Nuclear Fuel Complex Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Nuclear Fuel Complex - NFC Tender
Civil Works Others
Eprocure
Opening Date30 Nov 2021
Closing Date20 Dec 2021
Tender Amount₹ 4,85,00,000
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_NFC_660202_1Bid Award Id
ViewTender No
C/1261/2021Tender Authority
Nuclear Fuel Complex ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Declaration by Contractor
BOQ Items
... More
Earth work in over areas by mechanical means (Hydraulic excavator) / manual means/controlled blasting to required profile, level, grade, camber, etc in all soils/strata as mentioned below upto all depths as per drawing and as directed, 1.5 m in width as well as 10 sqm in plan area including dressing of excavated sides and ramming of bottoms and disposal / stacking of excavated materials within a lead of 150m and all inferent lifts and filling in layers not exceeding 200mm, watering, consolidation etc. complete all as per specifications, drawing and as directed by Engineer-in-charge
-
-
-
... More
Soft rock
100
-
-
... More
Hard rock ( by chiselling or wedging or rock hammer and cutter or hydraulic splitter or by using machine such as poclain with jack hammer or controlled blasting or by approved chemical method as directed by EIC)
1800
-
-
... More
Earth work excavation in foundation pits, trenches etc in hard rock by chiselling or by using machine such as Poclain with Jack hammer etc. upto depths mentioned below including shoring if necessary, dressing the sides, trimming, ramming and preparing the bed for foundation and refilling around the foundation and in plinth with selected excavated earth, in layers not exceeding 150mm. thick, watering, consolidation to the satisfaction of Engr-in charge and disposing of the surplus earth within a lead of 150m etc. all complete as per specifications, drawings and as directed by the Engineer-in-charge. Upto 1.5 m from ground level
-
-
-
... More
From GL Upto 1.5 Mtrs below
-
-
-
... More
Soft rock
480
-
-
... More
Hard rock ( by chiselling or wedging or rock hammer and cutter or hydraulic splitter or controlled blasting/by using machine/ such as poclain with jack hammer or controlled blasting or by approved chemical method as directed by EIC)
1370
-
-
... More
Below 1.5 Mtrs to 3.00 Mtrs
-
-
-
... More
Soft rock
85
-
-
... More
Hard rock ( by chiselling or wedging or rock hammer and cutter or hydraulic splitter or controlled blasting/by using machine/ such as poclain with jack hammer or controlled blasting or by approved chemical method as directed by EIC)
250
-
-
... More
Filling in plinth with selected earth excavated from suitable location around Rawatbhata with all leads by mechanical tranport including all leads, lifts, loading, unloading, stacking, levelling, speading, in layers not exceeding 150mm thick, breaking clods, watering, consolidation to obtain 90% proctor density etc., complete as per specification, drawings & as directed by the Engineer in charge.
3500
-
-
... More
Filling available excavated earth (Crushed Sand avialable inside campus) in plinth , sides of foundation etc., in layers not exceeding 20cm in depth , consolidating each deposited layer by ramming and watering , lead upto 50m and lift upto 1.5m.
1500
-
-
... More
Extra for rolling using power road roller of 8 to 10 tonne capacity for compaction of earth work including watering, labour etc., compleplete as specified and directed by EIC.
1300
-
-
... More
Lead charges for additional lead over the initial lead over the initial lead of 50 m by mechanical transport, including loading, unloading, stacking, the disposable soil, rock etc., Note: Measurement of lead charges will be based on truck measurement with a deduction of voids @20% and 50% for soils and rock or debris respectively
-
-
-
... More
For rock/debries lead above 1KM upto 3KM.
2500
-
-
... More
Supplying and spreading pesticides chlorpyriphos or other chemical approved by central insecticides board as directed by the manufacturer and spraying the mixture uniformly by sprayer as pre-construction anti- termite treatment at the rate of 7.5 liters per sq.m. on vertical and 5 ltrs. per sq.m. on horizontal surfaces (or as directed by the manufacturer ) within the trenches, 50% of the emulsion to be filled in the holes made in trenches at 150mm. centre to centre etc. complete as per IS 6313 Part-II. (The payment will be made on the basis of plinth area measurement only at ground floor/stilt area for all stages of operation and vertical face will not be measured for payment) all complete as per specifications, drawings and as directed by the Engineer in charge a) This item will be executed through approved agency who is a member of Indian Pest Control Association, approved by Central Insecticides Board. b)The contractor shall have to furnish ten years guarantee in the prescribed proforma as per Section-10 (iv) Conditions and clauses of contract-2008, to maintain the anti-termite treated area/structure free from termite
c) Prior approval of Engineer in Charge shall be obtained after testing the chemical for antitermite to be used and shall be tested in approved laboratory and to be submitted to Engineer in Charge . Cost of testing shall be included in the rates quoted.
600
-
-
... More
II. CONCRETE (PLAIN AND REINFORCED) :
-
-
-
... More
Plain Cement Concrete 1:2:4 using Portland Pozzolana Cement conforming to IS 1489 Part-1 (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, Andhra Cements Ltd., KCP make) with crushed stone sand and graded stone aggregates of 20mm maximum size at all depths/heights below/above plinth level including consolidation, finishing smooth/broom finish as applicable, curing, etc., but excluding Formwork, complete as specified and directed.
20
-
-
... More
Plain Cement Concrete 1:3:6 using Portland Pozzolana Cement conforming to IS 1489 Part-1 (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, Andhra Cements Ltd., KCP make) with crushed stone sand and graded stone aggregates of 20mm maximum size at all depths/heights below/above plinth level including consolidation, finishing smooth/broom finish as applicable, curing, etc., but excluding Formwork, complete as specified and directed.
210
-
-
... More
Reinforced Cement Concrete by insitu mixing using Weigh Batching or RMC of Ultra Tech, Birla Ready Mix of Grade M - 35 (Minimum Cementitious Content not less than 350 Kg/Cum) up to specified level using Portland Pozzolana Cement conforming to IS 1489 Part-1 (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, Andhra Cements Ltd., KCP make) with crushed stone sand and graded stone aggregates of 20mm maximum size including mixing superplasticizer of brand M/s. Fosroc, Demech, Huntsman, Pidilite, Sunanda Chemicals, Agro Chemicals, MBT in proportion as per Manufacturer's Specifications, Pumping / Lifting of concrete to the required heights, Concrete laid to proper level, profile and slope, placing concrete, consolidation, finishing, curing, etc., but excluding Formwork and reinforcement as specified and directed.
-
-
-
... More
Below FFL
680
-
-
... More
Above FFL
235
-
-
... More
Reinforced Cement Concrete (RCC) by insitu mixing using Weigh Batcher or RMC of Ultra Tech, Birla Ready Mix of Grade M-25 (Minimum Cement Content 330Kg/Cum) using Portland Pozzolana Cement conforming to IS 1489 Part-1 (M/s. ACC, Ultra Tech, Birla, Ambuja make) with sand and graded stone aggregates of 20mm maximum size including mixing superplasticizer of brand M/s. Fosroc, Demech, Huntsman, Pidilite, Sunanda Chemicals, Agro Chemicals, MBT in proportion as per Manufacturer's Specifications, Pumping / Lifting of concrete to the required heights, Concrete laid to proper level, profile and slope in panels of convenient size by alternate/staggered panels, placing concrete, consolidation, finishing, curing, etc., for Grade Slab, etc. but excluding Formwork as specified and directed.
180
-
-
... More
Proving and mixing Corrosion Inhibiting Admixture Conplast WL. Of M/s. Fosroc or equivalent of M/s. Krishna Conchem in the concrete etc., complete as specified and directed. Note: The Dosage and other mixing methodology should be as per manufacturer's specifications.
2240
-
-
... More
Casting and fixing in position precast reinforced cement concrete covers of required size in RCC M-20 insitu mixing BY WEIGH BATCHER using ordinary Portland Cement conforming to IS 8112 (M/s. ACC, Ultra Tech, Raasi, Birla, Coramandal, M/s. Andhra Cement Ltd., KCP), crushed stone sand , graded stone aggregate of 10 mm maximum size at and at all depths and heights below and above plinth level including mixing superplastizer (M/s. Fosroc, Demach, Huntsman, Pedilite, Sunanda Chemicals, Agro Chemicals, MBT) in proportion as per manufacturer’s specifications including necessary shuttering, providing and fixing cover blocks of required sizes, consolidation finishing as specified, curing, making casting yard and curing tank, stacking carefully at casting yard and transporting to the site of use placing in position as shown in drawings, aligning, leveling, making good all the damaged surfaces etc., complete as directed for covers for storm water drains/trenches with and without holes including formwork but excluding reinforcement
20
-
-
... More
III. FORM WORK :
-
-
-
... More
Providing centring and shuttering using 12mm thick prelaminated plyboard including strutting, propping, staging made out of steel frames/H-frames/Steel Pipes/Cup and Lock System etc., and removal of the same as required including chamfers, splays, keys, wedges, nails, bracings, brackets and applying One (1) coat of shuttering oil (Cemol/Fosroc make/any other approved equivalent) on all shuttering surfaces coming in contact with concrete, etc., if required, for insitu Reinforced Concrete and in Plain Cement Concrete works complete as specified and directed.
-
-
-
... More
Below and Upto Finish Floor Level
1535
-
-
... More
Above Finish Floor Level
1355
-
-
... More
IV. REINFORCEMENT & STRUCTURAL STEEL
-
-
-
... More
Supply, fabrication and erection of Reinforcement bars for Reinforced cement concrete items at and at all depths and heights below and above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more conforming to IS 1786 of Tata, Vizag,Sail, JSW make, including transport to site, loading and unloading, making fan hooks of required shape, dowels for bonding masonry, transporting steel to site, decoiling, removing of scales, straightening, cutting, bending, fixing bars with chairs, space bars wherever required, in position with two strings of 18 gauge soft drawn annealed MS binding wire inclusive of its supply etc., complete as specified and directed.
154
-
-
... More
Supply, Fabrication and Erection of Structural Steel work using Rolled Steel Joists, Beams, Channels, Plates, etc., at all levels above and below plinth level including supplying of steel sections and plates conforming to BIS 2062 of make Vizag Steel, Tata, SAIL, Jindal Ispat or any other approved manufacturer using ingots of above manufacturer make, loading, unloading, transporting the steel to site of work, cutting, fabricating using welding/bolts, using weld rods of make D&H, Advani, Philips or its approved equivalent and/or bolts and nuts from approved source, erecting using derricks/pulleys/cranes or any suitable means, fixing in position and painting with one coat of approved red oxide zinc chromate primer and two coats of Synthetic Enamel paint as per manufacturers Specifications of make Asian Paint, Berger, Johnson and Nickelson, Nerolac, cleaning the sections /plates by suitable means, etc., complete as directed by the Engineer-in-Charge.
-
-
-
... More
For Rolled steel sections.
22
-
-
... More
For plain plates/chequered plates. .
5
-
-
... More
Supplying, fabricating, erecting and fixing in position, insert plates/ embedded plates/pipes of GI in heavy quality conforming to relevant BIS2062/ 1239 of required shape and size, welding anchoring legs not less than 12mm dia MS rods, placing in position in concrete while casting, including painting with one coat of approved anti corrosive paint of shalimar product for embedded portion of pipe as per drawing in line, level and plumb complete as directed.
3
-
-
... More
Supplying, fabricating, erecting and fixing in position, foundation bolts, through bolts etc. using MS rounds of make M/s Tata, Vizag Steel, Jindal or approved equivalent conforming to IS 432 and suitable nuts including threading, placing in position in concrete in level using template, providing grease and protective cover like covering with polyethelene sheet to bolts and nuts to correct levels complete and as directed by EIC.
1
-
-
... More
Providing and fixing MS wicketgate/ MS tubular gates single/ double leaves/wiket of required size alo ng with or without wicket gate , comprising 38mm nb medium quality steel tube frame with 65x10mm thick MS flat for horizontal, vertical and diagonal stiffeners, including welding flat to frame work, supplying and fixing/welding 50mm square hard drawn steel wire fabric of Sl no.2 (50x50x3mm) conforming to IS 1566 of standard make or its approved equivalent with 20mmx3mm thick MS flat welded to frame and providing necessary heavy duty ball bearing side hung hinges, lugs, latches, locking arrangements, pipe inserts and other fittings and fixtures necessary for smooth operation of gates, providing nd fixing/welding MS spikes of 12mm square bars at not more than 150c/c, as directed by Engineer in charge.
25
-
-
... More
V. STONE MASONRY :
-
-
-
... More
Random rubble stone masonry using approved local stones in foundations/pedestals and plinth at and at all depths below finished floor level in cement mortar 1:6 (1 cement :6 using crushed stone sand of grade conforming to BIS 2116) including simultaneous flush pointing with the same mortar, bond stones, curing, etc., using crushed stone sand of grade conforming to BIS 2116, complete as specified and directed. (Stones to be used from the site)
25
-
-
... More
VI. BRICK MASONRY :
-
-
-
... More
Brick work using quality flyash (non modular) bricks of class designation 7.5 conforming to IS12894 using cement mortar 1:6 (1 cement :6 using crushed stone sand of grade conforming to BIS 2116) at and at all depths below plinth level in foundation and in plinth, storm water drains, etc., simultaneous pointing with same mortar below ground level, and ranking out joints above ground level, curing etc., complete as per specifications and as directed for sub structure etc.,
25
-
-
... More
Brick work using quality flyash bricks of class designation 7.5 conforming to IS12894 using cement mortar 1:6 (1 cement :6 using crushed stone sand of grade conforming to BIS 2116 ) at all depths and heights below and above plinth level including pilasters, steel / tubular scaffolding, raking out joints, curing etc., complete as per specifications and as directed in super structure.
290
-
-
... More
Half brick masonry using non modular fly ash bricks of class designation 10, conforming to IS :12894 in partition walls in cement mortar 1:4 (1 cement :4 using crushed stone sand of grade conforming to BIS 2116) all depths and heights below and above plinth level including scaffolding, raking out joints, curing, etc., complete including providing stiffeners of reinforced cement concrete 1:2:4, 115 mm x 75 mm size at every 900 mm height, necessary formwork, curing, etc., complete as per specifications and as directed but excluding reinforcement. Note:- Reinforcement will be paid under relevant item.
55
-
-
... More
VII FLOORING :
-
-
-
... More
Construction of Granular sub-base by providing HBG material conforming to Grading-ii of MoRTH Table 400-1 including cost, (excluding seigniorage) charges and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavatopr/approved means at OMC and compacting with suitable means to achieve the desired density etc., complete for finished item of work as per MoRTH Specification 401(5th revision and as directed by Engineer-in- Charge. Note: Measurement for payment will be made based on levels for finished item of work). Stone shall be used from the site.
120
-
-
... More
Providing and laying at all floors and levels 6mm (min) thick first quality glossy/ matt / antiskid/rustic / digital collection etc. ceramic tile flooring as per the approved pattern and colour as mentioned below conforming to IS 15622 latest of edition from approved list of maufacturers or equilvalent laid in cement mortar bedding / backing, close jointed and grouted with matching cement slurry to match the colour of the tiles, finished to level, line, slope and plumb including cutting of tiles, making openings/cutout if necessary, wastage and final cleaning of surfaces as required, curing etc.complete all as per drawing specifications & as directed by Engineer in charge.
a) In flooring with rustic/matt finished/ 300x300mm, 600 x 600mm or equivalent approved sizes of ceramic tile laid over 20mm thick cement mortar bedding 1:4 ( 1 cement : 4 sand)
b) In skirting laid over 12 mm thick CM 1:3 backing. c) Anti skid ceramic tile with 300x300 or equivalent approved sizes of ceramic tile laid over 20/15mm thick cement mortar bedding 1:4. In dado / clading with tile of size 200x300mm or size as per working drawing laid over 12 mm thick CM 1:3 backing for toilets.
d) Sand shall be crushed stone sand.
e) Tiles shall be of make Kajaria/Regency/Somani/Jhonson & Jhonson
Note: i) Quoted rate shall include extra cement mortar required to match the water proofing plaster if any to maintain the lines and plumb of dado.
ii) The quoted rate shall include border / combination of tiles as instructed by the Engineer in Charge
iii)The sizes of tiles mentioned are approximate and subject to the availability in market during execution. If the required size is not available the next higher size of tiles shall be used without any extra cost to the Department. The tenderer may note the same and quote accordingly.
-
-
-
... More
Anti skid ceramic tile with 300x300 or equivalent approved sizes of ceramic tile laid over 20/15mm thick cement mortar bedding 1:4. for toilets
20
-
-
... More
In dado / clading with tile of size 200x300mm or size as per working drawing laid over 12 mm thick CM 1:3 backing for toilets.
65
-
-
... More
Providing and fixing removable raised/false access flooring with system and its components of approved make for 450 MM height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of:
(a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug.
(b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80mm thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-charge.
c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed on the side of the panel to ensure the quality of the product.
27
-
-
... More
Providing and laying double charged vitrified floor tiles in 600x600 size (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make like Kajaria/Regency/Somani/Jhonson & Jhonson , in all colours and shades, laid cement mortar , jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete for entrance foyer, corridors, lobbies, etc.
Note: i) Quoted rate shall include extra cement mortar required to match the water proofing plaster if any to maintain the lines and plumb of dado.
ii) The quoted rate shall include border / combination of tiles as instructed by the Engineer in Charge
iii)The sizes of tiles mentioned are approximate and subject to the availability in market during execution. If the required size is not available the next higher size of tiles shall be used without any extra cost to the Department. The tenderer may note the same and quote accordingly.
-
-
-
... More
In flooring with rustic/matt finished 600x600 mm or equivalent approved sizes of double charged vitrified tile of make Somany/Kajari or approved equivalent laid over 20mm thick cement mortar bedding 1:4 ( 1 cement : 4 sand)
300
-
-
... More
In skirting laid over 12 mm thick CM 1:3 backing.
25
-
-
... More
Providing, laying/fixing in position 18 to 20 mm thick for Risers,Treads and Flooring etc., best quality MARBLE stone slabs combinationwith Italian marble stones of different colours, shades and finished surface texture etc., including machine cut and machine polished, laid to wall/floor with cement paste to including backing coat 20mm thick mortar bed in CM 1:4, laid in line level and plumb, close jointed, joints pointed with matching cement slurry including cutting required shape, size buffing the edges if required, cleaning, hand polishing wherever necessary, curing, double scaffolding, providing suitable rebate and etc., complete all generally as shown in drawing and as specified and directed
60
-
-
... More
Kota stone slabs 25/20mm thick in flooring including treads/rises and landing of staircase etc., of steps, landing and pillars laid on 20/12 mm (average) thick cement mortar 1:4/1:3 (1 cement : 3/4 coarse Msand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. in all levels/height with all lead and lifts including labour, necessary tools and plants, all material, including edging/ nosing and making grooves as per arch design etc,. and as per the direction of engineer in charge.
-
-
-
... More
For flooring and treads, landing of steps.
30
-
-
... More
For risers, skirting
15
-
-
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compated bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. Complete all as per direction of Engineer-in-Charge for 60mm thick cement concrete paver block of M-35 grade with approverd colour,design &pattern.
100
-
-
... More
Providing and fixing of approved quality heat resistant terrace tiles of size 300x300x20mm with SRI78 on a pre-waterproofed and finished surface of terrace in 20mm thick cool mortar proportionately mixed with white cement and water in ratio as per approved manufacturer's specifications and grouting with white marble powder in the ratio 1:1 / any other specified waterproof tile grout and polishing complete surface upto 3 cuts with skirting of 150mm of tile provided along the parapet walls, all complete.
525
-
-
... More
VIII. DOORS, WINDOWS & ROLLING SHUTTERS ETC :
-
-
-
... More
Supplying and fixing in position approved motor automatic operated (push & pull) steel rolling shutters made from M.S. lathes of not less than 1.25 mm thick including supplying and fixing all necessary fixtures, fittings, top hood, guide channels, shutter suspension shaft not less than 6", ceiling strips providing approved quality of ball bearings, locking arrangements, handles, lugs, cutting, drilling necessary holes in concrete, grouting lugs with cement concrete 1:2:4, including providing and fixing not less than 1.0HP motor of Crompton Greaves, L&T or any approved equivalent along with other accessories for On and Off, level switch connected operatable, applying one shop coat of approved Zinc chromate primer and two coats of synthetic enamel paint complete as shown in the drawing and as directed (measurement for rolling shutters will be as per the structural openings, hoods shall not be measured separately).
20
-
-
... More
Providing and fixing pressed steel door frames and shutters , of PROFILE - B conforming to IS: 4351, with Frame GI 1.20 mm , Shutter : GI 0.80 mm thick . Frame profile - 100 x 57 mm including ball bearing butt hinge ( SS304 grade), of size 100x75x3 mm with screws, Motrise sash lock (H9-GU-BKS 2160, 65 BS/72/9 mm) , Euro profile 5 pin cylinder 5702, 70mm key , lever handle LT 001, 19 dia with roses & escutcheon (SS304) including painting with one coat of zinc primer and two coats of synthetic enamel paint and as directed by Engineer -in-charge..
20
-
-
... More
Providing wood work with CP teakwood in frames for doors & cupboards using II class teakwood at all heights above plinth level wrought framed and fixed in position including providing and fixing with suitable size of coach screws wherever required / M.S. hold fasts of size 40 mm x 3 mm and 200 mm long, bent to shape embedded in cement concrete 1:2:4 blocks for door frames, fixed in position with necessary lugs rawl plugs and screws and coach screws, applying one coat of approved wood primer to the exposed surfaces of door frame and two coats of bituminous paint to the surfaces of frames in contact with masonry/concrete, etc., complete as indicated in drawings and as directed.
0.3
-
-
... More
Providing and fixing in position double/single leaf flush door shutters of solid block board core, 35 mm thick, BWR grade, at all heights above plinth level internally lipped with second class teakwood, 25 mm deep along all edges of shutters bounded with water-proof type phenol formaldehyde synthetic resin, hot pressed, Chemicaly treated and pre-lamination of required design, colour and pattern / teak vineer on both faces/ requisite finish providing and fixing under pressure with approved type adhesive 200 x 150 mm laminated sheet on both sides where mortice lock is fixed including providing and fixing 2nd class teak wood rebate at meeting junction of shutters in case of double door shutters, including providing &fixing ISI marked 3 nos SS butt hinges with SS pin size 125 x 63 x 1.9 mmwith screws, &fixing hinges supplied under relevant item to shutter and frame and complete generally as shown in drawings and as specified and directed for single door shutter / double door shutters.
13
-
-
... More
Providing and fixing factory made single extruded WPC ( Wood polymer Composite ) solid door/window/ceosetory windows & other FRAMES / CHOWKHAT comprising of virgin PVC polymer of K value 58-60 ( Suspension Grade ), calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum , screw withdrawal strength of 2200N (Face ) & 1100 N ( Edge ) , Modulus of Elasticity 900 N/mm2 and resistance to spread of flame of Class A Category with property of being termite/borer proof, water / moisture proof and fire retardent and fixed in position with M.S hold fast / lugs / SS dash fastners of required dia and length complete as per direction of Engineer in Charge. ( M.S hold fast / lugs or SS dash fastners). Note : For WPC solid door/window frames , minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
-
-
-
... More
Frame size 50 x 100 mm.
11
-
-
... More
Providing and fixing factory made single extruded wpc ( Wood polymer Composite ) solid plain flush door shutter of required size comprising of virgin PVC polymer of K value 58-60 ( Suspension Grade ), calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) having minimum frame density of 650kg/cum , screw withdrawal strength of 1800N (Face ) & 900 N ( Edge ) , Modulus of Elasticity 900 N/mm2 and resistance to spread of flame of Class A Category with property of being termite/borer proof, water / moisture proof and fire retardent, include providing and fixing with stainless steel butt hinges of required size with neccessary full body threaded star headed counter sunk S.S Screws, for each door complete as directed. For toilet doors all as per direction of engineer in Charge.
-
-
-
... More
30 mm thick.
4
-
-
... More
Providing and fixing in position epoxy powder coated (minimum thickness of power coating 50 microns) aluminium sections/aluminium sections for fixed partition/wall span/ventilators/doors and sliding windows, etc., using extruded built up standard tubular and other sections of approved make (Jindal/Hindal/Alumin co sections as shown in the drawing or its approved equivalent sections) and confirming to IS 733 and IS 1285 of required available colour, manufactured to relevant IS Standard Specifications including applying Epoxy coating of required thickness, fixing with rawl plugs and screws or fixing with clips or with expansion hold fastners, glazing with 4mm/5mm thick glass of float glass quality, aluminium butt hinges of approved make and size (wherever required), necessary filling up of gap at junctions at top, bottom and sides with required PVC/Neoprene felt, etc, including cleat angles, aluminium snap beading for glazing/panelling, PVC lining, C.P Brass/Stainless steel screws, nuts, washers, weather strips, handles with locking arrangements making draining holes, etc., including providing and fixing other accessories with ISI mark wherever applicable to windows, fixing suitably with brick wall/RC column structures, filling the gaps between structural opening and aluminium frame work with polysulphide/GE Siliconates, generally as shown in architectural drawings and as directed (Glazing and Panelling to be paid for separetely).
275
-
-
... More
Providing and fixing glazing with 4 mm thick plain float glass (weight not less than 10kg/sqm) of approved quality (Atul, Modiguard, Triveni, Hindustan Pilkington) including PVC/EPDM lining as per the drawing and as directed for ventilators.
1
-
-
... More
Providing and fixing glazing with 5.5 mm thick plain float glass ( weight not less than12.50kg/sqm) of approved quality (Atul, Modiguard, Triveni, Hindustan Pilkington) including PVC /EPDM lining as per the drawing and as directed for window shutters.
35
-
-
... More
Providing and fixing in position of 2nd class teak wood of Architrave of finished section 15x20mm to doors at all floors as per drawing including providing and fixing wood screws at 600mm C/C with french polish with malamine coating etc complete as directed.
65
-
-
... More
Supplying and fixing to wooden doors at and at all heights above plinth level approved 6 lever cylindrical mortice locks of Godrej /Everite make or approved equivalent make comprising brass body and all parts including sticking plates made of brass, stainless steel keys in duplicate, a pair of mortice lock handles of approved pattern of Godrej make or its approved equivalent make with approved cadmium plated brass screws of appropriate size etc., complete as directed to single/double shutters for all doors
4
-
-
... More
Supplying and fixing to wooden doors etc. and at all heights above plinth level approved anodized extruded aluminium tower bolts conforming to relevant IS specifications (‘Classic’ or its approved equivalent) with approved cadmium plated brass screws of appropriate size etc., complete as directed.
-
-
-
... More
Using 250 mm long
16
-
-
... More
Using 150 mm long
4
-
-
... More
Supplying and fixing to wooden doors at all heights above plinth level approved anodized extruded aluminium handles with round grip and face plate conforming to relevant IS specifications and with ISI marking ‘Classic’/JYOTHI or approved equivalent and of size 125 mm (grip) with approved cadmium plated screws of appropriate size etc., complete as directed.
6
-
-
... More
Supplying only approved anodized extruded aluminium heavy quality butt hinges generally conforming to IS specifications CLASSIC, JYOTHI make or approved equivalent make) of size75x45x3.2mm with cadmium plated wood screws of appropriate size etc., complete as directed
18
-
-
... More
Supplying and fixing to wooden doors approved anodized aluminium aldrop conforming to relevant IS specifications and with ISI marking classic/ J.S.E. (ECIE) make or any approved equivalent of size 250 x 19 mm with suitable approved CP brass screws, machine screws or bolts for securing clamps from inside etc., complete as directed.
5
-
-
... More
IX. PLASTERING AND POINTING :
-
-
-
... More
Cement plastering 6 mm thick for ceiling with cement mortar 1:3 (1 cement :3 river sand) finished smooth finish with including hacking of concrete surfaces, preparation of surface, steel/tubular scaffolding, curing, etc., complete as directed.
100
-
-
... More
Cement plastering 15 mm thick for internal walls in cement mortar 1:4 (1 cement :4 river sand) , and at all heights above plinth level over brick walls or concrete surfaces including making necessary grooves in between junctions of brick masonry and RCC and also other places wherever required over brick walls or concrete surface, preparation of surface, steel/tubular scaffolding, curing, etc., complete as directed.
1195
-
-
... More
Sand faced plaster 20 mm thick in 2 coats over exterior masonry and concrete surfaces at and at all heights above plinth level as given below with base coat in cement mortar 1:4 (1 cemen:4 sand) with approved integrated water proofing compound @ 2% by weight of cement, of M/s. Fosroc/Demach/ Huntsman/ Pedilite/ SIKA Qualcrete / MBT or as per manufacturer’s specifications, 12 mm thick and finishing coat in CM 1:3 (1 cement:3 sand), 8 mm thick, final rendering, making necessary grooves, bands, drip moulds as required, finished smooth internal putty(lapam) of Birla/Jk of not less than thickness 1mm(one) thicknes) double steel/tubular scaffolding wherever necessary, hacking of concrete surfaces, curing, etc., complete as specified and directed.
890
-
-
... More
Providing and applying white cement based putty in two coats with average thickness not less than 1 mm, of Birla make or any other approved manufacturer, over the plastered wall surface (external/internal) to prepare the surface even and smooth complete.
1295
-
-
... More
Providing and fixing plaster mesh/chicken mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm size 25mm x 25mm with a zinc coating of 120gms per sqm width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications.
275
-
-
... More
X. WATERPROOFING :
-
-
-
... More
Providing and laying integral cement based water proofing treatment of average thickness of 110mmm ( minimum 65mm thick) including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement slurryusing 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
Note:- 1) The treatment shall be tested by ponding water for a period of 10 days. If due to location of rain water pipes the average thickness of treatment exceeds 110 mm for easy flow of water the extra brickbat coba will be paid as extra item and the rate for the same to be got approved from the Department before execution 2) The waterproofing treatment is to be guaranteed for bone-dry condition for a period of 10 years in the prescribed proforma.
3) The measurement for payment shall be the entire area of terrace covered by the treatment measured between brick/concrete parapets without plaster and the area of vatas calculated by taking the length of vatas and the height above the finished level of the terrace.
530
-
-
... More
Filling in bath, W/C, toilet, depressed areas with water proofing brick bat coba of the agency approved by the Dept. at all floors and locations upto the required level and making the surface finished suitable to receive floor finish etc. all complete as per drawings and water proofing agency's specifications & as directed by the Engineer in charge.
5
-
-
... More
Water proof plaster in cement mortar 1:3 ,with waterproofing compound make of ( M/s Fosroc , MBT, Sika, Sunanada Chemicals etc.) @ 2% by weight of cement including scaffolding, curing, hacking of concrete surfaces etc. Complete a) 15 MM thk for underground drains etc.
310
-
-
... More
XI. PAINTING:
-
-
-
... More
Water proofing cement paint in two coats in all floors and locations for concrete /wall surfaces in shafts paint of Asian, Pidilite, Johnson & Nicklson, Nerolac, berger,including sand papering and cleaning the surfaces, filling up cracks and crevices if any with approved putty, scaffolding etc. complete all as per specifications and as directed by the Engineer-in-charge for ducts etc..
40
-
-
... More
Wall & ceiling painting with premium acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.of Asian or equivalent in Pidilite, Johnson & Nicklson, Nerolac, berger brand, manufacture and shade over two coats of approved primer at all heights above plinth level including preparing the surfaces, scaffolding and cleaning, etc., complete and as directed.
1570
-
-
... More
Painting exterior walls on sand faced plaster with two coats of Alkali & fungal resistance, dirt resistance exterior paint with comprehensive warranty of 5 years of required shade of Makes Asian - Apex Advanced or equivalent in Pidilite, Johnson & Nicklson, Nerolac, berger, of exterior quality haying 100% acrylic, of approved shade including preparing surfaces, external putty of Birla or its approved equivalent wherever required applying one coat of approved primer as per manufacturers specification, applying and filling cracks or wherever required for external filler, curing, scaffolding, cleaning, etc., complete. Note :- Minimum Usage Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. or as per manufacturer's specification
890
-
-
... More
Providing and applying with Epoxy paint (two or more coats) on brick & Concrete surfaces at all locations and heights prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete as specified and directed
50
-
-
... More
XII. MISCELLANEOUS ITEMS :
-
-
-
... More
Providing and fixing SS railing made out of commercial chromium steel tubes SS 304, of various diameters, of approved make, 2 mm wall thickness, pattern as shown in drawing/as directed including supplying or fabricating, fittings like SS bends, tees, etc., welding the pipes using TIG welding or any other approved method, grinding/buffing the welded joints smooth, erecting the railing in position in line, level and plumb, fixing tailing in position by grouting/or any approved system, cleaning, polishing the joints if required, scaffolding etc., complete all as specified and directed.
130
-
-
... More
Providing and fixing CI gratings conforming to IS 1729 for rain water pipe entry mouths/filter bed, etc., including chasing making holes in existing masonry concrete surfaces, refilling with cement concrete 1:2:4 reinstating to the original conditions, painting with two coats of bitumastic paint, all in level and line complete as directed and specified for rain water mouths, filter bed.
5
-
-
... More
Providing and fixing 110 mm n.b.un-plasticised PVC rain water pipes with necessary PVC clamps and wooden gutties of approved make conforming to IS: 13592 type ‘A’with injection moulded fittings jointing with approved synthetic adhesive seal rings conforming to IS: 5382 embedding the slab junctions leakproof testing complete in line, level and plumb all as directed.
30
-
-
... More
Supplying, lowering, laying, mentioned below the nominal bore, RCC SPUN PIPES (Class NP2)/NP-4 conforming to IS:458 with necessary collars, laid to correct grade and levels at and at all depths below plinth level including cutting to lengths, jointing with hemp yarn and cement mortar 1:1, caulking the joints and finishing, curing, etc., complete as specified and directed.
-
-
-
... More
150mm NB NP-2
10
-
-
... More
300mm NB NP-2
20
-
-
... More
600mm NB NP-3
20
-
-
... More
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using GI. Slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4 mm GI. Adjustable rods with galvanised steelk level clips of size 85x30x0.8 mm, spaced at 1200 mm centre to centre along main 'T', bottom exposed with 24 mm of all 'T' sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.
375
-
-
... More
Supplying and fixing GI Chain link fencing of required height with 50mm diamond mesh of approved quality and make with 3.15mm (10 guage) galvanized iron wires conforming to IS 2721 including unrolling, straightening, stretching, fixing tight to structural steel posts and struts erected in position by means of 6mm dia approved quality galvanized iron machine straightened rods at top and bottom horizontally throughout fence and vertically at every angle post, fixed with approved quality galvanized iron hooks, bolts, nuts and washers etc., complete as directed
200
-
-
... More
Providing grouting (including tamping) for foundations, structures, equipments, base plates, anchor holes, etc., with non-shrink, free flow grout of shrinkhomp-30N/Sqmm of M/S A.C.C, Fosroc or equivalent mixed with filler like sand in 1:1, including shuttering wherever necessary at and at all depths and heights below and above plinth level complete as specified and directed. note: Weight of grout used in the work will be measured for payment. However, the rate quoted shall inclusive of all materials.
1
-
-
... More
Supplying and fixing natural rubber pad 25 mm thick, 40 shore hardness conforming to relevant IS code including cutting to required size, cost and conveyance all materials and labour charges etc. complete as directed by Engineer-in-charge.
8
-
-
... More
Providing and fixing pre-moulded bituminous filler 25 mm thick and required width of (Shalitex or other approved manufacture) including cutting, positioning, supporting and filling with approved sealing compound etc. complete.
8
-
-
... More
XIII: WATER SUPPLY
-
-
-
... More
Supplying, laying and fixing CPVC pipes confirming to ASTM D2846, SDR -13.5 at a working pressure of 320 PSI at 23 deg C, complete with all fittings and clamps, Fittings (Conforming to relevant IS/ASTM/BS code), in trenches, floors, walls including embedding if necessary, joining of pipes and fittings shall be done by solvent cement conforming to ASTM F-493, including bends, elbows, tees, reducers, sockets, unions and other specials, supplying and fixing with hooks in wooden plugs or embedding in walls and floors, cutting pipes to required lengths, making connections, cutting chases or holes in walls with machine & making good the same, testing, etc. all complete as per drawings, specifications and directions of Engineer-in-Charge. (CPVC pipes shall meet National Sanitation Foundation
(NSF) requirement for drinking water system)
-
-
-
... More
For the following Nominal Bore (NB) pipe: 20 mm
25
-
-
... More
For the following Nominal Bore (NB) pipe: 25 mm
10
-
-
... More
For the following Nominal Bore (NB) pipe: 40 mm
20
-
-
... More
For the following Nominal Bore (NB) pipe: 50 mm
50
-
-
... More
Providing and fixing in position heavy pattern screw down Gun metal ball valve with ball SS confirming to IS.778 with hand lever at top including testing for 10 kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc. as per specification.
-
-
-
... More
20mm nb for coolers
1
-
-
... More
25 mm n.b.
2
-
-
... More
40 mm n.b.
2
-
-
... More
50 mm n.b.
2
-
-
... More
Providing hoisting and installing at required elevation double layered moulded HDPE cylindrical vertical water storage tanks of various capacities of Sintex or Duracon make, with suitable SMC cover at top, coated with UV coating/layer including the cost of labour for making hole in the storage tank for inlet, outlet, scour and overflow and the required fittings/ gaskets, float valve including making necessary supporting system complete as directed
1000
-
-
... More
XIV. DRAINAGE
-
-
-
... More
Providing & laying UPVC under ground drainage pipes & Fittings of Sudhakar/Nandi/Godavari make for storm water drains& sewerage pipes of following size conforming to IS:15328 to proper level & grade, jointing including prviding coupler with cement solvent / welded joints / as per manufacturer's requirement, including encasing the pipe alround using cement concrete 1:3:6 complete to an offeset of D/2 where D= dia of entire pipe length pipe all as per specifictions, drawing and as directed by the E.I.C. item includes Providing and fixing UPVC fittings such as Bendes, Tees & Y, Reducers, Blanking Plugs, Couplers, Adaptors etc
-
-
-
... More
110 mm DN (SN 8kN/m²-SDR34)
25
-
-
... More
160 mm DN (SN 8kN/m²-SDR34)
150
-
-
... More
Supplying and fixing following size uPVC UV-Stabilised soil / waste quality pipes and fittings ( SWR ) for soil, waste, vent, antisyphonege, HVAC waste pipe and rain water pipe lines consisting following items of work:- i) Providing and fixing uPVC UV-Stabilised Soil / waste pipe as per IS:13592 and IS:14735 Grade-B laid in floor & on Exposed faces of wall of Supreme make ii) Fixing the pipeline vertically by Metal clamps with rubber seal of Supreme make Cat. No. SWRMCR 1 to 6. iii) Providing and fixing uPVC cowl at the top of soil, waste water & vent pipe line. iv) Laying the pipe below floor / ground to proper slope and gradient for making connections of soil / waste water pipe line with inspection chamber or Manhole, including the cost of cement mortar, cement concrete, water proofing compound etc. v) Jointing the pipe with Solvent Cement & Rubber ring gasket with making holes in walls / floor grooving and redoing the same and brick support etc. Giving water-tightness test for the pipes laid as per codal provisions. Providing Ring Joint pipes at verticals and solvent cement jointed pipes at consealed locations. vi) Necessary cutting to the required length including short pieces, fittings with & without door, assorted fittings such as plugs, tees, couplers, reducers, cross tees, reducing tees, elbows, bends, cleaning pipe, single & double Y, vent cowl, gaskets, offsets, Tank / WC connectors etc.
-
-
-
... More
75 mm n.b. pipes
20
-
-
... More
100 mm n.b. pipes
20
-
-
... More
Providing uPVC Gully Trap of 150 X 100 mm size with 100 mm outlet with Grating of approved Make, placing at correct position, embedding in cement concrete 1:2:4, 100 mm thick alround complete.
4
-
-
... More
Construction of rectangular CHAMBERS of internal clear dimension of mentioned below ( internal clear) in 230 mm thick brick masonry in cement mortar 1:6 over a bed of 150 mm thick 1:4:8 cement concrete in foundation, plastering with cement mortar 1:4, 20 mm thick on inside, and all outside exposed surfaces finished with a floating coat of neat cement, 1:2:4 cement concrete for benching in slope 1 in 30 and channel finished with neat cement, brick corbelling at top if necessary to provide clear opening and providing and fixing CI cover with frame of light duty single seal pattern weight not less than 33 kgs embedded in cement concrete 1:2:4, providing and fixing PVC encaptualted MS rungs of 20mm square, each at 300 mm centre to centre if depth exceeds 800 mm, painting CI cover and frame and CI steps with two coats of bitumastic paint etc. complete-For depth of chamber not exceeding 900 mm. However minimum depth of chamber not less than 450mm
-
-
-
... More
450x600mm
2
-
-
... More
600x900mm
4
-
-
... More
Extra over above item for depths beyond 900 mm of Rectangular chamber including providing and fixing PVC encaptulate MS rungs 200 square, each @ 300 mm C/C, staggered vertically and horizontally etc., as per specifications.
-
-
-
... More
450x600mm
4
-
-
... More
600x900mm
8
-
-
... More
Providing uPVC Floor Trap (Multifloor trap of 110 x 75 x 50 size of Supreme make Cat No. NSPHMTS04L / NSPHMT005L and 3 pc top tile & flush strainer, mat finish of Supreme make Cat No. NSPHTT201L/NSPHTT200L.) / Nahani Trap of following size having not less than 40 mm effective water seal, fixing the trap in position and connecting with waste water pipe by cement solvent / as per manufacturer's recommandation, embedding the trap in cement concrete 1:2:4 to correct level and gradient, providing and fixing 200 x 200 mm size top tile with central strainer & flat cover / flush strainer, closing the side inletes with plugs if required etc. all complete as per specification and as directed by EIC.
6
-
-
... More
XV. SANITARY ITEMS :
-
-
-
... More
Providing and fixing EUROPEAN WATER CLOSET suite comprising Hind ware or jaguar :
a) WASH DOWN PATTERN European water closet best Indian make, in light colour glazed vitreous, with integral ‘P’ or ‘S’ trap.
b) Plastic low level flushing cistern of gleaming light colour shade, best quality, champion or approved equivalent, conforming to IS:7231 complete with all internal fittings, matching heavy quality PVC flush bend mounted on a pair of white enamel painted brackets.
c) 15 mm n.b. heavy quality PVC inlet of heavy quality connection with CP brass unions connected at ends.
d) 15 mm n.b. screw down variety heavy quality C.P. brass stop cock conforming to IS:781.
e) Solid plastic heavy quality seat with lid of approved make and colour with C.P. brass pillar hinges, conforming to IS:2548 (Part I&II).
f) 15 mm n.b. heavy quality GI overflow pipe with specials from cistern to 150 mm above floor level painted and terminated with mosquito-proof perforated cap.
2
-
-
... More
Providing and fixing best quality WASH BASIN of size 550 mm x 400 mm with plain rims, of hinware or jaguar comprising of: a) Best Indian make wash basin in light colour glazed virtreous chinaware conforming to IS:2556 part IV supported on suitable wall brackets of heavy quality and of size mentioned above. b) One number heavy quality 15 mm n.b. C.P. brass pillar cock with Jam nut conforming to IS:1795 c) One number 15 mm n.b. heavy quality PVC inlet connection with CP brass unions at ends. d) One number 15 mm n.b heavy quality C.P. brass stop cock. e) One number 32 mm C.P. brass heavy quality bottle trap of approved quality. f) 32 mm n.b. heavy quality G.I. waste pipe line with specials from bottle trap to nahani trap including painting with two coats of anticorrosive bitumastic paint, etc., complete.
2
-
-
... More
Providing and fixing in position bevelled plain edged mirror 600 x 450mm made out of best Indian glass of 6 mm thick of approved manufacturer, mounted on plywood sheet/ plain AC sheet of 6 mm thick fixed in position with four number of CP brass screws with detachable CP brass caps, washers, rawl plugs, etc., complete as directed.
2
-
-
... More
Providing & fixing in position following type CP fittings/ Fixtures/Faucets of 15 mm nominal dia. with ISI mark/ approved make including providing & fixing specials, wall flanges and fixing to concealed / exposed pipe line with leak proof threaded joints using tephlon tapes, testing the joints hydraulically to a pressure of 10 kg./ sq.cm, rectifying the leaky joints if any, including cleaning etc. complete all as per specifications.
-
-
-
... More
Providing and fixing heavy quality fancy variety C.P. brass screw down BIB TAPS of M/S. Jaguar/Hindware make conforming to IS: 8931 on G.I. lines- size 15 mm.
5
-
-
... More
C.P brass 2 Way Bib Cock with wall flange of Jaguar Cat.No. ORM 10041
2
-
-
... More
Proving and fixing in toilets Health faucet of Jaguar Make (ALD-CHR-585) or equivalent with 1 metre long Easy flex tube in chrome finish and wall hook etc., complete as directed.
2
-
-
... More
C.P brass Bottle Trap, 30 mm dia. with wall flange of Jaquar cat. No. ALD 769.
2
-
-
... More
Supplying following C.P Brass Bathroom / toilet accessories of following make and fixing on the wall using CP brass screws, rawl plugs etc. as per manufacturer's requirement all complete at the locations shown and as directed by the E-in-C.
-
-
-
... More
Stainless steel Toilet Paper Roll Holder, recessed type with flap of Jaguar Cat. No.AHS - 1553
2
-
-
... More
Stainless steel Soap dish, recessed type of Jaquar Cat. No. AHS -1531.
2
-
-
... More
Stainless steel Towel Rail/Grab bar of Jaquar Cat. No. AHS-1507.
2
-
-
... More
CP brass double Coat Hook of Jaguar Cat. No. AKP-35761P.
2
-
-
... More
Liquid soap dispenser Jaquar CAN 1135N
2
-
-
... More
Glass shelf 600 mm long as per Jaquar cat. No: ACN-1171N
2
-
-
... More
Towel Ring square with round flange of Jaquar Cat. No. CAN 1121N
2
-
-
... More
XVI. ROAD WORK :
-
-
-
... More
Surface excavation not exceeding 300mm to 450mm deep for road, pavement, building area, formation etc in required camber, profile, excavating using mechanical equipment or any suitable means, filling the ditches with the good available earth, spreading, breaking clods, lumps, watering, dressing, leveling, compacting and consolidating surface with 5 to 8 tonne roller including clearing of all the areas involving excavation and filling of all grass, rank vegetation, shrubs, bushes, cutting of trees upto 300 mm girth measured at 1.0 m above ground level, etc. and disposing the spoils within a distance of 50 m as directed for area levelling/ land grading before start of work for flooring and road work.
300
-
-
... More
Construction of Granular sub-base by providing HBG material conforming to Grading-ii of MoRTH Table 400-1 including cost, (excluding seigniorage) charges and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavatopr/approved means at OMC and compacting with suitable means to achieve the desired density etc., complete for finished item of work as per MoRTH Specification 401(5th revision and as directed by Engineer-in- Charge. Note: ( Payment will be made based on levels for finished item of work).
75
-
-
... More
Providing and Laying in position RMC of Ultratech, Aparna, Charminar make, of grade M20 or 1:2:4 in-situ mixing by Weigh Batcher using Pozzolona Portland Cement conforming to BIS 1489 of brand M/s. ACC, UltraTech, Raasi, Birla, Coramandal, Andhra Cements Ltd., KCP using river sand and graded stone aggregates of 40mm maximum size including mixing Superplastizer of brand M/s. Fosroc, Demach, Huntsman, Pedilite Sunanda Chemicals, Agro Chemicals, MBT in proportion as per manufacturers Specifications, pumping /lifting, concrete to the required locations, concrete laid to proper camber, profile, level / slope / gradient in panels of convenient size by alternate / staggered panels, placing concrete, consolidation, finishing, applying Two (2) coats of bituminous paint at the contact surfaces of construction joints, forming Expansion Joints of 12mm thick, providing necessary form work, curing, etc., complete as specified and directed for Pavements/road .
45
-
-
... More
Providing, fixing, filling and sealing expansion/construction joints using 12 mm thick bitumastic board manufactured by M/s. STP Ltd., or any other approved equivalent in expansion joints of cement concrete roads including cleaning the surfaces where joints are formed applying one coat bitumastic emulsion cutting the board to the required sizes placing in position filling and sealing the top of the joints with Salitex sealing compound of size 12 x 20 mm deep, using compound manufactured by M/s. STP Ltd., or equivalent including heating, pouring complete etc. in line level as directed.
1
-
-
... More
Supplying and Fixing in position IRC Fabric SI No.4 (100 x 100 x 4mm) conforming to IS 1566 of standard make or its approved equivalent in CC road.
300
-
-
... More
PART B ELECTRICAL Note: Pre Dispatch inspection & testing of following items is envisaged at manufacturer's work. The waiver for pre dispatch inspection, due to any reason, shall be at discretion of Competent authority.
1.Distribution boards 2.Wires
3.Lighting Luminaries
4.Ceiling Fan
5.Cat-6 cables
6.Elevators
-
-
-
... More
PART A: DISTRIBUTION BOARDS
-
-
-
... More
DISTRIBUTION BOARDS Supply, installation, testing & commissioning of following readymade distribution boards, double door, IP 42 degree protection complete with necessary, MCBs, earth leakage circuit breaker (ELCB), MCCB, wireway box etc. & all as per drawings (G.A. & fabrication drawing to be got approved) and specifications relevant IS & instruction of Engineer-in-charge.
-
-
-
... More
8 WayPPI (Seven segment)DB with following
1)63A, Four pole(FP), MCB
2) 63A, 30mA, DP RCCB -3 No. 2) 6A to 25A SP MCB – 24 nos. 3) 8 way brass neutral link -- 3 set 4) 8 way brass earth link -- 3 set Note: The circuit wiring in DB shall be as shown in drg.
2
-
-
... More
SPN MCB fabricated DB for housing following,
1) 16A Two pole(DP), 30mA RCBO -1 No. Incomer timer and 12A contactor
2) 6A to 25A SP MCB – 8 nos. 3) 8 way brass neutral link -- 2 set 4) 8 way brass earth link -- 2 set Note: The circuit wiring in DB shall be as shown in drg.
1
-
-
... More
PART B: POINT WIRING AND SUBMAIN WIRING
-
-
-
... More
Point wiring in MS conduits : Point wiring for following points with 1.1 KV grade FRLS PVC insulated multistranded copper conductor wire, MS conduits of 25 to 40 mm dia, switches sockets, metallic modular boxes, termination, cover plates etc as per specifications and drawings and as per instructions of E-I-C and as detailed below
-
-
-
... More
Primary Switch Box/Out door lighting DB point
3 No. 2.5 sqmm wires(P, N & E) from DB to the Lighting switch board and to additional switches/sockets looping, if any in the same box in same circuit point.
13
-
-
... More
Primary Light point
2 No. 1.5 sq.mm for P& N & 1 No. 2.5 sqmm for earth wires From Switch box to the light point including 6 A switchwith, ceiling rose or angle/batton holder as per drawing. Note: Neutral wire can be laid from the nearest light/fan point of the same circuit.
34
-
-
... More
Secondary Light point
2 No. 1.5 sq.mm for P& N & 1 No. 2.5 sqmm for earth wires From one light point to another including ceiling rose or angle/batton holder as per drawing. Note: Neutral wire can be laid from the nearest light/fan point of the same circuit.
39
-
-
... More
Primary street light / outdoor light point
2 No. 1.5 sq.mm for P& N & 1 No. 2.5 sqmm for earth wires From DB to the wall mounted Street light point including required accesories as per drawing. Note: Neutral wire can be laid from the nearest light/fan point of the same circuit.
6
-
-
... More
Secondary street light/ outdoor light point
2 No. 1.5 sq.mm for P& N & 1 No. 2.5 sqmm for earth wires From one light point to another including required accesories as per drawing as per drawing. Note: Neutral wire can be laid from the nearest light/fan point of the same circuit.
6
-
-
... More
Exhaust Fan point 2 No. 1.5 sq.mm for P& N, & 1 No. 2.5 sqmm for earth wire from Switch box to the ex. fan point point along with 6 A switch, 6A Socket(near by Exhaust fan). Note: Neutral wire can be laid from the nearest light/fan point of the same circuit.
2
-
-
... More
Ceiling Fan point
2 No. 1.5 sq.mm for P& N, & 1 No. 2.5 sqmm for earth wire from Switch box to the fan point point along with 6 A switch & 5 step regulator. Note: Neutral wire can be laid from the nearest light/fan point of the same circuit.
8
-
-
... More
Primary Power point
3 No. 2.5 sqmm wires(P, N & E) from DB to the power point along with two Nos 16A switches and 2 Nos 16 A universal socket
10
-
-
... More
Secondary Power point 3 No. 2.5 sqmm wires(P, N & E) from power point to the secondary power point along with 1 No. 16A switches and 1 No16 A universal sockets
16
-
-
... More
AC point
2 No. 4 sq.mm for P& N, & 1 No. 2.5 sqmm for earth wire from DB to the AC point through & including 1 No. 20A DP MCB(10 kA breaking capacity) in metal box(at operating height) to 20 A 3 pin metal clad socket with plug top near to AC.
4
-
-
... More
PART C: Earthing and LIGHTNING PROTECTION
-
-
-
... More
Supply, installation, testing & commissioning following heavily hot dipped GI earth strip for ground conductors fixed with no.10 GI wood screws & 1-2 mm thick GI saddles with G.I machine screws or in ground at 750mm below, interconnection of earth strip with welded joints and GI nut bolts & washers, painting with two coats of metallic Aluminium paint for above ground portion & painting with two coats of black bituminous compound for earth strip in ground etc. all as per drawing, specifications and as per the instructions of the Engineer-in-charge. Note excavation for this item measured seperately & conductor used as down conductors.
-
-
-
... More
50 X 6 mm GI strip for earth mat and earthing
2100
-
-
... More
25 X 6 mm GI strip with insulators for lightning protection
300
-
-
... More
PART D: TELEPHONE and Network SYSTEM
-
-
-
... More
Telephone Point Wiring: Point wiring with 4 pair CAT-6 wires copper conductor PVC insulated, in 25 mm dia rigid MS conduit (concealed in slab /wall or complete with all conduit accessories, RJ-11 telephone socket outlets with shutter in a box with connector, ferrule numbers on both side of the circuits all terminations with ferrule /lugs if required, modular box at one end, labelling all as per drawing specifications & as per instructions of E-I-C. NOTE: 1. Point wiring means 4 pair CAT-6 wires from Telephone Tag Block to assigned point including end termination of one pair at both sides and other pairs should be kept spare.
18
-
-
... More
Telephone Tag Block (TTB) : Supply, installation, testing & commissioning of following readymade Krone connector telephone tag block box, 18 SWG MS CRCA sheet, concealed/surface mounted on MS frame of size 40 x 40 x 5mm and grouted on the wall/fixed on the column free standing type with anchor fasterners, cable end/wire way box,if required, with adequate space facility to be provided in the TTB, with front operable hinged door, neoprene rubber/cork gasket for joints, wire bunching clamps , name plate etc. all as per standards, specification, drawing & instructions of E.I.C. Note: 1) Point distribution diagram shall put in side the DB with polythene protective cover. 2) All fabrication drawings shall be got approved. 3) Disconnection module shall be Krone Part No. 69011006-02 or equivalent approved.
-
-
-
... More
50 pair telephone tag box :
A set consisting of :
1)Disconnection module 2 /10 --5 nos.
2)Back mounting frame - 2/11 --1 nos
(C.T. box with mounting bracket )
3. Transparent dust cover -- 1 no. complete with all accessories 4. Label Holder - 1 nos.
1
-
-
... More
Network Point Wiring: Point wiring with 4 pair CAT-6 wires copper conductor PVC insulated, in 25 mm dia rigid MS conduit (concealed in slab /wall or complete with all conduit accessories, including RJ-45 Network socket outlets with shutter in a box with connector, ferrule numbers on both side of the circuits all terminations with ferrule /lugs if required, modular box at one end, labelling all as per drawing specifications & as per instructions of E-I-C. NOTE: 1. Point wiring means 4 pair CAT-6 wires from Network JB Block to assigned point including end termination at both sides and RJ45 socket at one end with connector in a box
12
-
-
... More
PART E: MISCELLENEOUS ITEMS
-
-
-
... More
MS Fabrication :
Supply, fabrication and installation of supports using MS channel/angle / flat/ MS rod hangers etc.including painting with two coats of primer and two coats of epoxy paint of approved shade as per instructions of EIC.
500
-
-
... More
Supply & installation of 300 mm dia heavy duty RCC Hume pipe of class 'NP3' to be laid in ground/from concrete cable trench to ground, for passing of cables with necessary joints, concrete supports. Scope includes escavation below ground level in all types of soil/concrete road cutting/foot path cutting, nallah cutting /any RCC wall/floor cutting including back filling, dewatering, consolidation, reinstatement of excess earth within the radius of 500 m and original,disposal making good to the original finish etc. spare space of hume pipes after cable laying and spares hume pipes shall be sealed properly with fireproof materials.
60
-
-
... More
Supply, fixing & installation of pre mixed & ready to use M/s. HILTI make firestop foam CP 620 in 300ml bottle for sealing openings in electrical shafts, Telephone shaft, raceways & cutouts, hump pipes & where ever required & as per instruction of EIC.
2
-
-
... More
Supply, fixing & installation of pre mixed & ready to use M/s. HILTI make firestop mortar CP 636 for sealing openings in electrical shafts, Telephone shaft, raceways & cutouts, hume pipes & where ever required & as per instruction of EIC.
4
-
-
... More
PART F: LIGHT, LUMINAIRES, CEILING FANS, ETC.
-
-
-
... More
Ceiling Fans :
Supply, installation, testing & comissioning of following ceiling fans as per specification and instructions of E I C
-
-
-
... More
BEE 5 star rated 1200mm sweep ceiling fan
8
-
-
... More
Light Luminaires & Fittings: Supply, installation, testing & commissioning of following luminaires as per drawing, specifications & as per the instruction of E.I.C.
-
-
-
... More
LED Surface Mounted 1600 Lumen O/P Luminaire Similar to M/s Philips Cat. No. SM200C LED16S-6500CCT OD PSU CIRRUS MINI PRO' or Equivalent Approved
7
-
-
... More
LED Surface Mounted 3300 Lumen O/P Luminaire Similar to M/s Philips Cat. No. SM365C LED33S-6500CCT OD PSU WH CIRRUS Surface Mounted or Equivalent Approved
24
-
-
... More
LED Surface Mounted 2000 Lumen O/P Luminaire Similar to M/s Philips Cat. No. BN308C LED20S-6500CCT L120 PSU WH Batten or Equivalent Approved
10
-
-
... More
LED bracket mounted streetlight fixture IP 66, 7000 lumens system output similar to M/s Philips BRP410 LED CW 072 MR FG SI PSU GR or Equivalent Approved
12
-
-
... More
LED surface mounted bulkhead luminaire fitting having 600 lumen output similar to M/s Philips cat no. WT202 W LED 6S CW PSU S2 PC or equivalent approved.
1
-
-
... More
10W, 1x 2ft LED Tube light fitting + mounting accessories
2
-
-
... More
Exhaust Fans:
-
-
-
... More
Supply, installation, testing & commissioning of 225 mm dia , casette type of exhaust fans, single phase complete with blades, motor, scope includes supply of 3C copper 1.5 sq.mm. flexible chord of suitable length with louvers and fixing arrangement in window/wall as per instructions of EIC.
2
-
-
... More
Supply, installation, testing & commissioning of 450 mm dia , Singe phase, Heavy duty exhaust fans complete with blades, motor, luvers, scope includes supply of 3C copper 1.5 sq.mm. flexible chord of suitable length with fixing arrangement in window/wall as per instructions of EIC.
8
-
-
... More
Fan Hook Boxes
Supply, installation, testing of concealed fan hook boxes of size 150 x 150 x 75 mm deep fabricated out of 2mm thick M.S CRCA sheet with 12.5 mm dia M.S tested rod hook with brass earthing stud & welded nut from inside and 2mm thick round M.S cover plate overlapping by 15 mm, including red oxide and two coats of white synthetic enamel paints and brass chromium plated screws and cup washers for fixing and all as per conceptional drawing enclosed & instruction of Engineer-in-charge (Sample box with cover to be got approved before fabrication including the fabricator)
8
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements