Nuclear Fuel Complex Tender

Supply & Installation of 12mm thick frameless tempered clear glass double door Size : - 1800mm X 2400mm With door spring and locking arrangements and both way handle and patch fittings. Specifications : Tempered glass is formed by heating glass to the softening point in a horizontal tempering stove, and then quickly cooling it. Properties: 1) Safety (tempered): when broken, it spits into tiny harmless pieces. 2) Strong intensity: heat-strengthened glass is approximately twice as strong as annealed glass of the same thickness, and tempered glass is about 4 times. 3) Outstanding performance in resisting thermal stress and wind-load. 4) Tempered glass cannot be cut, drill hole and other further processed. (For details, please refer the technical specification)

Supply & Installation of 12mm thick frameless tempered clear glass single door Size :- 1000mm X 2400mm With door spring and locking arrangements and both way handle and patch fittings. Specifications : Tempered glass is formed by heating glass to the softening point in a horizontal tempering stove, and then quickly cooling it. Properties: 1) Safety (tempered): when broken, it spits into tiny harmless pieces. 2) Strong intensity: heat-strengthened glass is approximately twice as strong as annealed glass of the same thickness, and tempered glass is about 4 times. 3) Outstanding performance in resisting thermal stress and wind-load. 4) Tempered glass cannot be cut, drill hole and other further processed. (For details, please refer the technical specification)

Supply & Installation of Designer Metal Double door covered with Preformed textured RIGID PVC coated GI sheet:- Door Size : 1500mm X 2400mm With door hinges and locking arrangements and both way handle. Prepare with rigid thermo fused film metal panels. Specification: 0.6mm thick Metal panel sheets, cavity filled with honeycomb inside adequate quantity. Material of the partition and that of metal door will remain the same. (For details, please refer the technical specification)

Supply & Installation of Designer Acoustic Metal False ceiling with linear planks 1) Factory made acoustic modular metal false ceiling of powder coated panels. Make shall comprise of perforated and non perforated metal panels made through CNC laser Cutting, bending & punching. Panel shall be of 0.6mm CRCA sheet of approved powder coating finish. Panels shall be designed to achieve shape and design as per the design consultant with the combination of acrylic panels with lights, designed to enhance visual feel, with provision for easy installation and maintenance, integrated lighting and scope for integration of building services like HVAC and fire detection/ fighting system. 2) To ensure restriction of hazardous substances; so that the final product does not contaminate the environment and we give a healthy life to our coming generations it is necessary that the modular metal ceiling shall be RoHS certified (from UL / Intertek). 3) It is well known that metal is resistant to fire as compared to wood & fabric. However, from fire and safety point of view, to ensure that the used material is not subjected to any kind of surface treatment which provokes fire. The proposed ceiling tiles shall be Class A certified as per ASTM E84 (from UL/Intertek) for surface spread of flame and smoke generation. This is mandatory to ensure that the materials used in the interiors do not provoke fire. 4) Seismic safety of user & control room equipment is a prime concern area. The metal ceiling and metal panelling shall sustain the seismic vibrations as per design spectrum IS 1893 for zone 4 vibrations. The test shall be carried out by authorized government agency. 5) To avoid dark spots/areas in the control room it is necessary that continuous linear lights are used across the width/length of the control room. UL audit certified design feature of integrated channel in ceiling for quick installation & replaceability of continuous linear light: The ceiling system having integrated inbuilt channel for installation of cove lights and shall permit quick and easy replacement of cove light without using any tools. Replacement to be carried out within 120 Seconds per meter. 6) Structure shall be made from heavy duty powder coated CRCA steel sheet (minimum sheet thickness 0.8 to 1.6mm). (For details, please refer the technical specification)

Supply & Installation of Grid type 700mm X 620mm Snap fit Ceiling 1) Factory made acoustic modular metal false ceiling of powder coated panels. Make shall comprising of perforated and non-perforated metal panels (700X620mm) made through CNC laser Cutting, bending & punching. Panel shall be of 0.6mm CRCA Powder Coated sheet of approved color. Panels shall be designed to enhance visual feel, with provision for easy installation and maintenance, integrated lighting and scope for integration of building services like HVAC and fire detection/ fighting system. 2) As per design panel shall comprise of perforation for making false ceiling acoustically sound with fire rated acoustic fleece. 3) Metal modular false ceiling shall have Noise absorption coefficient (NRC) value 0.60 according to IS:8225-1987, ISO: 354-1985 and ASTM 423-90. 4) It is well known that metal is resistant to fire as compared to wood & fabric. However, from fire and safety point of view, to ensure that the used material is not subjected to any kind of surface treatment which provokes fire. The proposed ceiling tiles shall be Class A certified as per ASTM e84 (from UL/Intertek) for surface spread of flame and smoke generation. This is mandatory to ensure that the materials used in the interiors do not provoke fire. 5) To ensure restriction of hazardous substances; so that the final product does not contaminate the environment and we give a healthy life to our coming generations it is necessary that themodular metal ceiling system shall be RoHS certified (from UL / Intertek). 6) Ceiling Plank 6.1) Light fitting can be defined as per the LUX requirement. 6.2) It shall have Laser cut circular hole for light fixing as per defined lux requirement and approved layout. 6.3) Non-perforated tile slots to be punched to accommodate AC grills. (For details, please refer the technicalspecification)

Supply & Installation of Calcium Silicate Board Ceiling Material Plain Calcium Silicate acoustic Boards for false ceiling with 8mm Approx. thick, Structure for underside of suspended grid formed of GI perimeter channels. Wood screws and metal expansion raw plugs for fixing with wall. Plastic emulsionpaint of approved make and shade for finishing surface of Calcium Silicate Boards. Specification: Calcium Silicate Board is manufactured from a mixture of Portland cement, fine silica, special cellulose fibers and selected fillers to impart durability, toughness, fire and moisture resistance. (For details, please refer the technical specification)

Supply & Installation of LED Ceiling light LED office General Lighting Solutions which offers excellent energy saving and maintenance free operation. The luminaire has a slim design which is suitable for recessed mounted application for office Spaces. Powered by Long lasting LED light source and high efficiency optical system the luminaire offers a uniform and uninterrupted Lighting. Suitable for modular Ceiling systems of 2' X 2' Grid Ceiling. 1) Light source: LED 2) Lumen output: 3000 – 3400 3) Light color: 3000K - 6500K 4) Power consumption: 29 to 38 W 5) Input Voltage Range (V) - 150 - 270 6) Color: White 7) LED’s life 21,500 hours @ L70 (For details, please refer the technical specification)

Supply & Installation of Round LED Ceiling light High performance LED downlighter with high system efficacy for good quality and uniform lighting. Conforms to general lighting norms for office and other indoor applications. 1) Light source: LED 2) Lumen output: 3000 – 3400 3) Light color: 3000K - 6500K 4) Power consumption: 29 to 38 W 5) Input Voltage Range (V) - 150 - 270 6) Color: White 7) LED’s life 21,500 hours @ L70 (For details, please refer the technical specification)

Supply & Installation of cove Light for designer Ceiling It will be a continuous rail of LED light, high brightness , neutral, or warm white with wall washing applications. Its slim profile and simple daisy-chain system allows high design flexibility to form long. 1. Light source: LED 2. Lumen output: 600 lm/m 3. Light color: 6500K 4. Power consumption: 3W/m to 5W/m 5. Operating Voltage Range (V) 100 –300 6. Operating Frequency (Hz) 50 ± 3% 7. Colour: White 8. Lifetime: 15000 burning hrs. (At L70)(For details, please refer the technical specification)

Supply & Installation of Wires, Switches & Conduits for ceiling lights Wires for ceiling lights inter looping and switches will be provided, consisting of PVC insulated copper conductor stranded flexible FRLS wires of 1100 volts grade of insulation in PVC conduits. Minimum size of copper conductor shall be 1.5 sq. mm for lighting and 2.5 sqmm for power. color of wires shall be Red/Yellow/Blue (or as per Local Standards) for the all single phases, Black for neutral and Green for earthing. (For details, please refer the technical specification)

Supply & Installation of Plastic emulsion paint The surface shall be free from dust, dirt, grease and other foreign matter and shall be smooth by sand papering. The primer coat shall be alkali resistant primer or emulsion primer and shall be same manufacture as plastic paint. (For details, please refer the technical specification

Supply & Installation of Wall Putty Material for 1mm thick Putty on all exposed portions of beams, columns and walls as directed by the consultants including mixing, scraping, and levelling the surface, cleaning and complete in all respects to receive the paints & finishes. (For details, please refer the technical specification)

Supply & Installation of Designer privacy film for glass Partition/glass Door: The film to be installed on clear glass to provide the look of sandblasted glass. (For details, please refer thetechnical specification

Supply & Installation of S.S. railing with glass Fixing of 900mm high Side Fixed Handrail system including 08mm clear toughened glass railing with Customized SS 304 Railing system as per Customer approval. The glass shall be held with SS 304 stud with flat headed bolt single point spider fittings as per design. The 50 diameter SS pipe shall be held firmly with the 63.5x12 mm thick SS flat vertical bar through SS bracket at every junction with M4SS set screws. The entire assembly shall be fixed through two SS connect holder brackets. The system will be Complete as per requirement of site. (For details, please refer the technical specification)

Supply & Installation of M. S. Structure for suspending false ceiling Fabricated MS Structure required for false ceiling. (For details, please refer the technical specification)

Supply & Installation of New Modular Control Desk for Provision of 01 monitor and 01 Operator 1) Table Top: - The material of the working surface shall be minimum 25 mm thick MDF with High Pressure ANSI/NEMA LD3 certified scratchresistant Laminate. The proposed console's life cycle shall be assessed (from approved LCA consultant) for environmental impacts associated with all the stages of a product's life for cradle to grave analysis. To safeguard the desired quality of the product it is necessary that the proposed console has been tested & verified on the set of rules governing the product range. The console shall be UL Listed 2) Structure: 2.1) Made of heavy duty extruded vertical and horizontal aluminum profiles of 6005 grade. The extrusions shall be duly powder coated with 40+ micronsover all surfaces. All sheet metal parts shall be finished with a durable, black, electrostatic powder coating. The bidder shall have trademark registration certificate issued by Government of India for the console. 2.2) To allow future extension and expansion, a weld free system shall be proposed. Interconnecting joints shall not be visible. The structure shall be rigid enough to withstand BIFMA X5.5: 2014 (Latest Edition) test. The structure shall allow easy assembly of hinged shutters, slat wall, gland plate, and monitor arms in extremely rigid manner. Proposed console shall have environmental product declaration. The EPD (Environmental product declaration) of control desk shall be verified in accordance with ISO 14025 (from UL/Intertek) for Impacts on Environment by Console 2.3) Control Desk shall be tested and qualified to sustain Seismic vibrations as per design spectrum IS 1893 for zone 4 vibrations with monitor mounted on monitor arms of the console. Seismic test report of bare control desk shall be deemed unacceptable. This test shall be carried out by authorized government agency. 3) Front Edge: - UL audit certified design feature on front modular Polyurethane (PU) Edge. High density Poly Urethane Foam moulded on industrial grade aluminum core to form minimum 50mm deep tapered edge to be installed on worktop. The edge shall be mechanically replaceable within 30 minutes in case of damage or wear without opening or removing the worktop. 4) Slat Wall: - 4.1) Slat Wall Shall be made of approximately 2mm thick Extruded aluminum (6005 aluminum alloy). 5) Monitor Arm: The control desk shall feature ergonomic display mounting arms. It shall enable quick & easy replacement of VESA mounts & arm extensions as per the ergonomic requirement defined in ISO 11064. UL audit certified design feature of monitor arm assembly shall have auto lock, push & remove feature for quick release of VESA mounts and modular arm extensions for ease in maintenance and fixing of monitor by one technician within 30 seconds without using any tools 60 Shutters & Side Legs: - Front, back shutters shall be of 18 mm Laminated MDF Board with premium finish. Side leg shall be of 25mm of the same finish. 86385/2022/NFCK 38 Hinges shall have ten year’s warranty gainst manufacturing defects. Proposed console shall comply with the stringent/advanced version of BIFMA X7.1 standard. Proposed console shall be Greenguard Gold certified. (For details, please refer the technical specification)

Supply & Installation of Cabin Table 1) Work Surface: - Table top made up of 25mm thick Prelaminated MDF Board with 2mm thick PVC edge banding tape. 2) Leg: Ergonomically designed and matching with the open office concept. The leg shall be made from rectangular MS pipes 75X25 with approved finish. 3) Supports: Pipe shall be made up of 1.6mm thick 40 x 40mm CRCA Laser cut components, powder coated with the matching shade/color/finish. 4) Connector: Pipe and leg are interconnected with connector speciall designed for connecting different dimension pipe. Powder coating as per RAL shade. 5) Modesty Panel: Shall be made up of CRCA Sheet. 6) With Side Runner 7) Accessories: Flap Approx Dimensions: Table Top - 2100mm (W) x 750mm (D) x 750mm (H) Side Runner - 900mm (W) x 450mm (D) x 750mm (H) (For details, please refer the technical specification)

Supply & Installation of Cabin Table 1) Work Surface: - Table top made up of 25mm thick Prelaminated MDF Board with 2mm thick PVC edge banding tape. 2) Leg: Ergonomically designed and matching with the open office concept. The leg shall be made from rectangular MS pipes 75X25 with approved finish. 3) Supports: Pipe shall be made up of 1.6mm thick 40 x 40mm CRCA Laser cut components, powder coated with the matching shade/color/finish. 4) Connector: Pipe and leg are interconnected with connector specially designed for connecting different dimension pipe. Powder coating as per RAL shade. 5) Modesty Panel: Shall be made up of CRCA Sheet. 6) With Side and Back Runner 7) Accessories: Flap Approx Dimensions: Table Top - 1800mm (W) x 750mm (D) x 750mm (H) Side Runner - 900mm (W) x 450mm (D) x 750mm (H) Back Runner - 1800mm(W) X 450mm(D) X 750mm(H)

Supply & Installation of Cabin Table 1) Work Surface: - Table top made up of 25mm thick Prelaminated MDF Board with 2mm thick PVC edge banding tape. 2) Leg: Ergonomically designed and matching with the open office concept. The leg shall be made from rectangular MS pipes 75X25 with approved finish. 3) Supports: Pipe shall be made up of 1.6mm thick 40 x 40mm CRCA Laser cut components, powder coated with the matching shade/color/finish. 4) Connector: Pipe and leg are interconnected with connector specially designed for connecting different dimension pipe. Powder coating as per RAL shade. 5) Modesty Panel: Shall be made up of CRCA Sheet. 6) With Side Runner 7) Accessories: Flap Approx Dimensions: Table Top - 1500mm (W) x 750mm (D) x 750mm (H) Side Runner - 900mm (W) x 450mm (D) x 750mm (H) (For details, please refer the technical specification)

Supply & Installation of Medium Height Storage 1) Top and Shutter - made up of 18mm thick MDF Board with 2mm thick PVC edge banding tape. 2) Remaining Structure: made up of MS powder coated finish. Approx Dimensions: Table Top - 900mm (W) x 450mm (D) x 1200mm (H) (For details, please refer the technical specification)

Supply & Installation of 3 Seater Sofa With Wooden Frame, SS Pipe Legs, Seat Back Leatherite Tapestry. (For details, please refer the technical specification)

Supply & Installation of Center table Center Table, SS Pipe Frame Chrome Finish, Toughened Glass Top, 12mm Thick, Size :1200 x 600mm. (For details, please refer the technical specification)

Supply & Installation of Operator Chair High Back, Mesh Back, Cushion PVC Headrest & Silver Epoxy Backbone, Synchronized Mechanism, Upgraded Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong Nylon Base, With Black Fabric Seat & Mesh. (For details, please refer the technical specification)