Panchayati Raj Department Tender

Supply of ISI makr AC Pressure pipeline class 15 manufatured by MAZZA process as per IS 1592-2003 or amnded up to date for casing of tube well for following dia nominal bore with jointing material PVC coupler as per technical specificationi and direction of Engineer in charge 250mm dia

providing & lowering in tubewell ISI marked GI pipe "B" class Delevery Line 80 mm DIA in 6mtr length

Supply and installation of 3 phase submersible pumping motor pump sels Is!marked IS:8034-2011) of 5 star rating energy saving (like kirloskar.lecho,texmo induding screwing and welding of flanges on gi riser pipes and transportaion etc. complate Up to 15KW (20HP) & head up to 20 Mtr

supply & fixing of ISI marked 3 core pvc fiat submersible cabel as per IS 694:1990 including connection 10sqmm 3 Core flate/round

supply and fixing of elcetircl control panel comprising of suitable rating MCCB fully auto utomatic star-delta starier, ov vott meter, phase preventer, sullable starting capacitors, phase indicators, lighting over load relay, ampere meter with CTS, arrangement etc, complete suitable for three phase pump aet. The panel should have space for energy meter (supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should of angle iron of size 35x35x5mm) duly boiled/screwed with enclosure box having 4 I be of minimum size 900 x 600 x 450 mm with Stand (made legs, each leg's length 18" and double door including legs should be embedded in M-15 cement concrete piat form. The size of CC gin built locking system. The platform should be equal or bigger than the base size of panei having height of at east 200 mim from ground level. front of space space for energy meter with glass for moter reading. The The panel should have opening of suitable size in operation of Above 15 HP & upto 20HP

supply and fling MS clamp set of 50x6mm flat from iron with nuts and bolts etc for holding the riser pipe assembly of submersible molar pump #2.22

Supply & Fixing ixing tube well cover of MS sheet mm thick at shroud top around the edge so as 45cm long & two Gl flanges to form a cap & Semm thick 100m wide on the top end of casing pipe with GI Nipple at both ends in centre of MS 80mm sizes passing through a hole in the A GI sheet. A 25 mm socket with end plug shall also be welded over top plate nipple having outside thread of size 1/2" (for installation pressure gauge) shall be provided & welded with 80mm Gl ripple near top plate nipple shall be provided with end plug 250mm dis

Development of tube well having depth up to 250 mir as per IS: 11189-1 give IS: 2800 (Part-1)-1991 (both amended sand free water for required yield of the gravel packed tube well. 2.10 up to date) using suitable methods lo -1985 and

add for photography