Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Repair /maint To Pump Sets, Borewells, Filteration Plant, Ro Plant, Pump Starter Panels, Water Supply Automation System And Connected Items At Af Stn Suratgarh in Sri Ganganagar, Rajasthan, with an estimated contract value of Rs. 49,00,000. The bid opening date for this tender is 22-10-2026 and the last date for bid submission is 20-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - Rajasthan Tender

Opening Date22 Oct 2026
Closing Soon20 Nov 2026
Tender Amount₹ 49,00,000 
Notes
Download

Costs

Description

Repair /maint To Pump Sets, Borewells, Filteration Plant, Ro Plant, Pump Starter Panels, Water Supply Automation System And Connected Items At Af Stn Suratgarh

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
(a) Supply only Centre ring.

2

101

-

... More
(b) Supply only ball bearing existing size. Make : NBC/ SKF/ ABL

4

102

-

... More
(c) Supply only pump motor coupling assembly with tyre.

2

103

-

... More
(d) Supply bearing bowl with ball bearing plate.

2

104

-

... More
(e) Supply coupling tyre only.

2

105

-

... More
Repair to parts of pump required under item No-01 above:-

-

-

-

... More
(a) Remetalling, Turning and grinding to pump shaft.

2

107

-

... More
(b) Repairing to bearing housing.

2

108

-

... More
(c) Repair to impeller seat.

2

109

-

... More
(d) Cutting to impeller shaft key way and fixing of lock nut.

2

110

-

... More
(e) Repair to motor cooling fan shaft.

2

111

-

... More
Disconnecting, dismantling and taking out the defective centrifugal pump set of capacity 25 to 40 HP Motor from foundation at water supply installation by opening of coupling, foundation bolts and including replacement of parts as per Item No 5 here-in-after and repair of parts as per item No 6 here-in-after including installing, commissioning and testing on full load, complete all as specificed directed by Engineer-in-Charge. Note : Spare parts and repair of parts shall be measured and paid seperately.

4

112

-

... More
Supply only spare parts as under required in Srl item No.4 here-in-before complete all as specified and directed by Engr-in-charge:-

-

-

-

... More
(a) Supply only CI Impeller

4

115

-

... More
(b) Supply only CI Gland plate.

4

116

-

... More
(c) Supply only Centre ring.

4

117

-

... More
(d) Supply only ball bearing existing size.

8

118

-

... More
(e) Supply only pump motor coupling assembly with tyre.

4

119

-

... More
(f) Supply coupling tyre only.

4

120

-

... More
(g) Supply bearing bowl with ball bearing plate.

4

121

-

... More
Repair to parts of pump reqired under item No-04 above:-

-

-

-

... More
(a) Remetalling, Turning and grinding to pump shaft.

4

123

-

... More
(b) Repairing to bearing housing.

4

124

-

... More
(c) Repair to impeller seat.

4

125

-

... More
(d) Cutting to impeller shaft key way and fixing of lock nut.

4

126

-

... More
(e) Repair to motor cooling fan shaft.

4

127

-

... More
Disconnecting, dismantling and taking out the defective centrifugal pump set of capacity 10 to 20 HP Motor from foundation at water supply installation by opening of coupling, foundation bolts and including replacement of parts as per Item No 8 here-in-after and repair of parts as per item No 9 here-in-after including installing, commissioning and testing on full load, complete all as specificed directed by Engineer-in-Charge. Note : Spare parts and repair of parts shall be measured and paid seperately.

2

128

-

... More
Supply only spare parts as under required in Srl item No.7 here-in-before complete all as specified and directed by Engr-in-charge:-

-

-

-

... More
(a) Supply only CI Impeller

2

130

-

... More
(b) Supply only CI Gland plate.

2

131

-

... More
(c) Supply only Centre ring.

2

132

-

... More
(d) Supply only ball bearing (existing size) : NBC/ SKF/ ABL

4

133

-

... More
(e) Supply only pump motor coupling assembly with tyre.

2

134

-

... More
(f) Supply coupling tyre only.

2

135

-

... More
(g) Supply bearing bowl with ball bearing plate.

2

136

-

... More
Repair to parts of pump required under item No-07 above:-

-

-

-

... More
(a) Remetalling, Turning and grinding to pump shaft.

2

138

-

... More
(b) Repairing to bearing housing.

2

139

-

... More
(c) Repair to impeller seat.

2

140

-

... More
(d) Cutting to impeller shaft key way and fixing of lock nut.

2

141

-

... More
(e) Repair to motor cooling fan shaft.

2

142

-

... More
Disconnecting, dismantling and taking out the defective centrifugal pump set of capacity 7.5 HP Motor from foundation at water supply installation by opening of coupling, foundation bolts and including replacement of parts as per Item No 11 here-in-after and repair of parts as per item No 12 here-in-after including installing, commissioning and testing on full load, complete all as specificed directed by Engineer-in-Charge. Note : Spare parts and repair of parts shall be measured and paid seperately.

2

143

-

... More
Supply only spare parts as under required in Srl item No.10 here-in-before complete all as specified and directed by Engr-in-charge:-

-

-

-

... More
(a) Supply only CI Impeller

2

145

-

... More
(b) Supply only CI Gland plate.

2

146

-

... More
(c) Supply only Centre ring.

2

147

-

... More
(d) Supply only ball bearing (existing size) : NBC/ SKF/ ABL

4

148

-

... More
(e) Supply only pump motor coupling assembly with tyre.

2

149

-

... More
(f) Supply coupling tyre only.

2

150

-

... More
(g) Supply bearing bowl with ball bearing plate.

2

151

-

... More
Repair to parts of pump required under item No-10 above:-

-

-

-

... More
(a) Remetalling, Turning and grinding to pump shaft.

2

153

-

... More
(b) Repairing to bearing housing.

2

154

-

... More
(c) Repair to impeller seat.

2

155

-

... More
(d) Cutting to impeller shaft key way and fixing of lock nut.

2

156

-

... More
(e) Repair to motor cooling fan shaft.

2

157

-

... More
Disconnecting dismantling of cetrifugal monoblock pump set 5 Hp of following capacities of pumps any RPM and dismantiling defective parts such as impeller nut, gland, impeller key, gland packing water deflector bush bearings sleeve, gaskets, volute stud and nuts suction and delivery flange and stud and nuts and all other petty items required to make the pump set functional and reassembling the pump set including installation commissioning and testing, complete all as specified and directed by Engineer-in-Charge.

3

158

-

... More
Disconnecting dismantling of any type of pump set upto 3 Hp of following capacities of pumps any RPM and dismantiling defective parts such as impeller nut, gland, impeller key, gland packing water deflector bush bearings sleeve, gaskets, volute stud and nuts suction and delivery flange and stud and nuts and all other petty items required to make the pump set functional and reassembling the pump set including installation commissioning and testing, complete all as specified and directed by Engineer-in-Charge. Note for Sr item no 1 to 14 : Any other small items required to make pump functional, such as nut bolts, washers, gaskets etc are deemed to be included in item rate.

2

159

-

... More
Disconnecting & dismantling the defective single phase/Three phase induction motor squirrel cage of any make and of capacity up to 3 HP 415 Volts, 50 HZ, 2850 RPM and rewinding the motor with super enamelled copper wire of first quality of existing size/gauge and weight including replacement of all insulation materials, varnish and all other petty items required to make motor functional and re-assembling the motor including installation commissioning and testing on full load complete all as specified and directed.

2

160

-

... More
All as per srl item No.15 here-in-before but motor of capacity 5 HP.

2

161

-

... More
All as per srl item No.15 here-in-before but motor of cap 7.5 HP.

2

162

-

... More
All as per srl item No.15 here-in-before but motor of capacity 10 to 20 HP.

2

163

-

... More
All as per srl item No.15 here-in-before but motor of capacity 25 to 40 HP.

3

164

-

... More
All as per description of serial item No.15 here-in-before but motor of capacity 60 to 75 HP. Note for item no 15 to 20 above:-(a) Transportation charges from installation to contractor works shop and back after repair are included in the rates quoted against the above items. (b) Cost of nuts, bolts, washers, connection plate, grease/ lubrication to bearing bushes etc, are deemed to be included in this item. (c) Old dismantled winding wire will be contractor property for which credit has been considered under schedule of credit.

2

165

-

... More
Dismantling/taking out defective submersible pump set of capacity 15 HP from bore well/open well for repair by means of chain pully block or other T&P, transporting to workshop opening the pump set including repair/replacement of worn out parts, oiling/greasing, lubricating the parts and reassembling, shifting back to bore well, lowering commissioning and testing on full load complete all as specified and directed.Note : Spare parts & repairs as required will be measured and paid seperately

3

166

-

... More
Rewinding of defective submersible motor of 15 HP with PVC insulated copper winding wire of existing gauge and weight including replacement of all insulation material, "O" rings and other petty items required for making motor functional complete all as directed.

3

167

-

... More
Supply only spare parts as under required in Srl item No.21 here-in-before complete all as specified and directed by Engr-in-charge:-

-

-

-

... More
(a) Supply only water seal.

2

169

-

... More
(b) Supply only cable seal.

2

170

-

... More
(c) Supply only Gun metal bearing bush.

2

171

-

... More
(d) Supply only thrust bearing complete

2

172

-

... More
(e) Supply stainless steel distance sleeve.

2

173

-

... More
(f) Supply steel impeller bowl.

2

174

-

... More
(g) Supply stainless steel motor coupling with seal.

2

175

-

... More
(h) Supply packing sheet.

2

176

-

... More
(j) Supply Guide bush.

2

177

-

... More
(k)  Supply cast iron stage bowl.

2

178

-

... More
REPAIR TO PARTS OF SUBMERSIBLE PUMP SET required under item No-21 above:-

-

-

-

... More
(a) Straightening of pump shaft by re-meting welding.grinding etc.

2

180

-

... More
(b) Repair/refixing of distance pieces.

2

181

-

... More
(c) Repair to pump stage housing by seat cutting and bush Fixing.

2

182

-

... More
Dismantling/taking out defective submersible pump set of capacity 7.5/10HP from bore well/open well for repair by means of chain pully block or other T&P, transporting to workshop opening the pump set including repair/replacement of worn out parts, oiling/greasing, lubricating the parts and reassembling, shifting back to bore well, lowering commissioning and testing on full load complete all as specified and directed. Note : Spare parts & repairs as required will be measured and paid seperately

3

183

-

... More
Rewinding of defective submersible motor of 7.5/10 HP with PVC insulated copper winding wire of existing gauge and weight including replacement of all insulation material, "O" rings and other petty items required for making motor functional complete all as directed.

3

184

-

... More
Supply only spare parts as under required in Srl item No.25 here-in-before complete all as specified and directed by Engr-in-charge:-

-

-

-

... More
(a) Supply only water seal.

3

186

-

... More
(b) Supply only cable seal.

3

187

-

... More
(c) Supply only Gun metal bearing bush.

3

188

-

... More
(d) Supply only thrust bearing complete

3

189

-

... More
(e) Supply stainless steel distance sleeve.

3

121

-

... More
(f) Supply steel impeller bowl.

3

122

-

... More
(g) Supply stainless steel motor coupling with seal.

3

123

-

... More
(h) Supply packing sheet.

3

124

-

... More
(j) Supply Guide bush.

3

125

-

... More
(k)  Supply cast iron stage bowl.

3

126

-

... More
REPAIR TO PARTS OF SUBMERSIBLE PUMP SET required under item No-25 above:-

-

-

-

... More
(a) Straightening of pump shaft by re-mettling welding.grinding etc.

3

128

-

... More
(b) Repair/refixing of distance pieces.

3

129

-

... More
(c) Repair to pump stage housing by seat cutting and bush fixing.

3

130

-

... More
Dismantling/taking out defective submersible pump set of capacity upto 5HP from bore well/open well for repair by means of chain pully block or other T&P, transporting to workshop opening the pump set including repair/replacement of worn out parts, oiling/greasing, lubricating the parts and reassembling, shifting back to bore well, lowering commissioning and testing on full load complete all as specified and directed.Note : Spare parts & repairs as required will be measured and paid seperately

2

131

-

... More
Rewinding of defective submersible motor of upto 5 HP with PVC insulated copper winding wire of existing gauge and weight including replacement of all insulation material, "O" rings and other petty items required for making motor functional complete all as directed.

2

132

-

... More
Supply only spare parts as under required in Srl item No.29 here-in-before complete all as specified and directed by Engr-in-charge:-

-

-

-

... More
(a) Supply only water seal.

2

134

-

... More
(b) Supply only cable seal.

2

135

-

... More
(c) Supply only Gun metal bearing bush.

2

136

-

... More
(d) Supply only thrust bearing complete

2

137

-

... More
(e) Supply stainless steel distance sleeve.

2

138

-

... More
(f) Supply steel impeller bowl.

2

139

-

... More
(g) Supply stainless steel motor coupling with seal.

2

140

-

... More
(h) Supply packing sheet.

2

141

-

... More
(j) Supply Guide bush.

2

142

-

... More
(k)  Supply cast iron stage bowl.

2

143

-

... More
REPAIR TO PARTS OF SUBMERSIBLE PUMP SET required under item No-31 above:-

-

-

-

... More
(a) Straightening of pump shaft by re-meting welding.grinding etc.

2

145

-

... More
(b) Repair/refixing of distance pieces.

2

146

-

... More
(c) Repair to pump stage housing by seat cutting and bush Fixing.

2

147

-

... More
S & F GI column pipe medium grade ISI marked of 80 mm bore and both end flanged including making cut mark in flanges for smooth lowering into the tubewell alongwith suitable size nuts, bolts and washers etc, in replacement of existing u/s pipes complete all as specified and directed. Make: Jindal/ Tata/ Prakash surya.

6

148

-

... More
All as per srl item No. 33 here-in-before but of size 100 mm bore.

25

149

-

... More
Disconnecting dismantling of sludge pump set of 0.5 Hp of any RPM and dismantiling defective parts such as impeller nut, gland, impeller key, gland packing water deflector bush bearings sleeve, gaskets, volute stud and nuts suction and delivery flange and stud and nuts and all other petty items required to make the pump set functional and reassembling the pump set including rewinding of motor and installation commissioning and testing, complete all as specified and directed by Engineer-in-Charge. Note : Any other small items required to make pump functional, such as nut bolts, washers, gaskets etc are deemed to be included in item rate.

2

150

-

... More
Disconnecting dismantling of Pressure booster pump set upto 1 Hp of any RPM and dismantiling defective parts such as impeller nut, gland, impeller key, gland packing water deflector bush bearings sleeve, gaskets, volute stud and nuts suction and delivery flange and stud and nuts and all other petty items required to make the pump set functional and reassembling the pump set including rewinding of motor and installation commissioning and testing, complete all as specified and directed by Engineer-in-Charge. Note : Any other small items required to make pump functional, such as nut bolts, washers, gaskets etc are deemed to be included in item rate.

2

151

-

... More
Cleaning and scratching the surfaces of filter bed of filteration plant, walls, floor truffs, drains etc by wire brushes or other wise to remove the deposited mud and waste materials etc washing the filter bed with clean water, complete all as specified and directed by Engineer-in-charge.

2

152

-

... More
Taking out U/S exiting filter media from filtter bed of any size/depth including keeping material to distanceas directed by Engineer-in-Charge, complete all as specified and directed by Engineer-in-charge.

78

153

-

... More
Reuse/relaying the natural gravel pebbles of size 20mm to 40mm grades after washing and cleaning complete, all as specified and directed by Engineer-in-charge.

12

154

-

... More
Reuse/relaying the natural gravel pebbles of size 10 mm to 20mm grades after washing and cleaning, complete all as specified and directed by Engineer-in-charge.

12

155

-

... More
Reuse/relaying the natural gravel pebbles of size 06 mm to 10mm grades after washing and cleaning, complete all as specified and directed by Engineer-in-charge.

12

156

-

... More
Reuse/relaying the natural gravel pebbles of size 02mm to 06mm grades after washing and cleaning, complete all as specified and directed by Engineer-in-charge.

12

157

-

... More
Reuse/relaying white silica sand filter media of effective size 0.5mm to 2mm after washing and cleaning, complete all as specified and directed by Engineer-in-charge.

10

158

-

... More
Supply and laying the natural gravel pebbles of size 20mm to 40mm grades, complete all as specified and directed by Engineer-in-charge.

4

159

-

... More
Supply and laying the natural gravel pebbles of size 10mm to 20mm grades, complete all as specified and directed by Engineer-in-charge.

4

160

-

... More
Supply and laying the natural gravel pebbles of size 06 mm to 10 mm grades complete all as specified and directed by Engineer-in-charge.

4

161

-

... More
Supply and laying the natural gravel pebbles of size 2mm to 6mm grades, complete all as specified and directed by Engineer-in-charge.

4

162

-

... More
Supply and laying white silica sand filter media of effective size 0.5mm to 2mm as per sample in GE office, complete all as specified and directed by Engineer-in-charge. Note for item no 44 to 48:- 1. Gravel for filter bed shall be obtained from approved source and filter sand shall be as per sample Kept in GE office.

4

163

-

... More
Taking out old slotted pipes of any type and size and S&F ductile Iron pipes of 80mm bore with flanged ends, Class “K-7”, having slots for filtered water as per the existing shape, size and pattern, complete all as specified and directed by Engineer in Charge.

40

164

-

... More
Repair of mettalic float ball and mettalic lever operated 200/150mm valve fixed at water filteration plant, main water supply Maru Vihar including replacement of unserviceable parts . Note: contractor is advised to visit the water filteration plant Maru Vihar . Contractor is liable to made the said valve fully functional after installation so any other items needed to made valve functional up to the satisfaction of Accepting officer/ Eng In Charge shall deemed to be included in the quoted rate.

1

165

-

... More
Disconnecting, dismantling and taking out the defective floculator motor 2 HP coupled with worm reduction gear box (Solid shafts, Vertical Output and Under driven input shaft) with gear ratio of 70:1 connected through belt drive mounting plate , shaft , impeller blade with pulley flanges on motor and gear box suitable for clari floculator of discharge capacity 30000 Gallons per hour at water supply installation by opening of coupling, foundation bolts and including repair of minor parts and including installing, commissioning and testing on full load, complete all as specificed directed by Engineer-in-Charge.

1

166

-

... More
Dismantling and taking down existing unserviceable chloronome plant/ bleaching dozer and replacement of unserviceable inlet/ outlet pipes, washers, gauge, foot valve, control valves, nozzles etc and refixing the same and testing after making fully functional complete all as specified and directed by Engr in charge.

2

167

-

... More
Dismantling the unserviceable Alum feeding motor 2/3 HP along with electric winch to civil work shop for rewinding of motor, replacing the unserviceable relay switch of the winch, servicing and overhauling including all greasing work and refixing the same as existing and testing for smooth functioning, complete all as specified and directed.

1

168

-

... More
Repair/servicing of Air compressor assembly including 7.5/10 HP along with electric winch to civil work shop for rewinding of motor, servicing and overhauling including all greasing work and refixing the same as existing and testing for smooth functioning, complete all as specified and directed.

1

169

-

... More
Supply and testing chlorine testing kit suitable for testing with O-Tolidine solution for regular test including solution, in packing 500 ml complete all as specified and directed by the Engineer-in-Charge.

5

170

-

... More
Material and labour for cleaning RO water storage tank of storage capacity 10000Ltrs from the bottom, sides and removing rubbish to a distance not exceeding 50 metre . including preparation of surface by wire brushing and washing the surface by clear water including writing date of cleaning ,removal of roots and uprooting of grass etc. all around upto 2 metre from plinth of tank, complete all as specified and directed by Engineer-in-Charge.

16

171

-

... More
Material and labour for servicing and repair /maint of RO Plant of capacity 11000 Ltrs/hrs including replacement of all bag filters, cartridge filter,backwash of membrane (including chemical ), tightening of all bends and coupling of PVC Pipe, checking of electrical and control wiring etc. including testing of water from authorised lab after every service to check the desired value of drinking water complete all as specified and directed by Engineer-in-charge . Note :- Spare parts suitable for existing plant required to be replaced shall be paid separately under respective items .

2

172

-

... More
Supply only Bag filter of size 7"X32"

12

173

-

... More
Supply only cartridge filter of size 40"X2.5"

12

174

-

... More
Supply, fixing, testing of CPVC pipes of size 65 mm including elbow,union,tee,etc as per site requirement including removing old unserviceable pipes complete all as specified and as directed.

6

175

-

... More
supply, fixing, testing of CPVC pipes of size 50 mm including elbow, union, tee, etc as per site requirement including removing old unserviceable pipes complete all as specified and as directed.

6

176

-

... More
Supply, fixing, testing of CPVC pipes of size 20 mm including elbow, union, tee, etc as per site requirement including removing old unserviceable pipes complete all as specified and as directed.

12

177

-

... More
Supply only RO antiscalant chemical. Complete all as specified and as directed.

140

178

-

... More
Material and labour for activated carbon coconut shell 1000 IV filter media of same size for RO plant and quality as per the existing media as approved and directed by Eng in charge.

310

179

-

... More
Material and labour for water softening resin media of same size and quality as per the existing resin as approved and directed by Eng in charge.

0.5

180

-

... More
Supply, fixing, testing of CPVC Ball valve of 20 mm nominal dia including elbow, union, tee, etc. as per site requirement including removing old unserviceable valves complete all as specified and as directed.

2

181

-

... More
Supply, fixing, testing of CPVC Ball valve of 50 mm nominal dia including elbow, union, tee, etc. as per site requirement including removing old unserviceable valves complete all as specified and as directed.

3

182

-

... More
Supply, fixing, testing and commissioning of TDS meter model no CI -550 (panel mount), complete all as specified and as directed.

1

183

-

... More
Material and labour for removing unserviceable membrane from RO plant of capacity 11000 Lt/Hr and supply and fixing new Membrane of diameter 200mm( series 8040) having Max feed flow rate of 16 gpm, consist of Polyamide Thin film composite and offering hard shell exterior for extra strength and testing for smooth functioning of RO plant all as specified and as directed.

4

184

-

... More
Supply, fixing, testing as in replacement Multiport/ Multifunctional valve of existing size fitted in 50mm dia CPVC/UPVC pipe for RO plant.

2

185

-

... More
Supply and fixing of special type valves similar to sluice valves screwed down high pressure, heavy duty, with iron wheel head or lever type operation, flanged both ends for iron pipe or for unions suitable for 25 mm bore pipe as fixed at site, including taking down old unserviceable complete all as specified and directed by Engineer-in-Charge.

1

186

-

... More
Supply and fixing of special type valves similar to sluice valves screwed down high pressure, heavy duty, with iron wheel head or lever type operation, flanged both ends for iron pipe or for unions suitable for 40 mm bore pipe as fixed at site, including taking down old unserviceable complete all as specified and directed by Engineer-in-Charge.

1

187

-

... More
Taking down old unserviceable LCM electric dosing pump, material and labour for LCM electric dosing pump of cap 0-6 IPH,pressure 3 kg/sq cm, automatic type as installed at station RO plant complete all as specified and directed.

1

188

-

... More
Supply only Calcium hypochlorite granules having 65-70% chlorine content( Calcium based granular disinfectant) for general water treatment in factory sealed container/ drum of 40 to 45 KG packing complete all as specified and directed as per following specifications:- a. Particle size( passing through 1.70mm IS sieve).- Min 99.5% b. Max water insoluble matter- 6%. c. Max Calcium hydroxide- 4%. d. Max Sodium Chloride- 15%. e. Min Available chlorine- 65% by mass.

3340

189

-

... More
Supply and fix in replacement 3 pole AC power contactor of cap 95-110 Amp , 415 volt three phase, Including sidemounting Add-on-aux.Contact block of existing size complete all as specified and directed by Engr -in-Charge.

1

190

-

... More
Description all as per item No 75 above but of cap 65-80 Amp, 415 Volt, Three Phase.

2

191

-

... More
Description all as per item No 75 here-in-before but of cap 32-50 Amp, 415 Volt, Three Phase.

2

192

-

... More
Description all as per item No 75 here-in-before but of cap 16-25 Amp, 415 Volt, Three Phase.

5

193

-

... More
S&F in replacement digital volt metrer 96x96mm 0 to 100 Amps complete all as specified.

3

194

-

... More
S&F in replacement Digital volt meter 96x96mm 0 to 400 Volt complete all as specified.

3

195

-

... More
Supply and fixing in replacement fully automatic star-delta starter heavy duty with inbuilt volt and amp meter with 3 Nos Indicating lamps for centifugal/submersible pump set of capacity 60 to 75 HP , 415 V , 50 Hz ,3 Phase,with suitable rating of contactor ,overload relay range ,with single phase protection complete all as specified and directed by Engr-in-Charge.

1

196

-

... More
All as per item No 81 here-in-before but of cap 30 to 40 HP.

1

197

-

... More
All as per item No 81 here-in-before but of cap 20 to 30 HP.

1

198

-

... More
All as per item No 81 here-in-before but of cap 10 to 15 HP.

1

199

-

... More
Removing old unserviceable starter any type and supply and fixing testing and commissioning DOL starter, AC 3 phase, 415 Volt, 50 Hz with sheet metal enclosure with wide band coil heavy duty with single phase preventer suitable for 3 HP/5HP motor including making connection with suitable size of copper cable complete all as specified and as directed.

2

200

-

... More
S&F in replacement Single phase preventor suitable for low/high voltage cut, over current, phase failure complete all as specified.

5

201

-

... More
S&F in replacement of MCCB of capacity 400 Amps , 4 pole, 50 KA complete all as specified and directed by Engr-in-charge.

1

202

-

... More
Description all as per item No 87 here-in-before but of capacity 250 Amps , 3 pole, 36 KA

1

203

-

... More
Description all as per item No 87 here-in-before but of capacity 200 Amps , 3 pole, 36 KA

1

204

-

... More
Description all as per item No 87 here-in-before but of capacity 160 Amps , 3 pole, 36 KA

1

205

-

... More
Description all as per item No 87 here-in-before but of capacity 125 Amps , 3 pole, 36 KA

1

206

-

... More
Description all as per item No 87 here-in-before but of capacity 100 Amps , 3 pole, 16 KA

2

207

-

... More
Description all as per item No 87 here-in-before but of capacity 63 Amps , 3 pole, 16 KA

2

208

-

... More
S&F in replacement of changeover of capacity 400 Amps , 4 pole heavy duty with complete all as specified and directed by Engr-in-charge.

1

209

-

... More
S&F in replacement of changeover of capacity 250 Amps , 4 pole heavy duty complete all as specified and directed by Engr-in-charge.

1

210

-

... More
S&F in replacement of changeover of capacity 100 Amps , 4 pole heavy duty with complete all as specified and directed by Engr-in-charge.

1

211

-

... More
Supply and fixing overload relay range 13-22Amp complete all as specified and directed by Engr-in-charge.

2

212

-

... More
Supply and fix in replacement of overload relay range 28-42 amp complete all as specified and directed by Engr-in-charge.

2

213

-

... More
Supply and fix in replacement of overload relay range 70-110amp complete all as specified and directed by Engr-in-charge.

2

214

-

... More
S&F in replacement Electronic Timers Type ST 100, 3 - 30 secs complete all as specified.

2

215

-

... More
Supply and fixing in replacement of LED indicator lamps of colour red / green/ yellow as per exiting sample/ size

10

216

-

... More
Supply and fixing in replacement of push button with Led indicator red/ green type -240 Volt Ac as per exiting sample/ size

8

217

-

... More
Supply and fix in replacement PVC insulated and PVC sheathed 1100 volt grade (H/D) copper conductor cable 25 Sqmm, 3 core round submersible cable ISI marked including copper thimbles as required complete all as specified and directed by Engr-in-Charge.

100

218

-

... More
Description all as per item No 103 here-in-before but of copper submersible cable of size 16 sqmm 3 core.

120

219

-

... More
Description all as per item No 103 here-in-before but of copper submersible cable of size 10 sqmm 3 core.

150

220

-

... More
Description all as per item No 103 here-in-before but of copper submersible cable of size 6 sqmm 3 core.

100

221

-

... More
Taking down old unserviceable butter fly valve and supply and fixing new butter fly valve size 200 mm with rubber packing etc complete all as specified and directed.

2

221

-

... More
All as per Ser item 106 here in before but butterfly valve of size 150 mm with rubber packing etc complete all as specified and directed.

2

222

-

... More
All as per Ser item 106 here in before but butterfly valve of size 100 mm with rubber packing etc complete all as specified and directed.

3

223

-

... More
All as per Ser item 106 here in before but butterfly valve of size 80 mm with rubber packing etc complete all as specified and directed.

5

224

-

... More
All as per Ser item 106 here in before but butterfly valve of size 50 mm with rubber packing etc complete all as specified and directed.

2

229

-

... More
Supply and fix Foot valve with flanged ends with nut-bolts and rubber gasket suitable for pipe of size 250 mm including taking out the unserviceable foot valve from the pipe complete all as specified and directed by Eng-in-Charge.

1

229

-

... More
All as per serial item No-112 here-in-before but size 200 mm(8'') dia.

1

230

-

... More
All as per serial item No-112 here-in-before but size 150 mm(6'') dia.

2

231

-

... More
All as per serial item No-112 here-in-before but size 100 mm(4'') dia.

2

232

-

... More
Repacking / repair stuffing box of sluice valve spindle including taking apart and reassembling of size 100 to 350mm bore size all as specified and directed by the Engr-in-Charge.

4

233

-

... More
Taking out sluice valves refacing, regrinding and refixing including replacing spindle and check nut and make serviceable of size 100 to 350mm bore size all as specified and directed by the Engr-in-Charge.

4

234

-

... More
Taking out old U/S Non return valve from 80 to 250 mm from any position , cleaning the same throughly and carrying out necessary repair like changing of leather , nut bolts rubber packing etc with all fittings complete all as specified and directed.

8

235

-

... More
Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed .

4

236

-

... More
M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundations filling and mass concrete, complete all as specified and directed by Engineer-in-charge.

4

237

-

... More
Supply and fixing GI perforated channel type cable tray of size 300x50 mm thickness of sheet not less than 16 gauge complete all as specified and directed by Engr-in- Charge. The rate are including of removing serviceable cables and fixing it on cable tray properly all as directed

20

238

-

... More
M&L for replacement of Earthing complete with galvanized iron or steel plate electrode 600 mm x 600 mm x 6.00 mm thick buried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron strip 25 x 4mm dia as earthing lead by means of GI bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 40 mm bore (light grade) connected to machinery/equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20mm bore light grade GI pipe for watering, funnel, wire mesh, PCC (1:3:6) type C-1 chamber, PCC (1:2:4) type B-1 reinforced with 6 mm dia MS round bars @ 15 cm c/c both ways for cover 50 mm thick and MS frame of suitable size made of angle iron 50 x 50 x 60 mm, complete all as specified and directed. Note :- (i) The unit rate includes earth lead and protection pipe up to maximum 7.5 metre from earth plate to earth point/test point. (ii) Earth pit shall be constructed minimum 0.5 metre away from existing earth.

5

239

-

... More
Supply and fixing in replacement of old unserviceable earth continuity conductor of size 25x4mm galvanised iron strip along with all necessary jointing material complete all as specified and directed by Engineer-in-charge.

50

240

-

... More
M&L for removing old paint from surface of LT panel of any size by scraping,rubbing and making good surface for painting and applying powder coated spary painting of existing colour complete as specified and directed.

10

241

-

... More
Greasing/Oiling of pump sets capacity upto 75 HP with grease gun and necessary T&P for greasing/oiling of pump set at water supply installation complete all as specified and directed by Engr-in-Charge.

10

242

-

... More
Painting of pump sets of capacity upto 75 Hp with spray coated painting and necessary T&P for painting of pump set complete all as specified and directed by Engr-in-Charge.

10

243

-

... More
Supply and fixing high quality ACP sheet of size 1.5 feet x 1.0 feet minimum with router cutting letter blue base of sheets and white colour acrylic letter with complete fitting complete all as specified and directed by Engr-in-Charge. Note:- Detail of printing material for flex will be provided by department.

5

244

-

... More
Attending pump/motor/LT panels/Starters complaint at Installation and rectify the same, including replacement of thimbles (any type and any size) with nut-bolts and cable jointing with tap, gland packing, greasing in pumps/valves with all connected items all as specified by the Engr-in-Charge. Note: Complaint should be rectify within 06 Hrs otherwise a penalty of 250 Rs per day will be imposed.

30

246

-

... More
Supply and fixing in replacement CI water meter of 100 to 150mm dia including flange, nut bolts etc welding work at as per site requirement complete all as specified and directed.

1

247

-

... More
Taking down old unserviceable water tank of any capacity and Supply & fix Rotational moulded polyethylene water storage tanks three layer white colour of 10000 Ltr Capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed by Engineer In charge.

1

248

-

... More
Taking down unserviceable pressure booster pump and supply, fixing, commissioning and testing of self priming pressure booster pump set 0.5 HP, 220 volts, 50 Hz including making connection with existing as per site requirement including deposing the old pump in MES store yard complete all as specified and all as directed.

2

249

-

... More
Taking down unserviceable sludge pump and supply, fixing, commissioning and testing of self priming monoblock sludge pump set 0.5 HP, head 6-12 mtr, discharge 1.2 to 3.1 LPS as per site requirement including deposing the old pump in MES store yard complete all as specified and all as directed.

1

249

-

... More
S&F in replacement of LED swimming pool light 36 watt round type, input voltage 12V DC with lens and toughen glass top, under water LED light IP 68, ABS material, changeable colour with RGB (Red Green, Blue) controller & SMPS (Static Maintainace power supply) with all accessories and complete water proof light, at fixing at minimum 1.5 mtr depth of water on wall, including connecting cable of size 1.5 sqmm copper multi strandedard IS:694 cable upto 1 mtr, as directed by Engr-in-Charge.

3

249

-

... More
S&F rubber PVC hose pipe, superior quality, heavy duty, 80mm dia, complete all as directed by the Engineer-in-Charge.

60

249

-

... More
All as per Srl Item No 134 here-in-before but 40/50mm dia, complete all as directed by the Engineer-in-Charge.

50

249

-

... More
All as per Srl Item No 134 here-in-before but 20/25mm dia, complete all as directed by the Engineer-in-Charge.

50

249

-

... More
S&F in replacement; PVC brush with suction head sweeper made of first quality seasoned wood and coir suitable for suction sweeper 5 ft long, 6 inch wide as per sample, complete all as directed by the Engineer-in-Charge.

2

249

-

... More
Supply, fixing & testing of UPVC pipes 50mm outer dia including elbow, union, tee, etc as per site requirement tested to 10 kg/sq.cm pressure including removing old unserviceable pipes, complete all as specified and as directed.

5

249

-

... More
Supply, fixing & testing of UPVC pipes 75/80mm outer dia including elbow, union, tee, etc as per site requirement tested to 10 kg/sq.cm pressure including removing old unserviceable pipes, complete all as specified and directed.

6

249

-

... More
Supply, fixing & testing of UPVC pipes 100mm outer dia including elbow, union, tee, etc as per site requirement tested to 10 kg/sq.cm pressure including removing old unserviceable pipes, complete all as specified and directed.

6

249

-

... More
Supply, fixing & testing of UPVC pipes 150mm outer dia including elbow, union, tee, etc as per site requirement tested to 10 kg/sq.cm pressure including removing old unserviceable pipes, complete all as specified and directed.

5

249

-

... More
Supply, fixing & testing of UPVC pipes 200mm outer dia including elbow, union, tee, etc as per site requirement tested to 10 kg/sq.cm pressure including removing old unserviceable pipes, complete all as specified and directed.

5

249

-

... More
Supply and fix fire hydrant landing valve type A (single outlet) gunmetal of 80 mm dia with 63 mm dia female outlet complete and 80 mm inlet with rubber blank cap and chain as per IS 5290 ,suitable for brigade hose of 63 mm with couplings concorming to IS 903 complete all as specified and directed by Engr-in-charge.

4

249

-

... More
Supply and fix fire hydrant landing valve type B (double outlet) gunmetal of 80 mm dia with 63 mm dia female outlet complete and 80 mm inlet with rubber blank cap and chain as per IS 5290 ,suitable for brigade hose of 63 mm with couplings concorming to IS 903 complete all as specified and directed by Engr-in-charge.

3

249

-

... More
Taking out leaking hydrant valve of any size from any position,cleaning the same thoroughly and carrying out necessary repair like changing of leather,nuts, bolts,rubber packing etc with all fittings complete all as specified and as directed.

4

249

-

... More
Taking down old unserviceable and Supply and fixing following size electrically operated water flow switches (Vane type) including tamper switch and accessories, complete with tap off socket arrangement as required, with potential free contact with 2 Nos, complete all as specified and directed.

2

249

-

... More
Taking down old unserviceable and supply & fixing dial type (100 mm) pressure gauge with isolation ball valve suitable for working pressure of 250 PSI. Cost shall be inclusive of supplying any short pieces, nipples, elbows etc, complete all as specified and directed.

4

249

-

... More
Supplying and fixing approved make 25mm dia. Automatic air release valve complete all as specified and directed.

2

249

-

... More
Supply, fixing & testing of 63mm dia 15 mtr long Controlled percolating rubberised fabric hose conforming to IS 8423 (type 'A') including gun metal male and female instantaneous coupling, bound and rivetted to hose pipe with 1.5 mm dia copper wire complete in all respects, hose BSI marked, conforming to IS 636 type II and complete male female coupling conforming to IS 903 after removing the old hose pipe complete all as specified and directed.

4

249

-

... More
Supply, fixing & testing of 63mm dia 30 mtr long Controlled percolating rubberised fabric hose conforming to IS 8423 (type 'A') including gun metal male and female instantaneous coupling,bound and rivetted to hose pipe with 1.5 mm dia copper wire complete in all respects, hose BSI marked, conforming to IS 636 type II and complete male female coupling conforming to IS 903 after removing the old hose pipe complete all as specified and directed.

3

249

-

... More
Supply & fixing in replacement Dual plates CI wafer type check valve, 80 mm bore tested to pressure of 15Kg/ Sqcm without by pass arrangement type conforming to IS:5312 with flanged ends, swing type including nuts, bolts, washer and rubber gaskets complete all as specified and directed by Engr-in-charge.

2

249

-

... More
All as per serial item No-149 here-in-before but size 100 mm(4'') dia.

2

249

-

... More
All as per serial item No-149 here-in-before but size 150 mm(6'') dia.

2

249

-

... More
All as per serial item No-149 here-in-before but size 200 mm(8'') dia.

1

249

-

... More
M & L for Discharge pressure switch - standard (UL/FM). The pressure switch is activated by pressure from the agent during discharge and can be used to signal to a control panel that the system has actually discharged. The pressure switch latches on operation and has a reset button including taking down old unserviceable switch complete all as specified and directed.

2

249

-

... More
Material and labour for complete servicing of 85 BHP, 1800 RPM diesel engine driven fire pump, removing all accessories required for repair/replacement, cleaning, washing of all the parts and reassembling after repair/replacement and commissioning testing on full load including complete replacement of engine oil, coolant and replacement of the following items:- M&L for replacement of Air filter. M&L for replacement of lubrication oil filters. M&L for replacement fuel filters. M&L for cleaning of fuel tank thoroughly M&L for cleaning of radiator assembly thoroughly.

1

249

-

... More
Mild steel framed work for such as angle/channel etc with ends of bars shouldered and riveted or forged into spikes, frame guard bars, barred iron doors, frame work as per direction and similar work conforming to Fe-290 Gde-E-165 at any installation as per requirement complete all as specified and directed by Engr-in-Charge.

2500

249

-

... More
Dismantling RO plant at Clear sump water supply installation, taking out all the vessels and fixing after cleaning thoroughly all the components in the plant building after necessary repair of the foundation and steel structural frame of the plant. Note- MS work and foundation work will be paid separately. All the labour and machinary required will be arranged by the contractor without any extra cost to the department.

1

249

-

... More
Shifting of pumpsets of any capacity from one installation to other and refixing the same with all connecting accessories including nut, bolts and other minor items complete all as speciified.

2

249

-

... More
Supply,install,testing and commissioning of LT indoor panel of suitable size 3 phase and neutral 415 volts fabricated out of 2 mm thick CRCA sheet powder coated ,front and back door openable suitable for and including 160 Amps size Aluminium bus bar, mounted on suitable DMC insulator and insulated with PVC sleeve not less than 2 mm thick and duly colour coated with (red,yellow,blue,and black) internal wiring with suitable size of PVC insulated copper wire, use with angle iron 50x50x6 mm frame to be used for bottom of the panel board ,IP 54 protection 30 cm blow ground level and 60 cm above ground leval ,grouted by using PCC foundation 1:2:4 type C1 with 20 mm graded stone aggregate , thimbling and cable entry boxes with cable gland including painting with two coat of powder coated paint complete and taking down old panel and connecting all cables incoming and outgoing by suitable lugs and connecting all with the following :-(Note- all the outgoing MCCB's must be connected with suitable size aluminium strips bent to shape duly insulated as mentioned above with suitable insulator support (CPRI approved) complete all as specified and directed.

1

249

-

... More
(a) Incoming MCCB 160 Amps 4 pole 36 kA, 50 Hz, 415 Volts , thermal magnetic relaese type -1 Nos (b) Outgoing MCCB 125 Amps 3 pole 16 kA - 2 Nos (c) Fully automatic star delta starter with Single Phase Protection, 60 HP, 3 Phase, 50 Hz , 415 volt - 02 Nos (d) Digital Voltmeter selecter switch- 01 Nos (e) Digital Ameter 0-160 Amps with selecter switch- 01 Nos (f) LED indicating Lamp set (Set of three) - 03 (g) Single phase preventer -2 Nos

-

-

-

... More
Supply, Install , testing and commissioning of LT panel of suitable size 3 Phase 415 Volts outdoor type cubical compartmentalised vermin and water proof fabricated out of 3.15mm thick CRCA sheet powder coated front and back door openable suitable for and including 160 amps rated aluminium bus bar, insulated with PVC sleaves and coloured with (red, yellow,blue and black) CTR and internal wiring with suitable size of PVC insulated copper wire, use with angle iron 50x50x6 mm frame bottom of the panel board , grouted by using PCC foundation 1 : 2 : 4 type C1 with 20 mm graded stone aggregate , thimbling and cable entry boxes with cable gland inculding painting with two coat of powder coated painting over a coat of red oxide primer after dismantelling the existing LT panel complete with (and suitable for housing the) following :-

1

249

-

... More
(a) Incoming MCCB 160 Amps 4 pole 36 kA, 50 Hz, 415 Volts , thermal magnetic relaese type -1 Nos (d) Outgoing MCCB 63 Amps 3 pole 16 kA - 03 Nos (e) Fully automatic star delta starter with Single Phase Protection, 7.5 HP, 3 Phase, 50 Hz , 415 volt - 03 Nos (h) Digital Voltmeter selecter switch- 01 Nos (i) Digital Ameter 0-160 Amp with selecter switch- 01 Nos (j) LED indicating Lamp set Set of three - 04 (k) Single phase preventer -3 Nos

-

-

-

... More
Supply, installation, testing and commissioning 3 phase and neutral, 415 volts indoor type factory made free standing, floor mounting, dust and vermin proof cubical type, LT feeder pillar box fabricated from 2 mm thick (minimum) CRCA sheet with anti corrosive coating and finally epoxy powder coating of lint Grey shade (RAL-7032), fully compartmentalized design with 4 Nos of aluminimum busbar 400 amp including suitable aluminium earth strips conforming to IS and all as specified with supply and to accommodate the MCCBs and metering equipment with angle iron 50x50x6 mm frame bottom of the panel board , grouted by using PCC foundation 1 : 2 : 4 type C1 with 20 mm graded stone aggregate , thimbling and cable entry boxes with cable gland after dismantelling the existing LT panel and depositing in MES Storeyard complete:- INCOMING (i) MCCB 4 Pole 250 amp 50 Hz, 415 V with reputring capacity 36 KA with microprocessor based release - 01 No (ii) Multifunctional meter Digital flush type with in built selector switch - 01 No (iii) LED INDICATORS Red, Yellow and Blue -INCOMING AND EACH OUTGOING (iv) CTs of ratio 250/5 having accuracy class 1 and VA burden 15 VA

1

249

-

... More
OUTGOING (i) MCCB 3 Pole 160 amp 50Hz,415 Hz with electronic release - 01 No ( Main pump) (ii) MCCB 3 pole 100 amp - 01 Nos (iii) MCCB 3 pole 63 Amp - 02 Nos (iv) Fully automatic star delta starter 40 HP, in open execution comprising air break contactors, over load protection relays, single phase protector, time delay relay, auxiliary contacts for auto functioning, selector switch for auto/manual mode etc duly prewired all as required and directed - 01 Nos (v) Fully automatic star delta starter 25 HP, in open execution comprising air break contactors, over load protection relays, single phase protector, time delay relay, auxiliary contacts for auto functioning, selector switch for auto/manual mode etc duly prewired all as required and directed - 01 Nos (vi) Fully automatic star delta starter 7.5 HP, in open execution comprising air break contactors, over load protection relays, single phase protector, time delay relay, auxiliary contacts for auto functioning, selector switch for auto/manual mode etc duly prewired all as required and directed - 02 Nos (vii) Push button for manual ON/OFF of the Pump.

-

-

-

... More
iv) LED Indicators for ON/OFF (B) Diesel engine driven Fire pump i) Battery charger 10A 01 nos ii) Control circuit for auto operation of the pump. iii) Push button for manual ON/OFF of the Pump. iv) LED Indicators for ON/OFF v) DC hooter 12v 01 Nos All accessories prewired with suitable size copper conductor cables, wiring from panel to pumps/control switches etc within plant room, MCBs for protection of relays/contactor coils/measuring instruments all as required to make the system functional on auto/manual mode complete all as specified and directed

-

-

-

... More
Supply,install,testing and commissioning of LT indoor panel of suitable size 3 phase and neutral 415 volts fabricated out of 2 mm thick CRCA sheet powder coated ,front and back door openable suitable for and including 400 Amps size Aluminium bus bar, mounted on suitable DMC insulator and insulated with PVC sleeve not less than 2 mm thick and duly colour coated with (red,yellow,blue,and black) internal wiring with suitable size of PVC insulated copper wire, use with angle iron 50x50x6 mm frame to be used for bottom of the penal board ,IP 54 protection 30 cm blow ground level and 60 cm above ground leval ,grouted by using PCC foundation 1:2:4 type C1 with 20 mm graded stone aggregate , thimbling and cable entry boxes with cable gland including painting with two coat of powder coated paint complete and taking down old panel and connecting all cables incoming and outgoing by suitable lugs and connecting all with the following :-(Note- all the outgoing MCCB's must be connected with suitable size aluminium strips bent to shape duly insulated as mentioned above with suitable insulator support (CPRI approved) complete all as specified and directed.

1

249

-

... More
(a) Incoming MCCB 400 Amps 4 pole 50 kA, 50 Hz, 415 Volts, thermal magnetic release type -1 Nos (b) Outgoing MCCB 100 Amps 3 pole 16 kA - 4 Nos (c) Outgoing MCCB 63 Amps 3 pole 16 kA - 3 Nos (d) Fully automatic star delta starter with Single Phase Protection, 25 HP, 3 Phase, 50 Hz , 415 volt - 02 Nos (e) Fully automatic star delta starter with Single Phase Protection, 10 HP, 3 Phase, 50 Hz , 415 volt - 02 Nos (f) Fully automatic star delta starter with Single Phase Protection, 15 HP, 3 Phase, 50 Hz , 415 volt - 02 Nos (g) Digital Voltmeter selecter switch- 01 Nos (h) Digital Ameter 0-400 Amp with selecter switch- 01 Nos (i) LED indicating Lamp set - 08 Set of three (j) Single phase preventer - 07 Nos

-

-

-

... More
Supply, Install , testing and commissioning of LT panel of suitable size 3 Phase 415 Volts outdoor type cubical compartmentalised vermin and water proof fabricated out of 3.15mm thick CRCA sheet powder coated front and back door openable suitable for and including 63 amps rated aluminium bus bar, insulated with PVC sleaves and coloured with (red, yellow,blue and black) CTR and internal wiring with suitable size of PVC insulated copper wire, use with angle iron 50x50x6 mm frame bottom of the panel board , grouted by using PCC foundation 1 : 2 : 4 type C1 with 20 mm graded stone aggregate , thimbling and cable entry boxes with cable gland inculding painting with two coat of powder coated painting over a coat of red oxide primer after dismantelling the existing LT panel complete with (and suitable for housing the) following :-

4

249

-

... More
(a) Incoming MCCB 63 Amps 3 pole 16 kA, 50 Hz, 415 Volts, thermal magnetic relaese type - 01 Nos (b) Outgoing MCB TP 63 Amps - 01 Nos (d) Fully automatic star delta starter with Single Phase Protection, 15 HP, 3 Phase, 50 Hz , 415 volt - 01 Nos (e) Digital Voltmeter selecter switch- 01 Nos (h) Digital Ameter 0-100 Amp with selecter switch- 01 Nos (i) LED indicating Lamp set - 01 Set of three (j) Single phase preventer - 01 Nos

-

-

-

... More
M&L for making header of pipe of 100 to 150mm dia with appropriate length as per site requirement for 2/3 raising main from existing pipe line connected to header with two no of oultets of size as per site requirement at inlet at as well as outlet pipelines, raising main from existing pipeline with all complete accessories including welding/cutting of pipes and flanges etc, PCC foundation of suitable size for giving support to header complete all as specified and directed.

1

249

-

... More
Supply, Laying and testing MS pipes heavy grades (ERW steel) including cutting,bending and welding as per site requirement and specials with flanged and drilled ends, jointing materials like nuts, bolts and gasket etc of nominal dia 100 mm as per IS 1239 (1981) fixed in replacement of existing u/s complete by cutting road/footpath/ floor/ hard standing and making surface good as previous complete all as specified and directed by Engineer-in-charge.

24

249

-

... More
Supply , fixing , testing, commissioning as in replacement of motor actuated butterfly valve of 80 mm nominal dia complete single phase motor actated butterfly with gear box valve set with disc material of CI with nylon coating, hand wheel for manual operation, pressure rating of PN10 and having 02 nos limit switches for oper / closed condition and capability of accepting 4-20mA input complete set Modulating torque range from 15 Nm to 1,600 Nm/Max. number of starts 1,200 c/h/Output speeds from 4 to 90 rpm/Limit sensing/Available with single-ph AC/Mounting : C Type Flange, B14, IS 2223 Enclosure Protection after mounting/microcontroller Connectivity/Open and Close Method: Limited by internal limit switches Open - Close feedback/Pressure Range: 0-10 bar/Body complete all as specified and directed.

1

249

-

... More
All as per serial item No-173 here-in-before but 100 mm(4'') dia.

2

249

-

... More
All as per serial item No-173 here-in-before but 150 mm(6'') dia.

2

249

-

... More
All as per serial item No-173 here-in-before but 200 mm(8'') dia.

2

249

-

... More
Supply and fixing in replacement of water level controller relay card 10 Levels type as per exiting sample/ size Make : RDS/Omron or eqivalent make

1

249

-

... More
Supply and fixing in replacement of water level controller relay card 5 Levels type as per exiting sample/ size Make : RDS/Omron or eqivalent make

1

249

-

... More
Supply and fixing in replacement of SMPS unit suitable for out put 24 volt DC and input 230 volt AC of rating 3Amp as per exiting sample/ size Make: NHP/ Schneider/ Omron

1

249

-

... More
Supply and fixing in replacement of hand wheel or as per exiting sample/ model for actuator suitable for 80mm to 200mm dia butterfly valve as per exiting sample/ size

1

249

-

... More
Supply & laying of cable in trenches/ at walls/ over roof etc with proper clamp and other fixing sccessories and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor cable of size 25 sqmm 4.0 core including taking out of old cable. complete all as specified and directed.

140

249

-

... More
Supply & laying of cable in trenches/ at walls/ over roof etc with proper clamp and other fixing sccessories and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor cable size 10 sqmm 4.0 core including taking out of old cable complete all as specified and directed.

90

249

-

... More
Excavation in trenches not exc 1.50 metre wide and not exc 1.50 metre deep in any type of soil and getting out complete all as specified and directed by Engineer-in-Charge.

10

249

-

... More
Returning filling in, including spreading leveling, watering and well ramming in layers not exc 25 cm all as specified and as directed by Engineer in Charge..

9

249

-

... More
Removal of excavated soil surplus to the requirement to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point.

1

249

-

... More
Sand filling in and arround LT cable 8cm thick below and 15cm above the cable respectively after laying the cable gently punning down complete all as specified and dircted. Note :- Punned thickness shall be measured for payment purpose).

3

249

-

... More
M&L for laying of bricks of common burnt clay, sub class-B for LT underground cable protection, all as specified

350

249

-

... More
Taking down copper/aluminium point wiring (light, fan socket or power) complete including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets light fittings etc and removing from site and making good disturbed surfaces of wall, floor etc.

61

249

-

... More
Material and labour for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked, in & including PVC surface casing and caping including 1.5 Sq mm (nominal area) FRLS, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked as earth wire, connecting to common earth dolly with thimble, including MS sunken box, blanking plate etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / bell point/exhaust point controlled by one, one way switch 06 Amps complete all as directed. Note - All accessories hylum sheet cover plate, Metal flush box, screws, as applicable will be included in quoted rates.

20

249

-

... More
All as per srl item No. 189 here in before but point wiring for one socket outet point 3 pin 5 amps on the same board.

2

249

-

... More
All as per srl item No. 189 here in before but point wiring for one socket outet point 3 pin 5 amps on the independent board.

5

249

-

... More
All as per srl item No. 180 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 3/5 pin 15 Amp power point.

2

249

-

... More
Material and labour for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked, in existing conduit including 1.5 Sq mm (nominal area) FRLS, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked as earth wire, connecting to common earth dolly with thimble, including MS sunken box, blanking plate etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / bell point/exhaust point controlled by one, one way switch 06 Amps complete all as directed. Note - All accessories hylum sheet cover plate, Metal flush box, screws, as applicable will be included in quoted rates.

20

249

-

... More
All as per srl item No. 193 here in before but point wiring for one socket outet point 3 pin 5 amps on the same board.

2

249

-

... More
All as per srl item No. 193 here in before but point wiring for one socket outet point 3 pin 5 amps on the independent board.

5

249

-

... More
All as per srl item no. 193 here-in-before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for 3/5 pin 15 Amp power point on Independent board.

5

249

-

... More
S&F as in replacement Switch piano flush type, single pole, one way, 6 Amps complete all as specified and directed.

54

249

-

... More
S&F as in replacement socket type, two-in-one, 2&3 pin, 6 Amp universal type complete all as specified and directed.

14

249

-

... More
S&F as in replacement Switch piano type 15/16 Amp, single pole, one way type complete all as specified and directed.

7

249

-

... More
S&Fas in replacement Socket two-in-one, 15 & 5 Amp, multipurpose shutter type complete all as specified and directed.

7

249

-

... More
S&F as in replacement electronic fan regulator, step type complete all as specified and directed.

4

249

-

... More
Supply and fixing of Ceiling rose, PVC polycarbonate body 3 terminal, 240 volts, 5 Amps complete all as specified and directed.

40

249

-

... More
S&F in replacement PVC water tank cover for 10000 Ltr Capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed by Engineer In charge.

2

249

-

... More
Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary of tender documents.

-

-

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.