Mohanlal Sukhadia University Tender

Demolishing cement concrete including disposal of material within 50 mtr lead 1:4:8 or leaner mix

Dismantling dressed stone work. marble work, ashlar face stone work or pre cast concrete work including stacking serviceable material and disposal of unserviceable material within 50 mtr lead In cement mortar

Dismantling wooden boards in lining of walls and partition excluding supporting members but including stacking within 50 mtr lead Up to 10mm thick

Dismantling aluminium/Gypsum partition, doors,windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material within 50 mtr lead as directon by Engineer in charge

Dismantling door, windows and clearstory windows steel or wood shutter incl. Chowkhats and hold fast etc.complete and stacking within 50 mtr. lead of area exceeding 3 Sqm.

Dismantling stone rubble masonry including stacking of serviceable material and disposal of unserviceable material within 50 meter lead in cement mortar.

Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish: 25 mm

6mm cement plaster to ceiling of mix 1:3 (1 cement:3 fine sand)

P/F Ist quality standard White, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles of ISI marked (IS:13753) of size 300mmx450mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls & pillar)

Add extra for using coloured dark shade tiles instead of white /ivory /light grey/ light green/sky blue /light brown and other ligh shade colours

P/F Ist quality MAT finished ceramic tiles 300x300mm confirming to IS:13753 colour such as white, grey, ivory fume red brown, in walls, floors, steps, pillars etc. laid on a bed on neat cement slurry including nicely finished joints using waterproof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4)

Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure'A' Decorative teak veneer both side 30 mm thick

Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade one or more coats on new work.

Painting with enamel paint of approved brand and manufacture to give an even shade one or more coats on old work.

Applying Birla/JK white cement based putty over cement plaster surface for making even surface.

Grinding and polishing on mosaic/polished stone flooring Old Surface.

Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm, long embedded in cement concrete block 15x10x10cm of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with coper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer excluding the cost of metal beading and other fitting except necessary hings of pivots steel handles peg stay etc. as required Windows fixed

Providing and fixing at all height all false ceiling of 12.5mm thick tapered edge Gypsum board conforming to IS 2095 part I including providing and fixing of frames work made of special section power pressed from M.S. sheet and galvanized in accordance with zinc coating 600 as per IS: 277 and consisting of angle cleats of thick 25mm wide x 16mm thick with flanges of 22mm and 37mm at 1200 mm center to center one flanges fixed to the ceiling with desh faster 12.5mm dia x 40mm long with 6mm dia bolts to the hangers of 25x25x0.5mm of required length, and other end of angle hanger being fixed with nut anf bolts to G.I. channels 45mm x 15mm x 0.9mm running at the rate of 1200mm center to center to which the ceiling section 0.5mm thick bottom wedge of 80mm With tapered flanges of 26mm each having clips of 10.5mm at 450 center to center shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64 mm dia x 230mm, long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of cealing fixed to wall/partition with the help of rawl plugs at 450mm center to center with 25mm long drive all screws also including the cost of making opening for right fittings, grills, diffuesers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specifications and direction of the Engineer incharge but the excluding the cost of painting.

Structural steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5 mtr height

Pointing on stone slab ceiling with cement mortar 1:3 ( 1 cement : 3 sand) Raised pointing

Random rubble stone masonry for superstructure above plinth level one storey height in cement mortar 1:6 (1 cement: 6 sand) for above 30 cm. thick walls.

Half brick masonry in Cement mortar 1:6 superstructure upto third storey including cost of nominal hoopreinforcement ( 2 Nos. 6mm dia M.S. bar at every forth course)

P/F Ist quality Vitrified Porcelain Polished tiles on floor skirting and steps etc. in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and confirming to IS:15622 of approved make in all colour and shade, laid with 20mm thick C.M. 1:4 including grouting the joints white cement and matching pigment etc. complete size 600mmx600mm

Polished Blue Kota stone flooring skirting laid over 20mm thick base of CM 1:4 and jointed with gray cement slurry to match the shade of the slab including rubbing and polishing complete For area of each slab From 2001Sq.cm to 5000 sq.cm 25 mm thick slab

P/F Granite stone slabs thickness 16-18 mm mirror polished and machine cut in walls, steps, pillars counters, Jambs, shelves, sills etc laid on 12 mm (AV) thick base of cement mortar 1:3 ( 1 cement:3 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab complete including grinding rubbing and polishing complete Green/ Black/Other granite above 3601 cm2 slabs.

Providing & fixing anodized aluminium work (anodizing to be got done from approved anodizer) for doors, windows, ventilators and partition with extruded built up standard tubular and other sections of approved make confirming to IS : 733 & IS: 1285 anodized transperent 81 dyed to required shade according to IS:1868 (Minimum anodic coating grade AC 15), fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gap at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing/paneling, C.P. brass/Stainless steel screws, Al. Tower bolt & Al handle & Al drop etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately).For fixed portions.

….do…. for shutters of Sliding windows and ventilators including providing & fixing hinges/rollers etc. and making provision for fixing of fittings wherever required (lockers shall be paid for separately.).

….do…. for shutters of openable doors, windows and ventilators including providing & fixing hinges/rollers etc. and making provision for fixing of fittings wherever required (lockers shall be paid for separately.).

Providing and fixing 12mm thick prelaminated three layer medium density (exterior grade) particle board Grade I, Type II conforming to IS:12823 bonded formaldehyde synthetic resin of approved brand and manufacture in paneling fixed in alluminium doors, windows, shutters and partition frames with C.P., brass/ stainless steel screws etc.

Renewing glass panes, with putty and nails wherever necessary : 4 mm thick plain glass panes

P & F WVC wash basin (Ist quality, I.S.: 2556 Mark) of approved make with C.I. brackets duly painted 1 No 15 mm C.P. pillar cock (I.S. : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall Size 580 x 450 mm

P & F Ist quality WVC pedestal for wash basin

P & F Looking Mirrors with P.V.C. frame of approved (Atul Modi Guard Saint Gobin or equivalent) Oval shape 450 x 350 mm

Labour charges for removing WVC W.C. pan Indian/Orrisa pan

P & F European type white glazed vitreous china Ist quality W.C. pan (I.S: 2556 Mark) with P or S trap including cutting and making good the wall and floor.

P & F water closet Seat Covers with brass hinges complete: Non-breakable of other approved make White

P & F jet spray for water closet with C.P. Copper tube flange of approved make

P & F Low level Flushing Cistern of 10 litres capacith (IS : 2556 mark), of approve make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS : 1703 mark) complete including cutting and making good the wall: WVC with C.P. brass bend

P & F GI pipes ( Internal works ) with GI fittings excluding Union (IS:1239 mark) and MS clamps, including cutting and making good the wall and floors 25mm dia Nominal Bore 'B' Class

P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: Long body, 15mm nominal bore weight not less than 690 gm

P & F 15 mm. Dia Connection Pipe of approved quality/make : CP Brass Pipe with CP Brass nuts length 600mm.

Construction of cement concrete chamber 125 mm dia Stainless steel sheet grating

Providing and fixing C.P. flange for 15 mm dia taps