Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Sewage Cleaning And Repair Of Sewage Line, Manholes, Septic Tanks, Soakage Wells Including Sludge Removal Cleaning, Jetting By Mechanical Means In Otm Accn In The Aor Of Age B/r-i Under Ge (a) Suratgarh At Suratgarh Mil Stn in Sri Ganganagar, Rajasthan, with an estimated contract value of Rs. 30,00,000. The bid opening date for this tender is 29-10-2026 and the last date for bid submission is 25-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - Rajasthan Tender

Opening Date29 Oct 2026
Closing Date25 Nov 2026
Tender Amount₹ 30,00,000 
Notes
Download

Costs

Description

Sewage Cleaning And Repair Of Sewage Line, Manholes, Septic Tanks, Soakage Wells Including Sludge Removal Cleaning, Jetting By Mechanical Means In Otm Accn In The Aor Of Age B/r-i Under Ge (a) Suratgarh At Suratgarh Mil Stn

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
SEWAGE CLEANING AND REPAIR OF SEWAGE LINE, MANHOLES, SEPTIC TANKS, SOAKAGE WELLS INCLUDING SLUDGEREMOVAL CLEANING, JETTING BY MECHANICAL MEANS IN OTM ACCN IN THE AOR OF AGE B/R-I UNDER GE (A) SURATGARH AT SURATGARH MIL STN
Report Missing Document

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Dewatering/Desludging of manholes of any size and n exc 3 mtr depth by taking out sludge , sludge clay and any other rubbish, by mechnical means using honey sucker machine ,suction motor mounted on vehicle, HCV mounted suction discharge machine having blow back facility with sludge tank of adequate capacity or by any other means and removing ouside MD land in closed containor and dumping in low lying area as directed by EIC, washing the top of manholes and surrounding with fresh water and sprinkling fresh unslaked lime to make the area hygeinic complete all as specified and directed by EIC. Notes:- 1.Desludging shall be done by method as recommended by Engr-in-charge as per the site conditions.

2000

-

-

... More
M&L for dewatering/desilting of soakage well (soakage well of dia exc 3 mtr but not exc 6 mtr and depth exc 5 mtr but not exc 9 mtr) including removing of all solid/semi solid matter including silt residue both organic and inorganic in nature and removing the sludge from the tank by machanical using hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of minimum 5000 ltr and suction tank capacity of 300 ltrs and 260 LPM with minimum 145 bar suction flow of 10200 LPM including skilled driver and operator and supervising technician including provision of water for jetting and removal of sludge/silt/liquid/mud and sand (in foul position) etc out side the MoD land/premises at any distance all as directed by Engr-in-Charge including loading, unloading digging out pit of any size in any type of soil, surring sludge/silt/spoil/mud tec into the pit and spreying bleaching powder over the entire surface complete. Note:- (a) The service provider/contractorduring the mechanized operation shall be equiped with gas monitor, nylon rope ladder, torch light and compressor blower etc along with the sewage cleaning truck mounted suction/jetting machine. (b) The cleaning shall be carried out with machanised operation by means of sludge sucked out with super succer machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site. (c) The unit rate shall deem to include for all material, labour skilled/unskilled) tools and plants and requisite quantity of water for the entire operation and transpotation arrangements. Note :- Approx 5-7% of total qty work under the item shall be executed at Biradhwal location. The rate for this provision shall be deemed included in the quoted rate. Nothing extra shall be paid on this account.

8000

-

-

... More
M&L for dewatering/desilting of Septic Tank/sump (Septic tank of any size depth and depth exc 3 mtr but not exc 9 mtr) including removing of all solid/semi solid matter including silt residue both organic and inorganic in nature and removing the sludge from the tank by machanical using hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of minimum 5000 ltr and suction tank capacity of 300 ltrs and 260 LPM with minimum 145 bar suction flow of 10200 LPM including skilled driver and operator and supervising technician including provision of water for jetting and removal of sludge/silt/liquid/mud and sand (in foul position) etc out side the MoD land/premises at any distance all as directed by Engr-in-Charge including loading, unloading digging out pit of any size in any type of soil, surring sludge/silt/spoil/mud tec into the pit and spreying bleaching powder over the entire surface complete. Note:- (a) The service provider/contractorduring the mechanized operation shall be equiped with gas monitor, nylon rope ladder, torch light and compressor blower etc along with the sewage cleaning truck mounted suction/jetting machine. (b) The cleaning shall be carried out with machanised operation by means of sludge sucked out with super succer machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site. (c) The unit rate shall deem to include for all material, labour skilled/unskilled) tools and plants and requisite quantity of water for the entire operation and transpotation arrangements. Note :- Approx 5-7% of total qty work under the item shall be executed at Biradhwal location. The rate for this provision shall be deemed included in the quoted rate. Nothing extra shall be paid on this account.

1000

-

-

... More
M&LChecking and attending complaints of cleaning/blocking of PVC/CI pipes any dia including checking leakage from bends,clamping the vertical stacks,jointing the leakages from bends , & other fittings/fixtures which is causing obstruction to sewage/waste water flow in PVC/CI stacks including carrying out minor repairs such as replacement of jointning material, or any other repair not mentioned herein before etc to make the PVC/CI functional and leak proof to the satisfaction of the occupants/users under the jurisdiction of AGE B/R I Note: (i) Contractor or his authorised representative collect such type of complaints from B/R I complaint cell at 8.30 AM on daily except Sunday & Holiday. No extra payment shall be made on account of collection of complaint. (ii) Complaints must be completed within 24 hrs without any fail otherwise recovery shall be made double the market rate to the contractor. (iii) Any new items like bends , pipes ,clamps , access doors, cowl etc to be replaced while carrying out these complaints should be replaced under the respective schedules under the BOQ and this item will not be paid for in that case. (iv) The Contractor or his authorised representative shall come on daily basis with necessary equipments as reqd to carry out the necessary complaints. Non availability of equipments in any case will not be admissible

200

-

-

... More
Surface dressing n.exc 15cm deep including Cleaning away all grass vegetation, saplings, shrubs, brush wood under growth and roots for making approach and around septic tanks, soakwells, manholes to manholes for sewage line and removing the rubbish to a distance not exceeding 50 M and deposting as directed by Engineer-in-Charge.

2000

-

-

... More
Demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness(below or above ground level) complete all as specified and directed by Engineer-in-Charge.

22.3

-

-

... More
M&L brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:4) etc complete all as specified and directed by the Engr-in-Charge.

10

-

-

... More
M&L for brick work with fly ash bricks, straight or curved on plan to any radius, built in 1:4 as in half brick thick wall omplete all as specified and directed complete all as specified and directed by the Engr-in-Charge..

20

-

-

... More
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed by the Engr-in-Charge.

2

-

-

... More
Demolition of cement concrete (reinforced) in landing slab ,chullah hoods ,manhole covers , Roofs ,Floors, beams, stair case, landing, chajja and similar suspended work complete all as specified and directed by the Engr-in-Charge.

17.59

-

-

... More
Demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness(below or above ground level) complete all as specified and directed by Engineer-in-Charge.

3

-

-

... More
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

40

-

-

... More
M&L for PCC (1:2:4) type B-1 using (20mm graded stone agg) as in coping incuding necessary form work weathering, slightly rounded or chamfered and throating as directed complete all as specified.

2

-

-

... More
M&L rendering 15 mm thick in CM 1:4 with WPC @ 3% by weight of cement on brick masonry surfaces finished fair and even complete all as specified and directed by Engineer-in-Charge Note : WPC shall be measured and paid for separately under respective item.

500

-

-

... More
M&L rendering 15 mm thick in CM 1:6 on brick masonry, fair and even finished complete all as specified and directed by Engineer-in-Charge.

150

-

-

... More
M&L rendering 5 mm thick in CM 1:3 in ceilings on concrete/RCC surfaces finished fair and even complete all as specified and directed by Engineer-in-Charge.

50

-

-

... More
Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down waith water etc, complete all as specified and directed by Enginner-in-Charge.

100

-

-

... More
Supply only intergral WPC Compound complete all as specified and directed by Enginner-in-Charge.

33.85

-

-

... More
M&L preparing new surfaces of walls, plastered and applying two coat of cement base paint on walls including cornices, pillasteres over one coat of white wash complete all as specified & as directed by Engineer-in-Charge.

500

-

-

... More
M&L for preparing newly plastered surfaces and applying three coats of white wash on walls complete all as specified and directed by Engineer-in-Charge.

50

-

-

... More
M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling/soffits of chajjas complete all as specified and directed by Engineer-in-Charge.

50

-

-

... More
M& L for Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/loose soil including demolition of sewage line complete all as specified and as directed.

68

-

-

... More
Excavating over areas, not exc 1.5m deep and getting out any type of soil and soft/loose soil for soak well complete all as specified and directed by Engr-in-Charge.

20

-

-

... More
All as per above item No. 24 ,exc 1.5m but not exc 3.0m deep complete all as specified and directed by Engr-in-Charge.

15

-

-

... More
All as per above item No. 24 ,exc 3.0m but not exc 4.5m deep complete all as specified and directed by Engr-in-Charge.

8

-

-

... More
Returning, filling in, including spreading,levelling, watering and well ramming in layer not exe 25 cm complete all as specified and as directed

72.45

-

-

... More
Removing excavated materials(soils) to a distance exc 250m but not exc 500 mtr and depositing where complete all as specified and as directed

38.55

-

-

... More
M & L DWCPE (SN8) pipe 150 mm dia (inner) as per IS-16098 (Part-II)( laid in trenches on moorum bed to required shape including all necessary accessories/fitting / jointing/ rings, jointing and testing complete all as specified including demolition of sewage pipe all as specified and as directed. Note :- (i) Pipe shall be laid as per maintaining required slope as directed by Engineer-in-charge. (ii) The make of pipe shall be ISI Marked and as approved by GE.

200

-

-

... More
M & L DWCPE (SN8) pipe 200 mm dia (inner) as per IS-16098 (Part-II)( laid in trenches on moorum bed to required shape including all necessary accessories/fitting / jointing/ rings, jointing and testing complete all as specified including demolition of existing pipeline all as specified and as directed. Note :- (i) Pipe shall be laid as per maintaining required slope as directed by Engineer-in-charge. (ii) The make of pipe shall be ISI Marked and as approved by GE.

80

-

-

... More
M & L DWCPE (SN8) pipe 300 mm dia (inner) as per IS-16098 (Part-II)( laid in trenches on moorum bed to required shape including all necessary accessories/fitting / jointing/ rings, jointing and testing complete all as specified including demolition of sewage pipe all as specified and as directed. Note :- (i) Pipe shall be laid as per maintaining required slope as directed by Engineer-in-charge. (ii) The make of pipe shall be ISI Marked and as approved by GE.

60

-

-

... More
M&L cement concrete (1:2:4) type B-1 (20mm graded stone agg) as in surface channels, drain and benching complete complete all as specified and directed by the Engr-in-Charge.

0.5

-

-

... More
M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc. complete all as specified and directed by Engineer-in-charge.

10

-

-

... More
M&L for cutting into existing manhole/Septic tank/Soak well for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1, smooth finished and reforming benching as required for 150 mm bore pipe complete all as specified and directed by Engineer-in-charge.

10

-

-

... More
M&L for cutting into existing manhole/Septic tank/Soak well for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1, smooth finished and reforming benching as required for 200mm to 300 mm bore pipe complete all as specified and directed by Engineer-in-charge.

10

-

-

... More
M&L for Extra over cast iron pipe 75 mm bore and fittings if lead joint is provided in lieu of cement joint complete all as specified and directed by Engineer-in-charge.

2

-

-

... More
M&L for Extra over cast iron pipe 100 mm bore and fittings if lead joint is provided in lieu of cement joint complete all as specified and directed by Engineer-in-charge.

2

-

-

... More
M&L for 50 mm thick PCC (1:3:6) type C1 using 20 mm graded crushed stone aggregate as in plinth protection, finished fair and even complete all as specified and directed by Engineer-in-charge. Note :- Plinth protection shall be laid to slope (1 in 30) in bays not exceeding 3 metre in length and joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with sealing compound grade B. Cost of ceiling compund is included in the unit rate of this item

50

-

-

... More
M&L for Cement concrete 25mm thick 1:2:4 type BO using 12.5mm graded stone aggregate as in levelling course of floors finished fair and even complete all as specified and directed by Engineer-in-Charge.

20

-

-

... More
M&L for non skid joint free ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6) complete all as specified and directed by Engineer-in-charge.

20

-

-

... More
M&L for glazed ceramic tiles (coloured) 300mm x 450mm x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in cement & sand mortar (1:4) including necesary cutting as per site requirment complete all as specified and directed by Engineer-in-charge.

20

-

-

... More
M&L for TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

200

-

-

... More
M&L steel round bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-charge.

50

-

-

... More
M&L for reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) for slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and other similar works incl necessary form work incl demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed and directed by Engineer-in-Charge.

2.59

-

-

... More
M & L for Formwork to soffits of suspended slabs such as in slabs, floor slabs, landings, shelves, water truff & the like in horixontal or vertically not exceeding 200 mm thick complete all as specified

20

-

-

... More
M&L for Brickwork with sewer bricks straight or curved on plan exc 6 m mean radius for man-holes/septictank/ soakwell etc. in sewer works set in 1:4 cement sand mortar all as specified and as directed.

20

-

-

... More
M&L for cutting to existing bitumionous road for laying Sewage pipe/drain and making good as per Chief Engineer Bathinda Zone road specification in layers (Hardcore, Soling, WMM, BM and Bituminous Carpet) complete all as specified and directed.

26

-

-

... More
M&L PCC 1:2:4 type C 2 (12.5 mm graded aggregate) in roof/floor/wall complete all as specified and directed

1.18

-

-

... More
S&F 75mm bore PVC (SWR) pipes single socketed in any length with solvent joints laid In trenches or in floors complete all as specified and directed by Engineer-in-charge.

10

-

-

... More
S&F 110mm bore PVC (SWR) pipes single socketed in any length with solvent joints laid In trenches or in floors complete all as specified and directed by Engineer-in-charge.

10

-

-

... More
S&F in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate complete all as specified and directed by Engineer-in-Charge.

20

-

-

... More
S&F in repair UPVC (SWR) bend 75mm bore of any radius complete all as specified and directed by Engineer-in-Charge.

50

-

-

... More
S&F in repair UPVC (SWR) ISI Marked bend 75mm bore of any radius with access door complete all as specified and directed by Engineer-in-Charge.

3

-

-

... More
S&F in repair UPVC (SWR) bend 110 mm bore of any radius complete all as specified and directed by Engineer-in-Charge.

10

-

-

... More
S&F in repair UPVC (SWR) bend 110 mm bore of any radius with access door complete all as specified and directed by Engineer-in-Charge.

10

-

-

... More
S&Fin repair UPVC (SWR) PVC (SWR) 75 mm branch piece, single (single Y) equal or unequal with access door complete all as specified and directed by Engineer-in-Charge.

20

-

-

... More
S&F in repair UPVC (SWR) branch piece single PVC (SWR) (Single T) equal or unequal of 110 mm bore with access door complete all as specified and directed by Engineer-in-Charge.

20

-

-

... More
S&F in repair UPVC (SWR) branch piece single PVC (SWR) (Double T) equal or unequal of 110 mm bore with access door complete all as specified and directed by Engineer-in-Charge.

2

-

-

... More
S&F in repairUPVC (SWR) branch piece single PVC (SWR) (Single T) equal or unequal of 75 mm bore with access door complete all as specified and directed by Engineer-in-Charge.

20

-

-

... More
S&F in repair UPVC (SWR) branch piece single PVC (SWR) (Double T) equal or unequal of 75 mm bore with access door complete all as specified and directed by Engineer-in-Charge.

2

-

-

... More
S&F in repair UPVC (SWR) vent cowl 110 mm complete all as specified and directed by Engineer-in-Charge.

20

-

-

... More
S&F CI spun soil,waste and vent pipe 75mm dia laid in floor in any length with or without cars with cement mortar joint complete all as specified and directed

10

-

-

... More
S&F CI spun soil,waste and vent pipe 100 mm dia laid in floor in any length with or without cars with cement mortar joint complete all as specified and directed

6

-

-

... More
Supply & Fixing 75mm bore uPVC pipes grade 'B' single socketed inany length with rubber ring joints, fixed along walls/trenches with and including suitable size clamps/brackets (interval of 1m and pipe keeping 100mm away from wall)of suitable size fixed with fastener/nuts bolt, joints fixed with pipe joints lubricant inclunding bends, socket, Y junction, Tee, cowl etc complete all as specified and as directed by Ingineer -in charge complete including low carbon hot roll gause corrected oil pickeled & drawn pipe supporting clamping system 32x3 mm with rib as specified and directed .( Note : Detail of pipe supporting system is Per Drg No. BTD-916 and BTD-917). Note:- UPVC PIPE and Fitting/FIXTURE:- shall be included in quoted rates.

200

-

-

... More
Supply & Fixing 110mm bore uPVC pipes grade 'B' single socketed inany length with rubber ring joints, fixed along walls/trenches with and including suitable size clamps/brackets (interval of 1m and pipe keeping 100mm away from wall)of suitable size fixed with fastener/nuts bolt, joints fixed with pipe joints lubricant inclunding bends, socket, Y junction, Tee, cowl etc complete all as specified and as directed by Ingineer -in charge complete including low carbon hot roll gause corrected oil pickeled & drawn pipe supporting clamping system 32x3mm withrib as specified and directed .( Note : Detail of pipe supporting system is Per Drg No. BTD-916 and BTD-917). Note:- UPVC PIPE and Fitting/FIXTURE:- shall be included in quoted rates.

200

-

-

... More
S&F in repair bends with/without oval access door (any radius), diminishing pieces or tapers (larger bore measured) for 75 mm bore complete all as specified and directed

3

-

-

... More
S&F in repair CI bends with oval access door (any radius), with duck's foot or heel rest for 75 mm complete all as specified and directed

5

-

-

... More
S&F in repair CI Branch pieces with/without oval access door, single (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches for 75 mm complete all as specified and directed

5

-

-

... More
S&F in repair CI bends with/without oval access door (any radius), diminishing pieces or tapers (larger bore measured) for 100 mm bore complete all as specified and directed

5

-

-

... More
S&F in repair CI bends with/wothout oval access door (any radius), with duck's foot or heel rest for 100 mm complete all as specified and directed

5

-

-

... More
S&F in repair CI Branch pieces with/without oval access door, single (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches for 100 mm complete all as specified and directed

2

-

-

... More
S&F in repair CI Branch pieces with oval access door, double (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches for 100 mm complete all as specified and directed

2

-

-

... More
S&F in repair CI socket (double ) with access door for 100 mm complete all as specified and directed

5

-

-

... More
S&F in repair CI Branch pieces with/without oval access door, double (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches for 75 mm complete all as specified and directed

5

-

-

... More
S&F in repair CI socket/collars (double ) with access door for 75 mm complete all as specified and directed

5

-

-

... More
S&F in repair cast iron 100 mm cowl complete all as specified and directed by Engineer-in-Charge.

2

-

-

... More
S&F in repair CI Traps P or S for 100 mm bore complete all as specified and directed by Engineer-in-Charge.

5

-

-

... More
S&F in repair CI Oval access doors for 75 mm bore complete all as specified and directed by Engineer-in-Charge.

5

-

-

... More
S&F in repair CI Oval access doors for 100 mm bore complete all as specified and directed by Engineer-in-Charge.

5

-

-

... More
S&F for 50mm thick steel fibre reinforced (SFRC) man hole/ drain cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard, minimum load bearing capacity 5 ton/sqm, in square, rectangular or circular shape complete all as specified & as directed.

200

-

-

... More
S&F in repairs salt glazed stone ware gully trap square or round mouthed type 'P' of size 150 x 150 mm with CI grating, setting & jointing with cement with grouting surrounding gully trap with PCC 1:3:6, type C1 block 30x30x45cm together with necessary form work, excavation & earth work in soft/loose soil, complete, all as specified and as directed.

20

-

-

... More
S&F in repair vitreous china squatting pan Orissa pattern, white of size 580x440mm with integral foot rests (excluding flushing cistern and flush pipe) including cast iron 'P' or 'S' trap, PCC filling and connection to trap and flushing pipe, antisyphonage pipe etc complete all as specified and directed by Engineer-in-charge.

20

-

-

... More
S&F in repair Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. with & including hydraulic WC seat cover closed pattern with flat bottom and cover, CP brass Health Faucet, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified & as directed by Engineer-in-charge. Make : Jaquar or Hindware or Kohler as approved by GE.

2

-

-

... More
S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic Hydraulic WC seat cover white/black closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device, including PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle, PVC connection 450mm long. complete all as specified and directed by Enginner-in-Charge.

5

-

-

... More
S&F uPVC (SWR)75 mm floor trap, including SS grating, jointing with solvent cement and PCC 1:2:4 type C2 (12.5 graded aggregate) all as specified and as directed. Note : PCC 1:2:4 shall be measured and paid for separately under respective item. Note :- Old unserviceable/serviceable material retrieved from above mentioned all items shall be deposited in store yard of subdivision by the contractor at his own arrangement. Noting extra shall be paid on this account.

10

-

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.