Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Special Repair To Unsv Rolling Shutters Of Bldg No P-129, P-114, P-116, P-117, P-120 And P-126 Of Ad Msl Regt At Mil Stn Bikaner Under Ge (n) Bikaner in Bikaner, Rajasthan, with an estimated contract value of Rs. 83,84,000. The bid opening date for this tender is 23-10-2026 and the last date for bid submission is 20-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - Rajasthan Tender

Opening Date23 Oct 2026
Closing Soon20 Nov 2026
Tender Amount₹ 83,84,000 
Notes
Download

Costs

Description

Special Repair To Unsv Rolling Shutters Of Bldg No P-129, P-114, P-116, P-117, P-120 And P-126 Of Ad Msl Regt At Mil Stn Bikaner Under Ge (n) Bikaner

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Supply and fixing steel rolling shutters, curtains built-up of interlocking lath sections formed from cold rolled steel strips thickness 1.25mm, including lock plates, handle etc height upto 5 metre Modification/cutting in curtains as a perforation opening for heavy wind pressure in alternate curtains size as length 30cm x height 5cm for heavy wind pressure in every 3rd curtain in full length and 1.00mtr c/c, in each shutter complete all as specified and directed.

200

108

-

... More
Fixing only old good conditions curtains to existing unserviceable shutters height upto 5 metre complete all as specified and directed.

100

104

-

... More
S&F Gear box with accessories including rotating shaft dia 250mm with rotating pipe shafts dia of gear 250mm, with 4 Nos of Flat Iron 40x5mm longitudinal, circular Flat Iron 25x5mm sizes 0.30 metre spacing, welding to main pipe 50mm shaft MS pipe, vertical pipe 25mm bore connect to gear box complete all as specified and directed.

24

108

-

... More
Taking down old rolling shutters from different bldgs, sizes 35 to 50 Sqm area each shutters, height upto 9 metre complete all as specified and directed.

45

108

-

... More
Repair/alteration of rolling shutters from different bldgs, sizes 35 to 50 Sqm area each shutters, height 5 to 9 metre, electric mortar, with gear operated type with chain wheel and hand chain, with all allied accessories, straightening of existing curtains, without removing guide channel and rotating pipe, necessary riveting/welding and fixing/welding square girder and flat iron for extra support to both side of guide channel to prevent heavy wind pressure, greasing the guide channel make smooth functioning of shutters and modification of perforation opening for wind in alternate curtains size length 20-30cm x height 4-5cm for heavy wind pressure in every 3rd curtain in full length at 0.50 mtr c/c, height 2.0 mtr in 2 places of each shutter complete all as specified and as directed. Note: The following items shall be measured and paid separatly: - (a) Rotating shaft with 6 springs, (b) Gear box with accessories as sample approved by GE as per relevant IS-6248-1979, (c) Curtains 1.25mm thick, (d) Square girder and flat iron for extra support to both side of guide channels.

45

108

-

... More
Supply and fixing steel rolling shutters, curtains built-up of interlocking lath sections formed from cold rolled steel strips thickness 1.25 mm, with lock plate, handle etc height upto 9 metre and modification/cutting in curtains as a perforation opening for heavy wind pressure in alternate curtains size as length 30cm x height 5cm for heavy wind pressure in every 3rd curtain in full length and 1.00 metre c/c, in each shutter complete all as specified and directed

177

108

-

... More
Fixing only old good conditions curtains to existing unserviceable shutters height upto 9 metre complete all as specified and directed.

100

108

-

... More
Supply and fixing Structural steel work Fe-410W (Gde-E-250) Quality B square section girder and flate iron sections to fixing as extra support vertically on both side of guide channel to prevent heavy wind pressure with welding/ riveting, screwing etc. (as per relevant IS : 6248-1979, Para 7.3.1) complete all as specified and directed. NOTE: Strengthening methodology shall be got approved from Accepting Officer before execution of this item.

11000

108

-

... More
Supply and fixing in repair 0.63mm thick plain galvanised mild steel sheet as in hood cover of rolling shutter, with grade of zinc coating 275 complete all as specified and directed

60

108

-

... More
M&L for preparation of new steel and iron surface/rolling shutters of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

830

108

-

... More
M&L for preparation of old steel and iron surface/rolling shutters of any description over 10cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

5830

108

-

... More
M&L for sub main wiring with 4 core x 0.75 Sqmm (nominal area) size PVC insulated, unsheathed, FRLS with multi-stranded copper conductor, 1100 Volts grade, ISI marked cables, drawn through & including suitable size of heavy duty non-metallic rigid PVC concealed conduit ISI marked not less than 20mm dia & conduit fittings/accessories, fixed concealed in wall/ceiling complete all as specified and directed.

550

108

-

... More
M&L for for dismantling the electric induction motor cappacity 750 watt, current rating 3.6 Amps, output torque-2400 NM, 5.7 RPM, advancing force 1000 Kgf, max upgrade height 9 mtr, power 50 cycle of make Strong Life and Model: SL 1000-1P from the foundation of rolling shutter mechanism after disconnecting electric cable connection etc and transportation to civil workshop for repair & rewinding, strip openng the motor and removing of defective burnt winding, rewinding the motor after cleaning the motor and starter with super enamled copper winding wire of suitable turn and gauge as per the original with proper insulation, reassembling the complete motor and re-fixing at site with electric cable connection, earthing and testing the motor on full load at site after coupling the rolling mechanism for its serviceability up to entire satisfaction of Engineer-in-charge complete all as specified and as directed. .NOTE: (i) Super enamled copper winding wire shall be measured and paid separately under appropriate item of this BOQ as supply only. . (ii) Ball bearing if replaced shall be measured and paid separately under appropriate item of this BOQ as supply only. . (iii) The T&P/vehicle will be arranged by the contractor and cost deemed to be included in the quoted rate of this item. . (iv) Contractor shall visit the site of installed motor before quoting the rate.

82

108

-

... More
Supply only super enameled copper winding wire for re-winding the electric motors complete all as specified and as directed. NOTE: Labour for motor rewinding is included in the quoted rates of Serial item No 16.00 here-in-before.

350

108

-

... More
Supply only ball bearing for electric motor as mentioned in serial item No 16.00 here-in-before as per existing specifications complete all as specified and as directed. NOTE: Labour for fixing is included in the quoted rates of Serial item No 16.00 here-in-before.

328

108

-

... More
S&F in replacement of existing starter in sheet metal enclosure type, 415 Volts, MK-1 suitable for and upto 750 Watt electric motor complete all as specified and as directed.

82

108

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.