North Western Railway Tender

Chapter 5. Bridge Works. Misc. 5

Chapter 7. Turnout & Renewal 6

Chapter 8. Deep Screening & Ballast related activities 7

Chapter 9. Welding Activities 8

Chapter 12. Activities at Construction Site 9

Chapter 13. Maintenance Activities 10

Chapter 15. Heavy Track Machines 11

Chapter 16. Small Track Machines 12

Chapter 17. Handling of Material 13

Chapter 21. Miscellaneous Items

Chapter 4. Concrete Works 2

Chapter 5. Reinforced Cement Concrete 3

Chapter 15. Dismantling & Demolishing

Laying/Insertion of glued joint 60/52Kg rail under traffic block and running traffic 1 condition or otherwise at required location and in correct position duly fastened with PSC sleeper laid at correct spacing as per standard RDSO drawing including all ascent/descent crossing of drain/track and leading of glued joint and required fitting /fastenings within the station limit /from the nearest crossing stations with contractor's own labour and tools and plants.

Supplying and stacking of 65mm guage hard stone machine crushed ballast on cess to 2 the specification of track ballast issued by RDSO/LKO IRS-GE-1, JUNE 2016 Embodying all correction slips up to No. 4 Dated 06-06-2016 and revised CE circulars No.129 (amended up to date) as directed by site engineer as a complete job

"Shifting of existing Complete Turnout assembly from its present location by removing Existing switches, rails, crossings, check rails, sleepers and all fixtures complete by dismantling of existing track, laying of required length of new track & laying complete turn out assembly with switches, rails, crossings, check rails, sleepers and all fixtures complete by railways T-28 machine at proposed location up to 50 meters as per direction of Engineer In charge including removing ballast and muck by excavating up to required depth, preparation of formation bed, linking of track with all 3 fittings, filling up of ballast duly screened, packing, adjusting, opening & housing of switch, testing operation of switch assembly and attending track parameters, so as to make track fit for 20 kmph speed including disposing off muck to indicated places up to free lead after the block working etc. complete. 1:8.5 Note: (1) Rate includes making necessary preparation for T-28 machine movement like preparation of approaches, transportation and laying of wooden sleepers/blocks, etc., cutting of rails, if required with contractor's equipment, etc. (2) Dismantling of track shall be paid separately under relevant USSOR item. (3) Laying of new track shall be paid separately under relevant USSOR 2021 item.

"Shifting of existing Complete Turnout assembly from its present location by removing Existing switches, rails, crossings, check rails, sleepers and all fixtures complete by dismantling of existing track, laying of required length of new track & laying complete turn out assembly with switches, rails, crossings, check rails, sleepers and all fixtures complete by railways T-28 machine at proposed location up to 50 meters as per direction of Engineer In charge including removing ballast and muck by excavating up to required depth, preparation of formation bed, linking of track with all 4 fittings, filling up of ballast duly screened, packing, adjusting, opening & housing of switch, testing operation of switch assembly and attending track parameters, so as to make track fit for 20 kmph speed including disposing off muck to indicated places up to free lead after the block working etc. complete. 1:12 Note: (1) Rate includes making necessary preparation for T-28 machine movement like preparation of approaches, transportation and laying of wooden sleepers/blocks, etc., cutting of rails, if required with contractor's equipment, etc. (2) Dismantling of track shall be paid separately under relevant USSOR item. (3) Laying of new track shall be paid separately under relevant USSOR 2021 item.