Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Special Repair To Living In Airmen Billets At Af Stn Uttarlai in Barmer, Rajasthan, with an estimated contract value of Rs. 45,97,000. The bid opening date for this tender is 23-10-2026 and the last date for bid submission is 21-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - Rajasthan Tender

Opening Date23 Oct 2026
Closing Soon21 Nov 2026
Tender Amount₹ 45,97,000 
Notes
Download

Costs

Description

Special Repair To Living In Airmen Billets At Af Stn Uttarlai

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed by Engr-in-charge.

82.35

10

-

... More
M&L for 18-20mm thick granite (of any type) work, table rubbed mirror and polished as in steps, jambs, pillars, window- cills, cooking platforms and like bedded over and including 20mm thick screed bed in CM (1:4) and pointing in white cement (1:2) using marble dust with admisture of pigment to match with shade of granite complete all as specified and directed by Engr-in-charge.

32.4

10

-

... More
M&L for pre-polished machine cut Kota stone single piece as in stair case tread, riser & skriting 20-25mm thick laid over 20mm thick screed bed in CM (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, bull noseing etc complete all as specified and directed by Engr-in-charge. Note : Single stone piece on tread & riser with nosing one side shall be provided.

14.85

10

-

... More
M&L for 20-25 mm thick mirror polished machine cut kota stone as in flooring, skriting and simiar work over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and including 20 mm thick screed bed in cement mortar (1:6) complete all as specified and directed by Engr-in-charge.

761.3

10

-

... More
Ditto all as per item 7 above but except kota stone. complete all as specified and directed by Engr-in-charge.

15

10

-

... More
M&L for mirror polishing on existing kota stone flooring using mechanical type kota stone polishing machine to give high gloss finish including all type of grinding blade/beat & wax polish. Complete all as directed by Engr-in-charge.

260.52

10

-

... More
Demolition of cement concrete reinforced of any descrition and in any position not otherwise specifially provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed by Engr-in-charge.

0.25

10

-

... More
S&F of precast cement concrete type B1 1:2:4 (20mm graded aggregate, with reinforced as required) as in baluster, apex stones, pier caps, columns , posts of balcony and similar work set in cement mortar 1:4 and finish smooth with using putty and two coats of weather. complete all as specified and directed by Engr-in-charge.

0.25

10

-

... More
Dismantaling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

436.48

10

-

... More
M&L for glazed ceramic tiles size 300 X 450 X 7-8mm thick on vertical surface over 10mm thick rendering in CM (1:4) as in dado/skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured complete all as specified and directed by Engr-in-charge.

436.48

10

-

... More
M&L for PCC 1:5:10 (Brick coarse aggregate) filling as in sunken floor / sub base of flooring and similar work including demolition of existing sunkun floor and similar work. Complete all as specified and directed.

14.88

10

-

... More
M&L rendering 15mm thick in CM 1:3 on brick work or concrete surfaces, mixed with integral water proofing compound as per manufactures instructions, finished the surface even and smooth without using extra cement and applying evenly a tack coat of blown bitumen 85/25 @ 1.2 Kg/Sqm over a coat of water based bitumen emulsion primer at the rate of 0.30 ltr/Sqm including cleaning the surfaces thoroughly from dust and dirt and lay water proofing treatment with felt having glass fiber non woven reinforcement and weighing 3.0 Kgs/Sqm to 4.0 Kgs/Sqm in 100mm overlaps both longitudinally and transversely by torch bonding and applying a coat of blown bitumen 85/25 @ 1.2 Kgs/Sqm on top of felt on surface (bottom and vertical) as in sunken floor and similar work. complete all as specified and directed by Engr-in-charge. (Note : Supply of water proofing compound will be measured and paid separately .)

72

10

-

... More
S&F in repair High density polyethylene pipe (HDPE) 40mm bore of pressure rating 6kg/cm2 fixed to wall, ceiling or laid in floor etc complete all as specified and directed.

8

10

-

... More
Supply only integral water proofing compound.

364.33

10

-

... More
Taking down existing roof treatment any thickness including plastering, leaping plaster of any thickness cuting & up rooting tree roots/Vegitation growth & removing the debris from the premises out side from the MOD land including cleaning/washing down and keeping surfaces clean complete all as specified and directed by Engr-in-charge.

913.68

10

-

... More
M&L for PCC 1:1.5:3 Nominal mix concrete type A1 ( Using 20mm graded aggregate) as in lavel course on roof, roof flooring, mass concrete and similar work, finish even and smooth without using extra cement. complete all as specified and directed.

22.84

10

-

... More
M & L for 10 mm thick screed bed in cement mortar 1:4 complete mixed with water proofing compound as per manufacturer instructions over roof top surface finished even and smooth using extra cement and application of water proofing treatment using APP modified roof membrane over existing accessible RCC roof slab / chajja / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying bitumen primer/tack coat of in dustrial bitumen 85/25 at the rate of 1.20kg/Sqm by the same agency as that of APP membrane. (c) Laying of APP based polymeric membrane minium weight 3kg/Sqm and miniume 3mm thick reinforced with polyster non wove fabric (Wt not less than 150 gms/sqm) land on primed surface by forced application using butane torch by torch application with 100mm side laps and 150mm end lap. (d) one coat of aluminium paint over a coat of primer apply on top surface of APP. (Note:- WPC shall be measured and paid separately)

913.68

10

-

... More
M&L for 75mm thick cement concrete (1:3:6) type C2 using 20mm graded stone aggregate as in paving/plinth protection in bitumen filler/mastic filling Complete all as specified and directed by Engineer-in-Charge.

142.5

10

-

... More
Taking down cement plaster of any description on bricks, concrete or stone walls etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

710

10

-

... More
M/L rendering 15mm thick on concrete surface or brick work in CM 1:6 finished even and smooth with out using extra cement similar work up to G+1 height of the bldg. all as specified and directed.

250

10

-

... More
M&L for rendering 10mm thick in CM (1:6) on walls, finishing even and smooth without using extra cement similar work .complete all as specified and directed by Engr-in-charge.

310

10

-

... More
M&L for rendering 5mm thick in CM (1:3) on concrete surface such as roof projection, chajja, fin & ceiling and similar work up to G+1 height of the bldg, finishing even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

150

10

-

... More
M&L two coats of oil bound distemper on newly plastered wall surfaces including preparation of surface and providing 1.5mm thick wall care putty complete all as specified and directed by Engr-in-charge.

310

10

-

... More
M & L for prepration of newly plastered external surfaces of wall and for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, anti fungal emulsion paint of approved brand and shade over one coat of alkali primer all as per manufacturs instructions incl necessary scaffolding writing letters etc complete all as specified and directed by Engr-in-charge.

250

10

-

... More
Prepration on new plastered or unplastered ceiling surface and applying three coat of white wash up to G+1 height of the bldg. complete all as specified & directed by Engineer-in-Charge

150

10

-

... More
Taking down frames with shutters (without taking off shutters from the frame ) area not exc 1.5 Sqm Each incl iron mangery complete.

124

10

-

... More
S&F powder coated aluminium window with shutter , the size of outer frame three track 100 x 37x 1.50mm thick ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm thick and glazing with 5 mm thick Transparency glass of poly carbone including all-around suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers’s sliding rollers of nylon with including powder coated aluminium grill and all necessary fittings complete all as specified and directed by Engr-in-charge.

28.8

10

-

... More
S&F fixed type powder coated aluminium ventilators with provision of bottom panel in fixed glazing of 3mm thick tinted glass and top shutter shall be provided with 2 nos aluminum 75mm long hinge at upper side with 3mm thick sheet glass including 4 mm dia stainless steel 2 Nos stay, Powder coated tower bolt 100mm long 1 Nos, Powder coated aluminium grill with aluminium chanel including 0.36mm dia stainless steel wire cloth and average aperture 1.4mm and all necessary fittings arrangement complete using aluminium section 100x44.45x1.5mm thick etc in frame complete all as specified and directed by Engr-in-charge.

9.6

10

-

... More
S&F powder coated aluminium window with upper panel shutter shall be openable inclding aluminium powder coated guard bar and fix type stainless steel wire mess and provision of 02 Nos glass shutter openable at lower portion of window for cooler provision , shall be provided with 4 nos aluminum 75mm long hinge with 5mm thick tinted/plain sheet glass 4 Nos powder coated tower bolt 100mm long all necessary fittings arrangement complete using aluminium frame section of window 63.5x38x1.5mm thick and shutter frame section 37x18x1.2mm etc complete all as specified and directed by Engr-in-charge.

57.6

10

-

... More
S&F PVC moulded door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing all as directed

150.4

10

-

... More
Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.

41.6

10

-

... More
S&F Butt hinges, 100 mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised .

192

10

-

... More
S& F 200 mm long, aluminum anodised barrel tower bolts of extruded section complete as specified.

128

10

-

... More
S&F 150mm long aluminum alloy handles fabricated type, anodized complete as specified.

148

10

-

... More
Taking down frames with shutters (without taking off shutters from the frame ) area exc 1.5 Sqm but n.exc 4 sqm mtr Each incl iron mangery complete.

5

10

-

... More
Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each .Complete all as spcified.

2

10

-

... More
S&F 105 x 60mm pressed steel frames for doors with one or more rebate including necessary fixing lugs, hinges lock strike plate etc complete as specified including a coat of shop coat zinc chrome primer complete all as specified.

10.8

10

-

... More
S&F 125 x 60mm pressed steel frames for doors with one or more rebate including necessary fixing lugs, hinges lock strike plate etc complete as specified including a coat of shop coat zinc chrome primer complete all as specified.

16.2

10

-

... More
S&F for framed work such as rolled mild steel joist, channel, angle, tee section fixed independently, without connecting plates etc (cut to ordinary lengths ) use in framed work, railing work, grill, gratings, cupboard shutter, etc with ends of bars shouldered and/or riveted or forged in to spikes, framed guard bars, barred iron doors ladders framed balusters, cooler stand and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed by Engr-in-charge.

150

10

-

... More
S&F factory made 2nd class HW 35mm thick panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated on both sides. complete all as specified & directed by Engineer-in-Charge.

12.08

10

-

... More
S&F factory made 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) , edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauze etc, sizes of members of shutters as specified in SSR Part I. (2nd class hard wood). complete all as specified & directed by Engineer-in-Charge

7.25

10

-

... More
S&F galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm. complete all as specified and directed.

4.71

10

-

... More
S&F 100mm butt hinges, medium weight, cold rolled mild steel and fixed.

48

10

-

... More
S&F 300mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts and sliding bolts of extruded sections or cast-aluminium alloy. complete all as specified and directed.

5

10

-

... More
S&F floor door stoper (140mm length) of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed to door complete. complete all as specified and directed.

16

10

-

... More
S&F 300 mm ordinary MS rat rail rod pattern spring including roller and roller plate complete

6

10

-

... More
M&L for preparation of new or untreated wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of primer and over one coat of wood putty, complete all as specified and directed.

42.99

10

-

... More
M&L for preparation of new or untreated steel surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of primer , complete all as specified and directed.

25

10

-

... More
M&L in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and awerage width of aperture 1.18 mm and fixed with tinned tacks

60

10

-

... More
Running welding exc 6mm but not exc 9mm (Thickness of metal to be welded), complete all as specified and directed.

2

10

-

... More
S&F in repair Rotational moulded 3 layers polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl all fitting such as tank nipple/GI fitting incl PTMT float/ball valves 20 mm dia high pressure with epoxy coated aluminium rod and high denscity plastic ball screwed for iron pipes (Min weight 210 gms)and fixed to iron pipes etc. all as specified in SSR Part I for 500 ltrs capacity incl dismantling of old tank.complete all as specified and directed by Engr-in-charge.

2

10

-

... More
Dismantling of cast iron or reinforced concrete drain pipes/PVC pipe 100/75mm dia and under any type, jointed in cement mortar and taking out of trenches if required .

73.6

10

-

... More
S&F CI soil waste vent and rain water pipe 75 mm bore (ISI Marked) in any length with or without ears with cement joint laid in floor/fixed to wall complete all as specified and directed.

24

10

-

... More
S&F CI soil waste vent and rain water pipe 100 mm bore (ISI Marked) in any length with or without ears with cement joint laid in floor/fixed to wall complete all as specified and directed.

49.6

10

-

... More
S&F in repair cast iron floor trap 75 mm outlet dia with grating including jointing to waste pipe fixed in cement concrete type B1, (1:2:4) complete all as specified and directed.

32

10

-

... More
S&F 100mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches.

16

10

-

... More
S&F 75mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches.

16

10

-

... More
S&F 100mm bore bend (any radius) with duck foot or heel rest.

8

10

-

... More
S&F 75mm bore bend (any radius) with duck foot or heel rest.

8

10

-

... More
M&L for 15 mm bore GI tubing, medium grade with all fittings and fixed complete to walls with clamps, ceiling, floors or laid in trenches, concealed to wall/open to wall incl taking down old pipe. complete all as specified and directed by Engr-in-charge.

184

10

-

... More
M&L for 20 mm bore GI tubing, medium grade with all fittings and fixed complete to walls with clamps, ceiling, floors or laid in trenches with concealed to wall/open to wall, under culvert /road crossing etc incl taking down old pipe. complete all as specified and directed by Engr-in-charge.

306

10

-

... More
M&L for 25 mm bore GI tubing, medium grade with all fittings and fixed complete to walls with clamps, ceiling, floors or laid in trenches incl taking down old pipe.complete all as specified and directed by Engr-in-charge.

25

10

-

... More
S&F in repairs 20 mm bore Gun metal, globe, gate valves/Ball valve high pressure with polythene float and fly nut complete screwed for iron pipe or for unions. complete all as specified and directed by Engr-in-charge.

16

10

-

... More
S&F in repair Vitreous china ware wash down water closet pan, (pedestal pattern) coloured including connection to drain and to flushing pipe, anti syphonage pipe etc.

16

10

-

... More
S&F in repairs vitreous china wash hand basin, angle back, size 550x400mm white excluding taps, waste, chain and plug and porcelain stopper including brackets, complete all as specified and directed.complete all as specified and directed by Engr-in-charge.

16

10

-

... More
S&F in repair 600mm X 450mm (5 mm thick) looking mirror decorative type beading of any size of standard quality bevelled edge mounted on 6 mm thick ply wood and fixed with rubber plugs, screws, cup washers, complete all as specified and directed.

16

10

-

... More
S&F in repair PVC low level fushing cistern 10 liters capacity including 32mm dia PVC down pipe,brackets etc complete all as specified and directed by Engineer-in-Charge.

16

10

-

... More
S&F in repair chromium plated long body swan neck pillar tap 15 mm dia cast copper alloy with capstan head , screwed down high presure with or with out lettered fixed with iron pipe, complete all as specified and directed by Engr-in-charge.

16

10

-

... More
S & F in repair angle/stop valves cast copper alloy chromium plated with long shank , screwed both ends for iron pipe 15mm bore, complete all as specified and directed by Engr-in-charge.

64

10

-

... More
S&F in repair Chromium Plated wall mixer for mixing Hot & cold water screwed down for iron pipe 15mm bore complete all as specified and directed by Engr-in-charge.

16

10

-

... More
S & F in repair CP bib taps (long body) cast copper alloy with crutch or butter fly handle screwed for iron pipe of dia 15mm fixed, complete all as specified and directed by Engr-in-charge.

32

10

-

... More
S&F in repair brass chromium plated shower rose with swivel joint 125mm size in square with CP long shank arm including fixing to steel pipe or union complete all as specified and as directed.

16

10

-

... More
S&F in repair 15mm bore stainless steel CP Health faucet of standared quality and make with high density chromium plated flexible pipe of minimum length 1.50 mtr complete all as specified and directed.

16

10

-

... More
S&F of SS Peg stey 6 of set fabricated on SS plate 1mm thick as per sample approved by Engineer-in-Charge.

32

10

-

... More
S&F in repair Chromium plated Towel rail with towel racks of 600mm long of fixed with & including CP brass screws & wooden/plastic cleats (min. weight 190 gms) complete all as specified and directed by Engr-in-charge.

16

10

-

... More
S & F in repair glass shelf assembly consisting of 5.5mm thick glass shelf 150mm wide & 600mm long with chromium plated bracket guard incl Stainless steel 100mm long bracket (one Pair).complete all as specified and directed by Engr-in-charge.

16

10

-

... More
M&L for 25mm dia stainless steel curtain rod wall thickness 0.9 mm with brackets and knobs at both ends as per site requirement including taking down old existing conduit pipe with accessories complete all as specified and directed by Engr-in-charge. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.

144

10

-

... More
S&F in repair 32/40 mm CP waste coupling (half or full threaded) (Min weight 45 to 60 gms) all as specified and directed.

16

10

-

... More
S&F in repairs 32/40 mm dia PVC waste pipe for sink and wash hand basin of pressure rating 10 kgf/Sqm complete all as specified and as directed.

16

10

-

... More
S&F in repairs PVC connection 15mm dia and 600mm long with two Nos of PTMT checknuts and washers complete. All as directed by Engr-in-charge.

32

10

-

... More
M & L for complete removal of existing treatment on walls including preparing surface and applying two coats of oil bound distemper with 1.5 mm thick wall care putty to make smooth surface incl all as specified and directed by Engr-in- charge

1090

10

-

... More
M & L for complete removal of existing treatment of old external surfaces of wall and for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces anti fungal emulsion paint of approved brand and shade over one coat of alkali primer , all as per manufacturs instructions incl necessary scaffolding writing letters etc complete all as specified and directed by Engr-in-charge.

500

10

-

... More
M&L complete removal of existing treatment of wall surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and effloescent salts and trading oil and greasy spots and applying two coat of white wash up to G+1 height of the bldg . complete all as specified and directed by Engr-in-charge.

70

10

-

... More
M&L preparation of old surface of Ceiling including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and effloescent salts and trading oil and greasy spots and applying one coat of white wash up to G+1 height of the bldg . complete all as specified and directed.

540

10

-

... More
M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed by Engr-in-charge.

150

10

-

... More
M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed by Engr-in-charge.

250

10

-

... More
M&L for scraping out loose motar/concrete by chiseling/ wire brushing complete on ceiling, column/beam, roof projection and applying rust removing solution (rebaklene soulution) to exposed corroded reinforcement and applying a coat of epoxy primer (Nitozink primer from M/S Fosroc or equivalent as approved by GE) as per manufacture instructions providing and fixing of wire mesh of weight 2.5 Kg per Sqm and apply 25mm average thickness in CM (1:4) mixed with liquid integral water proofing compound (complast 'X' recommended by the manufacture with gunitting machine at a pressure not less than 5Kg/Sqcm finally rendering 10mm thick plaster in CM (1:4) using liquid integral water proofing compound up to G+1 buld(complast 'X' 421 from M/S Fosroc and nitobound AR from M/S Fosroc or equivalent as approved by GE) in the proportion recommended by the manfacture complete all as specifed and directed. Make: Fosroc or equivalent in Dr Fixit/ACC/ L&T/STP/Bostik/Sika/ BASF/Choksey chemicals/ Thermax ltd/ Hindcon chemicals . Note : The rate quoted shall be inclusive of all chemicals, wiremesh etc. as specified above.

350

10

-

... More
M&L TMT bars 10mm dia and over, cut to length and bent to shape as directed with and including cutting out of old rusted reinforcement, welding of new reinforcement complete all as specifed and directed

46

10

-

... More
M & L for preparation of surface and applying damp proof(Dr. Fixit new grade 603/New coat paint to prevent moisture from penetrating walls and other surfaces,primarily addressing rising damp and soil moisture complete all as specified and directed by Engr-In-Charge. Make- Dr. Fixit new grade 603/New coat paint or equivalent.

110

10

-

... More
M&L for 75mm thick PCC 1:4:8 type D-2(using 40mm graded aggr) as in sub base.complete all as specified and directed.

40

10

-

... More
Provding and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour design & pattern as in footpath parks lowns drive ways or light traffic parking etc of requied strength, thickness & size shape, made by table vibratory mathod using PU monld, laid in required clolur & pattern over and inclding 50mm thick compacted bed fine sand compacting and proper embeddiing /laying of inter locking paver balocks into the sand bedding layer through vibratry compacton by using plate vibrator filling the joints with sand and cutting of paver blocks as per requird size and pattern finishing and sweeping extra sand.Complete all as specified and directed. .

40

10

-

... More
Provding and laying at or near ground lavel foctory made kerb stone of M-25 grade cement concrete in position to the requied line, line, level and corvture jointed with cement mortar 1:3 including making joints with or without grooves (thickness of joints except at sharp curve shapp not to more than 5mm) incl making drainage openign wherver required complete..Complete all as specified and directed. .

0.72

10

-

... More
M&L for preparation of new or untreated concrete surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of primer , complete all as specified and directed.

3.2

10

-

... More
Excavating in trenches in any type of soil, n.exc. 1.5m wide and n.exc. 1.5 m in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n.exc. 10 sqm on plan and n.exc 1.5m in depth and getting out.

26.11

10

-

... More
Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm.

30.79

10

-

... More
Removing excavated material (soil) n.exc. 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point.

14.83

10

-

... More
Demolition and breaking up drain pipes, (Salt glazed stoneware, AC or reinforced concrete) upto & incl 150mm (internal dia) set in cement mortar.

68

10

-

... More
M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in bed to drain pipes of size 150 mm bore, including packing under & haunching against the sides of pipes after they are laid and tested.

65

10

-

... More
M&L for salt glazed stone ware pipe with collars of 150 mm internal dia, grade `A’ ISI marked laid to slope in trenches, jointed in CM 1:1 and tested complete all as specified and as directed.

68

10

-

... More
Taking down carefully to existing copper/Aluminum point wiring (light,socket or power) complete including fittings such as switches, ceiling roses, pendents, sockets, boxes, light fitting etc and removing from site and making good disturbed surfaces of walls, floors etc complete all as specified.

332

10

-

... More
M&L for Point wiring concealed type with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 1.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl concealed PVC conduit (ISI Mark) of required size with all accessories including providing modular steel terminal boxes off size made out of 1.5mm thick MS sheet providing suitable size mounting plates complete accessories for mounting of modular switch/sockets alongwith copper earth wire PVC insulated & unsheathed multistranded (FRLSH) copper conductor cable of size 1.5 Sqmm as continous earth wire connected to common earth and earth dolly complete all as specified.

-

-

-

... More
One light point controlled by one way switch 6/5 Amp .

187

10

-

... More
One Ceiling Fan / Exhaust point controlled by one way switch 6/5 Amp .

42

10

-

... More
One light point controlled by two way switch 6/5 Amp .

1

10

-

... More
One 3 pin socket outlet 6/5 Amps on the same board with other switches.

14

10

-

... More
One 3 pin 6/5 Amp socket outlet controlled by one switch on independent board.

70

10

-

... More
S&F switch piano flush modular type, single pole, one way 6/5 Amp, 240 Volts complete all as specified & directed.

313

10

-

... More
S&F switch piano flush modular type (ISI marked), single pole, two way 6/5 Amp, 240 Volts complete all as specified & directed.

2

10

-

... More
S&F modular socket multipurpose 5 pin, 6/5 Amp piano flush type, 240 Volts complete all as specified & directed.

84

10

-

... More
S&F modular switch piano flush type,single pole, one way 16/15 Amp, 240 Volts complete all as specified & directed.

18

10

-

... More
S&F modular socket 2 in 1, 3 pin, 16/15 Amp flush type, 240 Volts complete all as specified & directed.

18

10

-

... More
S&F ceiling rose, surface bakelite, three terminals complete all as specified & directed.

95

10

-

... More
S&F stepped type electronic fan regulator flush modular 2 module 120 W type complete all as specified & directed.

28

10

-

... More
M&L Point wiring of Power point concealed type contolled by one 15 Amp switch independent with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 2.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl concealed PVC conduit (ISI Mark) of required size with all accessories including providing modular steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing suitable size mounting plates complete accessories for mounting of modular switch/sockets alongwith copper earth wire PVC insulated & unsheathed multistranded (FRLSH) copper conductor cable of size 2.5 Sqmm as continous earth wire connected to common earth and erth dolly complete all as specified and as directed.

18

10

-

... More
S&F LED tube light fitting 4' long, 18/20 Watt single phase 230 V with illumination efficiency more than 120 Lumen/Watt, 3000K/6000K, decorative tuneable white browse through mood changing colour options type slim ultra bright LED polycarbonate tube fixture with extruded heat shrink, environmental friendly energy efficientwith very high efficiency to give glare free light at light source incl integrated electronic driver complete all as specified and directed.

78

10

-

... More
S&F Light mirror light fitting 2' long, 10/20 Watt single phase 230 V with illumination efficiency more than 120 Lumen/Watt, 3000K/6000K, decorative tuneable white browse through mood changing colour options type slim ultra bright LED polycarbonate tube fixture with extruded heat shrink, environmental friendly energy efficientwith very high efficiency to give glare free light at light source incl integrated electronic driver complete all as specified and directed.

14

10

-

... More
S&F Bed side Lamp 3 watt (as per sample) LED light fitting 230V,SP warm light or white colour light complete suitable for single person use in bed to read, light is made of Aluminum braket of dimension 14cmx14cmx3.7cm including connection. Philips Cat No 30975/ or any equivalent make as approved by GE complete all as specified and directed.

56

10

-

... More
S&F LED inverter lamp 9 watt, CDL, B-22 cap, (Pin type), 230V, PF not less than 0.85 (min) complete all as specified and directed .

36

10

-

... More
S&F lamp holder insulated body with back plate suitable for batten fittings complete all as specified & directed.

36

10

-

... More
S&F LED building security light 25 Watt, 230 V new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 with high power LEDs as light source with electronic driver and connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable including brackets complete all as specified and directed.

3

10

-

... More
Taking down carefully serviceable ceiling fan/exhaust fan, dismentling blades and keep in safe custody in store complete all as specified and directed.

14

10

-

... More
Hanging only ceiling fan/Exhaust fan and connection up including provisioning of cable from ceiling rose or connector to fan complete all as specified and directed.

14

10

-

... More
M&L for sub main wiring with 2x6 sqmm PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC Conduit concealed type of suitable size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly including cutting chases in brick/block/stone wall wherever necessary, replastering and making good to match with existing surfaces and taking down unserviceable one complete all as specified and directed. NOTE: (a)Two run of cable with one run of earth wire and one run of conduit ISI Marked will be measured as one length. (b) Unit rate includes for cutting chases for cunduits and sunken boxes and making good.

125

10

-

... More
Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables(Heavy Duty) 1100 volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core incl taking down u/s cable.

85

10

-

... More
Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth and getting out in hard / dense soil for laying of cable / errection of poles / stay assembly etc complete all as specified and directed.

19.51

10

-

... More
Supply and laying Double wall corrugated HDPE duct pipe 63mm outer dia confirming to IS: 16205 of approved colour with fittings for strip protection laid in trenches etc complete all as specified and directed.

76.5

10

-

... More
S&F MCCB DB CRCA sheet powder coated VTPN DB LL 4 way double door factory made suitable for incorporating MCB as out going and MCCB as incoming including connecting incoming and outgoing cables and flush to wall by making the hole in the wall and fixing the DB with cement work and plastering to match with existing surfaces incl taking down existing unsv DB of any size complete all as specified and as directed.

1

10

-

... More
S&F MCCB 4 pole 100 Amps, 50Hz, 415 Volt with rupturing capacity 16 KA.

1

10

-

... More
S&F MCB DB CRCA sheet powder coated SPN 12 way double door factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables and flush to wall by making the hole in the wall and fixing the DB with cement work and plastering to match with existing surfaces incl taking down existing unsv DB of any size complete all as specified and as directed.

4

10

-

... More
S&F MCB SPN having braking capacity 10 KA, 35 to 60 Amp, 240 volts 'C' curve incl taking down unserviceable one complete all as specified and as directed.

4

10

-

... More
S&F MCB single pole having braking capacity 10 KA, 6 to 32 Amps 240 volts 'C' curve incl taking down unserviceable one complete all as specified and as directed.

44

10

-

... More
S&F Bronze gate valve for 20mm bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed, ISI marked conforming to IS 778 : 1984, complete all as specified and directed.

7

10

-

... More
M&L in replacement Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazing/welding properly up to main board including earth pit in cement concrete 1:2:4 type B-1, MS sheet pit cover of checked plate 6mm having angle iron frame 25x25x3 with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and medium grade GI wire protection pipe 25mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point incomplete all as specified and testing on completion complete all as specified and as directed. Note:- The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and MS cover made out of 6mm thick checkered plate hinged both end for open & close for pit etc & no extra payment will be made.

2

10

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.