CRCA sheet steel of minimum 2.5/2.0/1.6 mm thickness, comply with latest IEC 61439-1-2020, totally enclosed Operational on 3 Phase 415 voltages, 50Hz, neutrally grounded, IP 55, The cubicle panel shall be vermin proof and dust-tight and shall be of compartmentalized type construction, nine tank pre-treatment process before powder coating, Paint Shade – Grey RAL 7032, gasket material- neoprene, AC/DC/CT wiring – 1.5/2.5sqmm PVC insulated multi strand Copper flexible wire, Heat shrinkable Colour coded PVC bus bar sleeves, cable entry Incoming – bottom and outgoing – Bottom as per requirement. The switchgears and control gears complete with all necessary supporting framework, nuts and bolts, Aluminum Bus Bar. The Indoor APFC Panel switchesgear (Air circuit breakers, MCCB, CTs, etc) and control gear (Microprocessor based APFC 8/12 Stage relays, APFC Duty Contactors, auxiliary contacts, Space heater and lighting, Digital A & V meters with Selector Switch, Phase Indications, Hooter, plug socket etc.) shall be mounted on the same panel Complete as per technical specifications and as directed by Engineer in charge.
1320
2200
2904000
... More
SITC of Local Push Button station fabricated with 16 SWG CRCA sheet, painted with polyster Powder coated finish after chemical treatment with Folliwng items and accessories:- i Shrouded Type push button with 2 NO Contacts element for Start/forward-reverse. ii Lockable Mushroom head type push buuton with 2 NC Contact element. iii 2.5 Sqmm clipon type terminals as requried with 20% spares. iv 1.5 Sqmm PVC insulated felxible copper wire with lugs & ferrules as requried.
-
-
-
... More
Local Push Button Station
65
2026
131690
... More
Supply and erection of Octagonal pole of following length and dimension as per table-3 with base plate on the cement concrete foundation of M-15 /M-20 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS 1367 P III ). The pole shall be made of S-355JO grade steel sheet , folded lengthwise to obtained Octagonal shape, having single longitudinal seam weld and hot dipped galvanised internally & externally in accordance with IS 2629. The pole shall have a weatherproof flush door and locking arrangements. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning.
-
-
-
... More
7 Mtr.
80
15962
1276960
... More
Supply, Erection and Fixing of hot dipped galvanised Overhang (60 X 3.25 mm) with cap (250 x 137.9 x 4.05 mm) over the poles
-
-
-
... More
Single arm overhang
80
1382
110560
... More
P/ F IP-65/ IP-66 protected street light luminaries on bracket / Arm. Fixture made from powder coated single piece pressure die cast aluminum housing with heat dissipation fins on housing with high power LEDs . Diffuser / glass cover for ensuring IP-65 protection for lamp and control gear compartment, system lumen output of 100 lum/watt high power LED. Integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to IEC standards. System life of 50000 burning hours with 70 % of initial lumens maintained. Fixture shall be in CE compliance. IP-65 protected LED street light luminaries
-
-
-
... More
LED street light fixture 80-90 watt
80
8313
665040
... More
P & F IP -65 protected integral flood light luminaire suitable for HPSV/ Metal halide lamp comprising of powder coated die cast aluminium housing, electrochemically brightened and anodized stippled aluminium reflector, covered with suitably gasketed heat resistant and toughened glass, porcelain holder, integral control gear box having copper ballast, capacitor, electronic ignitor prewired with pvc insulated copper conductor up to terminal block including making connection testing etc.
-
-
-
... More
1 X 250 Watt
40
5313
212520
... More
P & F High pressure sodium vapour/ High pressure mercury vapour/ Metal halide/ Halogen lamp as required. HPSV tubular lamp normal output.
-
-
-
... More
250 Watt
40
261
10440
... More
From 3.3 KW to 7.5 KW DOL Starter Feeder with MCB,Main and Aux Contactor,O/L Relay,L/R Selector Switch,3 Indicating lamps,Start-Stop Push Button ,Control MCB (Size : 600 (W) x 400 (H) x 600 (D)
20
20262
405240
... More
Heavy Duty AL & CU Lugs, Double Compression Cable Gland with Nickel Plated, Cable Tie, Cable Tags, GI Nut- Bolts-Washers, Anchor Fastners, Clamps, Clips, Screw, Electrical Taps, HT Tap, Danger Plates, First Aid box complete with all standard medical , 4.5 Kg. CO2 type portable fire extinguisher , Fire buckets with floor / wall mounting stand ect. required hardware & accessories for various sizes as per requirements.
10
100000
1000000
... More
SITC DOL Starter type LT Panel of following rating, all switchgears are of PHED approved makes, CRCA sheet of Panel enclosure is of TATA/ Essar 1.6mm/ 2.0mm thick duly Electrostatic Powder Coated with angle frame including other ancillaries ( Insulators, Acrylic Sheet , Baklight Sheet, Hardware, Wire, Name Plates, Lugs, Pvc Channel , Mcb Chanel , Lock, Hing , Bidding , Connectors, Netural Links , Sprial , Saddle & Packing Material ) etc. complete as per Technical Specifications and as per direction of Engineer-In-Charge.
-
-
-
... More
DOL STARTER 2.2 KW (3 HP)- : For 2 motors (1 W+ 1S) I/C - MCB 25A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 30/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and O/G- MCB 16A ,TP, 10 KA, C Curve (2), Power Cont 9A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (4-6A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Priventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 2 Kvar (2)
3
45061
135183
... More
DOL STARTER 3.7KW (5 HP ) - : For 2 motors (1 W+ 1S) I/C - MCB 32A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 30/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and O/G- MCB 25A ,TP, 10 KA, C Curve (2), Power Cont 12A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (7-10A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Priventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 2 Kvar (2)
4
46171
184684
... More
DOL STARTER 5.5 KW (7.5HP) - : For 2 motors (1 W+ 1S) I/C - MCB 40A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 30/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and O/G- MCB 25A ,TP, 10 KA, C Curve (2), Power Cont 12A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (7-10A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Priventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 2 Kvar (2)
1
47001
47001.05
... More
SITC STAR DELTA Starter type LT Panel of following rating: all switchgears are of PHED approved makes, CRCA sheet of Panel enclosure is of TATA/ Essar 1.6mm/ 2.0mm thick duly Electrostatic Powder Coated with angle frame including other ancillaries ( Insulators, Acrylic Sheet , Baklight Sheet, Hardware, Wire, Name Plates, Lugs, Pvc Channel , Mcb Chanel , Lock, Hing , Bidding , Connectors, Netural Links , Sprial , Saddle & Packing Material ) etc. and 100A/ 125A ,TPN, Aluminum Bus Bar with Colour coated heat shrinkage sleeves complete as per Technical Specifications and as per direction of Engineer-In-Charge.
-
-
-
... More
STAR DELTA STARTER 7.5 KW (10.0 HP) - : For 2 motors (1 W+ 1S) I/C - MCB 63A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 60/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and O/G- MCB 32A ,TP, 10 KA, C Curve (2), Power Cont 18A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (7-10A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Preventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 5Kvar (2), S/D Timer(2)
4
61768
247072
... More
STAR DELTA STARTER 11.0 KW (15.0 HP) - : For 2 motors (1 W+ 1S) I/C - MCB 63A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 60/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and O/G- MCB 40A ,TP, 10 KA, C Curve (2), Power Cont 25A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (9-13A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Priventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 7.5Kvar (2), S/D Timer(2)
2
64153
128306
... More
STAR DELTA STARTER 15.0 KW (20.0 HP) : For 2 motors (1 W+ 1S) I/C- MCCB 100A TPN 25 KA With T/M Based Over Current & Short Circuit Protection (1),Spreaders (2),Extended Rotary Handle (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 100/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and O/G- MCCB 63A TPN 25 KA With T/M Based Over Current & Short Circuit Protection (2), Power Cont 32A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (12-18A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Priventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 7.5Kvar (2), S/D Timer(2)
2
91403
182806
... More
Design, manufacture, supply, installation, testing and commissioning of indoor type PLC panel of size approx. 1100 mm X 700 mm X 2100mm (LBH) , fabricated out of min. 2 mm thick CRCA sheet complete with latest configuration PC, necessary programming for SCADA software and comprising of all accessories not limited to the following: DI –92 num DO – 92 num AI –16 num AO – 8 num MCB 10A DP – 1 num MCB4ADP – 2 num MCBSP2A – 8 num MCB 1A DP – 15 num 24 VDC Power Supply 10A – 1 num Push Buttons – 30 num Selector Switch - 15 num Control Relays – 200 num Annunciator with 24 Windows NO to NC Type Microprocessor Based, Window Size 75*42mm, 110VAC, with Electronic Hooter – 1 num Control Transformer – 1 num Emergency PB – 1 num Panel Cooling Fan – 1 num Panel Light with Door Switch – 1 num Control Indication Lamp – 30 num Wiring + TB etc – 1 lot Hardware – 1 lot
10
1552591
15525910
... More
Design, manufacture, supply, installation, testing and commissioning of indoor type PLC panel of size approx. 1100 mm X 700 mm X 2100mm (LBH) , fabricated out of min. 2 mm thick CRCA sheet complete with latest configuration PC, necessary programming for SCADA software and comprising of all accessories not limited to the following: DI – 60 num DO – 60 num AI – 8 num AO – 4 num MCB 10A DP – 1 num MCB4ADP – 2 num MCBSP2A – 8 num MCB 1A DP – 15 num 24 VDC Power Supply 10A – 1 num Push Buttons – 20 num Selector Switch – 10 num Control Relays – 200 num Annunciator with 24 Windows NO to NC Type Microprocessor Based, Window Size 75*42mm, 110VAC, with Electronic Hooter – 1 num Control Transformer - 1 num Emergency PB – 1 num Panel Cooling Fan – 1 num Panel Light with Door Switch – 1 num Control Indication Lamp – 20 num Wiring + TB etc – 1 lot Hardware – 1 lot
8
1252882
10023056
... More
HMI Display, Colour, 12" having Ethernet Port, USB Port ect.
10
154000
1540000
... More
Operator Station PC SET includes, Core i5 processor, 8 GB DDR-3 RAM, 1TB SSD, DVD RW Drive, RS-232/485 Ports, 1 Parallel Port, 4 nos. USB Port, 2x Ethernet Cards, Keyboard, optical mouse, 32'' LED monitor, Latest Original window, MS Office, Anti Virus ect.
10
165000
1650000
... More
Quad-band GSM/GPRS modem with Ethernet bridge/ router/ serial server (RS232/485) interface.
26
117918
3065868
... More
Providing, installation, testing and commissioning of UPS, 3Phase 415 V, 50 Hz with 60 min back up Ni+Cd battery bank.
-
-
-
... More
2KVA
10
298726
2987260
... More
1.5 Tons Split Type Air Conditioners with auto switch over circuit
10
73895
738950
... More
Providing and laying Stranded/ Flexible Annealed Bare copper conductor ,XLPE/PVC insulated suitably laid up together overall polyester taped Al (inner sheeted GI Steel wire Mylar/Drain wire) along with ATC drain wire , round/steel Armoured overall PVC sheathed (ST-1) overall screened Core Armoured instrumentation Cables generally confirming to PAS 5308- Part-2-2009.
-
-
-
... More
1 SQMM, 12 Core
500
207
103500
... More
1 SQMM, 24 Core
1050
334
350700
... More
Providing and laying Stranded/ Flexible Annealed Bare copper conductor ,XLPE/PVC insulated suitably laid up together overall polyester taped Al (Mylar tape wrapped) along with ATC Drain wire overall PVC sheathed (ST-1) overall screened Pair Armoured instrumentation Cables generally confirming to PAS 5308- Part-2-2009.
-
-
-
... More
1 SQMM, 1 Pair
9800
98
960400
... More
Providing and laying XLPE/PVC insulated & PVC sheathed Armoured control cables of 1.1 KV grade with copper conductor as per IS 1255 including excavation of 30 CmX75 Cm size trench 25 Cm thick under layer of sand and second class bricks covering, backfilling & compaction.
-
-
-
... More
4C x 2.5 sq.mm
2550
202
515100
... More
4C x 1.5 sq.mm
2550
152
387600
... More
Providing, Installation, Testing and Commissioning of ULTRASONIC LEVEL TRANSMITTER for Water Application : Principle : Time of Flight / Sensor MOC PP / Process Connection 1 1/2 inch BSP or 2 inch BSP Threaded type / Power Supply: 24 V DC / Output: 4- 20mA / Display: Integral display for programming and Display Reading / IP 66
-
-
-
... More
0-5M
127
62890
7987030
... More
Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range: 0-10 Bar / Power Supply: 24 V DC / Output: 4-20 mA with HART / Diaphragm: SS316L / Process Connection: 1/2 "NPT (M) / Accuracy: 0.15% Protection: IP67
-
-
-
... More
1/2" M (NPT)
65
70751
4598815
... More
Providing, installation, testing and commissioning of Diaphragm Type Pressure Gauges Dial size 150 mm glycerin filled shatterproof glass, Over range protection: 125% of maximum pressure, Material of sensor and other wetted parts: SS type 316, Housing material: Die cast aluminum
48
7075
339600
... More
Providing, installation, testing and commissioning of Diaphragm type Pressure Switches Sensing Element: Bellows / Diaphragm, Material of sensor and other wetted parts: SS type 316, Housing: Die cast aluminum, Switch type: Microswitch, Repeatability: ± 1% of span, Switch Contacts: 2 NO + 2 NC
32
6603
211296
... More
Providing, installation, testing and commissioning of Level Switch ( Conductivity) Conductivity Probes: (i) Rigid for lengths of up to 3 meters (ii) Flexible for lengths above 3 meters (Rigid probes preferred), Probe insulation: Teflon, Probe head protection class: IP 65 of IS 13947 Part I, Probe head housing material: Aluminum
10
31445
314450
... More
Providing, installation, testing and commissioning of Capacitance Level Transmitter for tank /sump level Accuracy: ±1.5 % of span, Probe type: Rod, Probe material: SS type 316, Weather Protection Class: IP 65 of IS 13947 Part I, Output: 4-20 mA DC (Isolated), Material of wetted parts: SS 316, Probe insulation material: Teflon, Stilling pipe: SS type 316 with perforations
10
70751
707510
... More
Providing, Installation, Testing and Commissioning of CHLORINE ANALYSER for Water Application: Transmitter : Range: 0.05 to 20 ppm, Power Supply 230 VAC, Input: 2 Digital Sensors - one for chlorine and second for pH, Output: 4-20mA HART, IP66/67 Protection / Tx protection cover required / Sensor Range 0-14 pH , able to transmit digital signal to transmitter, calibration data can be transferred to Transmitter , process temp: 65 deg cen/ Sensor range:0.05 to 20 mg/l
-
-
-
... More
0.05 -20 mg/l
10
407997
4079970
... More
Supply of GSM /GPRS based data transmitter / Data Logger for Bulk Flowmeter installed at VTC Inlet side (woltman Pulse Output only ), Battery Powered -7.4V, battery life 3-5 Years, (1 no Data transmit in a day), 4-20mA From Pressure RS485 Display-16*2 LCD, Encloser-165*120*65 mm, ABS Protection-IP65, Operating tempreature -55 Deg. C
295
32500
9587500
... More
Modular RTU for ESR complete with DI, DO, AI and modbus communication ports and power supply 24 VDC or for variable power supply using batteries, rechargeable batteries, solar or 10.8 V DC to 28.8 V DC with VPN modem (3G/4G/5G) ; connection to control center via Tele Control Basic, DNP3, IEC60870-5-104 and Communication protocols, on-board I/Os min. (8 DI, 4 DQ, 2 AI), configuration and diagnostics per web interface, RJ45 port, mobile communications antenna (GSM/UMTS), Mini SIM card, with adapter Micro SIM card also, GPRS (Multi-slot Class 10), 35 mm DIN rail mounting, TCP/IP, DNP 3, Open VPN-Client. Panel Enclosure for RTU Location, wall/floor mounted along with wiring and related accessories and arrangement of mounting of RTU, Modem having IP-55 outdoor Protection with canopy. Power supply arrangement shall be Solar Based along with Solar Batteries & Solar Invertors suiatble for applicable. RTU application software (multiusers) shall be provided for pump houses, MCC, and Jal Dhara Commond centre at Jaipur Jal Bhawan.
133
90000
11970000
... More
Supply, installation, testing and commissioning of MNRE approved off Grid Solar Panels with 25 years of Linear Generation warranty, Work includes designing of solar panel area and MS frame and foundation on ground/roof of Pump house or CWR, showing arrangement of panel in available space, installation of PV module on MS frame as per approved design and drawings. Mounting structure shall be suitably design to withstand wind velocity up to 150km/hr. The work shall be executed as per detailed technical specifications, approved drawing and direction of Engineer in Charge. Note: There shall be 5 year service warranty for solar panel and mounting structure and suitable provision shall be included in tender document.
38610
37
1428570
... More
Cost for basic service charges, Administration and Management, running of office, staff quarters, comprehensive Operation, Maintenance and Repairs including Preventive Maintenance, IEC activities as per scope of work, cost of material required for maintenance & repairs, cost of lubricants, saltf for producing chorine, consumables spare parts (if the spare parts supplied to PHED are used in emergency) as per scope of work & items & conditions of contract no, amt will be paid for O&M in DLP
-
-
-
... More
For the 1st year of O&M after DLP
1
12690442
12690442
... More
For the 2nd year of O&M after DLP
1
13324961
13324961
... More
For the 3rd year of O&M after DLP
1
13991209
13991209
... More
For the 4th year of O&M after DLP
1
14690772
14690772
... More
For the 5th year of O&M after DLP
1
15425304
15425304
... More
For the 6th year of O&M after DLP
1
16196556
16196556
... More
For the 7th year of O&M after DLP
1
17006412
17006412
... More
For the 8th year of O&M after DLP
1
17856723
17856723
... More
For the 9th year of O&M after DLP
1
18749538
18749538
... More
For the 10th year of O&M after DLP
1
19687038
19687038
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements