Mohanlal Sukhadia University Tender

Providing and fixing of precast concrete interlocking block of M 30 grade manufactured from fully computerised automatic stationery hydraulic vibropressed machine and fully computerised automatic batching plant of class A1/A2 as per BS 6717:2001 with rubber mould technology including painting with lacker polising. The CC interlocking paving blocks be laid on average 50 mm. thick bed of coarse sand and the joint on is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead, Lifts and taxes General specification of blocks:1) Shape as defined by Engineer incharge 2) Tensile splitting strength and braking load as per BS 6717:2001 3) Color : Grey cement natural colour. 4) Variation in dimension : Less than 1.6 mm.5)Variation in thickness : Less than 3.2 mm. 6)Abrasion : As per BS : 6717:2001 80mm thick interlocking blocks

Add Extra for Red color Paver block

S & FCC 1:2:4 (M-15) Precast kerb on dand upto 60 cm length over 20mm thick base of cement mortar 1:6 including jointing, earthwork, painiting and jointing with cement mortar 1:4 of size.( 20 + 25) /2 x 30cm

Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc. in layers not exceeding 20 cm in depth consolidation each deposited layer by ramming and watering including lead up to 50 mtr and with all lift.

Carriage of earth including loading,unloadiing etc lead up to 1 km

Excavation for road way in soil by mechanical means including cutting and pushing the earth to site of embankment upto distance of 100 mtr. Including trimming bottom and side slope in accordance with requirement of lines, grades and corss-sections.

P & F plain fiber glass sheet ( FRP sheet fiber reinforcement product sheet conforming to IS: 12866-1989 having minimum thickness as below including fixing with nuts, bolts hooks and bitumen washer etc. complete:3.0 mm thick (Wt. 5.0 kg/mtr.sq)

Steel work in built up tubular trusses including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete above plinth level upto 4.5 mtr height.Hot finished welded type tubes.

Providing corrugated G.I. sheet roofing fixed with G.I. J or L hooks bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coat of approved paint on over lapping of sheet complete (upto a pitch of 60 degree) & excluding the cost of purlins rafters and truses, for class of sheets. 1.60mm thick

Random rubble stone masonary for foundation and plinth in cement sand mortar above 30 cm thick wall in:Cement mortar 1:6 ( 1 Cement : 6 Sand )

Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish:25mm thick

Dismantling stone rubble masonry including stacking of serviceable material and disposal of unserviceable material within 50 mtr lead.In cement mortar

Dismantling tile work in floor and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 mtr lead For thickness of tiles 25mm to 40mm

P/F Ist quality Vitrified Porcelain Polished tiles on floor skirting and steps etc. in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and confirming to IS:15622 of approved make in all colour and shade, laid with 20mm thick C.M. 1:4 including grouting the joints white cement and matching pigment etc. complete size 600mmx600mm

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work including prepration of base with primer putty lippy complete in all respect.

Brick masonary in super structure up to third storeywith bricks of class designation 75 in Cement mortar 1:6 ( 1 cement : 6 coarse sand )

Providing and layiny in position specified grade of cement concrete for RCC Structure elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement ; 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15° , landings, balconies , shelves ,chajjas, lintels, bands ,plain window, sills ,staircases and spiral staircases M25 grade Design mix (with weight batching plant only)

Centering & shuttering with steel plates including strutting , propping, barcing both ways with wooden members and removal of form work up to floor three level for:Suspended floors, roofs, landings staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blockes sills, chhajjas, lintel, beams etc.

Providing and fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position in binding (including cost of binding wire ) all complete up to floor three level Thermo mechanically treated bars (conforming to relevant IS:1786.)