North Western Railway Tender

Chapter 17 Handling of Materials 5

Chapter 19 Bridge Related Activities 6

Chapter 21 Miscellaneous Items

Chapter 5 Reinforced Cement Concrete 2

Chapter 10 Steel work 3

Chapter 12 Roofing 4

Chapter 13 Finishing 5

Chapter 16 Road work

Chapter 23 Rain water Harvesting & Tube wells

Casting, transporting and launching of precast reinforced concrete slabs in M-25 design mix for RCC boxes including launching during traffic block or without traffic block etc. as per approved drawings & design with contractor's own materials such as sand, water, 6mm to 20mm well graded 1 machine crushed stone aggregate, admixtures etc. including machine mixing of all gradients, placing, mechanical vibrating, curing etc. and providing shuttering, centering, formwork a n d handling, transporting to bridge sites including loading & unloading and launching including supplying , laying and levelling of required layer of sand underneath RCC slab as per approved drawing with contractor's own labour and equipments, all lead, lift, royalties, taxes etc. complete in all respect except cost of reinforcement & cement which will be paid separately under relevant USSOR items.

Removing of existing any type of track for insertion of RCC boxes, laying, linking & lifting of any type of track on newly laid RCC box on either side including cutting of rails,drilling of holes,subsequent through packing to make track fit for 75Kmph & destressing of LWR/CWR of any type of track and picking up of stone ballast (new or retrieved) including loading & leading of ballast from stacks Various activities in volved in this work along with their tentative scope are: (i) Removing ofexisting track - 39.0mtr (ii) Removing ballast from track & keeping it away from site of work. (iii) After insertionof RCC boxes, putting back existing ballast at (ii) above and supplying& putting in track additional quantity of ballast so as to provide minimum ballast cushion of 300mm to 350mm in 2 compacted condition. (iv) Relaying & linking of track - 39.0mtr (v) Lifting of track in stages of 50/75mm for required length to ensure ballast cushion of 300mm to 350mm as per site conditions minimum ballast supply 50.0cum on each LHS. (vi) Cutting of any type of rails - 4 to 8 nos. (vii) Drilling of 31.75mm/26.5mm or similar dia holes in rails of any section- 16 nos (viii) Subsequent through packings to make track fit for 75Kmph50.0mtr either side of LHS (ix) Local de-stressing of LWR/CWR 100.0m on either side of LHS. (x) AT welding of rail joints on any type of rail on single rail/SWP/LWR with Railway prefabricated moulds and railway portions as per IRS specifications T19-2012 ( amended up to date) •Qty. and scope of work shown above at S.No. (i) to (x) are tentative only. The scope of these items may vary as per site conditions & as per direction of Engineer-incharge for completing the work of LHS safely and successfully.The quoted rates are for complete job. Nothing extra shall be paid on any account.

Hiring of MPV(multi purpose vehicle) of loading capicity of minimum one MT double 3 Cabin having sitting capacity of 5 person (including driver) 4 wheel driver (4/4),4 stroke ,4 cylinder engine, factory built metal body cargo box size of approximate 1.4 m length & 1.4 m width, (including cost of operation & maintenance ) for running of 1200 Km in a month

Additional / Extra Km. Above 1200 Km. Of above NS item (including cost of operation & maintenance of the vehicle)