Nuclear Fuel Complex Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Nuclear Fuel Complex - NFC Tender
Pipes and Pipe Related Activities
Eprocure
Opening Date22 Sep 2021
Closing Date18 Oct 2021
Tender Amount₹ 3,12,00,000
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_NFC_649197_1Bid Award Id
ViewTender No
C/1250/2021Tender Authority
Nuclear Fuel Complex ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
b) From 1.50 m to 3.00 m depth from average ground level.
8
-
-
Earthwork excavation in foundation/plinth beams in soft rock upto the depths specified below including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a distance of 50 m etc., complete.
-
-
-
a) Upto 1.50 m depth from average ground level.
95
-
-
b) From 1.50 m to 3.00 m depth from average ground level.
3
-
-
Excavation in foundations in hard rock by chiseling, wedging or any other agreed method upto the depths specified below including dressing of sides and ramming of bottoms, including getting out the excavated rock, filling extra cut pockets with cement concrete 1:4:8 using 20 mm coarse aggregate at no extra cost to the Department, stacking useful stone, disposing spoil within a distance of 50 m.
-
-
-
a) Upto 1.50 m depth from average ground level.
655
-
-
b) From 1.50 m to 3.00 m depth from average ground level.
18
-
-
Excavation in TRENCHES for pipes, sewers, etc in all soils except soft and hard rock from average ground level including dewatering if necessary, dressing bottom to required level, profile/slope, back filling in trenches with selected excavated materials in layers not exceeding 250 mm, consolidating, leveling, clearing of all the areas involving excavation of all grass,rank vegetation, shrubs,bushes,cutting of trees upto 300mm grith measured at 1.0 mtr above ground level disposing the spoil within a distance of 50m for internal and external Rcc drain pipes, storm water drains, electrical cables trenches etc.,
-
-
-
a) Upto 1.50 m depth from average ground level.
150
-
-
b) From 1.50 m to 3.00 m depth from average ground level.
10
-
-
Excavating, supplying and filling of local earth by mechanical transport also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete as specified and directed
700
-
-
Supplying & filling murrum/crushed sand brought from outside in floors, trenches, plinth, sides of foundation etc., in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m
150
-
-
Lead charges for the 1 KM or part thereof for additional lead over the initial lead of 50 m by mechanical transport, including loading, unloading, stacking, the disposable soil, rock etc., Note: Measurement of lead charges will be based on truck measurement with a deduction of voids @20% and 50% for soils and rock or debris respectively
-
-
-
a) For soil for 1KM lead.
100
-
-
b) For Debris/rock 1Km lead
600
-
-
II. CONCRETE (PLAIN AND REINFORCED) :
-
-
-
Plain Cement Concrete 1:3:6 using Portland Pozzolana Cement conforming to IS 1489 Part-1 (M/s. ACC, Ultra Tech, Birla, Ambuja make) with crushed stone sand and graded stone aggregates of 20mm maximum size at all depths/heights below/above plinth level including consolidation, finishing smooth/broom finish as applicable, curing, etc., but excluding Formwork, complete as specified and directed.
175
-
-
Reinforced Cement Concrete by insitu mixing using Weigh Batching or RMC of Ultra Tech, Birla Ready Mix of Grade M - 35 (Minimum Cementitious Content not less than 350 Kg/Cum) up to specified level using Portland Pozzolana Cement conforming to IS 1489 Part-1 (M/s. ACC, Ultra Tech, Birla, Ambuja make) with crused stonesand and graded stone aggregates of 20mm maximum size including mixing superplasticizer of brand M/s. Fosroc, Demech, Huntsman, Pidilite, Sunanda Chemicals, Agro Chemicals, MBT in proportion as per Manufacturer's Specifications, Pumping / Lifting of concrete to the required heights, Concrete laid to proper level, profile and slope, placing concrete, consolidation, finishing, curing, etc., but excluding Formwork as specified and directed.
-
-
-
a) Below plinth level using max 20mm aggregate
195
-
-
b) Above plinth level using max 20mm aggregate
275
-
-
Reinforced Cement Concrete (RCC) by insitu mixing using Weigh Batcher or RMC of Ultra Tech, Birla Ready Mix of Grade M-25 (Minimum Cement Content 330Kg/Cum) using Portland Pozzolana Cement conforming to IS 1489 Part-1 (M/s. ACC, Ultra Tech, Birla, Ambuja make) with sand and graded stone aggregates of 20mm maximum size including mixing superplasticizer of brand M/s. Fosroc, Demech, Huntsman, Pidilite, Sunanda Chemicals, Agro Chemicals, MBT in proportion as per Manufacturer's Specifications, Pumping / Lifting of concrete to the required heights, Concrete laid to proper level, profile and slope in panels of convenient size by alternate/staggered panels, placing concrete, consolidation, finishing, curing, etc., for Grade Slab, etc. but excluding Formwork as specified and directed. NOTE:- The blended cement i.e., PPC shall not have more than 25% of pozzolanas.
70
-
-
Casting and fixing in position precast reinforced cement concrete covers of M-20 required size in RCC insitu mixing BY WEIGH BATCHER using PPC Cement conforming to IS 1489 (M/s. ACC, Ultra Tech, Birla, Ambuja make) graded stone aggregate of 10 mm maximum size at and at all depths and heights below and above plinth level including mixing superplastizer (M/s. Fosroc, Demach, Huntsman, Pedilite, Sunanda Chemicals, Agro Chemicals, MBT) in proportion as per manufacturer’s specifications including necessary shuttering, providing and fixing cover blocks of required sizes, consolidation finishing as specified, curing, making casting yard and curing tank, stacking carefully at casting yard and transporting to the site of use placing in position as shown in drawings, aligning, leveling, making good all the damaged surfaces etc., but excluding the cost of reinforcement as specified and directed.
12
-
-
III. FORM WORK :
-
-
-
Providing centring and shuttering using 12mm thick prelaminated plyboard including strutting, propping, staging made out of steel frames/H-frames/Steel Pipes/Cup and Lock System etc., and removal of the same as required including chamfers, splays, keys, wedges, nails, bracings, brackets and applying One (1) coat of shuttering oil (Cemol/Fosroc make/any other approved equivalent) on all shuttering surfaces coming in contact with concrete, etc., if required, for insitu Reinforced Concrete and in Plain Cement Concrete works complete as specified and directed.
-
-
-
a) Below and Upto Finish Floor Level
975
-
-
b) Above Finish Floor Level
1700
-
-
IV. REINFORCEMENT & STRUCTURAL STEEL
-
-
-
Supply, fabrication and erection of Reinforcement bars of grade Fe-500D for Reinforced cement concrete items at and at all depths and heights below and above plinth level with high yield strength deformed bars confirming to IS 1786 with TM Treated steel of Tata, Vizag,Sail make, including transport to site, loading and unloading, making fan hooks of required shape, dowels for bonding masonry, transporting steel to site, decoiling, removing of scales, straightening, cutting, bending, fixing bars with chairs, space bars wherever required, in position with two strings of 18 gauge soft drawn annealed MS binding wire inclusive of its supply etc., complete as specified and directed.
95
-
-
Supplying, fabricating, erecting and fixing in position, insert plates/ embedded plates/pipes of GI in heavy quality conforming to relevant BIS2062/ 1239 of required shape and size, welding anchoring legs not less than 12mm dia MS rods, placing in position in concrete while casting, including painting with one coat of approved anti corrosive paint of shalimar product for embedded portion of pipe as per drawing in line, level and plumb complete as directed.
5
-
-
V. STONE MASONRY :
-
-
-
Random rubble stone masonry using approved local stones in foundations/pedestals and plinth at and at all depths below finished floor level in cement mortar 1:6 including simultaneous flush pointing with the same mortar, bond stones, curing, etc., using crushed sand of grade conforming to BIS 2116, complete as specified and directed.
10
-
-
VI. BRICK MASONRY :
-
-
-
Brick work using quality flyash (non modular) cement bricks of class designation 7.5 conforming to IS12894 using cement mortar 1:6 using crushed sand of grade conforming to BIS 2116 at and at all depths below plinth level in foundation and in plinth, storm water drains, etc., simultaneous pointing with same mortar below ground level, and ranking out joints above ground level, curing etc., complete as per specifications and as directed for sub structure etc.,
50
-
-
Brick work using quality flyash cement brciks of class designation 7.5 conforming to IS12894 using cement mortar 1:6 using crushed sand of grade conforming to BIS 2116 at all depths and heights below and above plinth level including pilasters, steel / tubular scaffolding, raking out joints, curing etc., complete as per specifications and as directed in super structure.
225
-
-
Half brick masonry using flyash cement bricks as of 7.5 grade in partition walls in cement mortar 1:4 using crushed sand of grade conforming to BIS 2116 at all depths and heights below and above plinth level including scaffolding, raking out joints, curing, etc., complete including providing stiffeners of reinforced cement concrete 1:2:4, 115 mm x 75 mm size at every 900 mm height, necessary formwork, curing, etc., complete as per specifications and as directed but excluding reinforcement.
700
-
-
VII FLOORING :
-
-
-
Construction of Granular sub-base by providing HBG material conforming to Grading-ii of MoRTH Table 400-1 including cost, (excluding seigniorage) charges and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavatopr/approved means at OMC and compacting with suitable means to achieve the desired density etc., complete for finished item of work as per MoRTH Specification 401(5th revision and as directed by Engineer-in- Charge. Note: Measurement for payment will be made based on levels on compaction of layer ).
125
-
-
Providing and laying non-skid ceramic floor tiles of size 300 x 300 mm (Thickness to be specified by the manufacturer ), of Ist quality conforming to IS: 15622, of Johnson&Johnson/Somany/Regency/Rak ceramics or approved make , in all colours, shades, laid on 20mm thick cement slurry mortar 1:4 (1 Cement : 4crushed stone Sand), jointing with grey cement slurry @ 3.3 Kg/sqm including pointing the joints with white cement and matching pigments etc., complete for toilets.
70
-
-
Providing and fixing Ist quality ceramic glazed wall tiles of size 200x300/300x300x6mm (Thickness to be specified by the manufacturer), conforming to IS: 15622 to be, of Johnson&Johnson/Somany/Regency/Rak ceramics or approved make, in all colours, shades of any size as approved by Engineer- in- charge , in dados, over 12mm thick bed of cement mortar 1:3 (1 Cement: 3 Coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
210
-
-
Providing/flxing flexible Heavy duty PVC flooring and skirting using 2mm thick PVC rolls conforming to IS 3462, manufactured by M/s. Premier/ Armstrong/ Royal house of approved shade. The pattern & design, repairing & leveling the patches of existing floor with any approved filler including fixing the new rolls to different types of floors with Fevicol SR 998 or equivalent approved synthetic adhesive as per manufacturer's specifications including cutting of rolls to required shape and size. Rolling with 20kg roller, providing V-groove and welding all joints using approved vinyl electrodes conforming to IS 8004, smoothening and cutting the welded beads, rolling over joints if required in line, level including cost of all materials and labour etc., complete as directed by the Engineer-in-Charge.
22
-
-
Providing and laying double charged vitrified floor tiles in 600x600 sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of M/s Somani/ Khajaria/ Jhonson&jhonson/ AGL make, in all colours and shades, laid cement mortar , jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. In flooring with rustic/matt finished/ 600X600 mm or equivalent approved sizes of double charged vitrified tile of pattern ,design and colour laid over 20mm thick cement mortar bedding 1:4 ( 1 cement : 4 M.sand) b) In skirting laid over 12 mm thick CM 1:3 M sand as backing for flooring and skerting
-
-
-
a) For flooring
440
-
-
b) For skarting
35
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite stone for treads/ risers /steps / ramps of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc.including nosing, making groves for slip resistance as per drawings complete at all levels.
60
-
-
Cement concrete flooring IPS 40 mm thick 1:2:4 (1 cement : 2 coarse Msand : 4 graded stone aggregate) with 10mm thick nominal stone aggregate finished with a floating coat of neat cement, including cement slurry, including the cost of nosing of steps for gas bank etc. of guest house etc. complete.
110
-
-
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compated bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. Complete all as per direction of Engineer-in-Charge for 60mm thick cement concrete paver block of M-35 grade with approverd colour,design &pattern.
75
-
-
VIII. DOORS, WINDOWS & ROLLING SHUTTERS ETC :
-
-
-
Supplying and fixing in position approved motor automatic operated (push & pull) steel rolling shutters made from M.S. lathes of not less than 1.25 mm thick including supplying and fixing all necessary fixtures, fittings, top hood, guide channels, shutter suspension shaft not less than 6", ceiling strips providing approved quality of ball bearings, locking arrangements, handles, lugs, cutting, drilling necessary holes in concrete, grouting lugs with cement concrete 1:2:4, including providing and fixing not less than 1.0HP motor of Crompton Greaves, L&T or any approved equivalent along with other accessories for On and Off, level switch connected operatable, applying one shop coat of approved Zinc chromate primer and two coats of synthetic enamel paint complete as shown in the drawing and as directed (measurement for rolling shutters will be as per the structural openings, hoods shall not be measured separately).
25
-
-
Providing and fixing factory made single extruded WPC ( Wood polymer Composite ) solid door/window/ceosetory windows & other FRAMES / CHOWKHAT comprising of virgin PVC polymer of K value 58-60 ( Suspension Grade ), calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum , screw withdrawal strength of 2200N (Face ) & 1100 N ( Edge ) , Modulus of Elasticity 900 N/mm2 and resistance to spread of flame of Class A Category with property of being termite/borer proof, water / moisture proof and fire retardent and fixed in position with M.S hold fast / lugs / SS dash fastners of required dia and length complete as per direction of Engineer in Charge. ( M.S hold fast / lugs or SS dash fastners). Note : For WPC solid door/window frames , minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
-
-
-
a) Frame size 50 x 100 mm.
38
-
-
Providing and fixing factory made single extruded wpc ( Wood polymer Composite ) solid plain flush door shutter of required size comprising of virgin PVC polymer of K value 58-60 ( Suspension Grade ), calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) having minimum frame density of 650kg/cum , screw withdrawal strength of 1800N (Face ) & 900 N ( Edge ) , Modulus of Elasticity 900 N/mm2 and resistance to spread of flame of Class A Category with property of being termite/borer proof, water / moisture proof and fire retardent, include providing and fixing with stainless steel butt hinges of required size with neccessary full body threaded star headed counter sunk S.S Screws, for each door complete as directed. For toilet doors all as per direction of engineer in Charge.
-
-
-
a) 30 mm thick.
13
-
-
Supplying and fixing in position at all floors integrated bronze anodised matt finished [15 micron thick], aluminium section [extruded] for aluminium Doors / windows (sliding/movable) /mesh windows /ventilators/ top hung/ fixed / grill/ adjustable louvered/ windows/ fixed partitions as per drawing of approved manufactures with extruded sections of Jindal / Indal / Aluminax make using sections with size and weights as shown in the drawing, for frames and shutters [including wastages if any] conforming to relevant I.S specifications with all approved Bronze anodised aluminium fittings and accessories, locking arrangements, 2 / 3 rollers with ball bearings for sliding shutters of approved quality all as shown in the drawing, including providing and fixing aluminium channel beading / glazing clips fixed with necessary bronze anodised screws, grouting the gap with filler of thermocole beading /polymer variety & GE sealant etc. all complete generally as per drawings, specifications etc., all as directed by Engineer in charge. but excluding the cost of glazing, which will be paid separately.
Note: Approval of the Dept. for the complete design and shop drawing shall be obtained before commencement of the work.
620
-
-
Providing and fixing glazing with 4 mm thick plain float glass of approved quality (Atul, Modiguard, Triveni, Hindustan Pilkington) including PVC/EPDM lining as per the drawing and as directed for window shutters and ventilators.
65
-
-
Providing and fixing glazing with 5 mm thick plain float glass of approved quality (Atul, Modiguard, Triveni, Hindustan Pilkington) including PVC /EPDM lining as per the drawing and as directed for door shutters.
12
-
-
Providing wood work with CP teakwood in frames for doors & cupboards using II class teakwood at all heights above plinth level wrought framed and fixed in position including providing and fixing with suitable size of coach screws wherever required / M.S. hold fasts of size 40 mm x 3 mm and 200 mm long, bent to shape embedded in cement concrete 1:2:4 blocks for door frames, fixed in position with necessary lugs rawl plugs and screws and coach screws, applying one coat of approved wood primer to the exposed surfaces of door frame and two coats of bituminous paint to the surfaces of frames in contact with masonry/concrete, etc., complete as indicated in drawings and as directed.
1.2
-
-
Providing and fixing in position double/single leaf flush door shutters of solid block board core, 35 mm thick, BWR grade, at all heights above plinth level internally lipped with second class teakwood, 25 mm deep along all edges of shutters bounded with water-proof type phenol formaldehyde synthetic resin, hot pressed, Chemicaly treated and pre-lamination of required design, colour and pattern / teak vineer on both faces/ requisite finish providing and fixing under pressure with approved type adhesive 200 x 150 mm laminated sheet on both sides where mortice lock is fixed including providing and fixing 2nd class teak wood rebate at meeting junction of shutters in case of double door shutters, including providing &fixing ISI marked 3 nos SS butt hinges with SS pin size 125 x 63 x 1.9 mmwith screws, &fixing hinges supplied under relevant item to shutter and frame and complete generally as shown in drawings and as specified and directed for single door shutter / double door shutters.
50
-
-
Providing and fixing in position of 2nd class teak wood of Architrave of finished section 15x20mm to doors at all floors as per drawing including providing and fixing wood screws at 600mm C/C with french polish with malamine coating etc complete as directed.
130
-
-
Supplying and fixing to wooden doors at and at all heights above plinth level approved 6 lever mortice locks of Godrej /Everite make or approved equivalent make comprising brass body and all parts including sticking plates made of brass, stainless steel keys in duplicate, a pair of mortice lock handles of approved pattern of Godrej make or its approved equivalent make with approved cadmium plated brass screws of appropriate size etc., complete as directed to single/double shutters for all doors
21
-
-
Supplying and fixing to doors at and at all heights above plinth level approved best quality anodized extruded aluminium hanging floor door stopper (twin rubber stopper) with rubber cushion (anodic coating not less than grade AC 10 as per IS 1868))transparent or dyed to required colour and shade, with necessary screws etc., complete for twin rubber stopper for all doors.
27
-
-
Supplying and fixing to wooden doors etc. and at all heights above plinth level approved anodized extruded aluminium tower bolts conforming to relevant IS specifications (‘Classic’ or its approved equivalent) with approved cadmium plated brass screws of appropriate size etc., complete as directed.
-
-
-
a) using 250 mm long
25
-
-
b) using 150 mm long
10
-
-
Supplying and fixing to wooden doors at all heights above plinth level approved anodized extruded aluminium handles with round grip and face plate conforming to relevant IS specifications and with ISI marking ‘Classic’/JYOTHI or approved equivalent and of size 125 mm (grip) with approved cadmium plated screws of appropriate size etc., complete as directed.
14
-
-
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate with stainless steel cover plate minimum 1.25 mm thickness etc. complete as per the direction of Engineer-in-charge.
1
-
-
Supplying only approved anodized extruded aluminium heavy quality butt hinges generally conforming to IS specifications CLASSIC, JYOTHI make or approved equivalent make) of size75x45x3.2mm with cadmium plated wood screws of appropriate size etc., complete as directed
72
-
-
Supplying and fixing at and at all heights above plinth level hydraulic door closures of ‘EVERITE’/Godrej make or approved equivalent confirming to IS 3564 with all fixtures, fittings and approved screws of appropriate size etc., complete as directed.
23
-
-
Supplying and fixing to wooden doors approved anodized aluminium aldrop conforming to relevant IS specifications and with ISI marking classic/ J.S.E. (ECIE) make or any approved equivalent of size 250 x 19 mm with suitable approved CP brass screws, machine screws or bolts for securing clamps from inside etc., complete as directed.
5
-
-
Providing and fixing of 6 mm thick cement particlate boards in the aluminium door shutters panels/partitions of HIL or bison make including cutting to size, wastage, pre-laminated particle board with decorative lamination on both sides, including material and labour etc. all complete
4
-
-
Providing and fixing pressed steel door frames and shutters , of PROFILE - B conforming to IS: 4351, with Frame GI 1.20 mm , Shutter : GI 0.80 mm thick . Frame profile - 100 x 57 mm including ball bearing butt hinge ( SS304 grade), of size 100x75x3 mm with screws, Motrise sash lock (H9-GU-BKS 2160, 65 BS/72/9 mm) , Euro profile 5 pin cylinder 5702, 70mm key , lever handle LT 001, 19 dia with roses & escutcheon (SS304) including painting with one coat of zinc primer and two coats of synthetic enamel paint and as directed by Engineer -in-charge..
6
-
-
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1866 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. ( Only weight kg grill to be measured for payment) for windows.
200
-
-
IX. PLASTERING AND POINTING :
-
-
-
Cement plastering 6 mm thick for ceiling with cement mortar 1:3 finished smooth finish including hacking of concrete surfaces, preparation of surface, steel/tubular scaffolding, curing, etc., complete as directed.
650
-
-
Cement plastering 15 mm thick for internal walls in cement mortar 1:4 finished smooth and at all heights above plinth level over brick walls or concrete surfaces including making necessary grooves in between junctions of brick masonry and RCC and also other places wherever required over brick walls or concrete surface, preparation of surface, structural grooves if necessary, steel/tubular scaffolding, curing, etc., complete as directed.
1870
-
-
Sand faced plaster 20 mm thick in 2 coats over exterior masonry and concrete surfaces at and at all heights above plinth level as given below with base coat in cement mortar 1:4 with approved integrated water proofing compound @ 2% by weight of cement, of M/s. Fosroc/Demach/ Huntsman/ Pedilite/ SIKA Qualcrete / MBT or as per manufacturer’s specifications, 12 mm thick and finishing coat in CM 1:3, 8 mm thick, final rendering, making necessary structural grooves, bands, drip moulds as required, double steel/tubular scaffolding wherever necessary, hacking of concrete surfaces, curing, etc., complete as directed.
800
-
-
Providing cement based putty of thickness for internal surfaces not less than 1mm of M/s Birla/ JK make at all heights above plinth level,on brick wall/ concrete surfaces, scaffolding, finishing smmoth including filling cracks with sutitable filler complete as directed.
2520
-
-
X. WATERPROOFING :
-
-
-
Providing and laying integral cement based water proofing treatment of average thickness of 110mmm ( minimum 65mm thick) including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement slurryusing 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
Note:- 1) The treatment shall be tested by ponding water for a period of 10 days. If due to location of rain water pipes the average thickness of treatment exceeds 110 mm for easy flow of water the extra brickbat coba will be paid as extra item and the rate for the same to be got approved from the Department before execution 2) The waterproofing treatment is to be guaranteed for bone-dry condition for a period of 10 years in the prescribed proforma.
3) The measurement for payment shall be the entire area of terrace covered by the treatment measured between brick/concrete parapets without plaster and the area of vatas calculated by taking the length of vatas and the height above the finished level of the terrace.
690
-
-
Filling in bath, W/C, toilet, depressed areas with water proofing brick bat coba of the agency approved by the Dept. at all floors and locations upto the required level and making the surface finished suitable to receive floor finish etc. all complete as per drawings and water proofing agency's specifications & as directed by the Engineer in charge.
10
-
-
Water proof plaster in cement mortar 1:3 ,with waterproofing compound make of ( M/s Fosroc , MBT, Sika, Sunanada Chemicals etc.) @ 2% by weight of cement including scaffolding, curing, hacking of concrete surfaces etc. Complete a) 15 MM thk for underground drains etc.
310
-
-
Providing and fixing of approved quality heat resistant terrace tiles of size 300x300x20mm with SRI78 on a pre-waterproofed and finished surface of terrace in 20mm thick cool mortar proportionately mixed with white cement and water in ratio as per approved manufacturer's specifications and grouting with white marble powder in the ratio 1:1 / any other specified waterproof tile grout and polishing complete surface upto 3 cuts with skirting of 150mm of tile provided along the parapet walls, all complete.
690
-
-
XI. PAINTING:
-
-
-
Water proofing cement paint in two coats in all floors and locations for concrete /wall surfaces in shafts paint of Asian, Pidilite, Johnson & Nicklson, Nerolac, berger,including sand papering and cleaning the surfaces, filling up cracks and crevices if any with approved putty, scaffolding etc. complete all as per specifications and as directed by the Engineer-in-charge for ducts etc..
50
-
-
Painting with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre of approved brand and manufacture (equivalent product- Apcolite premium emlsion) paint of Asian, Pidilite, Johnson & Nicklson, Nerolac, berger,including applying additional coats wherever required to achieve even shade and colour
2510
-
-
Painting exterior walls on sand faced plaster with two coats of antifungus and emulsion paint having 100% acrylic, of Asian, Pidilite, Johnson & Nicklson, Nerolac, berger, of exterior quality haying 100% acrylic, of approved shade including preparing surfaces, external putty of Birla or its approved equivalent wherever required, applying one coat of approved primer as per manufacturers specification, applying and filling cracks or wherever required for external filler, curing, scaffolding, cleaning, etc., complete.
950
-
-
XII. MISCELLANEOUS ITEMS :
-
-
-
Providing and fixing SS railing made out of commercial chromium steel tubes SS 304, of various diameters, of approved make, 2 mm wall thickness, pattern as shown in drawing/as directed including supplying or fabricating, fittings like SS bends, tees, etc., welding the pipes using TIG welding or any other approved method, grinding/buffing the welded joints smooth, erecting the railing in position in line, level and plumb, fixing tailing in position by grouting/or any approved system, cleaning, polishing the joints if required, scaffolding etc., complete all as specified and directed.
150
-
-
Providing and fixing CI gratings conforming to IS 1729 for rain water pipe entry mouths/filter bed, etc., including chasing making holes in existing masonry concrete surfaces, refilling with cement concrete 1:2:4 reinstating to the original conditions, painting with two coats of bitumastic paint, all in level and line complete as directed and specified for rain water mouths, filter bed.
8
-
-
Providing and fixing 110 mm n.b.un-plasticised PVC rain water pipes with necessary PVC clamps and wooden gutties of approved make conforming to IS: 13592 type ‘A’with injection moulded fittings jointing with approved synthetic adhesive seal rings conforming to IS: 5382 embedding the slab junctions leakproof testing complete in line, level and plumb all as directed.
65
-
-
Supplying, lowering, laying, mentioned below the nominal bore, RCC SPUN PIPES (Class NP2)/NP-4 conforming to IS:458 with necessary collars, laid to correct grade and levels at and at all depths below plinth level including cutting to lengths, jointing with hemp yarn and cement mortar 1:1, caulking the joints and finishing, curing, etc., complete as specified and directed.
-
-
-
a) 150mm NB NP-2
20
-
-
b) 300mm NB NP-2
25
-
-
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’
runners to be suspended from ceiling using GI. Slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4 mm GI. Adjustable rods with galvanised steelk level clips of size 85x30x0.8 mm, spaced at 1200 mm centre to centre along main 'T', bottom exposed with 24 mm of all 'T' sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.
115
-
-
Supply & fixing Polyisocyanurate foam (PIR) slabs of size 1000 x 500mm and thickness of 30mm (covered on one side with glass fibre tissue/ Aluminium foil having 50mm overlap) conforming to IS:12436 having density not less than 32 kg./ Cu. M., thermal conductivity (K- value) not more than 0.023 w/mk measured at 10 deg. C; classified as 'Class I' for surface spread of flame as per BS 476, part 7; fixed to R.C.C. slab by hot blow grade bitumen of 85/25 grade or cold adhesive CPRX applied over a coat of bituminous primer @ 0.5 Litres/ Sq.m.. applied to bare R.C.C. surface and to the two surface of each PIR panel and pressed in position (while the bitumen is still tacky) with the help of G.I. screws (No. 8 x 75mm long) fixed into rawl plugs (holes in R.C.C. for the rawl plugs shall be drilled prior to applying coat of bituminous primer) of size 8 x 25mm inserted (5 nos. for each slab- One each at 4 corners and one at center) and G.I washers 25mm dia; including covering the overlaps with approved quality sealing compound (MAS-94 or equivalent); chicken wire mesh 24G x 19mm shall then be fixed to G.I screws and tightened with lacing wire; including preparation of surface consisting of cleaning R.C.C surface of all dust, dirt and loose particles by wire brushing; etc. all complete as per approved manufacturer's standard specifications and recommendations
625
-
-
XIII: WATER SUPPLY
-
-
-
Supplying, laying and fixing CPVC pipes confirming to ASTM D2846, SDR -13.5 at a working pressure of 320 PSI at 23 deg C, complete with all fittings and clamps, Fittings (Conforming to relevant IS/ASTM/BS code), in trenches, floors, walls including embedding if necessary, joining of pipes and fittings shall be done by solvent cement conforming to ASTM F-493, including bends, elbows, tees, reducers, sockets, unions and other specials, supplying and fixing with hooks in wooden plugs or embedding in walls and floors, cutting pipes to required lengths, making connections, cutting chases or holes in walls with machine & making good the same, testing, etc. all complete as per drawings, specifications and directions of Engineer-in-Charge. (CPVC pipes shall meet National Sanitation Foundation
(NSF) requirement for drinking water system)
-
-
-
a) For the following Nominal Bore (NB) pipe: 15/20 mm
35
-
-
b) For the following Nominal Bore (NB) pipe: 25 mm
25
-
-
c) For the following Nominal Bore (NB) pipe: 40 mm
30
-
-
d) For the following Nominal Bore (NB) pipe: 50 mm
50
-
-
Providing and fixing in position heavy pattern screw down Gun metal ball valve with ball SS confirming to IS.778 with hand lever at top including testing for 10 kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc. as per specification.
-
-
-
a) 20mm nb for coolers
1
-
-
b) 25 mm n.b.
3
-
-
c) 40 mm n.b.
2
-
-
d) 50 mm n.b.
2
-
-
Providing hoisting and installing at required elevation double layered moulded HDPE cylindrical vertical water storage tanks of various capacities of Sintex or Duracon make, with suitable SMC cover at top, coated with UV coating/layer including the cost of labour for making hole in the storage tank for inlet, outlet, scour and overflow and the required fittings/ gaskets, float valve including making necessary supporting system complete as directed
2000
-
-
XIV. DRAINAGE
-
-
-
Providing & laying UPVC under ground drainage pipes & Fittings of Sudhakar/Nandi/Godavari make for storm water drains& sewerage pipes of following size conforming to IS:15328 to proper level & grade, jointing including prviding coupler with cement solvent / welded joints / as per manufacturer's requirement, including encasing the pipe alround using cement concrete 1:3:6 complete to an offeset of D/2 where D= dia of pipe all as per specifictions, drawing and as directed by the E.I.C. item includes Providing and fixing UPVC fittings such as Bendes, Tees & Y, Reducers, Blanking Plugs, Couplers, Adaptors etc
-
-
-
a) 110 mm DN (SN 8kN/m²-SDR34)
20
-
-
b) 160 mm DN (SN 8kN/m²-SDR34)
50
-
-
Supplying and fixing following size uPVC UV-Stabilised soil / waste quality pipes and fittings ( SWR ) for soil, waste, vent, antisyphonege, HVAC waste pipe and rain water pipe lines consisting following items of work:- i) Providing and fixing uPVC UV-Stabilised Soil / waste pipe as per IS:13592 and IS:14735 Grade-B laid in floor & on Exposed faces of wall of Supreme make ii) Fixing the pipeline vertically by Metal clamps with rubber seal of Supreme make Cat. No. SWRMCR 1 to 6. iii) Providing and fixing uPVC cowl at the top of soil, waste water & vent pipe line. iv) Laying the pipe below floor / ground to proper slope and gradient for making connections of soil / waste water pipe line with inspection chamber or Manhole, including the cost of cement mortar, cement concrete, water proofing compound etc. v) Jointing the pipe with Solvent Cement & Rubber ring gasket with making holes in walls / floor grooving and redoing the same and brick support etc. Giving water-tightness test for the pipes laid as per codal provisions. Providing Ring Joint pipes at verticals and solvent cement jointed pipes at consealed locations. vi) Necessary cutting to the required length including short pieces, fittings with & without door, assorted fittings such as plugs, tees, couplers, reducers, cross tees, reducing tees, elbows, bends, cleaning pipe, single & double Y, vent cowl, gaskets, offsets, Tank / WC connectors etc.
-
-
-
a) 75 mm n.b. pipes
25
-
-
b) 100 mm n.b. pipes
20
-
-
Providing uPVC Gully Trap of 150 X 100 mm size with 100 mm outlet with Grating of approved Make, placing at correct position, embedding in cement concrete 1:2:4, 100 mm thick alround complete.
6
-
-
Construction of rectangular CHAMBERS of internal clear dimension of mentioned below ( internal clear) in 230 mm thick brick masonry in cement mortar 1:6 over a bed of 150 mm thick 1:4:8 cement concrete in foundation, plastering with cement mortar 1:4, 20 mm thick on inside, and all outside exposed surfaces finished with a floating coat of neat cement, 1:2:4 cement concrete for benching in slope 1 in 30 and channel finished with neat cement, brick corbelling at top if necessary to provide clear opening and providing and fixing CI cover with frame of light duty single seal pattern weight not less than 33 kgs embedded in cement concrete 1:2:4, providing and fixing PVC encaptualted MS rungs of 20mm square, each at 300 mm centre to centre if depth exceeds 800 mm, painting CI cover and frame and CI steps with two coats of bitumastic paint etc. complete-For depth of chamber not exceeding 900 mm. However minimum depth of chamber not less than 450mm
-
-
-
a) 450x600mm
2
-
-
b) 600x900mm
4
-
-
Extra over above item for depths beyond 900 mm of Rectangular chamber including providing and fixing PVC encaptulate MS rungs 200 square, each @ 300 mm C/C, staggered vertically and horizontally etc., as per specifications.
-
-
-
a) 450x600mm
4
-
-
b) 600x900mm
8
-
-
Providing and fixing HDPE pipes of 4 kg/cm2, best quality, of Godavari/Supreme/Sudhakar or approved make conforming to as per IS: 4984: Latest Edition (with Amendment) Material grade PE 100 with moulded fittings like pipe ends, flanges, blank flanges, tees etc., whever necesary jointing by fusion welding or any approved method, laying pipe line in single lengths without joints or pieces between chambers including providing inspection vents in chambers, supplying & fixing jointing materials like bolts, nuts, gaskets, testing etc., including encasing the pipe with M-30 grade concrete , necessary shuttering etc. complete as specified and directed for 75 mm n.b
75
-
-
Providing uPVC P Trap of 110 X 110 mm size having not less than 40 mm effective water seal, fixing the trap in position and connecting with waste water pipe by cement solvent / as per manufacturer's recommandation, embedding the trap in cement concrete 1:2:4 to correct level and gradient, providing and fixing 200 x 200 mm size top tile with central strainer & flat cover / flush strainer, closing the side inletes with plugs if required etc. all complete as per specification and as directed by EIC. complete as directed for Urinals.
2
-
-
Providing uPVC Floor Trap (Multifloor trap of 110 x 75 x 50 size of Supreme make Cat No. NSPHMTS04L / NSPHMT005L and 3 pc top tile & flush strainer, mat finish of Supreme make Cat No. NSPHTT201L/NSPHTT200L.) / Nahani Trap of following size having not less than 40 mm effective water seal, fixing the trap in position and connecting with waste water pipe by cement solvent / as per manufacturer's recommandation, embedding the trap in cement concrete 1:2:4 to correct level and gradient, providing and fixing 200 x 200 mm size top tile with central strainer & flat cover / flush strainer, closing the side inletes with plugs if required etc. all complete as per specification and as directed by EIC.
10
-
-
XV. SANITARY ITEMS :
-
-
-
Providing and fixing approved ORRISA PATTERN W.C. SUITE of HINDWARE Brand as per Orissa Pan (Eco) Model ' Cat. No. 20042 (or) CERA Brand Snow white colour Orissa Pan as per ' Cat. No. 2071 (BR) a) Orissa patterns W.C. best Indian make in light coloured glazed vitreous chinaware, 580 mmx400 mm with ‘P’ or ‘S’ trap.
b) PVC low level flushing cistern of 10 lts. Capacity conforming to IS:7231 with all internal PVC fittings mounted on a pair of CI brackets of heavy quality with 32 mm nb PVC bend of required length complete.
c) 32 mm nb PVC flush pipe of appropriate length with all fittings synthetic adhesive cement jointed concealed in wall.
d) 15 mm n.b. heavy quality PVC inlet connection with CP brass unious at ends
e) 15 mm n.b. heavy quality G.I. pipe and specials for overflow from cistern upto 150 mm above floor level concealed in wall and terminated with 15 mm n.b. CP brass mosquito proof jalli etc. complete
f) 15 mm n.b. screw down heavy quality C.P. bras stopcock conforming to IS: 781.
g) 15 mm n.b. heavy quality CPVC overflow pipe with specials from cistern
1
-
-
Providing and fixing EUROPEAN WATER CLOSET suite comprising Hind ware or jaguar :
a) WASH DOWN PATTERN European water closet best Indian make, in light colour glazed vitreous, with integral ‘P’ or ‘S’ trap.
b) Plastic low level flushing cistern of gleaming light colour shade, best quality, champion or approved equivalent, conforming to IS:7231 complete with all internal fittings, matching heavy quality PVC flush bend mounted on a pair of white enamel painted brackets.
c) 15 mm n.b. heavy quality PVC inlet of heavy quality connection with CP brass unions connected at ends.
d) 15 mm n.b. screw down variety heavy quality C.P. brass stop cock conforming to IS:781.
e) Solid plastic heavy quality seat with lid of approved make and colour with C.P. brass pillar hinges, conforming to IS:2548 (Part I&II).
f) 15 mm n.b. heavy quality GI overflow pipe with specials from cistern to 150 mm above floor level painted and terminated with mosquito-proof perforated cap.
2
-
-
Providing and fixing best quality WASH BASIN of size 550 mm x 400 mm with plain rims, of hinware or jaguar comprising of: a) Best Indian make wash basin in light colour glazed virtreous chinaware conforming to IS:2556 part IV supported on suitable wall brackets of heavy quality and of size mentioned above. b) One number heavy quality 15 mm n.b. C.P. brass pillar cock with Jam nut conforming to IS:1795 c) One number 15 mm n.b. heavy quality PVC inlet connection with CP brass unions at ends.
d) One number 15 mm n.b heavy quality C.P. brass stop cock. e) One number 32 mm C.P. brass heavy quality bottle trap of approved quality. f) 32 mm n.b. heavy quality G.I. waste pipe line with specials from bottle trap to nahani trap including painting with two coats of anticorrosive bitumastic paint, etc., complete.
4
-
-
Providing and fixing as per IS 2556 flat back half stall urinal of size 580x380x350 mm of M/s.Hindware/Jaguar or approved equivalent make supporting the pan on suitable heavy quality CI wall brackets, 32 mm n.b. heavy quality, approved make CP brass bottle trap with extension piece, fixing with CP brass spreader and suitable heavy quality CP brass waste coupling to urinal basin, CP brass grating, spring based flush valve for operation of water flushing etc., complete as specified and directed.
5
-
-
Providing and fixing Granite Stone slab of approved shade with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
4
-
-
Providing and fixing decorative round shaped CP brass Shower rosewith 15 or 20mm inlet of 150mm dia, of easy and clean design on GI lines with built in ball joint for directional change etc complete as directed.
1
-
-
Providing and fixing in position bevelled plain edged mirror 600 x 450mm made out of best Indian glass of 6 mm thick of approved manufacturer, mounted on plywood sheet/ plain AC sheet of 6 mm thick fixed in position with four number of CP brass screws with detachable CP brass caps, washers, rawl plugs, etc., complete as directed.
4
-
-
Providing & fixing in position following type CP fittings/ Fixtures/Faucets of 15 mm nominal dia. with ISI mark/ approved make including providing & fixing specials, wall flanges and fixing to concealed / exposed pipe line with leak proof threaded joints using tephlon tapes, testing the joints hydraulically to a pressure of 10 kg./ sq.cm, rectifying the leaky joints if any, including cleaning etc. complete all as per specifications.
-
-
-
a) Providing and fixing heavy quality fancy variety C.P. brass screw down BIB TAPS of M/S. Jaguar/Hindware make conforming to IS: 8931 on G.I. lines- size 15 mm.
10
-
-
b) C.P brass 2 Way Bib Cock with wall flange of Jaguar Cat.No. ORM 10041
2
-
-
c) Proving and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931 for 15mm nominal bore, complete as directed.
1
-
-
d) Proving and fixing in toilets Health faucet of Jaguar Make (ALD-CHR-585) or equivalent with 1 metre long Easy flex tube in chrome finish and wall hook etc., complete as directed.
2
-
-
e) C.P brass Bottle Trap, 30 mm dia. with wall flange of Jaquar cat. No. ALD 769.
6
-
-
f) Regular Body Concealed Stop cock with protection cap suitable for 15 mm pipe line of Jaquar cat. No. ALD-083 and exposed part kit with fitting sleeve, operating lever & adjustable wall flange with seal of Jaquar cat. No. ORM-10083K.
1
-
-
g) CP brass over head Shower 120 mm dia, multi function with cascade effect & wall flange of Jaquar Cat. No. OHS 1779
1
-
-
h) CP brass Shower Arm straight with wall flange of Jaquar Cat. No. SHA 49483.
1
-
-
i) Providing Wall Mixer with Provision for Overhead Shower with 115mm long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges of Jaquar product code FLR-CHR-5273UPR complete as specified and directed
1
-
-
Supplying following C.P Brass Bathroom / toilet accessories of following make and fixing on the wall using CP brass screws, rawl plugs etc. as per manufacturer's requirement all complete at the locations shown and as directed by the E-in-C.
-
-
-
a) Stainless steel Toilet Paper Roll Holder, recessed type with flap of Jaguar Cat. No.AHS - 1553
2
-
-
b) Stainless steel Soap dish, recessed type of Jaquar Cat. No. AHS -1531.
4
-
-
c) Stainless steel Towel Rail/Grab bar of Jaquar Cat. No. AHS-1507.
4
-
-
d) CP brass double Coat Hook of Jaguar Cat. No. AKP-35761P.
6
-
-
e) Liquid soap dispenser Jaquar CAN 1135N
4
-
-
f) Glass shelf 600 mm long as per Jaquar cat. No: ACN-1171N
4
-
-
g) Towel Ring square with round flange of Jaquar Cat. No. CAN 1121N
4
-
-
h) Proving and fixing SS AISI304(18/8) sink as per IS-13983 with CI brackets and SS plug 40mm, including painting of fittings and brackets. Cutting and making good the walls wherever required for 610x510x200(D) without drain board sink.
2
-
-
XVI. ROAD WORK :
-
-
-
Surface excavation not exceeding 300mm to 450mm deep for road, pavement, building area, formation etc in required camber, profile, excavating using mechanical equipment or any suitable means, filling the ditches with the good available earth, spreading, breaking clods, lumps, watering, dressing, leveling, compacting and consolidating surface with 5 to 8 tonne roller including clearing of all the areas involving excavation and filling of all grass, rank vegetation, shrubs, bushes, cutting of trees upto 300 mm girth measured at 1.0 m above ground level, etc. and disposing the spoils within a distance of 50 m as directed for area levelling/ land grading before start of work for flooring and road work.
100
-
-
Construction of Granular sub-base by providing HBG material conforming to Grading-ii of MoRTH Table 400-1 including cost, (excluding seigniorage) charges and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavatopr/approved means at OMC and compacting with suitable means to achieve the desired density etc., complete for finished item of work as per MoRTH Specification 401(5th revision and as directed by Engineer-in- Charge. Note: ( Payment will be made based on levels for finished item of work).
25
-
-
Providing and Laying in position RMC of Ultratech, Aparna, Charminar make, of grade M20 or 1:2:4 in-situ mixing by Weigh Batcher using Pozzolona Portland Cement conforming to BIS 1489 of brand M/s. ACC, UltraTech, Raasi, Birla, Coramandal, Andhra Cements Ltd., KCP using river sand and graded stone aggregates of 40mm maximum size including mixing Superplastizer of brand M/s. Fosroc, Demach, Huntsman, Pedilite Sunanda Chemicals, Agro Chemicals, MBT in proportion as per manufacturers Specifications, pumping /lifting, concrete to the required locations, concrete laid to proper camber, profile, level / slope / gradient in panels of convenient size by alternate / staggered panels, placing concrete, consolidation, finishing, applying Two (2) coats of bituminous paint at the contact surfaces of construction joints, forming Expansion Joints of 12mm thick, providing necessary form work, curing, etc., complete as specified and directed for Pavements/road .
15
-
-
Providing, fixing, filling and sealing expansion/construction joints using 12 mm thick bitumastic board manufactured by M/s. STP Ltd., or any other approved equivalent in expansion joints of cement concrete roads including cleaning the surfaces where joints are formed applying one coat bitumastic emulsion cutting the board to the required sizes placing in position filling and sealing the top of the joints with Salitex sealing compound of size 12 x 20 mm deep, using compound manufactured by M/s. STP Ltd., or equivalent including heating, pouring complete etc. in line level as directed.
1
-
-
Supplying and Fixing in position IRC Fabric SI No.4 (100 x 100 x 4mm) conforming to IS 1566 of standard make or its approved equivalent in CC road.
100
-
-
XVII. ELECTRICAL
Note: Pre Dispatch inspection & testing of following items is envisaged at manufacturer's work. The waiver for pre dispatch inspection, due to any reason, shall be at discretion of Competent authority.
1.Distribution boards 2.Wires
3.Lighting Luminaries
4.Ceiling Fan
5.Cat-6 cables
6.Elevators
-
-
-
PART A: DISTRIBUTION BOARDS Supply, installation, testing & commissioning of following readymade distribution boards, double door, IP 42 degree protection complete with necessary, MCBs, earth leakage circuit breaker (ELCB), MCCB, wireway box etc. & all as per drawings (G.A. & fabrication drawing to be got approved) and specifications relevant IS & instruction of Engineer-in-charge.
-
-
-
8 WayPPI (Seven segment)DB with following
1)63A, Four pole(FP), MCB
2) 63A, 30mA, DP RCCB -3 No. 2) 6A to 25A SP MCB – 24 nos. 3) 8 way brass neutral link -- 3 set 4) 8 way brass earth link -- 3 set Note: The circuit wiring in DB shall be as shown in drg.
4
-
-
8 way vertical model TPN MCCB DB :- 1) 125A TPN Microprocesor based MCCB with Earth Leakage Module(30mA to 3A) -1 No. Incomer
2) 25A SP MCB – 24 nos. 3) 8 way brass neutral link -- 2 set 4) 8 way brass earth link -- 2 set Note: The circuit wiring in DB shall be as shown in drg.
1
-
-
VTPN MCCB fabricated DB :- 1) 125A TPN Microprocesor based MCCB with Earth Leakage Module(30mA to 3A) -1 No. Incomer
2) 32A TP MCB – 24 nos. 3) 8 way brass neutral link -- 2 set 4) 8 way brass earth link -- 2 set Note: The circuit wiring in DB shall be as shown in drg.
1
-
-
SPN MCB fabricated DB for housing following,
1) 16A Two pole(DP), 30mA RCBO -1 No. Incomer timer and 12A contactor
2) 6A to 25A SP MCB – 8 nos. 3) 8 way brass neutral link -- 2 set 4) 8 way brass earth link -- 2 set Note: The circuit wiring in DB shall be as shown in drg.
1
-
-
MCCB/ MCB enclosure: Supply, Installation, Testing & Commissioning of following MCCB/ MCB with suitable enclosure of 2 mm thick including minor civil works to fix on the wall etc complete and all ncessary
-
-
-
a) 32 A TP MCB 30 mA RCCB
20
-
-
PART B: POINT WIRING AND SUBMAIN WIRING
Point wiring in MS conduits : Point wiring for following points with 1.1 KV grade FRLS PVC insulated multistranded copper conductor wire, MS conduits of 25 to 40 mm dia, switches sockets, metallic modular boxes, termination, cover plates etc as per specifications and drawings and as per instructions of E-I-C and as detailed below
-
-
-
Main DB / 32 A point wiring
4 Nos 6 sq.mm copper wire in 40 mm dia MS conduit with necessary pull out boxes, junction boxes etc including end temination at both the ends with additional loop wire of 0.5 m length at either ends.
20
-
-
Primary Switch Box/Out door lighting DB point
3 No. 2.5 sqmm wires(P, N & E) from DB to the Lighting switch board and to additional switches/sockets looping, if any in the same box in same circuit point.
24
-
-
Secondary Switch Box point 3 No. 2.5 sqmm wires(P, N & E) from a switchbox to the Lighting switch board and to additional switches/sockets looping, if any in the same box in same circuit point.
1
-
-
Primary Light point
2 No. 1.5 sq.mm for P& N & 1 No. 2.5 sqmm for earth wires From Switch box to the light point including 6 A switchwith, ceiling rose or angle/batton holder as per drawing. Note: Neutral wire can be laid from the nearest light/fan point of the same circuit.
41
-
-
Secondary Light point
2 No. 1.5 sq.mm for P& N & 1 No. 2.5 sqmm for earth wires From one light point to another including ceiling rose or angle/batton holder as per drawing. Note: Neutral wire can be laid from the nearest light/fan point of the same circuit.
52
-
-
Primary street light / outdoor light point
2 No. 1.5 sq.mm for P& N & 1 No. 2.5 sqmm for earth wires From DB to the wall mounted Street light point including required accesories as per drawing. Note: Neutral wire can be laid from the nearest light/fan point of the same circuit.
6
-
-
Secondary street light/ outdoor light point
2 No. 1.5 sq.mm for P& N & 1 No. 2.5 sqmm for earth wires From one light point to another including required accesories as per drawing as per drawing. Note: Neutral wire can be laid from the nearest light/fan point of the same circuit.
6
-
-
Exhaust Fan point
2 No. 1.5 sq.mm for P& N, & 1 No. 2.5 sqmm for earth wire from Switch box to the ex. fan point point along with 6 A switch, 6A Socket(near by Exhaust fan). Note: Neutral wire can be laid from the nearest light/fan point of the same circuit.
11
-
-
Ceiling Fan point
2 No. 1.5 sq.mm for P& N, & 1 No. 2.5 sqmm for earth wire from Switch box to the fan point point along with 6 A switch & 5 step regulator. Note: Neutral wire can be laid from the nearest light/fan point of the same circuit.
27
-
-
Primary Power point
3 No. 2.5 sqmm wires(P, N & E) from DB to the power point along with two Nos 16A switches and 2 Nos 16 A universal socket
39
-
-
Secondary Power point 3 No. 2.5 sqmm wires(P, N & E) from power point to the secondary power point along with 1 No. 16A switches and 1 No16 A universal sockets
46
-
-
AC point
2 No. 4 sq.mm for P& N, & 1 No. 2.5 sqmm for earth wire from DB to the AC point through & including 1 No. 20A DP MCB(10 kA breaking capacity) in metal box(at operating height) to 20 A 3 pin metal clad socket with plug top near to AC.
16
-
-
Geyser point
2 No. 4 sq.mm for P& N, & 1 No. 2.5 sqmm for earth wire from DB to the Geyser point through & including 1 No. 20A DP MCB(10 kA breaking capacity) in metal box out side tiolet(at operating height) to 20 A 3 pin metal clad socket(Industrial type)with top near to Geyser(inside toilet).
1
-
-
PART C: Earthing and LIGHTNING PROTECTION
-
-
-
Supply, installation, testing & commissioning following heavily hot dipped GI earth strip for ground conductors fixed with no.10 GI wood screws & 1-2 mm thick GI saddles with G.I machine screws or in ground at 750mm below, interconnection of earth strip with welded joints and GI nut bolts & washers, painting with two coats of metallic Aluminium paint for above ground portion & painting with two coats of black bituminous compound for earth strip in ground etc. all as per drawing, specifications and as per the instructions of the Engineer-in-charge. Note excavation for this item measured seperately & conductor used as down conductors.
-
-
-
a) 50 X 6 mm GI strip for earth mat and earthing
800
-
-
b) 25 X 6 mm GI strip with insulators for lightning protection
500
-
-
c) 25 X 3 mm GI strip
100
-
-
PART D: TELEPHONE and Network SYSTEM
-
-
-
Telephone Point Wiring: Point wiring with 4 pair CAT-6 wires copper conductor PVC insulated, in 25 mm dia rigid MS conduit (concealed in slab /wall or complete with all conduit accessories, RJ-11 telephone socket outlets with shutter in a box with connector, ferrule numbers on both side of the circuits all terminations with ferrule /lugs if required, modular box at one end, labelling all as per drawing specifications & as per instructions of E-I-C. NOTE: 1. Point wiring means 4 pair CAT-6 wires from Telephone Tag Block to assigned point including end termination of one pair at both sides and other pairs should be kept spare.
18
-
-
Telephone Tag Block (TTB) : Supply, installation, testing & commissioning of following readymade Krone connector telephone tag block box, 18 SWG MS CRCA sheet, concealed/surface mounted on MS frame of size 40 x 40 x 5mm and grouted on the wall/fixed on the column free standing type with anchor fasterners, cable end/wire way box,if required, with adequate space facility to be provided in the TTB, with front operable hinged door, neoprene rubber/cork gasket for joints, wire bunching clamps , name plate etc. all as per standards, specification, drawing & instructions of E.I.C. Note: 1) Point distribution diagram shall put in side the DB with polythene protective cover. 2) All fabrication drawings shall be got approved. 3) Disconnection module shall be Krone Part No. 69011006-02 or equivalent approved.
-
-
-
50 pair telephone tag box :
A set consisting of :
1)Disconnection module 2 /10 --5 nos.
2)Back mounting frame - 2/11 --1 nos
(C.T. box with mounting bracket )
3. Transparent dust cover -- 1 no. complete with all accessories 4. Label Holder - 1 nos.
1
-
-
Network Point Wiring: Point wiring with 4 pair CAT-6 wires copper conductor PVC insulated, in 25 mm dia rigid MS conduit (concealed in slab /wall or complete with all conduit accessories, including RJ-45 Network socket outlets with shutter in a box with connector, ferrule numbers on both side of the circuits all terminations with ferrule /lugs if required, modular box at one end, labelling all as per drawing specifications & as per instructions of E-I-C. NOTE: 1. Point wiring means 4 pair CAT-6 wires from Network JB Block to assigned point including end termination at both sides and RJ45 socket at one end with connector in a box
36
-
-
PART E: MISCELLENEOUS ITEMS
-
-
-
CABLE TRAYS: Supplying and fixing 150mm width x 100 mm depth sizes of GI perforated tray, hot dipped galvanised between 60 and 80 microns of zinc as per BS 729 carbon Steel cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required, and duly suspended from the ceiling with electro-zinc coated TF rods, wall mounting brackets etc.
20
-
-
MS Fabrication :
Supply, fabrication and installation of supports using MS channel/angle / flat/ MS rod hangers etc.including painting with two coats of primer and two coats of epoxy paint of approved shade as per instructions of EIC.
100
-
-
Supply, installation of GI pipe of B class sleeves in beams/column/slab for passing electrical cables/conduit as per instruction of E-I-C.
-
-
-
40 mm dia
20
-
-
80 mm dia
20
-
-
Supply & installation of 300 mm dia heavy duty RCC Hume pipe of class 'NP3' to be laid in ground/from concrete cable trench to ground, for passing of cables with necessary joints, concrete supports. Scope includes escavation below ground level in all types of soil/concrete road cutting/foot path cutting, nallah cutting /any RCC wall/floor cutting including back filling, dewatering, consolidation, reinstatement of excess earth within the radius of 500 m and original,disposal making good to the original finish etc. spare space of hume pipes after cable laying and spares hume pipes shall be sealed properly with fireproof materials.
30
-
-
Supply, fixing & installation of pre mixed & ready to use M/s. HILTI make firestop foam CP 620 in 300ml bottle for sealing openings in electrical shafts, Telephone shaft, raceways & cutouts, hump pipes & where ever required & as per instruction of EIC.
2
-
-
Supply, fixing & installation of pre mixed & ready to use M/s. HILTI make firestop mortar CP 636 for sealing openings in electrical shafts, Telephone shaft, raceways & cutouts, hume pipes & where ever required & as per instruction of EIC.
4
-
-
PART F: LIGHT, LUMINAIRES, CEILING FANS, ETC.
-
-
-
Ceiling Fans :
Supply, installation, testing & comissioning of following ceiling fans as per specification and instructions of E I C
-
-
-
a) EE 5 star rated 1200mm sweep ceiling fan
27
-
-
Light Luminaires & Fittings: Supply, installation, testing & commissioning of following luminaires as per drawing, specifications & as per the instruction of E.I.C.
-
-
-
a) LED Surface Mounted 1600 Lumen O/P Luminaire Similar to M/s Philips Cat. No. SM200C LED16S-6500CCT OD PSU CIRRUS MINI PRO' or Equivalent Approved
7
-
-
b) LED Surface Mounted 3300 Lumen O/P Luminaire Similar to M/s Philips Cat. No. SM365C LED33S-6500CCT OD PSU WH CIRRUS Surface Mounted or Equivalent Approved
71
-
-
c) LED Surface Mounted 2000 Lumen O/P Luminaire Similar to M/s Philips Cat. No. BN308C LED20S-6500CCT L120 PSU WH Batten or Equivalent Approved
11
-
-
d) LED bracket mounted streetlight fixture IP 66, 7000 lumens system output similar to M/s Philips BRP410 LED CW 072 MR FG SI PSU GR or Equivalent Approved
12
-
-
e) LED surface mounted bulkhead luminaire fitting having 600 lumen output similar to M/s Philips cat no. WT202 W LED 6S CW PSU S2 PC or equivalent approved.
1
-
-
f) 10W, 1x 2ft LED Tube light fitting + mounting accessories
3
-
-
Exhaust Fans:
-
-
-
Supply, installation, testing & commissioning of 225 mm dia , casette type of exhaust fans, single phase complete with blades, motor, scope includes supply of 3C copper 1.5 sq.mm. flexible chord of suitable length with louvers and fixing arrangement in window/wall as per instructions of EIC.
10
-
-
Supply, installation, testing & commissioning of 450 mm dia , Singe phase, Heavy duty exhaust fans complete with blades, motor, luvers, scope includes supply of 3C copper 1.5 sq.mm. flexible chord of suitable length with fixing arrangement in window/wall as per instructions of EIC.
1
-
-
Fan Hook Boxes
Supply, installation, testing of concealed fan hook boxes of size 150 x 150 x 75 mm deep fabricated out of 2mm thick M.S CRCA sheet with 12.5 mm dia M.S tested rod hook with brass earthing stud & welded nut from inside and 2mm thick round M.S cover plate overlapping by 15 mm, including red oxide and two coats of white synthetic enamel paints and brass chromium plated screws and cup washers for fixing and all as per conceptional drawing enclosed & instruction of Engineer-in-charge (Sample box with cover to be got approved before fabrication including the fabricator)
27
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements