Military Engineer Services Tender

... More
The Military Engineer Services has issued a formal invitation for competitive bids for Repair Maint Of Internal Electrification Of Itarana Palace At Alwar Mil Stn in Alwar, Rajasthan, with an estimated contract value of Rs. 23,00,000. The bid opening date for this tender is 22-10-2026 and the last date for bid submission is 19-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services Tender - Rajasthan Tender

Opening Date22 Oct 2026
Closing Soon19 Nov 2026
Tender Amount₹ 23,00,000 
Notes
Download

Costs

Description

Repair Maint Of Internal Electrification Of Itarana Palace At Alwar Mil Stn

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
All as per preceding item but for one ceiling fan/exhaust fan point controlled by one switch and regulator, including suitable ceiling rose/connector and necessary connections, complete all as specified and directed.

20

-

-

... More
All as per item for one light point hereinbefore but for one 3-pin, 5A switch-socket outlet provided on the same board with other switches, including necessary connections, complete all as specified and directed.

10

-

-

... More
All as per item for one light point hereinbefore but for one 3-pin, 5A switch-socket outlet point provided on an independent board, including necessary connections, complete all as specified and directed.

40

-

-

... More
All as per item for one light point hereinbefore but for one bell/buzzer point controlled by one bell push, including necessary connections, complete all as specified and directed.

4

-

-

... More
All as per item for one light point hereinbefore but for one two-way light point controlled by two two-way switches, including necessary connections, complete all as specified and directed.

2

-

-

... More
All as per concealed point wiring item hereinbefore but with two single-core, PVC-insulated, unsheathed, multistranded copper conductor cables of size 4 sq mm and PVC-insulated, unsheathed, multistranded copper conductor earth wire of size 4 sq mm for 15A power points for geysers/air-conditioners, including conduit, accessories, connections and modular box/cover plate as specified in the preceding item, complete all as specified and directed.

50

-

-

... More
All as per concealed point wiring item hereinbefore but with two single-core, PVC-insulated, unsheathed, multistranded copper conductor cables of size 2.5 sq mm and PVC-insulated, unsheathed, multistranded copper conductor earth wire of size 2.5 sq mm for 15A power points, including conduit, accessories, connections and modular box/cover plate as specified in the preceding item, complete all as specified and directed.

50

-

-

... More
M&L for point wiring with 1.5 sq mm single-core, PVC-insulated, unsheathed, multistranded copper conductor FRLSH cable, 1100 volts grade, including 1.5 sq mm single-core, PVC-insulated, unsheathed, multistranded copper conductor FRLSH cable of green colour as continuous earth wire, connected to earth dolly and drawn into and including PVC casing and capping with accessories, fixed on the surface of walls/ceilings by means of PVC sleeves/dash fasteners with cadmium-plated screws, terminated in existing/new wooden terminal box for mounting switches, socket outlets, regulators etc, including new 3 mm thick phenolic laminated sheet top cover fixed on the terminal box, for one light point controlled by one one-way switch, complete all as specified and directed.

200

-

-

... More
All as per item hereinbefore but for one ceiling/exhaust fan point controlled by one switch and regulator, complete all as specified and directed.

60

-

-

... More
All as per item hereinbefore but for one 3-pin, 5A switch-socket outlet on the same board with other switches, complete all as specified and directed.

40

-

-

... More
All as per item hereinbefore but for one 3-pin, 5A switch-socket outlet point on an independent board, complete all as specified and directed.

150

-

-

... More
All as per item hereinbefore but for one bell/buzzer point controlled by one bell push, complete all as specified and directed.

5

-

-

... More
All as per item hereinbefore but for one two-way point controlled by two two-way switches, complete all as specified and directed.

10

-

-

... More
All as per item hereinbefore but wiring with 4 sq mm multistranded copper conductor cables and 4 sq mm copper conductor earth wire for a 15A power point, complete all as specified and directed.

150

-

-

... More
All as per item hereinbefore but wiring with 2.5 sq mm multistranded copper conductor cables and 2.5 sq mm copper conductor earth wire for a 15A power point, complete all as specified and directed.

150

-

-

... More
S&F modular piano-type one-way switch, 6A, 230/250 volts grade, one module, on the top cover provided under the point-wiring items, complete all as specified and directed.

570

-

-

... More
S&F modular piano-type two-way switch, 6A, 230/250 volts grade, one module, on the top cover provided under the point-wiring items, complete all as specified and directed.

24

-

-

... More
S&F modular piano-type one-way switch, 16A, 230/250 volts grade, one module, on the top cover provided under the point-wiring items, complete all as specified and directed.

400

-

-

... More
S&F modular piano-type bell push, 6A, one module, on the top cover provided under the point-wiring items, complete all as specified and directed.

9

-

-

... More
S&F multipurpose modular socket outlets, flush-mounting type, 230/250 volts grade, fitted on top covers provided under the point-wiring items, for modular 2-in-1, 3-pin, 5A socket outlet, 2 modules complete all as specified and directed.

234

-

-

... More
All as per item hereinbefore but modular 2-in-1, 3-pin, 15A socket outlet, flush-mounting type, complete all as specified and directed.

400

-

-

... More
S&F modular-type ceiling rose, surface-mounted, bakelite, with two to three terminals, 5A, complete all as specified and directed.

285

-

-

... More
S&F modular-type PVC AC box with 3-in-1 socket outlet of 32A capacity, including one single-pole, 32A, 240V MCB, necessary fixing arrangements and all incoming and outgoing electrical connections, complete all as specified and directed by the Engineer-in-Charge.

40

-

-

... More
S&F modular switch/socket PVC box, 8-module, surface-mounted type, including cover plate with frame, necessary fixing arrangements and all incoming and outgoing electrical connections, complete all as specified and directed by the Engineer-in-Charge.

50

-

-

... More
All as per item hereinbefore but modular switch/socket PVC box, 12-module, surface-mounted type, complete with cover plate, frame, necessary fixing arrangements and all incoming and outgoing electrical connections, complete all as specified and directed by the Engineer-in-Charge.

30

-

-

... More
All as per item hereinbefore but modular switch/socket PVC box, 6-module, surface-mounted type, complete with cover plate, frame, necessary fixing arrangements and all incoming and outgoing electrical connections, complete all as specified and directed by the Engineer-in-Charge.

40

-

-

... More
All as per item hereinbefore but modular switch/socket PVC box, 4-module, surface-mounted type, complete with cover plate, frame, necessary fixing arrangements and all incoming and outgoing electrical connections, complete all as specified and directed by the Engineer-in-Charge.

20

-

-

... More
All as per item hereinbefore but modular switch/socket PVC box, 3-module, surface-mounted type, complete with cover plate, frame, necessary fixing arrangements and all incoming and outgoing electrical connections, complete all as specified and directed by the Engineer-in-Charge.

20

-

-

... More
S&F in replacement PVC batten/patti cable trunking of size 25 mm x 16 mm, including all necessary fixing arrangements, tees, bends, sockets, flexible conduits, fixing screws etc, and reinstating disturbed electrical wiring passing through the trunking, including making electrical connections to existing circuits, complete all as specified and directed by the Engineer-in-Charge.

100

-

-

... More
S&F in replacement rigid non-metallic PVC conduit, 20 mm dia, excluding boxes, junction boxes and terminal boxes but including tees, bends, elbows, reducers, bell mouths, tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc, complete all as specified and directed by the Engineer-in-Charge.

100

-

-

... More
S&F in repair LED batten, 1.2 m long, with CRCA sheet housing and PC glossy diffuser, duly prewired for connection, having nominal system lumen output of 2000 lumens, minimum system efficacy of 115 lumens per watt and total power consumption not exceeding 20 watts, including driver, rated system life of 40,000 burning hours at L70, colour temperature of 6500 K, CRI greater than 80, THD less than 10% and power factor greater than 0.95, complete all as specified and directed. Make/Model: Crompton Cat. Part No. CIS-305-40-57-SL-DP-NWH / Philips Cat. Part No. BN308C LED20S-6500 L120 PSU WH / Havells Cat. Part No. Stella 20 Watt Glamtube LHEWAJPGPV1D020.

100

-

-

... More
S&F in repair lamp holder with insulated body and back plate for angle/batten fitting, suitable for LED lamp of 9 watts, complete all as specified and directed.

20

-

-

... More
S&F in replacement 20-watt emergency LED inverter bulb, B-22 cap, with inbuilt lithium battery providing backup of at least 4 hours, deep-discharge protection and fast-charging facility, suitable for cool daylight operation during power failure, including minimum two-year warranty, complete all as specified and directed. Make: Havells/Philips/Bajaj.

10

-

-

... More
S&F in replacement wall-mounted decorative light fitting in antique brass finish, with polished brass base plate, two aesthetically designed frosted glass cups in durable metallic housing and integral E27 lamp holders, including insulated back plate for angle/batten mounting and all necessary fixing accessories, complete all as specified and directed.

15

-

-

... More
S&F in replacement wall-mounted decorative light fitting in antique brass finish, with polished brass base plate, one aesthetically designed frosted glass cup in durable metallic housing and integral E27 lamp holder, including insulated back plate for angle/batten mounting and all necessary fixing accessories, complete all as specified and directed.

10

-

-

... More
S&F in replacement wall-mounted decorative mashal-type light fitting with aesthetically designed frosted glass cup, durable metallic housing and integral lamp holder suitable for two-pin or screw-type lamp, including insulated back plate for angle/batten mounting and all necessary fixing accessories, complete all as specified and directed.

15

-

-

... More
S&F ceiling/surface-mounted decorative light fitting with aesthetically designed frosted glass casing, durable metallic housing and integral lamp holder, including warm-white LED lamp or 12-watt warm-white LED strip with inbuilt driver, designer golden-colour back plate for angle/batten mounting and all necessary fixing accessories, complete all as specified and directed.

25

-

-

... More
S&F LED heritage-type garden bollard light fitting, 9 watts, overall height of complete fitting 1050 mm, with integral decorative LED lamp, E27 holder, opal acrylic diffuser and IP66 protection, including all necessary fixing arrangements and accessories, complete all as specified and directed.

15

-

-

... More
S&F recessed-type LED downlighter, 9 watts, with opal acrylic diffuser and IP66 protection, including all necessary fixing arrangements and accessories, complete all as specified and directed. Make: Bajaj /Philips/Havells/Crompton.

20

-

-

... More
S&F 7.5 m high designer lighting pole with double-arm bracket, finished with polyester/PU paint, fabricated from hot-dip galvanised MS tubes with aluminium embellishments, including integral junction box at the pole base with provision for cable looping in and out and one 16A single-pole MCB, suitable for mounting luminaires on both sides, including square base plate of size 300 x 300 mm and 12 mm thickness, with 210 mm centre-to-centre bolt holes and 25 mm dia holes, four anchor bolts, and PCC foundation of required dimensions, complete with fixing, alignment and all necessary accessories, complete all as specified and directed. Make: Halonix/Havells/Bajaj or equivalent as approved by GE.

2

-

-

... More
S&F in replacement energy-efficient LED streetlight fitting, 80 watts, ornamental road-light type, with spun-sheet aluminium heat-sink/main housing, including all accessories and electrical connections using 2-core flexible copper conductor cable of size 23/0.00076 from ceiling rose to light fitting, complete all as specified and directed by the Engineer-in-Charge, conforming to the following requirements: (a) minimum luminaire system efficacy of 100 lumens/watt; (b) input voltage range 140–270 volts; (c) operating temperature range −5°C to +50°C; (d) power factor not less than 0.95; (e) THD less than 10%; (f) IP65 protection; (g) CCT not less than 5700 K; (h) white-coloured polycarbonate housing; (j) LED driver of the same make as the luminaire; (k) driver with open-circuit, short-circuit and overvoltage protection as per manufacturer’s standard design; (l) surge protection not less than 2.5 kV; (m) CRI not less than 70; (n) rated life of 50,000 burning hours at L70, based on average daily operation of 10–12 hours; (o) driver efficiency not less than 85%; and (p) system current less than 386 mA.

2

-

-

... More
S&F LED garden spike light fitting, 3 watts, with integral decorative LED light source, opal acrylic diffuser and IP66 protection, including spike, fixing arrangements and all necessary accessories, complete all as specified and directed. Make: Bajaj/Philips/Havells/Crompton.

10

-

-

... More
S&F in repair LED floodlight fitting, 50 watts, white/warm-white light, with pressure-die-cast aluminium housing and heat sink, high-power LEDs, secondary optics, IP66 protection and all necessary accessories, suitable for architectural façade illumination and general-purpose lighting, fixed to the existing clamp and connected to the existing cable, including nuts, bolts and washers, complete all as specified and directed by the Engineer-in-Charge. Note: Rates shall include tools and plant and suitable tradesmen required for fixing the floodlights at high mast/building or other locations as decided by the Engineer-in-Charge.

10

-

-

... More
S&F surface-mounted COB LED fixture, 18 watts, including 4 ft long track, pressure-die-cast aluminium housing and heat sink, clear PC cover, white powder-coated finish, integrated electronic LED driver and prewired connections, with nominal system lumen output of 2000 lumens, minimum system efficacy of 115 lumens/watt, total power consumption not exceeding 18 watts, rated system life of 40,000 burning hours at L70, colour temperature of 6500 K, CRI greater than 80, THD less than 10% and power factor greater than 0.95, complete all as specified and directed.

4

-

-

... More
S&F in repair LED floodlight fitting, 170 watts, kesariya-coloured illumination, with pressure-die-cast aluminium housing and heat sink, high-power LEDs, secondary optics, IP66 protection and all necessary accessories, suitable for architectural façade illumination and general-purpose lighting, fixed to the existing clamp and connected to the existing cable, including nuts, bolts and washers, complete all as specified and directed by the Engineer-in-Charge. Note: Rates shall include tools and plant and suitable tradesmen required for fixing the floodlights at high mast/building or other locations as decided by the Engineer-in-Charge.

4

-

-

... More
S&F in repair LED floodlight fitting, 170 watts, white-coloured illumination, with pressure-die-cast aluminium housing and heat sink, high-power LEDs, secondary optics, IP66 protection and all necessary accessories, suitable for architectural façade illumination and general-purpose lighting, fixed to the existing clamp and connected to the existing cable, including nuts, bolts and washers, complete all as specified and directed by the Engineer-in-Charge. Note: Rates shall include tools and plant and suitable tradesmen required for fixing the floodlights at high mast/building or other locations as decided by the Engineer-in-Charge.

4

-

-

... More
S&F in repair LED floodlight fitting, 170 watts, green-coloured illumination, with pressure-die-cast aluminium housing and heat sink, high-power LEDs, secondary optics, IP66 protection and all necessary accessories, suitable for architectural façade illumination and general-purpose lighting, fixed to the existing clamp and connected to the existing cable, including nuts, bolts and washers, complete all as specified and directed by the Engineer-in-Charge. Note: Rates shall include tools and plant and suitable tradesmen required for fixing the floodlights at high mast/building or other locations as decided by the Engineer-in-Charge.

4

-

-

... More
S&F LED ground-buried light fitting, 3 watts, with integral decorative three-dot LED arrangement, opal acrylic diffuser and IP66 protection, including all necessary fixing arrangements and accessories, complete all as specified and directed.

10

-

-

... More
S&F flexible LED strip, white/warm-white illumination, minimum luminous efficacy of 110 lumens/watt, rated life of 45,000 burning hours, IP54 protection and correlated colour temperature of 4000 K, including compatible LED driver, fixing accessories and necessary electrical connections, complete all as specified and directed.

40

-

-

... More
S&F in replacement recessed-mounted LED panel light, 36 watts, ultra-slim edge-lit type, 2 ft x 2 ft, square, aluminium-cased, white finish, suitable for low-ceiling applications, with three-in-one selectable colour temperature of 3000 K/4000 K/6000 K, including LED driver, prewiring, dismantling and taking down existing unserviceable recessed light fitting, and making electrical connections, complete all as specified and directed by the Engineer-in-Charge.

10

-

-

... More
S&F in replacement recessed-mounted LED panel light, 24 watts, ultra-slim edge-lit type, 1 ft x 1 ft, square, aluminium-cased, white finish, suitable for low-ceiling applications, with three-in-one selectable colour temperature of 3000 K/4000 K/6000 K, including LED driver, prewiring, dismantling and taking down existing unserviceable recessed light fitting, and making electrical connections, complete all as specified and directed by the Engineer-in-Charge.

20

-

-

... More
S&F in replacement recessed-type LED sky-panel light fitting, 36 watts, size 600 x 600 mm, depicting white clouds against a sky-blue background, with integrated electronic driver, energy-efficient LED light source, 230V rating, CCT 6500 K, internal prewiring and all accessories, including connecting up with twin-core twisted flexible copper conductor cable of suitable size, complete all as specified and directed by the Engineer-in-Charge.

20

-

-

... More
S&F in replacement 12-watt emergency LED inverter bulb, B-22 cap, with three-in-one colour control (cool white/warm white/natural white), inbuilt lithium battery providing backup of at least four hours, deep-discharge protection and fast-charging facility, suitable for providing illumination during power failure, including a minimum two-year warranty, complete all as specified and directed. Make: Havells/Philips/Bajaj.

10

-

-

... More
S&F in replacement decorative LED mirror light fitting, adjustable type, 2 ft long, 10 watts, 220V AC, with high-output diffuser, including connecting up with three-core flexible copper conductor cable of suitable size and all necessary accessories, complete all as specified and directed by the Engineer-in-Charge.

8

-

-

... More
S&F sheet-metal enclosure with single-pole and neutral arrangement, 2-pin-and-earth plug and socket, including one single-pole, 20A, 240V MCB, necessary fixing arrangements and all incoming and outgoing electrical connections, complete all as specified and directed by the Engineer-in-Charge.

4

-

-

... More
S&F concealed-type sheet-metal distribution board enclosure, double-door type, suitable for SPN MCBs, with 200A-rated busbar and 8-way arrangement, 230V, including taking down the existing unserviceable 8-way SPN distribution board and making good disturbed wall surfaces, complete all as specified and directed.

20

-

-

... More
S&F concealed-type sheet-metal distribution board enclosure, double-door type, suitable for SPN MCBs, with 200A-rated busbar and 4-way arrangement, 240V, including taking down the existing unserviceable 4-way SPN distribution board and making good disturbed wall surfaces, complete all as specified and directed.

4

-

-

... More
S&F concealed-type sheet-metal distribution board enclosure, single-door type, suitable for SPN MCBs, 2-way, 230V, without busbar, including taking down the existing unserviceable 2-way SPN distribution board and making good disturbed wall surfaces, complete all as specified and directed.

2

-

-

... More
S&F concealed-type sheet-metal distribution board enclosure, double-door type, suitable for TPN MCBs, 4-way, 415V, including taking down the existing unserviceable 4-way TPN distribution board and making good disturbed wall surfaces, complete all as specified and directed.

8

-

-

... More
S&F concealed-type sheet-metal distribution board enclosure, double-door type, suitable for TPN MCBs, 8-way, 415V, including taking down the existing unserviceable 8-way TPN distribution board and making good disturbed wall surfaces, complete all as specified and directed.

4

-

-

... More
S&F in replacement vertical TPN distribution board, 4-way, suitable for four double-pole outgoing MCBs of 40A each, with one incoming 4-pole, 100A, 16kA MCCB, including 250A-rated copper busbar, flush-mounted double-door enclosure, IP30 protection and IK08 impact resistance, complete all as specified and directed.

4

-

-

... More
S&F in replacement single-pole (SP), 6–32A MCB. 240V, 10kA breaking-capacity, C-curve miniature circuit breakers (MCBs) in existing distribution boards, including connections, testing and commissioning, complete all as specified and directed by the Engineer-in-Charge:

150

-

-

... More
All as per item hereinbefore but single-pole and neutral (SPN), 40–63A MCB.

40

-

-

... More
All as per item hereinbefore but single-pole and neutral (SPN), 16–32A MCB.

40

-

-

... More
All as per item hereinbefore but triple-pole and neutral (TPN), 16–32A MCB.

12

-

-

... More
All as per item hereinbefore but triple-pole and neutral (TPN), 40–63A MCB.

18

-

-

... More
Disconnecting and taking out the existing unserviceable MCCB from the panel after disconnecting the cables, and S&F new 4-pole, 160A MCCB of 36kA breaking capacity, suitable for 415V, 50Hz, 3-phase supply, fixed in the existing panel and connected to the existing cables, including nuts, bolts, washers and all necessary accessories, complete all as specified and directed.

2

-

-

... More
Disconnecting and taking out the existing unserviceable MCCB from the panel after disconnecting the cables, and S&F new 3-pole-plus-neutral, 63A MCCB of 16kA breaking capacity, suitable for 415V, 50Hz, 3-phase supply, fixed in the existing panel and connected to the existing cables, including nuts, bolts, washers and all necessary accessories, complete all as specified and directed.

2

-

-

... More
S&F 1100V grade, 2.5 sq mm, 3-core, PVC-insulated, unsheathed, multistranded copper conductor cable, complete all as specified and directed by the Engineer-in-Charge.

100

-

-

... More
S&F 1100V grade, 1.5 sq mm, 3-core, PVC-insulated, unsheathed, multistranded copper conductor cable, complete all as specified and directed by the Engineer-in-Charge.

100

-

-

... More
S&F 1100V grade, heavy-duty, PVC-insulated aluminium conductor service cable, twin-core, flat or circular type, with inner PVC tape sheathing and overall PVC weatherproof sheath, having stranded conductors of size 10 sq mm, complete all as specified and directed.

100

-

-

... More
M&L for sub-main wiring in replacement with two runs of 4 sq mm single-core, PVC-insulated, unsheathed, FRLS copper conductor cables drawn through PVC conduit of suitable size, including one run of 4 sq mm single-core, PVC-insulated, unsheathed, multistranded copper conductor earth wire of green colour, conduit accessories and necessary connections, including taking down existing unserviceable sub-main wiring and making good disturbed surfaces, complete all as specified and directed. Note: Two runs of cable, one run of earth wire and one run of PVC conduit with accessories shall be measured as one length.

150

-

-

... More
S&F sub-main wiring with 1100V grade, FRLSH, PVC-insulated, unsheathed, multistranded, single-core copper conductor cables of size 6 sq mm, drawn through and including PVC conduit concealed in walls, including cutting chases in stone/brick walls, and one continuous earth wire of size 6 sq mm, green colour, comprising PVC-insulated, unsheathed, multistranded, single-core copper conductor cable conforming to applicable IS 694, including taking down existing unserviceable sub-main wiring and making good disturbed surfaces, complete all as specified and directed. Note: Two runs of cable, one run of earth wire and one run of PVC conduit with accessories shall be measured as one length.

300

-

-

... More
Supply, laying, jointing and testing 25 sq mm, 4-core cable XLPE-insulated, armoured, heavy-duty LT underground electric cable, 1100V grade, with stranded aluminium conductors, laid in trenches/ducts, through pipes, under floors or roads or along poles, complete all as specified and directed. Note: Sand cushioning, cable protection, GI protection pipes, clamps, jointing kits, excavation and earthwork shall be measured and paid for separately.

100

-

-

... More
All as per preceding item but for 10 sq mm, 2-core cable, complete all as specified and directed.

100

-

-

... More
Excavating in trenches not exceeding 1.5 m in width and 1.5 m in depth for foundations, shafts, walls, manholes, laying of cables, pipes etc, not exceeding 10 sq m on plan, in soft/loose soil, and getting out the excavated material, complete all as specified and directed.

32.4

-

-

... More
Returning, filling in excavations with excavated soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil, complete all as specified and directed.

15.92

-

-

... More
Removing excavated soil/material to a distance not exceeding 50 m and depositing it where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed.

16.48

-

-

... More
M&L for providing dry-laid fly-ash bricks conforming to IS 13757, laid flat and abutting each other with gaps between adjacent bricks not exceeding 10 mm, over underground cables for cable protection, complete all as specified and directed.

0.96

-

-

... More
M&L for providing dry sand cushioning and punning for underground cables, complete all as specified and directed. Note: For payment purposes, only the punned thickness shall be measured.

14.58

-

-

... More
M&L in replacement for providing and fixing light-grade GI pipe of 40 mm bore for protection of LT cables at walls, poles and road crossings, including clamps and necessary fixing accessories, complete all as specified and directed.

80

-

-

... More
Supply, install, test and commission, in replacement, a compartmental-type LT busbar panel, lockable, fabricated from 3.15 mm thick CRCA sheet, of approved weatherproof design, framed with 40 mm x 40 mm x 6 mm angle iron, with double doors at front and rear, both sides openable, finished with two coats of Siemens grey paint, including cable-entry glands, foundation/grouting and PCC as required at site, complete with the following: (a) Aluminium busbars, 300A capacity, one set comprising four strips. (b) Four-pole, 415V, 250A MCCB, one number. (c) LED-type R-Y-B phase-indicating lamps with fuses, three numbers. Complete all as specified and directed.

1

-

-

... More
Disconnecting the existing unserviceable changeover switch of 400A capacity from the cables, taking down and removing it from the panel, and S&F new on-load changeover switch complete with sheet-metal enclosure, suitable for 415V, 50Hz, 3-phase supply, fixed in the existing panel and connected to the existing cables, including nuts, bolts, washers and all necessary accessories, complete all as specified and directed.

1

-

-

... More
All as per preceding item but for 250A capacity, complete all as specified and directed.

1

-

-

... More
All as per preceding item but for 200A capacity, complete all as specified and directed.

1

-

-

... More
All as per preceding item but for 100A capacity, complete all as specified and directed.

1

-

-

... More
M&L for PCC (1:2:4), Type B1, using 20 mm graded stone aggregate, as coping to electric poles/struts etc, including necessary formwork, weathering with slightly rounded or chamfered angles, throating and finishing all exposed faces of concrete, complete all as specified and directed. Note: Volume of poles/struts embedded in concrete shall be deducted.

0.05

-

-

... More
M&L for PCC (1:4:8), Type D2, using 40 mm graded aggregate, as foundation to electric poles/struts etc, including necessary formwork and fair finish to exposed surfaces without using extra cement, complete all as specified and directed. Note: Volume of poles/struts embedded in concrete shall be deducted.

0.54

-

-

... More
M&L for PCC (1:3:6), Type C2, using 40 mm graded stone aggregate, as coping to electric poles or stay assemblies etc, complete all as specified and directed by the Engineer-in-Charge.

0.11

-

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.