North Western Railway Tender

Supply of Insulation sets for ground connection for made of nylon-66 for 220mm throw point machine as per Specn. No. IRS-S-40/84 or latest.one set consisting as follows: 1) Insulating Washer drg. No. S-8640-12 Nos, 2) Insulating Washer drg. No. S-8640/1 -04 Nos, 3) Insulating Washer 3 drg. No. S-8640/2 -02 Nos, 4) Insulating Bush drg. No. S-23199 -10 Nos, 5) Insulating Bush drg. No. S- 3463 -1 No, 6) Insulating Bush drg. No. S-22179 -02 Nos, 7) Insulating Bush drg. No. S-8912 -02 Nos, 8) Insulating Plate drg. No. S-3404 -02 Nos, 9) Insulating Bush drg. No. S-8813 -04 Nos, 10) Insulating Plate RH Drg. No. S-3592 -01 Nos, 11) Insulating Plate LH Drg. No. S-3593 -01 Nos.Inspection by Consignee.

Supply of insulation mat Rubber mate for electrical purpose 2.5 mm thick size 2m x 1 m suitable for 3.3 KV to 11 KV (Class-B) confirming to S15652-2006.Inspection:Consignee

Supply of Signal Conditioner Card SCC1 (02 Nos) & SCC2 (03 Nos) for HASSDAC as per RDSO Specification No. RDSO/SPN/177/2012 with version 3 or Latest. Make : CEL. Inspection by TPI/RITES.

Supply of DC-DC Conveter for HASSDAC as per RDSO Specification No. RDSO/SPN/177/2012 with Version 3 or Latest . Make : CEL Inspection by TPI/RITES.

Supply of Relay Drive Card for HASSDAC as per RDSO Specification No. RDSO/SPN/177/2012 with Version 3 or Latest. Make : CEL .Inspection by TPI/RITES.

Supply of Modem Card for HASSDAC as per RDSO Specification No. RDSO/SPN/177/2012 with Version 3 or Latest . Make : CEL. Inspection by TPI/RITES.

Supply of Tx Coil for HASSDAC asper RDSO Specification No. RDSO/SPN/177/2012 wuth Version 3 or Latest : CEL.Inspection by TPI/RITES.

Supply of Receiver Coil (Rx Coil) for HASSDAC as per RDSO Specification No. RDSO/SPN/177/2012 with Version 3 or Latest Make : CEL .Inspection by TPI/RITES.

Supply of Surge Voltage protection Device mounted on D in rail for HASSDAC as per RDSO Specification No. RDSO/SPN/177/2012 With Version 3 or Latest Make : CEL.Inspection by TPI/RITES.

Supply of Heat Gun similar to Bosch make Model No.- GHG 20-60 Professional (Part 12 No.- 06012A6400), Power input- 2000W with Nozzle similar to Bosch make part No.- 1609201797 and Welding Shoe similar to Bosch make part No.- 1609201798. One set consists of 01 no. of each item. Make- Bosch or Hitachi(Hikoki) only. Note- The Nozzle and Welding Shoe should be compatible to Heat Gun. Make:-BOSCH MODEL GHG 20@45<46@ Inspection by Consignee

Supply of Rechargeable Solar LED Flood Light 100W with 15000 mAh LiFePo4 Battery.Inspection by Consignee

Supply of Adjustable Tripod Stand for LED Flood Light, Stainless Steel Foldable LED Work Light Tripod Bracket as per TS.Inspection by Consignee

Supply of G.I. Boom as per RDSO Drg.S-11600 2nd Section for E.L.B. Confirming to RDSO Spec. No.RDSO/SPN/208/2012/Ver.2.0 suitable for Make Global Devices ACCEPTED MAKE/BRAND - GLOBAL DEVICES.Inspection by Consignee

Supply of TRACK DEVICE (AXLE COUNTER) AS PER RDSO SPEC. NO. RDSO/SPN/177/2012 VERSION 3.0 OR LATEST RX 21/25 KHZ SUITABLE FOR SSDAC OF GGTRONICS MAKE (15 mtr). MAKE/BRAND-GGT.Inspection by TPI/RITES.

Supply of TRACK DEVICE (AXLE COUNTER) AS PER RDSO SPEC.NO.RDSO/SPN/177/2012 VERSION 3.0 OR LATEST TX 21/25 KHZ SUITABLE FOR SSDAC/HASSDAC OF GGTRONICS MAKE. MAKE/BRAND-GGT.Inspection by TPI/RITES.

"Supply, Fabrication and Installation at workshop of Water roof Galvanized MAIN COVER ASSEMBLY complete spare for POINT Machine comprising of Main cover, CRANK HANDLE HOLE SUB. ASSY, KEY HOLE LOCK SUB. ASSY, DOOR LOCK, RUBBER GASKET of MAIN COVER ASSY, Rubber GASKET (C.H. HOLE LOCK ASSY.), CRANK HANDLE HOLE LOCK BASE, CRANK HANDLE HOLE LOCK LID, PIN (for C.H. HOLE LOCK S/A), RUBBER GASKET (C.H. HOLE LOCK ASSY. LOCKING CAM, KEY code 856051010-s along with Fixing material to trap accumulated air as per Drg no R-ST-12161, 18 modification in cover as per consignee requirement. It includes uplifting of existing termination box and rewiring of point machine with contractors' own material. Thickness of cover material: - 2mm, galvanized and power coated shall be done on cover. (Inspection Agency-Consignee) List of material to be provided in one set as following 1) I bolt M12 X 150 SS 304 - Qty 3 nos 2) Wing nut for the above - Qty 3 nos 3) Flat Washer 3 X 13 X 40 SS 304 - Qty 3 nos 4) Flat Washer 2 X 13 X 25 SS 304 - Qty 3 nos 5) Spring washer 2 X 143 X 20 SS 304 - Qty 3 nos 6) Heat Shrinkable Sleeve 6mm, 14mm, 15mm 7) Aldrob - Qty 1 no 8) Lock - Qty 1 no. 9) Body Wall Clamp - Qty 3 nos. 10) Wall clamp fitting nut set - Qty 8 nos. Inspection by Consignee."

Arrangement of Unskilled labour for miscellaneous S&T works.Inspection by : Consignee. 2

Arrangement of skilled labour for miscellaneous S&T works.Inspection by : Consignee.

Transportation of Railway material in 9MT Truck.unit shall be read as per kilometre. Inspection by Consignee.