Panchayati Raj Department Tender

Providing and fixing alumium work for doors, windows, ventrilators and partition with extuded built up standard tubular appropriate Z section and other section of approved make conforming to IS 733 and IS 1285 fixed rawal plug and screws or fixed clips or with expansion hold fasteners inculding necessary filling up of gap at junction at top bottam and sides with requerd pvc neoprenc felt etc. alumium section shall be smooth rust free staight mitered and jointed mechanically wherevr required including cleat angel aluminium snap beading for glazing pancling cp brass stainless steel scerws at lower & al handle & al aldrop etc. all complete as par architecture drawing and the direction of Engineer in charge (Glazing and paneling to be paid for separntely). For suttters builtup standard tubular section of openble doors windows & ventilators including providing & fixing hingens/ rollers etc. and making provision for fixing of fitting wherever required (lockes shall be paid for separntely). powder coating aluminum (minimum thickness of powder coating 50 micron) vc vc ROOM 1 ROOM 2 ROOM 3 ROOM 4

Providing and fixing glazing in aluminium doors, windows, ventrilators and shutter partitions etc. with PVS/ neoppene gasket etc. complete as par the architectueral drawing and direcation of engineer - in-charge. (cost of aluminium snap beading shall be paid in basic item.)

Providing and double action hydraulic floor spring of approved IS 6315 marked. For doors including cost of cutting floors as required embedding in floor and cover plates with brass pivot and single piece m.s. with brass cover plate

Filling the gap upto 5 mm depth and 5mm width in between aluminium frame & adjacent RCC/ Brick/ stone work by prociding weather siicon sealant over backer rod of appoved quality as per architectural drawing and direction of engineer-in-charge complete.

Providing and fixing steel gate grating bars flats or black pipe with hold fast and fitinng complete as par desing and drawing including cutting welding and febricaition with priming coat of red oxide and ciraction of engineer - in - charg complete.

supply of computer tabel of modular nature haxing all the necessary arrangement for key board cpu ups printer and wire manager tabal Top. The table top of size 900 x 600mm (wxd) would be made out of post formd on 25mm thick particle board with 0.7mm thick carvica sheet in half round post formed finish on the rear side. matching color compensating laminate fixed on the bottom side other two side. other two side are edge banded and duly sealed with 1.5mm thick pvc edge banding of matching colour with high pressure through feed machine. Keyboard Below the table top the keyboard pull out tray having silding arrangement fixed on side supporting legs with 450 mm G.I.telesopic channel. Keyboard of size 750 x450 made out out of 18mm thick particle board laminate with 0.7 mm thick laminate sheet having all four sids Flat edge banfed and duly sealed with 1.5 mm thick PVC EDGE banding of matching.Side 600 x750mm made out of post formed on 18 CPU, UPS & Printer PLACES. TABel haveing the provision for CPU of size 300 x 600 x 600mm (WxDxH) below the table top on the right side of tabel adjoining to this on left side below the table the provision for UPS of size 450 x 600 x250mm (WxDxH) and above this the provision for printer and statonry having overall dimension of 450x 600x 300mm (WxDxH) All this made out of 18 mm thick particle board laminate with 0.7mm thick laminate sheet having all four side flat edge banded and duly sealed with 1.5mm thick PVC edge banding of matching color with high preessure through feed machine. All the parts of table are duly fixed with mini fix dowel system with each other having matching drilled holes to be made on CNC multi hole boring matching and alignment of the different part of the table 4 nos of self adjusting level screw of size of size 45 x6mm are provide at the bottom of the both legs for the proper leveling of the table .

supply and fixing of Modular work station with partition 60mm thick aluminium top 25mm thick particle board with post formed one drawer or one open able shutter one KBT or one cpu trolly Two 1200mm heigth storage unit size 1200 x 1200 x 1200 mm single in combination.

supply and fixing of Modular work station with partition 32mm thick aluminium top 25mm thick particle board with four side edage banding 1200mm heigth storage unit with Two KBT or one cpu trolly. size 1500 x 3000 x 1650 mm single in combination.

providing and fixing vertical blinds headrail shall be oriented aluminium alloy 50mm wide x 18 mm high the thick ness shall be 1.2mm control unit shall be made of high grede polymer and shall be housed in side the headrail which shall transfar motion form chain tilter to tile tod chain tilter shall be made of palstic bead of diameter 4.5mm throgh which 2mm thick polyester code passes. tilt rod shall be extruded aluminum having 3 key ways Runner shall be moulde plastic wheels mounted on plastic axies to enbal runner to slide. unhindered in headraill Luver shall have be made of febric 100 mm colour fast and shall have protective scothgard coating of resist stanins and dust. bottom mechanism consist bottom wigth made of powder coated galvanized steel for maximum corrosion resistance The bottom weight shall be attached with.