Public Health Engineering Department Tender

(b-13/13.29.1) Depth upto 25 mm.

(b-13/13.28) Guniting damaged R.C.C. slab, beams and columns for strengthebning with cement sand mortar 1:2 (1-Cement:2-sand) including preparing the surface, making 'V' shaped joints, cleaning the reinforcement bars with jet of potable water and drying with compressed air, including cost of centering and shuttering and finishing to match the existing surface etc. complete, including provided M.S. welded mesh to gauge 25 mm x 25 mm framing with average thickness of 25 mm.

(b-9/9.19) Providing and fixing steel gate grating and grills made of angles, tees, square bars of other flats black pipe with hold fast and fittings complete as per design and drawing including cutting and welding and fabrication with priming coat of red oxide.

(b-9/9.31) Supplying and fixing, fixed wire gauge of 14 mesh x 24 gauge of the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150 mm dist

(b-4/4.13.4) Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. TMT bars

(b-12/12.53.1) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade to give an equal shade including all scaffolding :New work (Three or more coat)

(b-13/13.4) Repair to cement plaster in cement mortar 1:6 (1 cement: 6 fine sand) including removal of old plaster in regular shape and white or colour washing

(b-3/3.2) Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to plinth leve

(3.2.1) P.C.C. grade M 25

(phed/1.6.1) Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, owering, laying, aligning, fixing in position at all evel/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per :echnical specifications and direction of Engineer-in-charge.VIS pipe specials upto 600mm dia (with minimum 5mm thickness sheet

(RUIDP 19.34.2.6) Providing, lowering, laying, aligning, fixing in position and jointing in pipe line, C.I. dual plate check valves as per API:594 and API:598 of PN 1.0 rating of following dia (including jointing a nd jointing material), including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer Category "B" (Makes / vendors other then Category "A" will be considered in category “B”).

RISING MAINS (BSR PHED JAIPUR 2019 & PHED JALORE 2014)

(BSR PHED Jalore 1.4) Providing, lowering, laying and jointing in trenches,  standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by butt fusion/ electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply up to 110 mm dia. in coil & above 110 mm dia straight length in 6 M.(PE-80,PN-10)

(1.4.2.2) 110 mm

( BSR Jalore 2014 12.1.1) Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed within a lead of 50 meter for pipe line work. In All kinds of soil.

(RUIDP 19.20.2) Providing, lowering, laying, aligning, fixing in position in pipe line, manually operated CI D/F Sluice valves of approved ma ke (IS: 14846 amended upto date) PN 1.0 class of following dia complete (including jointing and jointing material) including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer

(19.20.2.4) 150 mm

(19.20.2.5) 200 mm

PART 'B'

Distribution Mains (BSR PHED JAIPUR 2019, PWD JALORE 2019, RUIDP 2017, PHED JALORE 2014)

(BSR CE (TM),2019;1.4) Providing, supplying,Lowering and Laying in standard length HDPE pipes of PE-80 PN-6 pipes confirming to IS 4984-1995 (amended upto date) with necessary jointing material like mechanical connection i.e.thred/insert joint/quick release coupler joint/compression fitting joint or flanged joint and speials jointing pipe by butt fusion weilding method,including all taxes(central and local ),transportation and freight charges,inspection charges,loading,unloading charges,staking the same in closed shade duly protecting from sun rays,including cost of labour and material,specials(tee,bend etc)satisfactory hydraulic testing it is complete as per technical specification and direction of engineer-in-charge(excluding earth work)(supply up to 90 mm dia coil and above 90mm dia straight/length in 6 m) Note:Providing and fixing of all requisitie specials as per drawing,design and layout are inclusive in RM measurment of the item and shall not be paid seprate.

90 mm

110 mm

140 mm

(BSR CE (TM),2019;1.1) Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended upto date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.

150 mm

200 mm

Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed within a lead of 50 meter for pipe line work. In All kinds of soil.

ROAD CUTTING AND REPAIRING (BSR PWD 2019)

(PWD ) Demolishing cement concrete including disposal of material within 50 meter lead :

(PWD 14.2.1) 1:3:6 or richer mix.

(PWD 3.2.5) Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to plinth level

1:4:8 (1Cement :4 Course Sand :8 Graded stone aggregate 40 mm nominal size

(3.2.7) FHTC

(BSR 2020 01.23) Providing service connection as per technical specification and standard drawing as per relevant IS Code (amended up to date) from all kind of water mains up to consumer meter/premises (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil including demolishing of cement concrete,WBM, Black top etc. Of all thickness; cutting of CC road/jhiri by using a concrete cutter machine; depositing and refilling of pit &jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 50 meter ; providing & fixing of all fitting duly approved in accordance with ISO/DTR 9080 as per specification for potable water including approved make of MS clamp with saddle piece gunmetal ferrule 4.0 mm (ISI make) , gunmetal NRV (ISI make), valve (IS: 778) and specials with MDPE pipe PE 80 PN 12.5 as per ISO 4427, with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . In addition to the ferrule, an orifice of 4.0 mm dia should also be provided in the service line at the entry point of the consumer's property in such a way that it should be accessible for inspection to VWSC, PHED and any other authority which would like to inspect as and when required. The service line should be laid at least 45 CM below ground level, except in cases of concrete/bituminousroadswhen minimum depth shall be20cm. For detailed specifications of MDPE pipes please refer section "Technical Specifications" of bid document. General specifications of MDPE pipes shall be as under: • The raw material shall be virgin PE 80 Blue compound and comply with the requirements of ISO/Directive of testing material : 9080 with minimum required strength of 8 Kg/sq.cm. • The raw material shall be Food grade quality Pressure rating shall be 12.5 Bar. • The pipes shall bear ISO marking.

(1.23.1) Average length upto 05 mtr 20 mm dia MDPE pipe

(1.23.2) Extra length of 20 mm MDPE pipe including excavation, providing, laying & jointing of service line above 5.00 mtr.

(4.1) Data entry of existing FHTCs in rural area under JJM on website ejalshakti.gov.in; work includes visiting the village for collecting basic data consumers like i.e. Aadhar no/ration card/voter ID/BPL card/ PAN card/driving licence/ passport/ Antyodaya card/mobile no. etc. and entering the details on the above website. The cost also includes computer and operator.