Mohanlal Sukhadia University Tender

…do…Hard Rock

Providing and laying in position cement concrete including curing compaction etc . Complete in specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate 1:5:10 ( 1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforcement cement concrete all RCC structural elements upto plinth level including curing compaction finishing with rendering in cement sand mortar 1:3 ( 1 cement : 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement M20 Grade nominal mix (with graded stone aggregate 20mm nominal size)

Providing and layiny in position specified grade of cement concrete for RCC Structure elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement ; 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15° , landings, balconies , shelves ,chajjas, lintels, bands ,plain window, sills ,staircases and spiral staircases M25 grade Design mix

Providing and layiny in position specified grade of cement concrete for RCC Structure elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement ; 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for Walls (any thickness) including attached pilasters buttresses, plinth and string courses fillets columns pillars pears abutments posts struts etc M25 grade Design mix

Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formworks for foundation in basements, rafts footings, straps beams, bases of columns etc. up to plinth level.

Centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways with wooden members and removal of formwork for upto floor three level for suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, copings, bed plates anchor blocks, sills, chajjas, lintel beam etc.

Centering & shuttering with ply wood or steel sheets including strutting , propping, barcing both ways with wooden members and removal of form work up to floor three level for:Grid roofing with panel area less than 2.5 Sqm (contact area (Plan Area) to be measured)

Centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways with wooden members and removal of formwork for upto floor three level columns, pillars, posts and struts etc.

Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending placing in position and binding (including cost of binding wire) all complete up to floor three level Thermo mechanically treated bars (confirming to relevant IS:1786)

Random rubble stone masonry for foundation and plinth in cement sand mortar 1:6 for above 30 cm. thick walls.

Providing and laying damp-proof course with cement concrete grade M-150 (1:2:4) mortar prepared with 1 % solution of water-proof compound, including two coats of hot blown bitumen ( 2 Kg. per sqm) complete as per specification with glass strip 3 mm thick at a distance of 1 m interval: 75 mm thick

R.R. dry stone kharanja under floor.

Random Rubble stone masonary for superstructure above plinth level one storey height above 30 cm. thick walls in : Cement mortar 1:6 ( 1 Cement : 6 Sand )

Brick Masonry in superstructure upto third storey with bricks of class designation 75 in C.M. 1:6 (1 Cement: 6 coarse sand)

Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish: 25 mm

Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish: 20mm

Providing and fixing Ist quality standard White/ ivory,grey, fuma red brown, light green, light blue and other light shades Glazed Tiles of (confirming to IS : 13753 & IS 13622) of size 300 mm x 200 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (Fxcluding the cost of cement plaster on walls & pillars ).

P/F Ist quality Vitrified Porcelain Polished tiles on floor skirting and steps etc. in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and confirming to IS:15622 of approved make in all colour and shade, laid with 20mm thick C.M. 1:4 including grouting the joints white cement and matching pigment etc. complete size 600mmx600mm

P/F Ist quality MAT finished ceramic tiles 400x400mm confirming to IS:13755 colour such as white, grey, ivory fume red brown, light blue and other light shades in floors, steps, pillars etc. laid on a bed on neat cement slurry including nicely finished joints using waterproof joint filler powder (Unitile or Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4)

6mm cement plaster to ceiling of mix 1:3 (1 cement:3 fine sand)

Providing brick kharnja in cement mortar 1:4 in square pattern over roof of ground floor 75 mm to 100 mm thick average.

Providing gola (batta) 75mm x 75mm in cement concrete (1:2:4) including finishing with cement mortar 1:3 as per standard designs.

Finishing with 25mm thick cement plaster on roofs in cement sand mortar 1:4 mix including water proofing compound @ 2% of cement used, with neat cement finished curing etc. complete in all respect including making of 300mm x 300mm square.

Applying Birla /JK white cement based putty over cement plaster surface for making even surface

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade two or more coats on new work including preparation of base with primer, putty, lippy complete in all respect.

Painting with enamel paint of approved brand and manufacture to give an even shade one or more coats on new work.

P/F stone slabs table rubbed 16 to 18 mm thick in walls, steps, pillars counters, Jambs, shelves, sills etc laid on 12 mm (AV) thick base of cement mortar 1:3 ( 1 cement:3 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab complete including grinding rubbing and polishing complete Raj nagar 2nd quality with light spots and streaks above 3601 cm2 slabs.

Carriage of earth including loading, unloading etc. lead upto 1 Km.

Supplying & fixing door, window, chowkhats and frames, including antitermite treatment M.S.flat , hold fasts of size 250x40x3 mm fixed with M.S. bolt 5 mm dia 50 mm long duly embedded in cement concrete M-15 grade M.P. Teak Wood Grade-1

Providing and fixing fully panelled double leaf shutter for windows and ventilators as per approved design and drawings with approved steel fittings as per Annexure -'A' and width of styles, bottom & top rails o 75 mm including bending of 25 mm x15mm size on both faces. M.P. Teak Wood Gr-I

Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure'A' 30 mm thick Decorative teak veneer both side

Polished on wood work with ready made wax polish of approved brand and manufacture New work

Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm, long embedded in cement concrete block 15x10x10cm of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with coper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer excluding the cost of metal beading and other fitting except necessary hings of pivots steel handles peg stay etc. as required Windows side hung (openable)

P/F square bars or other flat welded to window ventilators etc.

S/F fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3 mm with suitable screw at not exceeding 150 mm distance.

Providing and fixing at all height all false ceiling of 12.5mm thick tapered edge Gypsum board conforming to IS 2095 part I including providing and fixing of frames work made of special section power pressed from M.S. sheet and galvanized in accordance with zinc coating 600 as per IS: 277 and consisting of angle cleats of thick 25mm wide x 16mm thick with flanges of 22mm and 37mm at 1200 mm center to center one flanges fixed to the ceiling with desh faster 12.5mm dia x 40mm long with 6mm dia bolts to the hangers of 25x25x0.5mm of required length, and other end of angle hanger being fixed with nut anf bolts to G.I. channels 45mm x 15mm x 0.9mm running at the rate of 1200mm center to center to which the ceiling section 0.5mm thick bottom wedge of 80mm With tapered flanges of 26mm each having clips of 10.5mm at 450 center to center shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64 mm dia x 230mm, long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of cealing fixed to wall/partition with the help of rawl plugs at 450mm center to center with 25mm long drive all screws also including the cost of making opening for right fittings, grills, diffuesers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specifications and direction of the Engineer incharge but the excluding the cost of painting.

Ariash plaster ( 1lime putty:2 Jhingra) over lime plaster or plain back ground. Note:- For all items as per site requirement. (i)Quantities of the items may be increase or decrese. (ii) Any item may be deleted. (iii) Any extra item required to complete the work is to be carried out.