Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Special Repair To Bldg No P-234 (03 X Single Jcos Living) Of No 2 Inf Bn At Udaipur Mil Stn in Udaipur, Rajasthan, with an estimated contract value of Rs. 9,66,000. The bid opening date for this tender is 07-11-2026 and the last date for bid submission is 25-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - Rajasthan Tender

Opening Date7 Nov 2026
Closing Date25 Nov 2026
Tender Amount₹ 9,66,000 
Notes
Download

Costs

Description

Special Repair To Bldg No P-234 (03 X Single Jcos Living) Of No 2 Inf Bn At Udaipur Mil Stn

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Taking down steel windows with shutters area not exceeding 1.0 Sqm each, from wall fixing complete all as specified.

3

10

-

... More
Taking down steel ventilators with shutters area not exceeding 1.0 Sqm each, from wall fixing complete all as specified.

6

10

-

... More
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

159.6

10

-

... More
M&L for 7 to 8mm thick Non skid joint free coloured ceramic tiles area of each tiles exc 0.11 Sqm but n.exc 0.18 Sqm laid over 15mm thick bedding layer in CM 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match.

12.1

10

-

... More
Material & Labour for vitrified Ceramic dark shade/double charged/ultracharged 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exc 0.42 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

88

10

-

... More
All as per above but in skirting to walls including 10mm thick cement plaster in ement mortar 1:4 as backing coat on fair faces on stone surface all as specified and directed.

5.5

10

-

... More
M&L coloured glazed ceramic tiles in vertical surface size 600x300x7-8mm thick laid over 10mm thick rendering coat in CM 1:3, set and jointed in neat cement and pointed in white or coloured cement to match. The dado of same finish as of flooring shall be flush with plaster & all edges properly mitered.

46

10

-

... More
Material & Labour for Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces and half nose moulding (bull nosing) etc, complete all as specified and directed.

2

10

-

... More
M&L 18 to 20 mm thick Black granite stone in single piece in steps stairs complete laid over 15mm thick rendering layer in CM 1:3 and jointed with white cement with admixture of pigment to match shade of granite stone including grinding and polishing complete and providing necessary holes for gas pipe / water supply pipe etc. complete all as specified and directed.

6

10

-

... More
Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level and removing material from site complete all as specified and directed.

3.6

10

-

... More
Material & Labour for 75mm thick Cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection with fair finished complete. Note : Joints 12 mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection.

36

10

-

... More
M&L 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in sub base complete all as specified and dirrected.

12

10

-

... More
M&L for Vitrified out door tiles 400x400x10-12 mm thick digital design set, jointed and pointed in neat cement slurry as in floors with grey cement over & including over screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6, complete all as specified and directed.

12

10

-

... More
Material & labour for fabrication of pressed steel cupboard shutter using 1mm thick MS plain sheet with frame 1.25mm thick bent to shape including two coat of synthetic enamel paint on internal surfaces & two coat of hammer tone finish on external surface alongwith locking arrangement mortice lock ,handle etc complete all as specified as per drg No CEJZ/TD/12/2008 sheet 1/3 to 3/3.

5.6

10

-

... More
Supply and fixing, made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 65 mm x 125 mm (moulded) having double rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by "Rajshri/Echon or Eq" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, all as per specifications drawings as directed,. Material test certificate and authentication should be compoulsory provided by the manufacturing company.

15

10

-

... More
S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type moulded door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N / m2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fie retardant WPC to be laminated with PVC foil of minimum 14 micron thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engr-in-Charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately).

5.28

10

-

... More
Supply and fixing IInd class (hollock) hard wood factory made 35mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed.

5.28

10

-

... More
Supply and fixing, made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 45 mm x 70 mm (moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by "Rajshri/Echon or Eq" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, all as per specifications drawings as directed,. Material test certificate and authentication should be compoulsory provided by the manufacturing company.

14

10

-

... More
Supply and fixing factory made solid PVC moulded door shutter with wood free EPS 28 to 30 mm thick (Stiles), with 2, 4, or 6 raised panel design with 2 mm thick moulded PVC sheet on the front page and 2 mm plane colour PVC sheet on back face supplying and fixing in frames at site as per speicfication and drawing.

3.5

10

-

... More
Supply & fixed 200 mm long aluminium anbodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

12

10

-

... More
Supply & fixed 150 mm long Extruded aluminium alloy handles, fabricated type anodised complete all as specified.

12

10

-

... More
Supply & fixed 100 mm butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed.

18

10

-

... More
S&F of 150 mm long stainless steel tower bolts of extruded section and fixed complete all as specified and directed.

6

10

-

... More
Providing and fixing 125mm long bright /matt finished Stainless Steel handles for bathroom doors of approved quality & make with necessary screws etc all complete

6

10

-

... More
S&F 100 mm long stainless steel butt hinges with galvanised MS hinge pin etc.

9

10

-

... More
S&F alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified.

3

10

-

... More
S&F double legged door stopper of overall length of cover plate 150 mm of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floors and rubber all as specified and directed by Engr-in-charge.

6

10

-

... More
Supply & fixed MS helical door spring 300 mm long fixed with screws to wooden chowkhats or fixed with welding to steel chowkhats.

3

10

-

... More
Supply & Fixing in repair aluminium 300mm long hat pegs of 6 Nos peg set of good quality complete all as specified and directed

6

10

-

... More
Supply and fixing (in repair) galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staple and including fixing with beads supplied with joinery when fixed in panels of joinery, complete all as specified.

10

10

-

... More
M&L for two coat of synthetic enamel painting to new wood surface of any description, not otherwise described over 10cm width or girth including preparation of new surfaces over a coat of pink primer complete all as specified and directed.

8

10

-

... More
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

0.5

10

-

... More
M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

0.5

10

-

... More
Supply & fixed Powder coated aluminium frame windows, ventilators, partition etc fixed/openable type or sliding without sash bar, aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clip,rubber packing, anodised aluminium snap beading, screw etc complete all as specified. Note :- minimum thickness of powder coating 50 micron.

18

10

-

... More
Supply and fixing powder coated anodised aluminium window shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

4.5

10

-

... More
Supply & fixed for anodised stainless steel grill of (anodised transparent or dyed to required shade according to IS:1868 with minomum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P. brass / stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised alumiinium standard section around the opening, all complete as per reuirement and direction of Engineer encharge.

1.2

10

-

... More
M&L for 5.5mm thick plain sheet glass, ordinary quality and glazing rubber beading in square exc 0.5 sqm in each pane complete

4.5

10

-

... More
Supply & fixed steel for 4mm thick figured glass, ordinary quality and glazing rubber beading in square nexc 0.5 sqm in each pane complete

1

10

-

... More
Supply & fixing in repairs stainless steel type curtain rod 22 to 25mm dia as per sample

13

10

-

... More
Supply & fixing of purpose made brackets trade pattern for stainless steel decorative type curtain rods suitable for holding 22 to 25mm dia as per sample as in repair.

21

10

-

... More
Supply & fixing of stainless steel decorative fincals(round type with mirror optic finish)trade pattern for decorative type curtain rods suitable for 22 to 25mm dia curtain rods as per sample as in repaie complete all as specified.

21

10

-

... More
Supply & fixing of stainless steel decorative fincals wall to wall trade pattern suitable for decorative type curtain rods 22 to 25mm dia as per sample as in repair complete all as specified.

3

10

-

... More
Demolition cement concrete in any position not other wise specifically provided for complete all as specified and as directed.

3.25

10

-

... More
Material and Labour for PCC 1:2:4 type B-0 using (12.5 mm graded stone aggregate) as in padding on roof top including WPC as per manufacturers instructions to achieve the slop required, with minimum thickness of 25mm consolidated and finished even and fair without using extra cement. (WPC shall be measured and paid separately

3.25

10

-

... More
M&L for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound as per manufacturer instructions on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed.

130

10

-

... More
Material and labour providing and applying roof treatment as folowing stages :- (i) Apply 1st coat of PU coating (ShaliUrethane LHM @ 650 gm/Sqm or eqivalent by brush/roller/spray. Spread non-woven geo-textile or glass fiber tissue of 45 GDM with overlaps of 50mm in both directions when the surface is still tacky, this is optional , to be assessed as per site requirements to acheive higher mechanical properties. (ii) Allow 1st coat to dry for 10-12 Hrs. (iii) Apply 2nd coat of PU membrane (ShaliUrethane LHM @ 650 gm/Sqm or eqivalent) as per manufacturer's instructions. Extend waterproofing treatment up to 200mm and terminate into groov on the parapet wall. (iv) Protect the applied liquid membrane bu sprinkling sand @ 200gm/Sqm over the final coating when the surface is still tacky to facilitate plastering and including 25mm thick plastering in CM 1:3 with admixture and WPC. Note 1 : Treatment shall be done through authrised representative of manufacturer's instructions.

130

10

-

... More
Supply & fixed 50mm bore LDPE (Low density Polyethylene Pipes) of pressure rating 6Kgf/Sqcm fixed complete to walls,ceilings or in floors including taking down of old GI tubing, 40 mm bore all as specified and directed.

4.5

10

-

... More
Supply and Fix in repairs Vitreous China wash basin, flat back, size 550*400mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets and vitreous china pedestal pattern complete. all as specified.

3

10

-

... More
S & F in repairs Brass CP mixer (Single lever) for WHB for mixing hot & cold water screwed down for iron/CPVC pipe and fixed with Connecting Legs & Wall Flanges, complete all as specified and as directed.

3

10

-

... More
Supply & fixed Polymer coloured (Polypropeylene Delrin and ABS) low level flushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet ball valve float valve bends brackets, rawl plug, brass screws handle etc complete having BIS derscription mark with 2731 with and including suitable size of MS brackets, plug, screws all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with Water closet of any type complete all as specified and directed.

3

10

-

... More
Supply and fixing , vitreous China squatting pan of Orrisa pattern size 580mmx440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and integral foot rests of any pattern complete including provision of lime concrete bedding, trap and connection to flush pipe complete all as specified.

2

10

-

... More
Supply and fixing in repairs vitreous china premium quality/1st quality wash down water closet pan (pedestal pattern), white (excluding flushing cistern & flush pipe) & incl 01 No ‘P’ or ‘S’ trap of dia 100mm including provn of lime concrete bedding, complete all as specified.

1

10

-

... More
Supply and fixing in repair plastic water closet seat cover with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointing complete.

1

10

-

... More
Supply and fixing in repair, bib tap two way screwed down high pressure, chromium plated,fancy type, ISI marked, with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified.

1

10

-

... More
Supply and Fixing health faucet (hand shower) (ABS body) with 1.2 mtr long flexible tube and wall hook etc complete all as specified & directed.

1

10

-

... More
Supply and fixing in repair, bib tap screwed down high pressure, cast copper alloy,fancy type, ISI marked, with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified.

2

10

-

... More
S & F in repairs for Brass CP Wall Mixer with Provision for Overhead Shower with 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flanges and for mixing hot & cold water screwed down for iron/CPVC pipe and fixed complete all as specified and as directed.

3

10

-

... More
Material & Labour for Green Marble 25cm x 25cm x 12-15 mm thick machine cut prepolished embedded for bathroom wall as corner shelf round shape all as specified and directed.

6

10

-

... More
S&F in repair brass chromium plated towel ring fixed including screws all as specified and directed by Engr-in-charge.

3

10

-

... More
S&F in repair brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges all as specified and directed by Engr-in-charge.

3

10

-

... More
S&F in repair rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position after dismantling (water tank of cap exc 250 ltr and n.exc 500 ltr) and removing to store and all as specified and directed by Engr-in-charge.

3

10

-

... More
S&F in repairs 15mm bore Gun-Metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

6

10

-

... More
S&F in repair PTMT ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore pipes all as specified and directed by Engr-in-charge.

3

10

-

... More
Supply & fixed in repair for 5.5mm thick looking mirror of selected quality, bevelled edge 600mmx450mm glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screw and cup washer, pvc beading & rubber packing complete all as specified.

3

10

-

... More
Supply and fixing Stop valve (angle cock) 15mm dia chromium plated, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or unions, complete all as specified. (Note : Weight of cock shall not be less than 0.575kg)

9

10

-

... More
Supply & fixed in repair PVC connections 45cm long including 15mm bore PTMT nuts on both ends complete all as specified.

9

10

-

... More
Supply & fixed in repairs stainless steel grating openable 100mm dia with/without hole including fixing with white cement complete all as specified.

3

10

-

... More
Supply & fixed in repair fancy type shower rose 125mm dia size of Rim and 30cm long CP brass pipe with swiwel joint complete all as specified.

3

10

-

... More
Supply & fixed in repair glass shelf assembly consisting of made out of 5.5 mm thick glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

3

10

-

... More
Supply & fixed in repair soap dish, vitreous china white, approximate size 160x160x90mm complete all as specified.

3

10

-

... More
Taking down cement plaster from brick walls/stone masonry walls, concrete surfaces including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.

95

10

-

... More
M&L for 10 mm thick rendering on stone masonry surfaces or surface other than fair face of brickwork finished fair and even without using extra cement in CM 1:6 for internal walls,complete all as specifed and directed.

30

10

-

... More
M&L for 15 mm thick rendering on stone masonry surfaces Plastering shall be carried out in two layers, 1st layer shall be 10mm thick plaster in CM 1:6, Second and final layer shall be 5mm thick in CM 1:4 finished fair and smooth mixed with integral water proofing compound for external walls, complete all as specifed and directed. Note : (i) WPC shall be measured and paid separately. (ii) Rendering upto 9 mtr ht shall be included in the quoted rate).

45

10

-

... More
M&L for 10 mm thick rendering in CM 1:3 over conc surfaces finished even & smooth as in ceilings, complete all as specifed and directed.

20

10

-

... More
Supply only liquid water proofing compound, ISI marked complete all as specified and directed.

1.5

10

-

... More
M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper (acrylic) white or tinted over a coat of 1 mm thick wall care putty, complete all as specified and directed.

30

10

-

... More
Material & Labour for preparation of new plastered surfaces of wall and applying two coats of weather coat over a coat of 1 mm thick wall care putty for neat and smooth finishing complete all as specified.

45

10

-

... More
Material & Labour for preparing new plastered surfaces and applying two coats white wash over a coat of 1 mm thick wall care putty on ceiling complete all as specified and directed.

20

10

-

... More
M&L for preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper (acrylic) white or tinted over a coat of priming over a coat of 1 mm thick wall care putty on walls upto tripple storeys bldg complete all as specified and directed.

200

10

-

... More
M&L for preparation of old plastered or un-plastered surface applying Three or more coats of 100% Premium acrylic emulsion paint (Weather Proof Paint) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

120

10

-

... More
Material and labour for preparation of old Plastered or un-plastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescence salts treating oil and greasy spots etc and applying two coat of white wash on ceiling surfaces complete all as specified.

90

10

-

... More
M&L for 10mm thick rendering on concrete surfaces of roof projection cornices & chajja etc finished fair and even without using extra cement including WPC in CM 1:4 incl taking down existing cement plaster and including necessary arrangements to work on roof projection, cornice & chajja etc. (WPC Measured separately)

20

10

-

... More
Taking up or down steel tubing and connections of 15mm bore including cleaning for refixing or removal to store provision for branch connection by inserting tee union elbow etc. complete all as required at site.

14

10

-

... More
All as item above but 20mm bore, complete all as specified.

12

10

-

... More
Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 16mm dia bore on walls/ceiling or laying in floors or fixing as in concealed to walls or in floors etc, and making good the surfaces matching to exsiting surfaces of walls/ floor to the entire satisfaction of Engineer-in-charge.

14

10

-

... More
Material & Labour Steel Tubes 20mm bore, 'medium grade', galvanised, with all fitting; laid in trenches and fixed complete to brick/stone wall or laid in floor concealed, complete all as specified and as directed..

9

10

-

... More
Refixing old steel tubing of 20mm bore and connections in new or old position (Walls, ceiling, floors, etc.

3

10

-

... More
Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out complete all as specified and directed.

20

10

-

... More
S&F 110mm dia UPVC (SWR) type 'B' pipe single sockets in any length with rubber ring joints, fixed to wall complete all specified and directed.

8

10

-

... More
S&F 110mm dia UPVC (SWR) type 'B' pipe single sockets in any length with rubber ring joints, laid in trenches or in floor complete all specified and directed.

6

10

-

... More
S&F 75mm dia UPVC (SWR) type 'B' pipe single sockets in any length with rubber ring joints, laid in trenches or in floor complete all specified and directed.

6

10

-

... More
S&F 110mm dia UPVC (SWR) bends any radius including cutting of holes.

3

10

-

... More
S&F 75mm dia UPVC (SWR) bends any radius including cutting of holes.

3

10

-

... More
S&F of 110mm dia UPVC (SWR) junction single, single (single 'T') equal or unequal.

3

10

-

... More
S&F 75mm dia UPVC (SWR) multi floor trap, with grating including jointing with solvant cement complete all specified and directed.

3

10

-

... More
Material and labour in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement including jointing to waste pipe fixed in cement concrete type-B-1 (1:2:4) using 12.5mm brick aggregate all as specified and directed.

3

10

-

... More
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

0.93

10

-

... More
Supply and fixing for mild steel framed work of angle or angle iron work as in fixing of cooler stand/Ladder by drilling/cutting the stone masonry wall and fixing up to 1st floor walls, other section of grade Fe-290-Gde E-165 with gusset plate rails, braces etc welded/drilled to fixing of steel sheeting or other covering doors etc. to be prepared for sliding or hanging with and including either hooks and hinges or steel hanging door fittings (exclusive steel sheeting or other covering, running rails & guides), complete all as specified and as directed by the Engr-in-Charge.

18

10

-

... More
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

75

10

-

... More
M&L for two coat of synthetic enamel painting to new steel surface of any description, not otherwise described over 10cm width or girth including preparation of new surfaces over a coat of red oxide primer complete all as specified and directed.

1

10

-

... More
Material & Labour 18/19mm thick block board, grade 1 quality exterior grade, commercial type fixed with screw to timber frame work including taking down complete all as specified and directed.

2

10

-

... More
Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fixture and fittings such as switches, light fittings,ceiling rose, pendent holders, bell, regulators and socket,light fittings etc .removing materials to store for keeping in safe custody or for taking credit and making good the disturbed surface & wall/ floor complete all as specified and directed.

48

10

-

... More
M&L for point wiring with PVC insulated unsheathed multi stranded FRLSH type copper conductor cable of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded FRLSH type copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly in and including PVC concealed conduit 25 mm dia medium grade ISI marked and its accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets, fan regulators for the following :- NOTE : minimum thickness of the MS sheet of sunken box should be 1mm . Make of wire Polycab ,RR kabel ,KEI, Finolex, Havells.

-

-

-

... More
(a) One light point controlled by one switch with cables 1.5 sqmm size.

21

10

-

... More
(b) One fan/ exhaust fan point controlled by one switch with cables 1.5 sqmm size.

6

10

-

... More
(c) One 3 pin socket outlet, 5 amps on the same board with other switches, with cables 1.5 sqmm size.

6

10

-

... More
(d)One light point controlled by two 2 - way switches, with cables 1.5 sq.mm size.

3

10

-

... More
(e) One 3 Pin socket oulet 5Amps on indepndent, with cables 1.5 Sqmm size

6

10

-

... More
(f) One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables1.5 sq.mm size. .

3

10

-

... More
(g) All as per item No. 2 here in before but with2.5 sqmm (for phase, neutral) and 2.5 sqmm (for continuous earth wire) cable for one 15/16 amp socket out let point on independent board.

6

10

-

... More
Note for item No 2 :- (i) Cutting chases for concealed conduit and making good in cement mortar is deemed included in unit rate.

-

-

-

... More
(ii) No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required.

-

-

-

... More
(iii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion.

-

-

-

... More
S&F modular switch 230/250 volts grade one way (as catered in point wiring above) of following rating :-

-

-

-

... More
Modular one way 6 Amp one module rating.Make : Legrand Arte Cat Part No 573400 , Havells(Murano)- ACUSXXW101, Schneider- X1001WH.

39

10

-

... More
Modular Bell push switch 6 Amp . 1 module rating. Make:- Havells(Murano)- ACUSBXW101, Legrand - 673404 , Schneider-X1005WH

3

10

-

... More
Modular one way 16 Amp one module rating. Make : Legrand Arteor Cat Part No 573410, Havells(Murano)- ACUSXXW161, Schneider-X1101WH

3

10

-

... More
All as per item No. 3 here in before but 2 way 6 Amp. Make:Legrand Arte Cat Part No 573402 , Havells(Murano)- ACMSXXW102 ,Schneider-X1002WH

6

10

-

... More
S&F modular socket out let shuttered type flush mounting type, 230/250 volts grade (as catered in point wiring above) of following ratings:-

-

-

-

... More
2/3 Pin 6 Amp combined 2 module type. Make:- Legrand.Cat Part No 573470, Havells(Murano)- ACUKXXW063, Schneider-X2005WH

12

10

-

... More
2/3 Pin 16 Amp combined 2 module type. Make : LegrandCat Part No 573471, Havells(Murano)- ACUKCXW163, Schneider- X2106WH

3

10

-

... More
Supply & fix Call bell ding dong AC 230 volt single pole complete all as specified. Make: Havells- AHLLXXR000 or equivalent in Legrand/Schneider.

3

10

-

... More
S&F ceiling rose 3 phase / PVC/polycarbonated, isolated body ISI Marked all as specified.

24

10

-

... More
S & F modular stepped type electronic fan regulator on the existing phenolic laminated sheet etc. as reqd.

3

10

-

... More
S&F lamp holder angle / batton type insulated body with back plate and to be fixed on PVC block. Including dismantling old one.

6

10

-

... More
S&F in replacement of LED Tube light of 20 watt 230 volt (approx size 4 ft) box type complete with LED tube light 20 watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size having min P.F>0.95, minimum efficacy 120 lumen/watt IP 20 rating complete all as specified. Make: Bajaj cat Part No BAJAJ BCLAB 20W CW LED XT, Crompton cat part No CCS-100-20-65-HL2-OP-NWH HE, Philips cat part No BN308C LED20S-6500 L120 PSU WH

9

10

-

... More
S&F in replacement of LED Tube light fitting 10 watt (approx size 2 ft ) white 230 Volt AC complete including connecting up with three core twisted flexible copper conductor cable having min P.F >0.95, minimum efficacy-100 lumen/watt, IP 20 rating all as specified. Make : Bajaj/Crompton/Philips

3

10

-

... More
M&L MCB SPN DB comprising of sheet metal enclosure double door suitable for mounting MCB 240 Volts with busbar 200 amps rated 12 way including dismantling old one.

1

10

-

... More
S&F RCBOs Double pole, 30mA 32 Amp rating for earth leakage, overload & short-circuit protection.

1

10

-

... More
Supply and fixing SPN 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

1

10

-

... More
Supply and fixing SP 6 to 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

8

10

-

... More
Taking down carefully, deposited to MES store and hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specfied and directed.

6

10

-

... More
Installation, Testing and Commissioning exhaust fan, steel/PVC body as per existing site, AC single Phase. 230V, 1200 RPM, Copper winding of 250mm size sweep with, blades, and frame and louvers, including making connection etc. as requried

3

10

-

... More
Material & labour for earthing complete with galvanised steel earth plate electrode 60x60cmx6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below the ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or of steel all as shown in electrical plate No 3 of SSR part-I 2009 connected to main switch board all as specified and testing on completion including. Necessary excavation, earthwork, PCC works and CI earth pit cover with watering pipe 20mm dia GI pipe medium grade, funnel with wire mesh and lugs and GI pipe 15 mm dia of light grade, for protection of earth lead complete all as specified and directed.

1

10

-

... More
Excavating in trenches n.exc 1.5 m width and n.exc 1.5m in depth for taking out cable and cable cover and getting out in any type of soil

3.9

10

-

... More
Returning, filling in, including spreading levelling, watering and well ramming in layers n.exc 25 Cm.

1.2

10

-

... More
Removing excavated materials n.exc 50 mtr depositing where directed at a level n.exc 1.5 m above the starting point

2.7

10

-

... More
M&L for spreading, levelling in layers n exc. 25 cm thick and ramming of sand cushioning to PVC/ XLPE cables with tibba sand and punning to provide required cover to UG cables. Note :- For the purpose of payment only punned thickness will be measured.

0.5

10

-

... More
Supply and laying reinforced precast concrete cable cover, class LV, type 1 flat, 250mm x 150mm x 40mm.

80

10

-

... More
Taking out old unserviceable protection pipe and supply and fix medium grade 50 mm dia GI pipe fix complete to wall , poles etc with suitable clamp for protection of cable complete all as directed.

6

10

-

... More
Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 25 sq mm 2.00 core in replacement.

20

10

-

... More
M&L for submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLSH type 1100V grade 2 x 4 sqmm complete drawn in new PVC concealed conduit of 25 mm dia and its accessories along with 1x 4 sqmm PVC insulated unsheathed copper conductor multi stranded FRLSH type cable for continuous earth wire and duly connected to common earth dolly all as specified and directed.Make- Polycab, KEI, RR KABEL, Finolex, Havells.

20

10

-

... More
S&F LED security light luminaries of 35 watt for energy saving having IP-65 degree of protection made of pressure die cast aluminum housing and heat resistant thoughned glass with excellent thermal management, LED's should have better optics and uniform distribution of light including GI tubing 40mm dia light grade 1.2 mtr long pipe bent to shape 120 degree for mounting of security light and fixed to wall/pole, with suitable MS clamps 2 Nos with nut and bolt and washers including connecting complete including 2.5 sqmm stranded copper conductor of suitable length as per direction and approved by Engr-in-charge,

3

10

-

... More
Taking down old Sheet metal enclouser and supply and fix new sheet metal enclouser cubical type factory fabricated made out of 1.6 mm thick CRCA sheet with front side openable single door system powder coated painted to shade RAL 7032, PL Gasket, hinged single door ,IP-55 mounting plate made out of 2mm thick CRCA sheet steel and earth bolts etc. of size 400x400x200mm and making good finishes around the DB with cement and paint with existing colour all as speceified & directed by Engr-in- charge. Note :-- Cost of any minor modification if required in fixing of the sheet metal enclouser as per site requirement and making good the disturbed surfaces matching with existing finish, will be deemed to be included in the cost of this item.

1

10

-

... More
S&F LED lamp 9W system lumen (NOM) 600 with all accessories all as specified and directed by Engr-in-Charge.

6

10

-

... More
Taking down carefully, depostied to MES store and fix at the smae place electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25/50 litre as existing complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

3

10

-

... More
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

3

10

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.