Pradhan Mantri Gram Sadak Yojana Tender
... More
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 5,83,700Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_CERJ_78200_2Bid Award Id
ViewTender No
NIT No. 02/PMGSY/2019-20 ACE PWD Zone, BikanerTender Authority
Pradhan Mantri Gram Sadak Yojana ViewPurchaser Address
-Website
http://http://omms.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Construction of embankment with approved materials deposited at site obtained from roadway cutting and excavation from drain and foundation or other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per MoRD Specification Clause 301.5
405
-
34
... More
Maintenance of WBM road including filling up of pot holes, ruts and rectifying corrugated surface, damaged edges and ravelling as per MoRD specification Clause 1906.
562.5
-
101
... More
Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per MoRD Specification Clause 202 By Mechanical Means Bituminous Courses.
33.75
-
153
... More
Construction of granular sub-base by providing well graded material, in uniform layers on prepared surface and compacting with smooth wheel roller to achieve the desired density complete as per Technical Specification Clause 401 for all lead of granular material (Compacted thickness as specified to be measured). By Manual Means For Grading III Material.
618.75
-
479.1
... More
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per MoRD Specification Clause 405. Using Crusher Broken Aggregate By Manual Means with all lead
56.25
-
1489
... More
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per MoRD Specification Clause 405. Using Crusher Broken Aggregate By Manual Means with all lead
56.25
-
1605
... More
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per MoRD Specification Clause 502 Low Porosity
1080
-
42
... More
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surfaces cleaned with Hydraulic broom as per MoRD Specification Clause 503.
10996.98
-
15
... More
Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per MoRD Specification Clause 508. Case - II By Mechanical Means. Bitumen (VG-30)
10996.88
-
128
... More
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 By Mechanical Means. Case - II : Type B Bitumen (S-65) [Using Crusher Sand]. [VG-30]
10996.98
-
48
... More
Providing and Laying of Interlocking M-30 grade Concrete Block Pavements having thickness 80 mm as per drawings and MoRD Specification Clause 1504with M-30 Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr Edge Blocks.
Category 'C' : Not dentated on any of its faces like Hexagonal, Rectangular, Square shape as per IRC:SP:63-2004.
468.75
-
684
... More
Brick masonry work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202 & 1203. Brick masonry in 1:4 cement mortar.
2.02
-
3589
... More
Plaster on New Surface on Walls in Cement Sand Mortor including racking of joints etc. complete finish 20 mm thick using. 1 Cement : 4 Sand.
17.4
-
164
... More
White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1915.
17.4
-
12
... More
Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 P.C.C. grade M 20 Nominal mix (1:2:4).
0.53
-
4861
... More
Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
1
-
10822
... More
Providing & Erecting Typical Citizon’s Information Board as per approved drawing and Specification of MoRD, made of two M.S. Sheet of 1.6 mm thick each of size 900 mm x 750 mm stiffened by angle iron 25 mm x 25 mm x 3 mm all around the plates and plates fixed on frame of 75 mm dia pipe of 12 SWG sheet [Vertical Post 3050 mm with angle hold fasts and horizontal member 900 mm] to be joined by 5 mm thick M.S. plate at 12 places [65 mm x 50 mm] duly embedded in cement concrete M-15 grade of block of 600 mm x 600 mm x 750 mm size below ground level as per enclosed drawings and as directed by Engineering in charge. All M.S. will be stove enameled on both side. Lettering figuring and border will be with ready mixed Synthetic Enamel Paint of superior quality in required shade and colour etc. complete in all respect. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per MoRD Specifications.
1
-
8712
... More
Providing and fixing of PMGSY logo with definition plate (as per MORD design/drawing) 2mm thick MS plate framed to angle Iron 40x40x6mm including orange luminous colour paint on logo, size of diamand plate 600x600mm definition plate 900x250mm supported on MS post of angle Iron of size 65x65x6mm, 3m long stove enameled paint with hold fastfirmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and MoRD Specification Clause 1700
1
-
2977
... More
Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 600 mm equilateral triangle
6
-
1668
... More
Reinforced cement concrete M-15 grade kilometre stone/local stone of standard design as per IRC: 8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703.
-
-
-
... More
Ordinary Kilometer Stone (Precast)
4
-
1589
... More
200 m stone (precast)
12
-
364
... More
Providing and erecting direction and place identification of semi reflective sign boards as per IRC-67 made of 2 mm thick M.S. Sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70 mm width and required message, letters, figures with reflective tape of engineering grade as per MORD specifications of required shade and colour. Supported and welded on two nos. 47 mm x 47 mm of 12 SWG square tube of 3050 mm height duly strengthened by 25 mm x 5 mm MS flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701 .
3.24
-
3082
... More
Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements.
58
-
532
... More
Providing and erecting typical maintenance information board as per approved drawing and specification of MORD made of MS sheet of 1.6 mm thick of size 900 x 1500 mm stiffened by angle iron 25mm x25mmx3mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 SWG sheet (vertical post 3050mm with angle hold fasts and horizontal member 900mm) to be joined by embedded in cement concrete M15 grade of block of 600mm x600mm x750 mm size below ground level as per enclosed drawing and as directed by engineer in charge. All MS will be stove enamlled on both sides llettering figuring and borders will be with ready mixed synthetic enamelled paint of superior quality in required shade and colour etc. complete in all respect.All section of framed post and steel tube will be painted with primer and two coats of epoxy paint as per drawing and as per MORD specification.
1
-
8667
... More
Bikaner -SriGanganagar Bye Pass to Nagasar Sugani Km 0/0 to 7/0
-
-
-
... More
Clearing grass and removal of rubbish up to a distance of 30 m outside the periphery of the area as per MoRD Specification Clause 201. By Manual Means.
0.8
-
8883
... More
Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections.
3600
-
25
... More
Construction of embankment with approved materials deposited at site obtained from roadway cutting and excavation from drain and foundation or other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per MoRD Specification Clause 301.5
2700
-
34
... More
Construction of granular sub-base by providing well graded material, in uniform layers on prepared surface and compacting with smooth wheel roller to achieve the desired density complete as per Technical Specification Clause 401 for all lead of granular material (Compacted thickness as specified to be measured). By Manual Means For Grading III Material.
2392.88
-
464.3
... More
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per MoRD Specification Clause 405. Using Crusher Broken Aggregate By Manual Means with all lead
576.62
-
1569
... More
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per MoRD Specification Clause 405. Using Crusher Broken Aggregate By Manual Means with all lead
717.19
-
1685
... More
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per MoRD Specification Clause 502 Low Porosity
7688.25
-
42
... More
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surfaces cleaned with Hydraulic broom as per MoRD Specification Clause 503.
7688.25
-
15
... More
Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per MoRD Specification Clause 508. Case - II By Mechanical Means. Bitumen (VG-30)
7688.25
-
128
... More
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 By Mechanical Means. Case - II : Type B Bitumen (S-65) [Using Crusher Sand]. [VG-30]
7688.25
-
48
... More
Providing and Laying of Interlocking M-30 grade Concrete Block Pavements having thickness 80 mm as per drawings and MoRD Specification Clause 1504with M-30 Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr Edge Blocks.
Category 'C' : Not dentated on any of its faces like Hexagonal, Rectangular, Square shape as per IRC:SP:63-2004.
2695
-
684
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. Ordinary soil Upto 3 m depth.
72.18
-
178
... More
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203. P.C.C grade M 10 Nominal mix (1:3:6).
12.06
-
3529
... More
Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. 600 mm dia.
22.5
-
1519
... More
Brick masonry work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202 & 1203. Brick masonry in 1:4 cement mortar.
27.09
-
3589
... More
Plaster on New Surface on Walls in Cement Sand Mortor including racking of joints etc. complete finish 20 mm thick using. 1 Cement : 4 Sand.
96.18
-
164
... More
White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1915.
17.4
-
12
... More
Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 P.C.C. grade M 20 Nominal mix (1:2:4).
0.77
-
4861
... More
Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
1
-
10822
... More
Providing & Erecting Typical Citizon’s Information Board as per approved drawing and Specification of MoRD, made of two M.S. Sheet of 1.6 mm thick each of size 900 mm x 750 mm stiffened by angle iron 25 mm x 25 mm x 3 mm all around the plates and plates fixed on frame of 75 mm dia pipe of 12 SWG sheet [Vertical Post 3050 mm with angle hold fasts and horizontal member 900 mm] to be joined by 5 mm thick M.S. plate at 12 places [65 mm x 50 mm] duly embedded in cement concrete M-15 grade of block of 600 mm x 600 mm x 750 mm size below ground level as per enclosed drawings and as directed by Engineering in charge. All M.S. will be stove enameled on both side. Lettering figuring and border will be with ready mixed Synthetic Enamel Paint of superior quality in required shade and colour etc. complete in all respect. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per MoRD Specifications.
1
-
8712
... More
Providing and fixing of PMGSY logo with definition plate (as per MORD design/drawing) 2mm thick MS plate framed to angle Iron 40x40x6mm including orange luminous colour paint on logo, size of diamand plate 600x600mm definition plate 900x250mm supported on MS post of angle Iron of size 65x65x6mm, 3m long stove enameled paint with hold fastfirmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and MoRD Specification Clause 1700
1
-
2977
... More
Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 600 mm equilateral triangle
10
-
1668
... More
Reinforced cement concrete M-15 grade kilometre stone/local stone of standard design as per IRC: 8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703.
-
-
-
... More
Ordinary Kilometer Stone (Precast)
4
-
1589
... More
200 m stone (precast)
20
-
364
... More
Providing and erecting direction and place identification of semi reflective sign boards as per IRC-67 made of 2 mm thick M.S. Sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70 mm width and required message, letters, figures with reflective tape of engineering grade as per MORD specifications of required shade and colour. Supported and welded on two nos. 47 mm x 47 mm of 12 SWG square tube of 3050 mm height duly strengthened by 25 mm x 5 mm MS flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701 .
3.24
-
3082
... More
Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements.
18
-
532
... More
Providing and erecting typical maintenance information board as per approved drawing and specification of MORD made of MS sheet of 1.6 mm thick of size 900 x 1500 mm stiffened by angle iron 25mm x25mmx3mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 SWG sheet (vertical post 3050mm with angle hold fasts and horizontal member 900mm) to be joined by embedded in cement concrete M15 grade of block of 600mm x600mm x750 mm size below ground level as per enclosed drawing and as directed by engineer in charge. All MS will be stove enamlled on both sides llettering figuring and borders will be with ready mixed synthetic enamelled paint of superior quality in required shade and colour etc. complete in all respect.All section of framed post and steel tube will be painted with primer and two coats of epoxy paint as per drawing and as per MORD specification.
1
-
8667
... More
Dantore - Ballar Road Km 40 to 17/21 KHM Km 4/0 to 7/0
-
-
-
... More
Clearing grass and removal of rubbish up to a distance of 30 m outside the periphery of the area as per MoRD Specification Clause 201. By Manual Means.
0.84
-
8883
... More
Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections.
1012.5
-
25
... More
Construction of embankment with approved materials deposited at site obtained from roadway cutting and excavation from drain and foundation or other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per MoRD Specification Clause 301.5
512.5
-
34
... More
Maintenance of WBM road including filling up of pot holes, ruts and rectifying corrugated surface, damaged edges and ravelling as per MoRD specification Clause 1906.
675
-
101
... More
Construction of granular sub-base by providing well graded material, in uniform layers on prepared surface and compacting with smooth wheel roller to achieve the desired density complete as per Technical Specification Clause 401 for all lead of granular material (Compacted thickness as specified to be measured). By Manual Means For Grading III Material.
450
-
718.4
... More
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per MoRD Specification Clause 405. Using Crusher Broken Aggregate By Manual Means with all lead
168.75
-
2235
... More
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per MoRD Specification Clause 502 Low Porosity
2250
-
42
... More
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surfaces cleaned with Hydraulic broom as per MoRD Specification Clause 503.
11250
-
15
... More
Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per MoRD Specification Clause 508. Case - II By Mechanical Means. Bitumen (VG-30)
11250
-
128
... More
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 By Mechanical Means. Case - II : Type B Bitumen (S-65) [Using Crusher Sand]. [VG-30]
11250
-
48
... More
Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
1
-
10822
... More
Providing & Erecting Typical Citizon’s Information Board as per approved drawing and Specification of MoRD, made of two M.S. Sheet of 1.6 mm thick each of size 900 mm x 750 mm stiffened by angle iron 25 mm x 25 mm x 3 mm all around the plates and plates fixed on frame of 75 mm dia pipe of 12 SWG sheet [Vertical Post 3050 mm with angle hold fasts and horizontal member 900 mm] to be joined by 5 mm thick M.S. plate at 12 places [65 mm x 50 mm] duly embedded in cement concrete M-15 grade of block of 600 mm x 600 mm x 750 mm size below ground level as per enclosed drawings and as directed by Engineering in charge. All M.S. will be stove enameled on both side. Lettering figuring and border will be with ready mixed Synthetic Enamel Paint of superior quality in required shade and colour etc. complete in all respect. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per MoRD Specifications.
1
-
8712
... More
Providing and fixing of PMGSY logo with definition plate (as per MORD design/drawing) 2mm thick MS plate framed to angle Iron 40x40x6mm including orange luminous colour paint on logo, size of diamand plate 600x600mm definition plate 900x250mm supported on MS post of angle Iron of size 65x65x6mm, 3m long stove enameled paint with hold fastfirmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and MoRD Specification Clause 1700
2
-
2977
... More
Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 600 mm equilateral triangle
2
-
1668
... More
Reinforced cement concrete M-15 grade kilometre stone/local stone of standard design as per IRC: 8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703.
-
-
-
... More
Ordinary Kilometer Stone (Precast)
2
-
1589
... More
200 m stone (precast)
12
-
364
... More
Providing and erecting direction and place identification of semi reflective sign boards as per IRC-67 made of 2 mm thick M.S. Sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70 mm width and required message, letters, figures with reflective tape of engineering grade as per MORD specifications of required shade and colour. Supported and welded on two nos. 47 mm x 47 mm of 12 SWG square tube of 3050 mm height duly strengthened by 25 mm x 5 mm MS flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701 .
2.16
-
3082
... More
Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements.
40
-
532
... More
Providing and erecting typical maintenance information board as per approved drawing and specification of MORD made of MS sheet of 1.6 mm thick of size 900 x 1500 mm stiffened by angle iron 25mm x25mmx3mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 SWG sheet (vertical post 3050mm with angle hold fasts and horizontal member 900mm) to be joined by embedded in cement concrete M15 grade of block of 600mm x600mm x750 mm size below ground level as per enclosed drawing and as directed by engineer in charge. All MS will be stove enamlled on both sides llettering figuring and borders will be with ready mixed synthetic enamelled paint of superior quality in required shade and colour etc. complete in all respect.All section of framed post and steel tube will be painted with primer and two coats of epoxy paint as per drawing and as per MORD specification.
1
-
8667
... More
Ballar Road to 4/6 MWM Km 0/0 to 4/500
-
-
-
... More
Clearing grass and removal of rubbish up to a distance of 30 m outside the periphery of the area as per MoRD Specification Clause 201. By Manual Means.
1.08
-
8883
... More
Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections.
1572.25
-
25
... More
Construction of embankment with approved materials deposited at site obtained from roadway cutting and excavation from drain and foundation or other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per MoRD Specification Clause 301.5
390
-
34
... More
Maintenance of WBM road including filling up of pot holes, ruts and rectifying corrugated surface, damaged edges and ravelling as per MoRD specification Clause 1906.
843.75
-
101
... More
Construction of granular sub-base by providing well graded material, in uniform layers on prepared surface and compacting with smooth wheel roller to achieve the desired density complete as per Technical Specification Clause 401 for all lead of granular material (Compacted thickness as specified to be measured). By Manual Means For Grading III Material.
759.38
-
696.8
... More
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per MoRD Specification Clause 405. Using Crusher Broken Aggregate By Manual Means with all lead
223.88
-
2040
... More
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per MoRD Specification Clause 502 Low Porosity
3828.82
-
42
... More
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surfaces cleaned with Hydraulic broom as per MoRD Specification Clause 503.
17212.5
-
15
... More
Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per MoRD Specification Clause 508. Case - II By Mechanical Means. Bitumen (VG-30)
17212.5
-
128
... More
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 By Mechanical Means. Case - II : Type B Bitumen (S-65) [Using Crusher Sand]. [VG-30]
17212.5
-
48
... More
Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
2
-
10822
... More
Providing & Erecting Typical Citizon’s Information Board as per approved drawing and Specification of MoRD, made of two M.S. Sheet of 1.6 mm thick each of size 900 mm x 750 mm stiffened by angle iron 25 mm x 25 mm x 3 mm all around the plates and plates fixed on frame of 75 mm dia pipe of 12 SWG sheet [Vertical Post 3050 mm with angle hold fasts and horizontal member 900 mm] to be joined by 5 mm thick M.S. plate at 12 places [65 mm x 50 mm] duly embedded in cement concrete M-15 grade of block of 600 mm x 600 mm x 750 mm size below ground level as per enclosed drawings and as directed by Engineering in charge. All M.S. will be stove enameled on both side. Lettering figuring and border will be with ready mixed Synthetic Enamel Paint of superior quality in required shade and colour etc. complete in all respect. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per MoRD Specifications.
1
-
8712
... More
Providing and fixing of PMGSY logo with definition plate (as per MORD design/drawing) 2mm thick MS plate framed to angle Iron 40x40x6mm including orange luminous colour paint on logo, size of diamand plate 600x600mm definition plate 900x250mm supported on MS post of angle Iron of size 65x65x6mm, 3m long stove enameled paint with hold fastfirmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and MoRD Specification Clause 1700
2
-
2977
... More
Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 600 mm equilateral triangle
4
-
1668
... More
Reinforced cement concrete M-15 grade kilometre stone/local stone of standard design as per IRC: 8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703.
-
-
-
... More
Ordinary Kilometer Stone (Precast)
3
-
1589
... More
200 m stone (precast)
20
-
364
... More
Providing and erecting direction and place identification of semi reflective sign boards as per IRC-67 made of 2 mm thick M.S. Sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70 mm width and required message, letters, figures with reflective tape of engineering grade as per MORD specifications of required shade and colour. Supported and welded on two nos. 47 mm x 47 mm of 12 SWG square tube of 3050 mm height duly strengthened by 25 mm x 5 mm MS flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701 .
2.16
-
3082
... More
Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements.
109
-
532
... More
Providing and erecting typical maintenance information board as per approved drawing and specification of MORD made of MS sheet of 1.6 mm thick of size 900 x 1500 mm stiffened by angle iron 25mm x25mmx3mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 SWG sheet (vertical post 3050mm with angle hold fasts and horizontal member 900mm) to be joined by embedded in cement concrete M15 grade of block of 600mm x600mm x750 mm size below ground level as per enclosed drawing and as directed by engineer in charge. All MS will be stove enamlled on both sides llettering figuring and borders will be with ready mixed synthetic enamelled paint of superior quality in required shade and colour etc. complete in all respect.All section of framed post and steel tube will be painted with primer and two coats of epoxy paint as per drawing and as per MORD specification.
1
-
8667
... More
A/R from Khajuwala Rawala Road to 3/7 PHM Km 0/0 to 3/0
-
-
-
... More
Clearing grass and removal of rubbish up to a distance of 30 m outside the periphery of the area as per MoRD Specification Clause 201. By Manual Means.
0.84
-
8883
... More
Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections.
1269.25
-
25
... More
Construction of embankment with approved materials deposited at site obtained from roadway cutting and excavation from drain and foundation or other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per MoRD Specification Clause 301.5
453.55
-
34
... More
Maintenance of WBM road including filling up of pot holes, ruts and rectifying corrugated surface, damaged edges and ravelling as per MoRD specification Clause 1906.
787.5
-
101
... More
Construction of granular sub-base by providing well graded material, in uniform layers on prepared surface and compacting with smooth wheel roller to achieve the desired density complete as per Technical Specification Clause 401 for all lead of granular material (Compacted thickness as specified to be measured). By Manual Means For Grading III Material.
506.25
-
696.8
... More
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per MoRD Specification Clause 405. Using Crusher Broken Aggregate By Manual Means with all lead
126.57
-
2090
... More
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per MoRD Specification Clause 502 Low Porosity
2475.1
-
42
... More
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surfaces cleaned with Hydraulic broom as per MoRD Specification Clause 503.
11475
-
15
... More
Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per MoRD Specification Clause 508. Case - II By Mechanical Means. Bitumen (VG-30)
11475
-
128
... More
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 By Mechanical Means. Case - II : Type B Bitumen (S-65) [Using Crusher Sand]. [VG-30]
11475
-
48
... More
Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
2
-
10822
... More
Providing & Erecting Typical Citizon’s Information Board as per approved drawing and Specification of MoRD, made of two M.S. Sheet of 1.6 mm thick each of size 900 mm x 750 mm stiffened by angle iron 25 mm x 25 mm x 3 mm all around the plates and plates fixed on frame of 75 mm dia pipe of 12 SWG sheet [Vertical Post 3050 mm with angle hold fasts and horizontal member 900 mm] to be joined by 5 mm thick M.S. plate at 12 places [65 mm x 50 mm] duly embedded in cement concrete M-15 grade of block of 600 mm x 600 mm x 750 mm size below ground level as per enclosed drawings and as directed by Engineering in charge. All M.S. will be stove enameled on both side. Lettering figuring and border will be with ready mixed Synthetic Enamel Paint of superior quality in required shade and colour etc. complete in all respect. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per MoRD Specifications.
1
-
8712
... More
Providing and fixing of PMGSY logo with definition plate (as per MORD design/drawing) 2mm thick MS plate framed to angle Iron 40x40x6mm including orange luminous colour paint on logo, size of diamand plate 600x600mm definition plate 900x250mm supported on MS post of angle Iron of size 65x65x6mm, 3m long stove enameled paint with hold fastfirmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and MoRD Specification Clause 1700
2
-
2977
... More
Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 600 mm equilateral triangle
5
-
1668
... More
Reinforced cement concrete M-15 grade kilometre stone/local stone of standard design as per IRC: 8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703.
-
-
-
... More
Ordinary Kilometer Stone (Precast)
3
-
1589
... More
200 m stone (precast)
12
-
364
... More
Providing and erecting direction and place identification of semi reflective sign boards as per IRC-67 made of 2 mm thick M.S. Sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70 mm width and required message, letters, figures with reflective tape of engineering grade as per MORD specifications of required shade and colour. Supported and welded on two nos. 47 mm x 47 mm of 12 SWG square tube of 3050 mm height duly strengthened by 25 mm x 5 mm MS flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701 .
2.16
-
3082
... More
Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements.
36
-
532
... More
Providing and erecting typical maintenance information board as per approved drawing and specification of MORD made of MS sheet of 1.6 mm thick of size 900 x 1500 mm stiffened by angle iron 25mm x25mmx3mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 SWG sheet (vertical post 3050mm with angle hold fasts and horizontal member 900mm) to be joined by embedded in cement concrete M15 grade of block of 600mm x600mm x750 mm size below ground level as per enclosed drawing and as directed by engineer in charge. All MS will be stove enamlled on both sides llettering figuring and borders will be with ready mixed synthetic enamelled paint of superior quality in required shade and colour etc. complete in all respect.All section of framed post and steel tube will be painted with primer and two coats of epoxy paint as per drawing and as per MORD specification.
1
-
8667
... More
7 KND Road to 3/5 KJD Km 0/0 to 5/0
-
-
-
... More
Clearing grass and removal of rubbish up to a distance of 30 m outside the periphery of the area as per MoRD Specification Clause 201. By Manual Means.
1.2
-
8883
... More
Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections.
1393.1
-
25
... More
Construction of embankment with approved materials deposited at site obtained from roadway cutting and excavation from drain and foundation or other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per MoRD Specification Clause 301.5
415.13
-
34
... More
Maintenance of WBM road including filling up of pot holes, ruts and rectifying corrugated surface, damaged edges and ravelling as per MoRD specification Clause 1906.
997.5
-
101
... More
Construction of granular sub-base by providing well graded material, in uniform layers on prepared surface and compacting with smooth wheel roller to achieve the desired density complete as per Technical Specification Clause 401 for all lead of granular material (Compacted thickness as specified to be measured). By Manual Means For Grading III Material.
843.75
-
686
... More
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per MoRD Specification Clause 405. Using Crusher Broken Aggregate By Manual Means with all lead
259.32
-
2065
... More
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per MoRD Specification Clause 502 Low Porosity
4455.1
-
42
... More
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surfaces cleaned with Hydraulic broom as per MoRD Specification Clause 503.
19125
-
15
... More
Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per MoRD Specification Clause 508. Case - II By Mechanical Means. Bitumen (VG-30)
19125
-
128
... More
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 By Mechanical Means. Case - II : Type B Bitumen (S-65) [Using Crusher Sand]. [VG-30]
19125
-
48
... More
Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
2
-
10822
... More
Providing & Erecting Typical Citizon’s Information Board as per approved drawing and Specification of MoRD, made of two M.S. Sheet of 1.6 mm thick each of size 900 mm x 750 mm stiffened by angle iron 25 mm x 25 mm x 3 mm all around the plates and plates fixed on frame of 75 mm dia pipe of 12 SWG sheet [Vertical Post 3050 mm with angle hold fasts and horizontal member 900 mm] to be joined by 5 mm thick M.S. plate at 12 places [65 mm x 50 mm] duly embedded in cement concrete M-15 grade of block of 600 mm x 600 mm x 750 mm size below ground level as per enclosed drawings and as directed by Engineering in charge. All M.S. will be stove enameled on both side. Lettering figuring and border will be with ready mixed Synthetic Enamel Paint of superior quality in required shade and colour etc. complete in all respect. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per MoRD Specifications.
1
-
8712
... More
Providing and fixing of PMGSY logo with definition plate (as per MORD design/drawing) 2mm thick MS plate framed to angle Iron 40x40x6mm including orange luminous colour paint on logo, size of diamand plate 600x600mm definition plate 900x250mm supported on MS post of angle Iron of size 65x65x6mm, 3m long stove enameled paint with hold fastfirmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and MoRD Specification Clause 1700
2
-
2977
... More
Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 600 mm equilateral triangle
6
-
1668
... More
Reinforced cement concrete M-15 grade kilometre stone/local stone of standard design as per IRC: 8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703.
-
-
-
... More
Ordinary Kilometer Stone (Precast)
4
-
1589
... More
200 m stone (precast)
20
-
364
... More
Providing and erecting direction and place identification of semi reflective sign boards as per IRC-67 made of 2 mm thick M.S. Sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70 mm width and required message, letters, figures with reflective tape of engineering grade as per MORD specifications of required shade and colour. Supported and welded on two nos. 47 mm x 47 mm of 12 SWG square tube of 3050 mm height duly strengthened by 25 mm x 5 mm MS flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701 .
2.16
-
3082
... More
Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements.
85
-
532
... More
Providing and erecting typical maintenance information board as per approved drawing and specification of MORD made of MS sheet of 1.6 mm thick of size 900 x 1500 mm stiffened by angle iron 25mm x25mmx3mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 SWG sheet (vertical post 3050mm with angle hold fasts and horizontal member 900mm) to be joined by embedded in cement concrete M15 grade of block of 600mm x600mm x750 mm size below ground level as per enclosed drawing and as directed by engineer in charge. All MS will be stove enamlled on both sides llettering figuring and borders will be with ready mixed synthetic enamelled paint of superior quality in required shade and colour etc. complete in all respect.All section of framed post and steel tube will be painted with primer and two coats of epoxy paint as per drawing and as per MORD specification.
1
-
8667
... More
Total Estimated Cost of Construction Work
1
-
1
... More
Routine Maintenance after Completion of Construction Work
-
-
-
... More
For 1st Year (1.11%)
25.5
-
11616.15
... More
For 2nd Year (1.43%)
25.5
-
14964.95
... More
For 3rd Year (1.83%)
25.5
-
19150.95
... More
For 4th Year (2.15%)
25.5
-
22499.75
... More
For 5th Year (2.48%)
25.5
-
25953.2
... More
Total Estimated Cost of Maintenance Work for 5 Years
1
-
1
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements