Nathdwara Temple Board Tender

LIGHTNING ARRESTERS & EARTHING WORKS SITC of Lightning Strike Recorder - 7 digits (Water proof) electro mechanical display to record the lightning current in an IP 67 enclosure with the minimum sensitivity of 1500A & maximum capacity of 220 KA (8/20 micro second waveform).

DISMANTLING WORKS Dismantling the existing cables of all types & size above 10 sq mm upto 50 sq.mm., cables must be neatly bundled, tied properly and mark them size wise and depositing the same with listing of material in store including testing of cables to use them wherever required if they are found healthy.

Dismantling the existing cables of all types & size above 50 sq mm.,cables must be neatly bundled, tied properly and mark them size wise and depositing the same with listing of material in store,including testing of cables to use them wherever required if they are found healthy.

Dismantling of existing fluorescent fittings of any type & size. (all LED, CFL, wall bracket lights, hanging lights) and depositing the same with listing of material in store.

Dismantling the existing ceiling fan/exhaust fan /cabin fan/ bracket fan complete with accessories, G.I. down rod,frame etc., depositing the same with listing of material in store and making the site clear

Dismantling the existing switchgear, DB,Fuse Boxes and Bus bar of any size complete with/without board or angle iron frame, depositing the same with listing of material in store and Making the site clear of dismantled DB and switch gears by refilling the holes with cement mortar & finishing in an approved manner.

Dismantling the existing energy meters located at various places of temple,meter boards/boxes,service cables and wires in coordination with AVVNL with all prior approvals/statuatory permissions, depositing the same with listing of material in store and Making the site clear of dismantled meters/boxes by refilling the holes with cement mortar & finishing in an approved manner.

Dismantling the existing Telephone / Lan /Wan / TV cables and wires of all sizes along with casing-capping / conduit complete

SAFETY ITEMS, T&P and FURNITURE Providing Safety & Personal Protective Equipment as per Indian Standards as following: Gum Boots

Safety helmets

Rubber Hand gloves 15 kV (Seamless)

Discharge Rod

Supplying and fixing of DANGER cum NO ADMISSION board made of mild steel at least 2mm thick & vitreous enameled white on both sides & with inscriptions in signal red colour on front side as reqd. Including the cost of all materials, labour as per standards

Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Hindi and duly laminated.

Providing First aid box conforming to IS 2217-1963.

Providing Testing Tools as per Indian Standards as following: Crimping Tool Hydraulic type with suitable Dies for crimping Lugs of size up to 400 sq.mm.

Earth resistance tester (20/200/2000 Ω) Digital

Tong tester Digital ( 1000A, 500V) with associated accessories

Neon tester

Providing T &P as following as per Indian Standards: Rechargeable LED Hand Torch

Hack saw frames + B185

Tool Box(Empty)

Double end spanner (6x7,8x9, 10x11,12x13,14x15,16x17,18x19, 20x22x,21x23,24x27, 25x28, 30x32)

Ring Spanners (6x7,8x9, 10x11,12x13,14x15,16x17, 18x19, 20x22x,21x23,24x27,25x28,30x32)

Insulated combination Plier(8")

Screw driver Set

Providing Furniture for control room: Table 600mmx 900mm- 1no., Chair- 4 no., File Rack/Almara 1no. (Godrej or equivalent ), Metal Rack for storage of safety items,tools etc. of best design and good quality material as per standards.

Redressing of existing electrical cables of all sizes, incuding all acceessories, hardware, re-laying of cables in propers sizes of conduits/trays (where they fixed directly on walls) and clamping as required in complete

CCTV SURVEILENCE Supply, Installation, Testing & Commissioning of 4 or 5 MP IR Outdoor PTZ Camera-1/1.8" Progressive Scan CMOS, 2560 × 1440 at 25fps, 5.9 mm to 188 mm, 32× Optical, 16x digital zoom, Colour: 0.005 Lux at F1.5, B/W: 0.001Lux at F1.5, ICR, ONVIF, support H.265,MJPEG, 120 dB WDR, 3D Digital Noise Reduction, HLC, BLC, Defog, EIS,Triple individually configurable stream, 24 VAC & PoE/HPoE, IR range:200m, Pan: 360° endless, Tilt: From -15° to 90° (auto-flip), Pan Speed - from 0.1°/s to 160°/s, Pre-set Speed: 240°/s, Tilt Speedfrom 0.1°/s to 120°/s, present Speed: 200°/s, Pre-sets- 300, Alarm Input-2-ch alarm input, Alarm Output-1-ch alarm output, Audio-1 channel input & output, Support on-board storage up to 256 GB (SD card not included), IP66/IK10 Vandal Proof, Line crossing detection, intrusion detection, CE, FCC, BIS certified.

Supply, Installation, Testing & Commissioning of 4 or 5 MP IR Fixed Dome Network Camera -1/2.7 inch Progressive Scan CMOS, 2592 × 1944 at 25fps, 2.8 mm Fixed lens, 0.003 Lux at F1.4, 0 Lux with IR on, ICR, ONVIF (PROFILE S, PROFILE G, PROFILE T), support H.265, H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction,BLC, HLC, Three individually configurable stream, 12 VDC & PoE,IR range: 40m, Support on-board storage up to 256 GB (SD card not included), IP67, IK10, Edge Analytics- Line crossing detection, Intrusion detection, Motion detection, Region entrance detection, Region exiting detection, Scene change detection, Face capture, Video tampering, audio exception detection, False alarm reduction through human and vehicle target classification based on deep learning CE, FCC, BIS certified

Supply, Installation, Testing & Commissioning of 4 or 5 MP IR Fixed Bullet Network Camera -1/2.7 inch Progressive Scan CMOS, 2592 × 1944 at 25fps, 2.8 mm Fixed lens, 0.003 Lux at F1.4, 0 Lux with IR on, ICR, ONVIF (PROFILE S, PROFILE G, PROFILE T), support H.265, H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction, BLC, HLC, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage up to 256 GB (SD card not included), IP67, Alarm 1 inputs, 1 outputs, Audio 1 inputs, 1 outputs, Edge Analytics- Line crossing detection, Intrusion detection, Motion detection, Region entrance detection, Region exiting detection, Scene change detection, Face capture, Video tampering, audio exception detection, False alarm reduction through human and vehicle target classification based on deep learning CE, FCC, BIS certified

4MP IP varifocal MFZ bullet camera IP67 Outdoor WDR IR rugged : Supply, installation testing and commissioning of Outdoor WDR IR rugged IP bullet cameras shall be quipped with : 1/2.7" 2 MP progressive CMOS imager to capture 1080p resolution at 25/30 fps or 4/5 MP at 20 fps images, 1: 2.7-12 mm, MFZ, F1.4, H.264 and MJPEG codec, triple stream support, 60 m (150’) IR distance, depending on scene reflectance, waterproof (IP67) and IK10 vandal resistant camera housing, ONVIF profile S and G compliant,, built-in PoE (Power over Ethernet) eliminates, separate power supply and associated wiring, 24 V AC/12 V DC inputs where PoE power is unavailable, Supports up to 128 GB micro SDHC (class 10) card for local video storage when network is interrupted. Card not included, True WDR: up to 140 dB

SITC of VMS & Storage Server: VMS with minimum support for 250 cameras, 10 Storage Managers, Rack Mounted direct ISCSI based Storage Device with latest edition of Windows Server with original Microsoft Licence Key and DVD R/W. The device shall be RAID- 5/6 Protected for Recording . Server should come with a highly scalable enterprise level Video Management Software that analyse record and trigger all type of intelligent analytical and behavioral trigger alarm. Integrated VMS should also have watchdog facility for monitoring healthiness of system .The Integrated VMS software should have 5 Client Licenses for Viewing captured/ Recorded Video via client station /Mobile and should have seamless integration with different systems like third party security infrastructure, Fire fighting alarm,PA System etc. as required with further Licenses. The server(s) should support feed from min. 250 cameras. It should support all type of cameras analytics for forensic search and analysis. It shall be designed for High speed , high cappacity digital video storage and high perfomance palyback applications. The digital video storge array(3 no.) The storage shall support SAS, SSD and SATA based disks simultaneously, shall have inbuilt Storage of min. 48 TB HDD, 7200 rpm SATA HDD hot swappable (which can be future expendable up to 256 TB with two (2) redundant power supplies.It should support multilevel storage (live recording on primary disk, archiving on secondary, and so on). The system shall have minimum 16 GB DDR4 RAM ,and per channel min 3-4M bits per seconds band width .Server Should have latest high performance Processor with suitable system memory for lag free operation of system. The storage array should have suitable graphic card and sound card of 5.1 Channel 24bit. The Storage array shall provide an audible alarm to notify the user in the event of different failures/full storage /event trigger. The system should be such that the video recording form camera should be done directly on storage array without the use of Network manager so if network manager server fails than also recording should not be effected . Server should be ONVIF Profiles S&G, CEand UL Certified.(Approved Make , Axis, Bosch, Avigilon) including all accessories, civil, electrical works & peripheral items, as required as per specifications and at site of work as directed by Engineer in Charge.

SITC of Intelligent Ethernet POE Switches providing 24 x 10/100/1000 Fast Ethernet POE ports- 370W or better and 4 dual purpose uplink (provision for Copper / Fibre Giga connectivity) with LAN based Software. The LAN based S/W supports enhanced integrated security, including Network Admission Control (NAC), advanced quality of service (QoS), availability and scalable management to enable new converged applications

SITC of Workstation with client license, Latest generation x86 Intel/AMD Processor,6 Cores or higher,4.4GHz, 8 TB HDD, 16 GB DDR 4 SDRAM, One no. of dual Port 4 GB NVIDIA Quadro Graphic Card or dual Port 4 GB AMD Radeon Pro WX Graphic Card or similar with Full HD and 4K UHD resolution display support, min.2 No. slots for each SSD&SATA hard drives,DVD R/W Drive, 4 no.USB Ports, PC with 32" TFT monitor, key board & mouse including OS(Windows 10/Linux) & all basic software,firewall, and Suitable Graphic cards, network switch etc. Chasis must be industrial grade only.

SITC of LED vedio wall , size 4*8 feet ,pixel pitch p 2.5 mm Packing Technology SMD 2121 Module Resolution 1280 x 764 or more, Module Dimension (mm*mm) 320 x 160, Receiving Card MRV512 ,Power Supply Input: AC 200-240 Output:DC 5V 60A, LED Processor novastar for muilty window, Operating memory 1 GB, Internal storage space 8 GB Packing ,LED multimedia player x 1 Switched-mode. Cabinet material should be Aluminium Die cast including the structure ,cable&connector,switchers etc. complete as reqd. (including necessary video wall controllers and video wall management software, video wall processor based on IP network which should support RS232/IR TCP/IP and Relay control, should have onboard modular programming architecture with 2GB on-board RAM and 2GB flash memory, shall be designed for redundancy, software shall have key features like Central configuration database, Browser based user interface, Auto-detection of network sources, Online configuration of sources, displays and system variables, should support multiple clients/consoles, shall be suitable to control from remote PC through LAN without the use of KVM hardware, having min. 2 layer authentication, soft KVM, provision for two seperate tickers, should support display of Alarms, All features and functionality should be certified by the OEM, The Display Modules, Display Controller & Software should be from a single OEM.

SITC of Surge protectors as required for Power & Signal protection as per IEC standards

SITC of PTZ Contollrer with accessoroies: Supply, Installation, Testing & Commissioning of ONVIF, IP based 4d PTZ control Joystick complete with all required specification and supporting accessories.

PUBLIC ADDRESS SYSTEM Supplying, installation, testing & commissioning of 6 zone, IP based digital PA/VA controller with LCD Screen, Built in USB, MP3,FM/AM functions, (including 6 zone button paging station, IP based Networkable touch screen) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.

Supply, installation, testing and commissioning of 40W wall mount with max SPL1M/1W 86dB. Frequency response of 100Hz-20KHz with a dispersion angle of 160 deg. The speaker should have tapings at 40W/20W/10W (with require mounting arrangement)

Supply, installation, testing and commissioning of 30W horn speaker (IP66-ABS) with max SPL1M/1W 104dB. Frequency response of 300Hz-10KHz. The speaker should have tapings at 30/15W.(with require mounting arrangement)

Supplying, installation, testing & commissioning of 25 W RMS,100V line with power taps of 25/15/10/5W SPL at 1kHZ (1W/1m)-94dB,

Supplying, installation, testing & commissioning of 1000W Class-D Amplifier complete with all accessories,Bass: ±10dB at 100Hz, Preamp 200mV/600Q, Line 1V/1kO, Treble: ±10dB at 10kHz, 7 Mic & 2 Aux Inputs.

Supplying, installation, testing & commissioning of exit point directional sound speaker with voice and integral audio amplifier with selectable sound pulse patterns complete as required

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. speaker cable Single pair, 2-core, 1.5 sqmm Metre

speaker cable Two pair, 2-core, 1.5 sqmm Metre

speaker cable Four pair, 2-core, 1.5 sqmm Metre

Providing, fixing, installation, testing and commissioning of 1 x 2000 ltr capacity overhead water storage tank (Sintex Make) of three layer with suitable thickness as per latest IS amendment and fitted with inlet and outlet valve of existing pipe line and drain valve for overflow system with CC foundation/platform arrangement. Complete testing and commissioning etc. as reqd.

Supply & Fixing ISI marked ( IS : 15683 ) Poratable Fire Exitnguisher,Trolley mounted Mech. Foam type capacity 50 ltrs with gun‐metal cap and nozzle and complete respects in all respects including initial fill and wall suspension.

Supplying and Fixing of fire bucket stand made out of MS angle with one coat of primer and two coat of enamel paint of approved shade including platform and associated civil works each stand should have four nos fire buckets of 24 gauge galvanized steel sheet, standard 9 litre capacity and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letters "Fire" in black and gold as per IS 2546-1974 at approved location as per direction of Engineer incharge complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

FAÇADE LIGHTING SITC of 40 W, Integral Surface Mounted Device (SMD), IP 66, Linear Wall washer luminaire with System Lumen Output Minimum 1700Lumen. LED Linear Wall washer shall be made up of Extruded Aluminum Housing and Frame, for better heat decapitation. Fixtures should have toughended glass with 30° Beam. The luminaire shall have IP66 protection. The LED shall be compliant with Useful L70 life of 50000 Hrs. The LEDs used should be with RGB .LED Driver shall be Isolated type, Constant Voltage topology driver in metal enclosure with IP 67 Protection. Driver efficiency should be 86% & proper heat sink for heat dissipation suitable to operate in input voltage range of 150V to 270V (nominal rated voltage – 240V) with 3 KV internal surge protection. LED driver shall have output short circuit & over voltage protection inbuilt. Luminare shall have 3 channel main 360 W DMX controller to programme the RGB wall Washer to provide different colors as per requiremnt.

Supply, installation, testing & commissioning of LED RGB Flexible light strip 5 mtr long (1 Roll) with 7.2 Watt per meter, complete with all accessories,which can be compatible with the DMX 512 controller. LED Strip should have min.30Nos LEDs per meter through out the length with the silicon cover.The Strip should have IP 67 protection. The Nominal Voltage should be DC24V, working temperatrure range should be between -20 deg C to +50 deg C. The appropriate quantity of amplifier, power supply with all the neccessary cables required for the proper working of strip are included. Work should be completed with necessary factory made weather proof cable, lenses, and external power and data supply [if any], wiring, junction boxes, provisioning of power and data cabling etc. as required. Suitable fixing arrangement , Foundation as required complete in all respect as per direction of Engineer in Charge, warranty: 5 years, Electrical safety class: class 1, (Supply of suitable power cable,wires, electrical accessories etc. for termination and wiring shall be provided by the contractor) Make of fitting- Havells, Philips, Bajaj

SITC of 3 channel 24/48V DC Input, max 300W DMX Controller for RGB Color chaning fixture.IT should have capability to control with remotes upto 5 m radius. It should Have capability of Syncronious Color conversion program upto 15 different varients of colors.It Can control conversion of speed and brightness of color thorugh remote controls.It should be complient of connection of 4C Cable (V+RGB) or 5C Cable (V+V-RGB). System can be expanded signal of input and output through RJ45 cable.it has DIP switch to set the IP address for DMX 512. It should have controller with individual IP adresses. 3CH RGB controller Has: ① Remote control receiver ② DIP switch ③ Power input ④ Signal input confirmation lamp ⑤ DMX signal input ⑥ DMX signal output ⑦ Power supply for LED light + signal output ⑧ Signal output for expansion

SITC of IP67 ,100W , 24V Led Driver for Arcus Range fittings with Industrail Plastic Material

SITC of IP67 Plug-socket connector(one pair) S Connector for 4Cx0.75mm2

SITC of IP67 Plug-socket connector(one pair) T Connector for 4Cx0.75mm2

Supply, installation, testing & commissioning of exterior rated LED RGBW Wall grazing light luminaires with dedicated optics for architectural lighting complete with all accessories. Luminaire has a choice of architectural floodlighting optics with beam angles of 25°/40°/60°/80°/30X65°. Wattage not exceeding 10-15W,with system lumen output of minimum 650 lumen with all LED ON and operating voltage of 24 V DC. Fixture should have aluminium alloy body, powder-coated finish of RAL7040 with Clear tempered glass lens and should have 12 no. of LED,s. Luminaire lifetime of 70,000 hours at 50 degree Centigrade @L70 and IP 66 & IK7 protection against weather. Fixture should have Height 81 mm±1% including surface mount base width 43 mm±1% , length 500 mm ±1% with constant locking hinges for simple position control from various angles without special tools. The light fixture should be programmable using 8 bit control DMX512 protocol with Operating Temperature Range from -35°C to 50°C. The appropriate quantity of amplifier, power supply with all the neccessary cables and other accessories if required for proper working of luminiaries are included. Work should be completed with necessary factory made weather proof cable, lenses, and external power and data supply [if any], wiring, junction boxes, provisioning of power and data cabling etc. as required. Suitable fixing arrangement , Foundation as required complete in all respect as per direction of Engineer in Charge, warranty : 5 years, Electrical safety class: class 1, (Supply of suitable power cable,wires, electrical accessories etc. for termination and wiring shall be provided by the contractor) Make of fitting - Havells, Philips,Bajaj

PBX Supply, Installation, testing & commissioning of (IP PBX ) Exchange equipment consist, no. of extension, no of junction, no. of expandable eport, operating console, current on max. load with ISDN compatible of approved make and labor, dressing of the telephone cable in the MDFs including all programming function, supply of required patch cords/cables/jumpers in suitable size, interconnection between exchange, exchange MDFs/patch panel including line checking/testing & establish connection of all telephone instruments for the extension at different locations of the Temple premises as directed by NTB’s Engineer in charge/Consulatnt as required as per specifications IP PBX Servers with support for 64 IP Extensions including necessary SIP licenses, (Main & Hot Stand by Server with Active-Active Redundant Mode) along with all accessories and spares as required to complete the job as per specifications

Executive IP Phones

Basic IP Phones

Analog Caller ID Telephone

SITC of 100 Pair Main Distribution Frame (MDF) with genuine Krone LSA-Plus technology Module & Frame & UTP CABLE & 100 Pair Intermediate Distribution Frame(IDF) with genuine Krone LSA-Plus technology Module & Frame & Jumper Wire along with all accessories and spares as required to complete the job as per specifications

SITC of Modules(10-Pair) Based on genuine Krone LSA-Plus technology, Fits on all back mount frames, Over voltage & Over current protection, Robust long term environmental stability, Flexible Indoor & Outdoor Use along with all accessories and spares as required to complete the job as per specifications

LAN Connectivity TYPE-3 (DISTRIBUTION SWITCH) SITC of Layer 3 fiber aggregation networking switch, minimum 24 # SFP ports, plus minimum 4 # SFP+ ports, 1 AC power supply built in and inclusive of at least 1 redundant power supply and redundant fans.

TYPE-2 (ACCESS SWITCH) SITC of Layer 2 manageable networking switch, 24 # 10/100/1000Tx ports, stacking, all ports capable of providing PoE+ as per 802.3at, switch having a PoE power budget of minimum 350 Watts, minimum 4 dedicated or shared SFP port

SITC of wireless controller capable of supporting min.25 access points, inclusive of licence costs for 25 Access Points. Centralized Hardware Controller based architecture. The system shall operate in High Availability (HA) mode providing redundancy for controller hardware.

SITC of Wireless Access Point supporting Dual band with 802.11ac (5 GHz) and 802.11g/n (2.4GHz) concurrent operation, 4 x 4:3 MIMO Wave2 from Day 1, One 10/100/1000 Base-Tx auto-sensing (RJ45) PoE port. The AP shall be wall mountable as well as ceiling mountable (provide both options).

SITC of Network Management System & security software