Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Repair To Sanitary Fittings, Glazing, Flooring Etc Of Hq Swc, Central Institute In Zone-i Area Of Ge Jaipur in Jaipur, Rajasthan, with an estimated contract value of Rs. 35,00,000. The bid opening date for this tender is 03-11-2026 and the last date for bid submission is 17-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - Rajasthan Tender

Opening Date3 Nov 2026
Closing Soon17 Nov 2026
Tender Amount₹ 35,00,000 
This is an estimated amount, exact amount may vary.
Notes
Download

Costs

Description

Repair To Sanitary Fittings, Glazing, Flooring Etc Of Hq Swc, Central Institute In Zone-i Area Of Ge Jaipur

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
M&L preparing old decorated surface of ceiling including brooming down and cleaning the surfaces and and applying one coat of oil bound distemper, white or tinted (copolymer based resin glue to be added for longer durability and better finish) using hand roller /brush including repairing of surface/ filling holes with acrylic wall putty complete all as specified and as directed

200

-

-

... More
M&L preparing old decorated surface of ceiling including brooming down and cleaning the surfaces and and applying two coats of oil bound distemper, white or tinted (copolymer based resin glue to be added for longer durability and better finish) using hand roller /brush including repairing of surface/ filling holes with acrylic wall putty complete all as specified and as directed

200

-

-

... More
M&L for complete removal exising treatment on old plastered surfaces of wall by mechanical means thourughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smooth surfaces, including all necessary arrangement for execution of work, preparation of surafce and applying two coat of premium acrylic smooth exterior emulsion paint, 1st quality (company depot tinted) of approved manufacturers in required colour and shade using hand roller over a coat of primer complete all as specified and directed.

700

-

-

... More
M&L for complete removal exising treatment on old plastered surfaces of wall by mechanical means thourughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smooth surfaces, including all necessary arrangement for execution of work, preparation of surafce and applying two coats of premium acrylic smooth exterior emulsion paint, 1st quality (company depot tinted) of approved manufacturers in required colour and shade using hand roller over a coat of primer over 1mm thick acrylic wall care putty iincl rubbing the surface complete all as specified and directed.

700

-

-

... More
M&L preparing old decorated surface of wall including sand paper gentle rubbing to obtain smooth surfaces, including all necessary arrangement for execution of work, preparation of surafce including necessary putty filling in holes/ uneven surface with acrylic putty and applying one coat of premium acrylic smooth exterior emulsion paint, 1st quality (company depot tinted) of approved manufacturers in required colour and shade using hand roller over a coat of primer complete all as specified and directed.

500

-

-

... More
M&L preparation of old decorated surfaces of walls, pillars and cornices, including brooming down and cleaning the surfaces and applying one coat of plastic emulsion paint (Glossy) complete all as specified & as directed. Note : Work will be carried out height upto 20 Mtr all necessary approaching mtrl and saftey gear for labour included in rate.

300

-

-

... More
M&L preparation of old decorated surfaces of walls, pillars and cornices, including brooming down and cleaning the surfaces and applying two coats of plastic emulsion paint (Glossy) over and ncluding applying one coat of primer complete all as specified & as directed. Note : Work will be carried out height upto 20 Mtr all necessary approaching mtrl and saftey gear for labour included in rate.

300

-

-

... More
M&L for preparation of old painted surfaces of wood or wood based materials of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

50

-

-

... More
M & L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats complete all as specified and directed.

50

-

-

... More
M&L preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified & as directed.

40

-

-

... More
M&L for thoroughly clean the floor with wire brush and clean with water removing loose paint, dust and grime, address any cracks or dampness issues by reparing, applying two coat of super gloss floor paint (Suitable for floor) over a coat of self priming coat after suitable interval as per direction of manufacturers all as specified and directed.

400

-

-

... More
Demolition of stone slab and tiles of any description or thickness in floor aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

5.2

-

-

... More
M&L for machine cut kota stone slab flooring 20-25mm thick of min size 400 x 400 mm or 600 X 600mm in floor laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing laid over and including 15 mm thick screed bed in CM 1:6 including rubbing and mirror polishing complete all as specified and directed

20

-

-

... More
M & L machine cut kota stone slab 20-25mm thick on vertical surface of wall, riser, steps, skirting, dado and pillar etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 10 mm thick cement plaster in CM 1:4 including rubbing and mirror polishing complete all as specified and directed

10

-

-

... More
M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

10

-

-

... More
M & L for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick plaster in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

2

-

-

... More
M&L 18-20 mm thick kesaria Green marble (table rubbed & polished) in cooking platforms & edges in and like in CM 1:4 incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rubbing and polishing laid over 15mm thick screed base in CM 1:6 complete all as specified and directed .

10

-

-

... More
M & L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed.

200

-

-

... More
Demolition of brick work or stone/ boulder masonary, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

5

-

-

... More
M&L for brick work with sub-class 'B' bricks (old size), straight or curved on plan exc 6m mean radius built in In cement mortar 1:4 complete all as specified and directed

5

-

-

... More
Taking down cement plaster or cement lime plaster, any description on brick, stone walls or concrete surface of ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

400

-

-

... More
M&L for rendering 15mm thick in CM 1:6 on fair faces of brick masonry surfaces or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

150

-

-

... More
M&L for rendering 15 mm thick in CM 1:4 incl mixing of WPC as per manufacturers instruction, on fair faces of brick masonary or concrete surfaces of wall, finished even and smooth without using extra cement incl necessary scaffolding upto any height complete all as specified and directed by Engr-in-charge.

200

-

-

... More
M&L for rendering 10 mm thick in CM 1:3 on concrete surface of ceiling finished even and smooth without using extra cement complete all as specified and directed.

50

-

-

... More
M & L for preparation of new plastered ceiling surfaces and applying two coat of distemper oil emulsion of approved tint complete all as specified and directed.

50

-

-

... More
M&L for preparation of newly plastered surface of walls and applying two coats of premium acrylic smooth exterior emulsion paint, 1st quality (company depot tinted) of approved manufacturers in required colour and shade using hand roller over and including one coat of alkali resistant priming paints complete all as specified and directed .

200

-

-

... More
M & L for preparation of new plastered wall surfaces and applying two coats of distemper oil emulsion of approved tint over and including priming plastered surfaces with alkali resistant priming paint complete all as specified and directed.

150

-

-

... More
S & F in repair SS Grating doom 100 mm dia with or without waste hole including fixing in CM 1:4 complete all as specified and directed.

50

-

-

... More
Taking down of shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and as directed.

20

-

-

... More
Taking down of shutters of any description exc 2 sqm each complete all as specified and as directed.

5

-

-

... More
Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

10

-

-

... More
Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

28

-

-

... More
M&L mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete Fe 290 (Gde- E- 165) complete all as specified and directed. Note:- Cost of welding butt hinges to the door frame deemed to included in quoted rate also adjucent area damage during fixing door frame will be repair by contractor without any extra cost.

60

-

-

... More
S & F 35mm thick factory made plain framed, panelled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003(Part I) complete as directed and specified.

13.68

-

-

... More
S & F 35mm thick factory made second class hardwood glazed and skelton door shutter kiln seasoned and chemically treated, open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete. The size of members of shutters shall be as specified in MES SSR Part-I complete as directed and specified.

14.04

-

-

... More
S&F 30mm thick factory made flush shutter, solid core construction, with block board core and 0.9mm thick mica/ decarative lamination type 1 on both sides complete all as specified and directed.

14.82

-

-

... More
S&F 30mm thick factory made flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

15.6

-

-

... More
S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube of 1.25 mm thickness suppling & fixing in opening as per specification & drawing given in SSR Part-I complete as directed and specified.

37.6

-

-

... More
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

19.95

-

-

... More
S & F solid PVC door frame of size 50mm x 100mm made out of 5mm plain colour PVC sheet reinforced with MS square/rectangular tube of 1.25 mm thickness suppling & fixing in opening as per manufacturers specification & drawing given and complete as specified and directed by Engineer in charge.

73.6

-

-

... More
S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design and any colour with 2mm thick Moulded Prelaminated PVC Sheet on the front face & 2mm prelaminated PVC Sheet on back face and wood free EPS shall be sandwitch between the front and Back prelaminated sheet and supplying & fixing in frame at site as per specification & drawing suppling & fixing in the frame at site as per specification & drawing given in SSR Part-I complete as directed and specified.

14.82

-

-

... More
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

7.64

-

-

... More
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

7.64

-

-

... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. Note : Butt hinges included under quoted rates

10.64

-

-

... More
M&L for preparation of new wooden or wood based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

95.47

-

-

... More
M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

10

-

-

... More
S & F 150mm long handles, extruded aluminium alloy, fabricated type anodised complete all as specified and directed.

140

-

-

... More
S&F 200 mm long aluminium anodised barrel tower bolt extruded section and fixed complete all as specified and directed.

75

-

-

... More
S & F 100 mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and as directed.

80

-

-

... More
S & F 100 mm Butt hinges, extruded aluminium alloy, with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

20

-

-

... More
S & F 150mm (overall length of cover plate) size floor door stoper of brass body and tongues with hard drawn steel spring, fixed in bottom of door shutter complete all as specified and as directed.

10

-

-

... More
S & F floor door stoppers made out of aluminium alloy pressure die casting body and tongue with hard drawn steel wire spring, overall length of cover plate 150 mm, 4.5 mm thickness of cover plate, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996, fixed in floor complete all as specified and as directed.

20

-

-

... More
S&F galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised steel wire staples in window or door complete all as specified and as directed.

11.23

-

-

... More
S&F in repair galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised steel wire staples in window or door complete all as specified and as directed.

5

-

-

... More
S&F 150 mm long aluminium anodised barrel tower bolt extruded section and fixed complete all as specified and directed.

66

-

-

... More
S & F in repair 3mm thick plain sheet glass ordinary quality and glazing with beads and incl silicon in sqaures not exc 0.5 sqm in each pane fixed in metal frame incl hacking out old glass complete all as specified and directed.

10

-

-

... More
M&L for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators, Partition section with one or more rebates including fixing with necessary lugs, cleats, locking arrangement etc. including all accessories such as glazings clips, and rubber beadings for fixing glass panes in frame complete all as specified and directed. Note : (i) Glass panes/wiremesh shall be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading however it will be not be weighed and paid separately.

30

-

-

... More
M & L powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading, aluminium tower bolts 2 Nos in each door, screws top & bottom pivot/ hinges etc. complete all as specified and directed. (i) Glass panes/wiremesh shall be measured & paid separately . (ii) The quoted rate shall be inclusive of cost of rubber beading however it will be not be weighed and paid separately.

8.55

-

-

... More
M & L powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung type/fixed type/sliding/openable shutter frame without sash, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium fittings such as peg stays 150mm long 1 No, hinges type B-21, 100mm long (2 No) suitable handle 1 No and other necessary fittings complete all as specified and as directed

5.24

-

-

... More
M&L in repair for 09 mm thick prelaminated particle board interior grade, prelaminated both side with decorative choice lamination fixed with screw complete all as specified and directed.

2

-

-

... More
S&F sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed.

6

-

-

... More
M & L for neoprene beading requrired for for fixing loose or broken glass in window and door panel of any nature including taking down and fixing door and window panel in frame complete all as specified and directed. (Note : Glass will be measured and paid separately)

30

-

-

... More
S & F in repair sunscreen roller plated polyester window blind open and close verticaly or horizonatly with the help adjustment rope on tube (roller), made up of good fabric, plastic or other approved good material best locally available in market including all necessary assesories for installation and making good the surface compliete all as specified and directed by Engr-in-Charge

30

-

-

... More
S & F in repair Zebra pattern blinds made of polyester or other approved material for window /opening open and close verticaly with the help adjustment rope on tube (roller), made up of good fabric, plastic or other approved good material best locally available in market including all necessary assesories for installation and making good the surface compliete all as specified and directed by Engr-in-Charge

50

-

-

... More
Dismantling wrought iron or mild steel, including gates work of any description not otherwise provided for complete all as specified and directed.

1

-

-

... More
S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways;drainage crossings, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed

150

-

-

... More
S& F in repair Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed

5

-

-

... More
S&F in repair Door closer aluminium anodized extruded section body, hydraulically regulated designation No-3, universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and as directed.

10

-

-

... More
S&F in repairs PVC valveless, syphonic action type flushing cistern low level 10 ltr capacity white, with intel, ball valve, float and handle including brakects flushing, brakects flushing pipe complete all as specified & as directed.

10

-

-

... More
S & F in repair 500 Ltrs capacity rotational moulded polyethylene water storage tanks, white, triple layered (cylindrical vertical with closed top) hoisted and fixed in position & including all fittings such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc incl dismantling of old tank all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge.

4

-

-

... More
S & F in repair 1000 Ltrs capacity rotational moulded polyethylene water storage tanks, white, triple layered (cylindrical vertical with closed top) hoisted and fixed in position & including all fittings such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc incl dismantling of old tank all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge.

4

-

-

... More
S & F in repair 2000 Ltrs capacity rotational moulded polyethylene water storage tanks, white, triple layered (cylindrical vertical with closed top) hoisted and fixed in position & including all fittings such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc incl dismantling of old tank all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge.

1

-

-

... More
S&F in repair 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. Note : Minimum weight for 20 mm dia shall not be less than 210gms.

10

-

-

... More
S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified & as directed.

20

-

-

... More
S & F in repair vitreous china bowl type urinal flat back, size of 465 x 355 x 265 mm (minimum) white incl providing and fixing plugs, securing urinal to plugs with and including 60mm long brass screws with grating and union for discharge pipe including PVC waste pipe complete complete all as specified and directed.

5

-

-

... More
S & F vitreous china urinal, full stall type, white, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with grating and union for discharge pipe including PVC waste pipe and CP waste coupling complete all as specified and directed.

8

-

-

... More
S & F in repair vitreous china urinal, half stall type, white incl providing and fixing plugs, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with grating and union for discharge pipe including PVC waste pipe and CP waste coupling complete all as specified and directed.

4

-

-

... More
S&F in repairs vitreous china wash hand basin, white, flat back of size 550 X 400 X 140mm excluding taps, chain & plug and porcelene stopper but including brackets /fastners, 32mm dia brass chromium plated waste coupling and PVC waste pipe with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed cutting for and pinning in ends of brackets complete all as specified and directed.

5

-

-

... More
S&F in repair brass mortice lock, vertical type, size 65mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified fixed

5

-

-

... More
Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubish off the premises complete all as specified and directed.

175

-

-

... More
M&L for coloured jointfree non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed

20

-

-

... More
M&L for coloured glazed ceramic tiles 450mm X 350mm X 7 to 8mm thick on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed

50

-

-

... More
M&L for light shade full body vitrified ceramic tiles 8-10mm thick (square/rectangular) polished, double charged, area of each tiles exc 0.42 sqm but n exc 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as approved and directed.

40

-

-

... More
M&L for light shade full body vitrified ceramic tiles 8-10mm thick (square/rectangular) polished, area of each tiles n exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as approved and directed.

40

-

-

... More
M&L for light shade vitrified ceramic tiles 8-10mm thick (square/rectangular) polished, area of each tiles n exc 0.36 sqm, on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed

5

-

-

... More
M&L for coloured jointfree non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed

20

-

-

... More
S & F in repair plastic water closet seat cover, white/ivory colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device suitable for EWC complete all as specified and directed.

15

-

-

... More
M & L for haking out old broken toughenbed glasss fixed in structural glazing structure, steel, alumunium panel or other section any type etc complete all as specified and directed. Note : (Work will execute upto the height of G+ 4 story bldg outer side sturctural glazing area all necessary approaching, working and saftey kit are arrange by contractor and rate included in the rate)

13

-

-

... More
S & F 6mm thick laminated toughened glass coated with necessary film and fixed in structural glazing structure with necessary screw and fill the gap with silicon complete all as specified and directed. Note : (Work will execute upto the height of G+ 4 story bldg outer side sturctural glazing area all necessary approaching, working, scafolding and saftey kit are arrange by contractor and rate included in the rate)

5

-

-

... More
S&F 8mm thick frosted toughened glass for urinal partition including fixing accessories like SS Brackets, SS clamp Etc. complete all as specified and directed

4

-

-

... More
S&F 12m thick clear toughened glass in existing sturcutre fixing accessories like SS Brackets, SS clamp Etc. complete all as specified and directed

4

-

-

... More
M&L for taking out existing Automatic sliding glass door sensor (Dorma system), repairing, servicing and refixing in same position complete all as directed. Note : Servicing will be carried out through authorised rep of manufacturers only

5

-

-

... More
S & F in repair sensor of Dorma system automatic sliding glass door in existing door complete all as specified and directed

1

-

-

... More
S & F in repair big roller of Dorma system automatic sliding glass door in existing door complete all as specified and directed

10

-

-

... More
S & F in repair track profile of Dorma system automatic sliding glass door in existing door complete all as specified and directed

1

-

-

... More
S&F as in repair Chromium plated jet spray suitable for EWC complete all as specified and directed

5

-

-

... More
M & L for cladding of Dholpur stone tiles of size 200mm X 100mm X 15mm fixed on vertical surface (front, side, bottom & top ) fixed with neat cement slurry mixed with latricate adhesive including providing 8mm wide groove filled with latricate ahesive grouting complete. Note : (Work will execute upto the height of G+ 4 story bldg outer side cladding work area all necessary approaching, working, scafolding and saftey kit are arrange by contractor and rate included in the rate)

15

-

-

... More
M/Lfor Dholpur stone 20-25 mm thick cladding gang saw cut with machine cut edges, uniform colour of each stone any size fixed with CM 1:4 and stone adhessive chemical as per manufacturer instructions and including two number SS clamps (grade-202) of flat 30mm x 2mm, 150mm long with making T shape at edge for inserting in succeeding stone slab made to shape in each stone slab, making V groove at top and bottom of stone and drilling hole for 10M dia hold fastener including supply of SS fastner, polishing, rubbing & including silicon treatment with water repellent on surface complete all as specified and directed. Note : (Work will execute upto the height of G+ 3 story bldg outer side sturctural glazing area all necessary approaching, working, scafolding and saftey kit are arrange by contractor and rate included in the rate) including taking down old stones

10

-

-

... More
S & F as in repair 150mm long extruded Brass handles, fabricated type polished complete all as specified and directed

30

-

-

... More
S & F as in repair 200mm long extruded Brass handles, fabricated type polished complete all as specified and directed

30

-

-

... More
S & F as in repair 150mm long Brass barrel tower bolt with barrel of extruded section and rolled or cast bolt and fixed complete all as specified and directed

20

-

-

... More
S & F as in repair 200mm long Brass barrel tower bolt with barrel of extruded section and rolled or cast bolt and fixed complete all as specified and directed

20

-

-

... More
S&F as in repairs 300mm long Brass sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed

10

-

-

... More
S&F as in repair butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised size 100mm long ISI marked type B21 complete all as specified and directed

20

-

-

... More
S&F in repair floor door stopper of brass body and tongues with hard drawn steel spring, overall length cover plate 150mm long complete all as specified and directed

20

-

-

... More
S & F in repair floor door stoppers made out of aluminium alloy pressure die casting body and tongue with hard drawn steel wire spring, overall length of cover plate 150 mm, 4.5 mm thickness of cover plate, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996, fixed in floor complete all as specified and as directed.

20

-

-

... More
S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and connection to drain (or out going pipe) and to flushing pipe etc. incl trap set in cement concrete complete all as specified and directed.

3

-

-

... More
S&F in repair toilet paper holder with flat recessed chromium plated, stainless steel (SS-304 grade) with suitable fixing arrangements all as specified and directed.

5

-

-

... More
S&F in repair Towel ring of Stainless steel (SS-304 grade) fixed to walls with chromium plated (CP) brass screws, as per sample as directed by Engineer-in-.Charge

5

-

-

... More
S&F as in repair brass chromium plated tubular towel rail 20mm dia; 'D' type, 600mm long between flanges fixed to plug with chromium plated brass screws including wooden or plastic cleat complete all as specified and directed by Engineer-in-Charge.

5

-

-

... More
Dismantling wall and ceiling board (fibre pulp, insulation etc) or insulation board/ slab/blankets any thicknesss including cover filletes complete all as specified and directed

130

-

-

... More
Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System with Dune Tegular 24 Edge Tiles of 16mm thickness and Prelude 24mm face exposed grid. The tiles shall have sand texture visual with acoustical punchers, Humidity Resistance (RH) of 99%, NRC 0.5 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, CAC of 33db as per ASTM E1414, Light Reflectance ≥85% as per ASTM E-1477, Thermal Conductivity k = 0.052 - 0.057 W/mK, Colour Global White, Fire Performance of class 0/1 as per BS 476 Part 6/7 and Class A as per ASTM E84 with Board edge in module size of 600 x 600mm. It shall be suitable for Green Building application, with Recycled content of up to 41%. The tile shall comply with Indoor Air Comfort Gold requirements, version 7.0 (2020) and this certification shall ensure compliance with LEED & DGNB, French VOC class A+, French HQE certification, German Regulation (AgBB/ABG), Italian CAM Edilizia, BREEAM International NOR NL, WELL Building, SKA Rating, BVB (Sweden), Eco Product Norway, Blue Angel DE-UZ 132, M1, Danish Indoor Climate Label, Singapore Green Label and GreenTag Australia. The tile shall have certifications from GRIHA and GreenPro thereby confirming that it is an environment friendly product. SUSPENSION: The tile shall be laid on KCS Prelude 38 with 24 mm wide T - section flanges colour global white (matching to tile colour) having roll formed double stroke rotary stitching on all T sections i.e., the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm (all sections). The deflection loading of the system shall be 15 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 18kg/m. The end details of the cross tee shall be made of pre hardened steel and fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull-out strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel of 90 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability. INSTALLATION: To comprise main runner spaced at 1200mm securely fixed to the structural soffit using suspension system (specifications above) at 1200mm maximum. The First/Last suspension system at the end of each main runner shall not be greater than 450mm from the adjacent wall along with the first and the last main beam shall be at less than 600mm from the wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be KCS wall angles of size 3000x19x19mm, secured to walls using screws at 450mm centre to centre maximum. Installation shall be carried out as per recommended procedure. SUSPENSION SYSTEM accessories supplied by consisting of M6 Anchor Fasteners with hanger hole, pre-straightened hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs. (Optionally, adjustable hook clips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for level adjustment during installation purpose in main runners).

50

-

-

... More
,---ditto--- all as per item No. 115 above but except grid frame and hanger complete all as specifie and directed.

100

-

-

... More
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed

10

-

-

... More
S&F in repair 8mm thick ceiling boards with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm existing grid including taking down old ceiling tiles/boards from existing grid complete all as specified and as dircted.

80

-

-

... More
S&F for 8mm thick ceiling boards with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid including Anodised aluminium snap grid frame with hanging arrangements of hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long incl taking down old false ceiling and grid frame work and hangers complete all as specified work for false ceiling complete all as specified

80

-

-

... More
S&F in repair flushing system kit incl syphon and handle suitable for one Piece floor/ wall mounted water closet in built twin flushing cistern complete all as specified and directed.

15

-

-

... More
S&F in repair electronic flushing system kits of make cera / RAK or equivalent as approved by GE complete incl sensor, replacement of sonat valve, I, battery box with 4 No1.5 Volt AA Duracell for integrated urinal pot of any make as per site complete all as specified and directed. Note : The replacement and repair of sensor will be done through authorised dealor/agent of of the company.

11

-

-

... More
S&F in repair vitreous China sensor based urinals with integrated EFS (electronic flushing system)technology of minimum size 360 x 330 x 740 mm complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, including waste pipe and couplings and connection etc complete all as specified and directed.

5

-

-

... More
S & F 18 mm thick HDHMR (High density high moisture resistant) board approved make with one side white laminate and other side decorative as in kitchen cabinets fixed with minifix hardware where ever required including edge band 22 mm wide 0.80 m thick of matching colour on exposed surfaces of board fixed with polymaster adhessive of approved make including trimming edges of edge band to true line of thicknesss of board by manual trimmer complete all as directed

20

-

-

... More
S & F auto close hinges, stainless steel of grade SS-304, bright finish and fixed complete all as specified. Make : Godrej, Hindware, Lifetime, Hettich or equivalent

120

-

-

... More
S & F stainless steel handles of size 100 mm fancy type of approved make and fixed complete all as specified & directed. Make : Godrej, Hindware, Lifetime or equivalen

60

-

-

... More
M & L for reparing seepage, blockage in drainage line inside bldg area above or below the floor including necessary reparing asseccories like floor trap, bend, tee, jointing mtrl m-seal, white & black cement etc and making the drain line running all as specified and directed. Note : Work will executed upto G+4 story building, all necessary scaffolding and saftey tool of labour will provided by contractor rate included.

50

-

-

... More
S&F in repair 15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or laid in floor including taking down old tubing complete all as specified and directed.

20

-

-

... More
S&F in repair 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or laid in floor including taking down old tubing complete all as specified and directed.

10

-

-

... More
S&F in repair 25 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or laid in floor including taking down old tubing complete all as specified and directed.

20

-

-

... More
S & F in repair 15mm bore pillar tap, long body cast copper alloy, chromium plated, fancy type with capstan head, screwed down, high pressure with or without lettered 'Hot' or ' Cold' with long screwed shank and fly nuts screwed for iron pipe complete all as specified and directed.

10

-

-

... More
S&F in repair 15 mm bore two way bib tap, cast copper alloy chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed incl health faucet with flexible tube & Hooks incl making connection complete all as specified and directed.

6

-

-

... More
S&F in repair 15 mm angle/stop valve, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed for iron pipe or for unions complete all as specified and directed.

25

-

-

... More
S&F in repairs vitreous China white single piece EWC (European type) of size 750mm x360mm x660mm incl inbuilt dual flush flushing cistern, S trap and soft close seat cover and mild steel chromium plated or aluminised hinging device and connection to drain (or out going pipe) all as specified and directed.

6

-

-

... More
S & F as in repair vitreous china, counter top oval shaped wash hand basin, white, of size 560mm x 450mm, including 32 mm dia PVC waste pipe, 32mm dia PTMT waste coupling half or full thread (minimum wt 45 grms) flange end bedded in red lead cement & other end fixed to waste pipe complete all as specified and as directed.

10

-

-

... More
M & L in repair with preparation of old surface clean, dry, sound and free from dust, grease and loose particles and damaged edges should be repair with mortar like MonoTop of Sika or equivalent in Fosroc, STP etc including Supply and installation of Backer rod of polyurathene foan to manage depth of filling with Backer Rod of Sika or equivalent in Fosroc, STP etc and application of primer for porous concrete with Primer-210 of Sika or equivalent in Fosroc, STP etc. After completion of above process the crumple joint of bldg at (Colunm, beam, slab etc) shall be treartment/ Filled with high performance compressible expension Polyurathene sealant with (+/-) 35 movement capacity, low VOC emissions, bubble free curing with SikaFlex Pro-3 or equivalent in Fosroc, STP etc for any depth and any width of joints etc and including placing of new alumuminum sheet of 200mm width plain with self taping screw upto the height of bldg upto 25 mtr all Necessary scaffolding and saftey equipments (Self taping price included) including taking down old crumple sheet and treatment complete all as specified by Egnr-in-Charge. Note : The work shall be carried out through company authorised applicators only.

50

-

-

... More
S&F in repairs 15 mm bore bib tap, fancy type, chromium plated cast copper alloy with cruth or butter fly handle, long body, screwed down, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

15

-

-

... More
S&F in repair 75 mm bore UPVC (SWR) drainage pipes (type B conforming to IS-13592) single socketed in any length with rubber ring joints laid in trenches or floors complete all as specified & directed.

10

-

-

... More
S&F in repair 110 mm UPVC(SWR) ventilation and rain water pipes (type A conforming to IS-13592) single socketed, in any length with rubber ring joints fixed to wallls with suitable size clamp complete all as specified & directed.

15

-

-

... More
S&F in repair 150 mm bore UPVC (SWR) drainage pipes (type B conforming to IS-13592) single socketed in any length with rubber ring joints fixed to wallls with suitable size clamp incl taking down old complete all as specified & directed.

20

-

-

... More
S&F 75 mm dia PVC (SWR) bends, tee, socket etc any radius complete all as specified and directed.

8

-

-

... More
S&F 110 mm dia PVC (SWR) bends, tee, socket etc any radius complete all as specified and directed.

8

-

-

... More
S&F 150 mm dia PVC (SWR) bends, tee, socket etc any radius complete all as specified and directed.

6

-

-

... More
S&F in repair Health faucet (ABS Body) brass chromium plated suitable for 15 mm dia pipe with 8mm dia, 1.50 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.

20

-

-

... More
S&F 5 mm size of spcified thickness looking mirror, each mirror size exceeding 0.50 Sqm each, bevelled edge of selected quality glass fixed with diamond shape headed decorative type Stainless screws to wall and PVC plugs complete all as specified and as directed

5

-

-

... More
S&F Hollow PVC Wall Lining (Panelling) consisting of 5-7mm thick coloured or textured PVC sheet fixed to PVC fillet frame with screws inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing including refixing all fittings on surface after panelling work complete all as specified and directed Note : PVC frame/grid shall be paid and measured separately.

150

-

-

... More
S& F in repair GI channel of size 20mm x10mm and 1mm thick for making grid frame for wall paneling work fixed to wall with screws incl PVC gitty (plug) complete as specified and directed by Engineer-in-Charge

100

-

-

... More
M&L for solar control film 25micron reflective type sticked to glass panes as per instruction of manufaturer complete all as specified and as directed by Engineer in Charge.

20

-

-

... More
M&L for Water proofing tratment to existing roof/terrace using Single component, acrylic based, flexible, micro fibre reinforced waterproofing and heat reflective coating system including taking down old roof treatment. The treatment shall be carried out as per the manufacturers instructions and shall include. (a) Preparation of substrate and cleaning it off all loose and triable by mechanical means (b) application of primer coat @ 0.2 to 0.3 kg/ sqm followed by the first coat @ 0.75kg/ Sqm. (c) The second coat shall be applied @ 0.75 kg / Sqm and reinforced with fabric re-inforcement between the first and second coat. (d) The top coat of primer shall be applied after the second coat dries off @ 0.05-0.08 Kg per Sqm. (e) The material shall adhere to following specification. TECHNICAL SPECIFICATION OF MATERIAL Tensile Strength 1.5 MPa ASTM D412 Elongation at Break > 200% ASTM D412 Adhesion in Peel > 1.5 MPa (on concrete substrate) EN 1542 Crack Bridging Ability Passes upto 3.2mm Width ASTM C1305 Permeability to Water Vapour Passes IS 2645 Water Vapour Transimission ~ 23 g/m²/24hr ASTM E96 Water Absorption < 10% ( by Mass) ASTM D570 Microbiological Resistance No Algae & Fungal Growth ASTM D5590 Solar Reflectance Index 102 ASTM E1980. Make : Berger- Roof Kool & Seal, Asian-Damp Proof Ultra, Pidilite-Roof Seal Ultra, STP- ShaliUrethane BTD plus Note : 1. Complete material shall be procured in bulk and kept in lock and key. 2. The installation company should be trained and authorized by Manufacturer & installation to be carried out as per manufacturers approved method statement. All auxiliary & accessories involved during application should be supplied by single manufacturer

160

-

-

... More
M&L for preparation of old surface by cleaning / opening all visible cracks in V shape, cleaning properly with wire brushes, washed and filling with crack seal liquid component grouted by nozzles carefully as per direction of authorised applicators carefully as per manufacturers instruction complete all as specified and directed. Note : Work shall be carried out by company Autorised applicators only.

200

-

-

... More
Disconnecting existing tank of capacity exc 500 and not exc 1000 litre, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required, reconnecting and re-fixing in position including cleaning and removing all scale and dirt etc from service tanks and from mouths of circulating pipe etc, date of cleaning also mentioned on tank by synthetic enamel paint complete all as specified and directed. Note : Cleaning etc shall be included under this item only

30

-

-

... More
Disconnecting existing tank of capacity exc 1000 and not exc 2000 litre, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required, reconnecting and re-fixing in position including cleaning and removing all scale and dirt etc from service tanks and from mouths of circulating pipe etc, date of cleaning also mentioned on tank by synthetic enamel paint complete all as specified and directed. Note : Cleaning etc shall be included under this item only

4

-

-

... More
Disconnecting existing tank of capacity n.exc 500 litre, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required, reconnecting and re-fixing in position including cleaning and removing all scale and dirt etc from service tanks and from mouths of circulating pipe etc, date of cleaning also mentioned on tank by synthetic enamel paint complete all as specified and directed. Note : Cleaning etc shall be included under this item only

15

-

-

... More
M&L for cleaning of RCC over head tank of capacity exc 15000 ltr and n exc 30000 ltr by scrapping the floor and wall surfaces, removing the all scale and dirt, cleaning with chemical and washing with clean water, mention date of cleaning on the tank by shethitic enamel paint complete all as specified and directed. Note : (i) All saftey precaution like oxygen cylinder, ladder, head light cap, wire brush, glubbes and mask etc will be provided by cotractor for labour during the time of cleaning and shall be included in quoted rates

3

-

-

... More
S&F in repair 15 mm dia Push type (Self closing type) bib tap, fancy type, cast copper alloy, Chromium plated, screwed down for iron pipe or for brass ferrule complete all as specified and directed.

20

-

-

... More
M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

1

-

-

... More
M&L for 100mm thick plain cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

50

-

-

... More
M&L for 25mm thick PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in flooring and all other similar works finished even and fair complete all as specified and directed.

50

-

-

... More
M&L taking down existing 12mm thick toughened glass as in window, door, Partition wall including all type carving lining work and refixing the same including new fittings etc & required to fix the toughened glass complete all as specified and directed.

10

-

-

... More
M&L taking down existing aluminium door shutter any description, size and type from frame & refixing the same after necessary adjustments and repair, change of rubber neoprene packing, changing hinnges, beadings and other connected items and making it serviceable complete all as specified and directed.

15

-

-

... More
NOTES FOR WORKING ABOVE 3.5M HEIGHT:- SCAFFOLDING & SAFETY PRECAUTIONS 1. The painting/repair work shall be carried out by using proper scaffolding. No zoola is permitted for the work under any circumstances. Suitable scaffolds shall be provided for workmen. 2 Scaffolding or staging more than 3.5 Meters above the ground or floor, swung or suspended from any overhead support or erected with stationery support shall have a guard rail properly attached, braced and otherwise secured at least 1 meter high above the floor or platform of such scaffolding or staging and extending along the entire length of the outside and ends thereof with only such openings as may be necessary for the delivery of materials. Such scaffolding or staging shall be so fastened as to pervent it from swaying form the building or structure. 3 Every opening in the floor of a building or in a working platform be provided with suitable means to prevent the fall of persons or materials by providing suitable fencing or railing whose minimum height shall be 1 metre. 4 Safe means of access shall be provided to all working platforms and other working places. 5 The rates quoted are deemed to include the above provision of scaffolding and no extra will be payable to contractor on this account. The scaffoldings shall be removed only after obtaining clearance of Engineer-in-Charge / Garrison Engineer after considering the quality of the work undertaken on completion of the painting. 6 . Contractor shall take all safety precautions for the labour engaged for this work. All labour shall be provided with safety belts, helmets, Nose screens etc and the contractor shall adhere to all safety precautions as per Labour Welfare Act. 7. It is also advised, contractor to have insurance cover for his workmen working at heights against any eventuality from any reputed insurance agencies. Department will not be responsible for any untoward incident happening due to lack of safety precautions taken by contractor. 8. The Rate of all above provisions shall to be included in the quoted rated. Nothing extra shall be paid to contractor.

-

-

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.