Military Engineer Services Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 97,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_696813_1Tender No
8921E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
REPAIR/ MAINTENANCE OF TRANSFORMER AND EXTRA HIGH VOLTAGE 33 KV ELECTRIC SUB STN AND CONNECTED WORK AND LT PANEL, BUS BAR AND OTHER ALLIED WORKS IN SOUTHERN SECTOR AT MIL STN KOTA
REPAIR/ MAINTENANCE OF TRANSFORMER AND EXTRA HIGH VOLTAGE 33 KV ELECTRIC SUB STN AND CONNECTED WORK AND LT PANEL, BUS BAR AND OTHER ALLIED WORKS IN SOUTHERN SECTOR AT MIL STN KOTA
REPAIR/ MAINTENANCE OF TRANSFORMER AND EXTRA HIGH VOLTAGE 33 KV ELECTRIC SUB STN AND CONNECTED WORK AND LT PANEL, BUS BAR AND OTHER ALLIED WORKS IN SOUTHERN SECTOR AT MIL STN KOTA
BOQ Items
... More
Removing excavated material (soil) n exc. 50m distance and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed.
154
-
-
... More
M&L dry river clean Sand filling in trenches around underground cables for earth cushion, complete all as specified and directed. (Depth of sand shall be measured after punning).
82.8
-
-
... More
M & L for hardcore broken stone or boulders aggregate of size 25 to 40 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface at 4 Pole, 2 Pole strucutres and other E&M Installations complete all as specified and directed.
40
-
-
... More
M&L for trenchless boring under road/hard standing & including making good as per the existing complete all as directed. Note :- GI pipe shall be measured and paid separately under respective item of this BOQ.
5
-
-
... More
Supplying and laying in renewal of un-reinforced precast concrete cable cover, class HVP, type 1 with peak, size 300mm x 180mm x 40mm laid dry and flat adjoining each other over sand cushion in trenches as protection to UG cable, complete all as specified and directed.
400
-
-
... More
M&L for pulverized fuel Ash-lime bricks (Fly ash bricks - non modular size), class 10, laid dry and flat adjoining each other over sand cushion in trenches as protection to UG cable, complete all as specified and directed.
9
-
-
... More
M&L for taking down old existing serviceable XLPE cable of size 70 to 185 Sqmm 3.5 core from trenches, culvert, road and re-routing, re-laying and reconnecting, testing the same in existing location or any other location, complete all as specified and directed.
Note :- Excavation & earth work , GI pipe for laying of cable, sand cushioning, cable protection cover shall be measured and paid for seprately under respectiv items of the BOQ.
550
-
-
... More
Supply and fixing in renewal of HT cable/route indicator cast iron of suitable size along HT cable trench including planting in ground with proper PCC complete all as specified and directed. Note :- Cost of pcc shall be included in the rate quoted.
5
-
-
... More
Supply and fixing in renewal of danger notice plate of 1.6 mm thick mild steel sheet vitreous enanelled white of size 20 x25 cm with figures letters and conventional skull bones in signal red colour and fixed with mild steeel clamps made of flat iron nuts bolts and washers etc for HT poles with voltage and danger indicated in hindi and english and local vernacular complete all as specified and directed.
5
-
-
... More
Disconnecting defective outdoor/ indoor distribution transformer of various size from HT/LT sides taking out complete transformer oil storing the same in suitable containers (to be arranged by contractor) opening the top cover, lifting up the core assembly carefully to check the condition of transformer winding core retanking the same after repair refilling the transformer oil after dehydration and filteration (dehydration and filteration to be paid separately) inluding checking of leakage of transformer body and welding works required for making transformer body leak proof transportation of transformer to and from site to work shop and re-installation the same at any site as directed by Engr-in- charge for capacity of transformer 50 KVA to 200 KVA.
2
-
-
... More
Description ditto all as per srl item No -13 (here-in-before) but of capacity 250 KVA and upto 500 KVA. Note for srl item Nos .13 & 14 :- (i) The other materials required for rectification of defects such as transformer oil, bushes, bush rod etc. shall be measured and paid separately under respective item of this sch.
2
-
-
... More
M & L for replacement of burnt /defective HT & LT copper coil with new made out of super enamelled high quality copper wires of matching size to the existing one complete all as specified and directed.
600
-
-
... More
M & L for replacement of existing defective HT tap changer of suitable size with tapping arrangement 2.5% to 7.5% and one normal tapping including connecting up with HT coil and testing of transformer 11/0.415 kV capacity up to 500 KVA complete all as specified and directed.
1
-
-
... More
M & L for servicing/ over hauling including greasing of HT Tap chnager and with tapping arrangement 2.5% to 7.5% and one normal tapping including connecting up with HT coil and testing of transformer capacity up to 500 KVA complete all as specified and directed.
6
-
-
... More
M & L for replacement of existing defective drain out oil outlet valve of any type & size suitable for outdoor/ indoor transformer type complete all as specified and directed.
4
-
-
... More
M & L for replacement of transparent type silica gel breather assy of suitable size of transformer capacity upto 500 KVA connected to air column with conservator tank complete all as specified and directed.
15
-
-
... More
Supply and fixing in renewal of transformer oil temperature gauge 0 - 100 graduated Analogue dial type comlpete all as specified & as directed.
5
-
-
... More
Dismantling and opening transformer tank cover removing of worn out transformer oil tank gasket and supply & fixing of new rubberised gasket sheet 6.0 mm thick and to be pasted using gasket adhesive for the following transformer including refixing the top cover with conservator tankfor transformer capacity up to 200 KVA complete all as specified and directed.
2
-
-
... More
Description ditto all as per srl item No -21 (here-in-before) but in transformer capacity above 200KVA and upto 500 KVA complete all as specified and directed.
2
-
-
... More
M & L for replacement of defective/ cracked HT porcelain bushing (set of three) of suitable size for transformer upto 500 KVA including washers of good quality complete all as specified and directed.
4
-
-
... More
M & L for replacement of defective/ cracked LT porcelain bushing (set of four) of suitable size of transformer upto 500 KVA including washers of good quality complete all as specified and directed.
4
-
-
... More
M & L for replacement of defective/ wornout HT bush rod (set of three) made out of copper with brass nutsand washers of required length including connecting up with HT coil of transformer upto 500 KVA complete all as specified and directed.
4
-
-
... More
M & L for replacement of defective/ wornout LT bush rod (set of four) made out of copper with brass nutsand washers of required length including connecting up with LT coil of transformer upto 500 KVA complete all as specified and directed.
4
-
-
... More
Supply and filling as in replacement of silica gel inside the breather assembly and fixing properly with transformer complete all as specified and directed.
35
-
-
... More
Cutting off worn out aluminium cable ternimal lugs from the LT cable and S & F of new aluminium cable lugs of suitable size and reconnecting the cable with transfrormer, terminal stud including dressing of cable, excavation & surface dressing after providing sand cushioning and brick protection complete all as specified and directed.
25
-
-
... More
Dehydration and filteration of existing transformer oil using transformer oil filteration plant to eliminate foreign particles and to improve di-electric strength upto 50 KV at 2mm electrode gap and to bring the acidity within the permissible limit complete all as specified and directed.
Note :- Dehydration & filteration shall be done by using vehicle mounted setup cosisting of heating, filteration machine etc and oil shall be filtered/dehdrated in a closed circuit.
23000
-
-
... More
Supply & filling transformer oil for topping up/refilling the oil having dielectric strength 40-60 KV during filling after initial filteration complete all as specified and directed.
500
-
-
... More
Filling only transformer oil for topping up/refilling the oil having dielectric strength 40-60 KV during filling after initial filteration complete all as specified and directed.
1950
-
-
... More
M/L for painting of transformer up to 200 KVA capacity with good quality synthetic enameled paint using spray gun with compressed air on complete external portion of transformer including preparation of surface by scrubbing, cleaning ,stains greasy spots, dusts etc, The painting of transformer shall be carried out in situ ie. on four pole structure or in sub station at different places complete all as specified and directed.
5
-
-
... More
Description ditto all as per srl item No 32 here in before but for capacity above 200 KVA up to 500 KVA complete all as specified and directed.
5
-
-
... More
Supplying, laying, jointing, testing and commisioning XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with
aluminium conductor, Cross Sectional area of cable 185 Sq mm 3.5 core, 11000 volts Earthed grade (ISI marked), laid in trenches / ducts / encased in GI pipe / fixed to pole/wall with necessary angle iron support, clamp, nut , bolts etc and including taking down of old unserviceable existing UG cables complete all as specified and directed.
Notes :- (i) Excavation, earth work, sand cushioning, cable protection cover & GI pipes shall be measured and paid for separately under respective items of BOQ. (ii) Quoated rate shall be deemed to be inclusive of connecting up with control gear including cable glands and cable lugs.
60
-
-
... More
M&L for cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of following size & including excavation in any type of soil/strata, taking out cable & making disturbed surface after relaying the cable making joints suitable for aluminium conductor of following size complete all as specified and directed :- Note:- Unserviceable joint shall be replaced within 24 Hrs after intimation of failure & documentary proof kept in record duly signed by the Enginner-in-Charge for the same. A penalty of Rs. 1500 per day shall be imposed on contractor, if not attended timely.
-
-
-
... More
Cable of size 50 sqmm to 95 sqmm
1
-
-
... More
Cable of size 120 Sqmm to 185 Sqmm
1
-
-
... More
Cable of size 240 Sqmm to 300 Sqmm
1
-
-
... More
Cable of size 400 Sqmm
1
-
-
... More
M&L for Cable jointing kit for 11 KV (Earthed) grade cable for straight through cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor of following size & including excavation in any type of soil/strata, taking out cable & making disturbed surface after relaying the cable making joints suitable for aluminium conductor of following size complete all as specified and directed :- Note:- Unserviceable joint shall be replaced within 24 Hrs after intimation of failure & documentary proof kept in record duly signed by the Enginner-in-Charge for the same. A penalty of Rs. 1500 per day shall be imposed on contractor, if not attended timely.
-
-
-
... More
Cable of size 50 sqmm to 95 sqmm
1
-
-
... More
Cable of size 120 Sqmm to 185 Sqmm
1
-
-
... More
Cable of size 240 Sqmm to 400 Sqmm
1
-
-
... More
M & L in renewal for HT lightning arresters expulsion type complete all connecting lead with all fittings, transmission class, discharge capacity 30 kilo amp Suitable for 11000 volts complete all as specified and directed.
10
-
-
... More
M & L in renewal for HT lightning arresters expulsion type complete all connecting lead with all fittings, transmission class, discharge capacity 65 kilo amp Suitable for 33000 volts complete all as specified and directed.
1
-
-
... More
Supplying and laying synthetic Rubber insulated mats 2.5 mm thick for voltage upto 11 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m complete all as specified and directed.
10
-
-
... More
M & L in renewal of HT jumpering from HT 4/2 pole structure to bus bar to GOD 3 Nos with HT cable 95 sqmm not less than 3 mtr complete including connector and lugs of suitable size with provision of Nuts & bolts washer etc complete all as specified and directed.
10
-
-
... More
M& L for Servicing & calibration of HT 33 KV VCBs including, cleaning, lubrication/greasing of the mechanical parts including test of IR values, healthy check, injection testing, calibration, repair/replacement of minor defects in mechanical linkage like gears, etc and reconnection in all respect, all as per existing arrangement and restore the supply complete all as specified and directed.
5
-
-
... More
M & L for replacement of defective/ cracked porcelain bushing (set of three) of suitable size of transformer 33/11 KV upto 3.15 MVA including washers of good quality complete all as specified and directed.
1
-
-
... More
M & L for replacement of defective/ wornout HT bush rod (set of three) made out of copper with brass nuts and washers of required length including connecting up with HT coil of power transformer (33/11 kV) upto 3.15 MVA complete all as specified and directed.
1
-
-
... More
M & L for painting of power transformer up to 3.15 MVA capacity with good quality synthetic enameled paint using spray gun with compressed air on complete external portion of transformer including preparation of surface by scrubbing, cleaning ,stains greasy spots, dusts etc, The painting of transformer shall be carried out in situ ie. on four pole structure or in sub station at different places complete all as specified and directed.
1
-
-
... More
M & L in renewal of numerical control over current earth fault IDMT relay CGI-14No crompton or equivalent, suitable for the existing VCBs complete all as specified and directed.
1
-
-
... More
M & L in renewal of Master trip relay suitable for 24 Volt DC Supply crompton CGXH1 or equivalent, suitable for the existing VCBs complete all as specified and directed.
1
-
-
... More
M & L in renewal of auxiliary relay suitable for 24 Volt DC Supply, Crompton CGXH1 or equivalent, suitable for the existing VCBs complete all as specified and directed.
1
-
-
... More
M & L in renewal of battery backed Power pack unit suitable for input 230 AC Supply and able to supply 24V DC supply complete all as specified and directed.
1
-
-
... More
M&L for paint for MS structure of 33 kV main receiving station and preparing surface for painting by removing rust using sand paper & applying two coat of aluminium paint over a coat of suitable primer upto full surface area including MS clamps, cross arms, bracings etc all as directed at site complete all as specified and directed.
40
-
-
... More
S & F in renewal for laying of XLPE insulated (heavy duty) armoured Copper conductor electric control cable 1100 volt of 2.5 Sqmm 04 core complete all as specified and directed.
30
-
-
... More
M & L for servicing & greasing of 33 kV Isolators for smooth operation complete all as specified and directed.
4
-
-
... More
M & L for performing all the routine/safety tests of power transformer incl Insulation test, Ratio test, Magnetic balance test, Test on all protection relays, test on operation and stability of earth fault relays, test on over current relays, trippling tests, buchholz relay trippng & alarmtest, alarm & tripping test of OTI, WTI, including calibration/setting of relays and submission of reports complete all as specified and directed. The the test shall be carried out by the OEM/auth rep of the OEM. Note :- Test report shall be submitted at the time of billing duly signed by company or its authrised dealer/Rep.
3
-
-
... More
M & L for disconnecting of defective station transformer (outdoor type) 33KV/0.433 kv Copper/ Aluminium wound from power mains and dismantling the same from 2/4 pole structure/ platform mounted and transporting the same to authorised workshop and opening the transformer cover, draining out of transformer oil and keep safely for reuse after filtration, assembling, removing of the burnt parts ie tape, paper insulating strings etc gently and carefully, washing of the dust, rust and dirt from all parts including taking out HT/LT leg coil core tank and cooling tubes, painting the inner side tank by zinc chromate paint and preparing the same for re-assembling after carrying out required repair and installation on existing 2/4 pole structure/ platform with necessary fixing arrangement including connecting up electrically, commissioning and testing complete all as specified and directed.
1
-
-
... More
M & L in renewal for cuurent transformer suitable for 33 kV (CT) having primary current 150-75 Amperes, phase-I, insulation class-A cpmpliance to IS-2705/1992 standard complete all as specified and directed.
1
-
-
... More
M & L in renewal for potential transformer suitable for 33 kV (PT) having primary voltage of 33000 V and secondary 110 V, phase-I, insulation class-A cpmpliance to IS-2705/1992 standard complete all as specified and directed.
1
-
-
... More
M & L in repair for construction of platform for power transformer of size 6000mm x 5000mm x 0.9m with stone masonery in foundation, platform and 100mm thick RCC M-30 grade slab, with 10 mm MS TMT bars 120mm c/c on bothway, brick masonary steps on one side & including making provision for entry and exit of HT/LT cables and steps made to access to the top of plateform including plastering to all structure complete including painting with 2 coats of whitewash on plastered surface complete all as specified and directed.
1
-
-
... More
Dismantling of power transformer 33/11 KV, 3.15 MVA from old existing platform by means of crane/lifter, placing it at safe place inside 33 KV yard, refixing the same transformer to newly constructed platform all as per existing arrangement with CT, PT & earthing etc. and dehydration, filteration, testing and commmsioning complete all as specifed & directed.
Note :- (i) Dehydration, filteration and testing of transformer shall be measured & paid under respective item of schedule.
(ii) Any damage to Power Trf during dismantling & refixing shall be contractor's responsiblity and cost of damge of same shall be borne by contractor.
1
-
-
... More
Supply, straining, streching and fixing ACSR conductor on HT/LT poles or on existing poles including binding and jointing to conductor/ insulator with and including suitable size of copper binding wire or aluminium tape and testing & including dismantling of ACSR conductors from the poles, complete all as specified and directed.
0.3
-
-
... More
M&L for earthing with galvanized steel earth plate electrode of size 600 mm x 600mm x 6.0 mm, buried directly in ground (earth plate not less than 2.25 Mtr below normal ground level) connected to galvanized iron earth wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron including 15 mm bore light grade GI tubing for protection of earth wire, MS sheet metal funnel with wire mesh, watering pipe medium grade 20 mm bore, charcoal or coke and common salt in alternative layer of 15 Cm compacted thickness all around the electrode with concrete earth pit of PCC 1:3:6 type 75 mm thick precast RCC (1:2:4) type B1 pit cover reinfored with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar and necessary excavation, earth work, in soft/loose soil and disposal of spolis to a distance not exc 50 Mtr and necessary connection and testing complete all as shown in electrical plate No. 3 and including dismantling of old u/s earthing complete all as specified and directed.
Notes: - (a) Irrespective of whatever is shown in plate No 3 of SSR, earth pit shall be casted in PCC (1:3:6) type C-1 and precast cover of RCC (1:2:4) type B-1 with suitable handle. (b) Item includes the cost of GI pipe for protection of earth wire and earth wire upto 7.5m.
3
-
-
... More
M&L for Earthing with galvanized steel earth plate electrode of size 600 mm x 600mm x 6.0 mm, buried directly in ground (earth plate not less than 2.25 Mtr below normal ground level) connected to galvanized earth strip of 25x4 mm dia by means of bolts, buts, check nuts and washers of galvanized iron on steel including 50 mm bore light grade GI tubing for protection of earth strip, MS sheet metal funnel with wire mesh, watering pipe medium grade 20 mm bore, charcoal or coke and common salt in alternative layer of 15 Cm compacted thickness all around the electrode with concrete earth pit of PCC 1:3:6 type 75 mm thick precast RCC (1:2:4) type B1 pit cover reinfored with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar including GI earth strip of 32x6 mm size for extension of earth lead and necessary excavation, earth work, in soft/loose soil and disposal of spolis to a distance not exc 50 Mtr and necessary connection and testing complete all as shown in electrical plate No. 3 and including dismantling of old u/s earthing complete all as specified and directed.complete all as specified and directed. Notes: - (a) Irrespective of whatever is shown in plate No 3 of SSR, earth pit shall be casted in PCC (1:3:6) type C-1 and precast cover of RCC (1:2:4) type B-1 with suitable handle. (b) Item includes the cost of GI pipe for protection of earth wire and earth lead strip upto 7.5 m.
19
-
-
... More
M&L for Earthing with galvanized steel earth plate electrode of size 600 mm x 600mm x 6.3 mm, buried directly in ground (earth plate not less than 2.25 Mtr below normal ground level) connected to galvanized earth strip of 32x6 mm dia by means of bolts, buts, check nuts and washers of galvanized iron on steel including 50 mm bore light grade GI tubing for protection of earth strip, MS sheet metal funnel with wire mesh, watering pipe medium grade 20 mm bore, charcoal or coke and common salt in alternative layer of 15 Cm compacted thickness all around the electrode with concrete earth pit of PCC 1:3:6 type 75 mm thick precast RCC (1:2:4) type B1 pit cover reinfored with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar including GI earth strip of 32x6 mm size for extension of earth lead and necessary excavation, earth work, in soft/loose soil and disposal of spolis to a distance not exc 50 Mtr and necessary connection and testing complete all as shown in electrical plate No. 3 and including dismantling of old u/s earthing complete all as specified and directed.complete all as specified and directed. Notes: - (a) Irrespective of whatever is shown in plate No 3 of SSR, earth pit shall be casted in PCC (1:3:6) type C-1 and precast cover of RCC (1:2:4) type B-1 with suitable handle. (b) Item includes the cost of GI pipe for protection of earth wire and earth lead strip upto 7.5 m.
5
-
-
... More
M&L for Chemical earthing with copper earth plate 90x60cmx5mm buried directly into ground vertically (earth pit not less than 5.0 mtr deep below normal ground level) ,with top edge of the plate not less than 4.0 mtr below normal ground level,connecting to copper earth trip 32x6 mm as earthing strip by means of copper lugs, bolts, nuts, check nuts and washers protected with and i inclding 80 mm dia light grade GI pipe in floor and fixed with wall with proper sizeof MS clamps, including necessary excavation and earth work,magnesium sulphare (80 KG), charcoal (4 Qtl), and common salt (4 Qtl) filling watering arrangement with 20 mm GI pipe medium grade including PCC pit with precast RCC (1:2:4) cover, GI funnel with test point , complete inlcuding testing and conncetion of earth strip with electrical machine and necessary excavation, earth work, in soft/loose soil and disposal of spolis to a distance not exc 50 Mtr and necessary connection and testing complete all as shown in electrical plate No. 3 and including dismantling of old u/s earthing complete all as specified and directed.complete all as specified and directed. Note. (i) On testing, if desired result is not obtained, earhing will rejuvented at no eatra cost till the desired earth resistance is obtained. (ii) Item includes the cost of GI pipe for protection of earth strip and for watering. (iii) The unit rate shall also include for excavation, earth work in PCC (1:3:6) type C1 pit, RCC pit cover.
2
-
-
... More
S&F in renewal of earth continuity conductor or main earthing lead 4mm dia galvanised iron or steel wire fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required complete all as specified and directed.
20
-
-
... More
S&F in renewal of earth continuity conductor or main earthing strip/lead 32x6mm galvanised iron or steel wire fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required complete all as specified and directed.
50
-
-
... More
S&F in renewal of galvanised iron earth strip of size 25x4 mm, fixed to wall or pole, complete all as specified and directed.
30
-
-
... More
S&F in renewal of 40 mm bore steel water tubing, light grade, galvanised, with all fitting, laid in trenches/fixed to walls/poles etc as protection to cables, with and including necessary MS clamps, nuts botls, washers etc required for fixing, complete all as specified and directed.
60
-
-
... More
S&F in renewal of 50 mm bore steel water tubing, light grade, galvanised, with all fitting, laid in trenches/fixed to walls/poles etc as protection to cables, with and including necessary MS clamps, nuts botls, washers etc required for fixing, complete all as specified and directed.
25
-
-
... More
S&F in renewal of 80 mm bore steel water tubing, light grade, galvanised, with all fitting, laid in trenches/fixed to walls/poles etc as protection to cables, with and including necessary MS clamps, nuts botls, washers etc required for fixing, complete all as specified and directed.
28
-
-
... More
S&F in renewal of 100 mm bore steel water tubing, light grade, galvanised, with all fitting, laid in trenches/fixed to walls/poles etc as protection to cables, with and including necessary MS clamps, nuts botls, washers etc required for fixing, complete all as specified and directed.
20
-
-
... More
Laying/ fixing, jointing, testing and commissioning of LT under ground cable 1100 volts grade XLPE (cross linked polythene) insulated & PVC sheathed cable heavy duty armoured, with multistranded aluminium conductor laid in trenches/ ducts/ pipes/fixed on walls/poles with proper size saddles and clamp and including taking down of old unserviceable existing UG cables complete all as specified and directed for following cross sectional areas of cables :- Notes for Srl item Nos. 70.00 & 70.10 :- (a) Excavation & earth work , GI pipe for laying of cable, sand cushioning, cable protection cover shall be measured and paid for seprately under respectiv items of the schedule. (b) Cable shall be issued under Schedule 'B' free for fixing/laying. (c) Road cutting involved during excavation for laying of cables etc shall be made good as per existing road. Nothing extra shall be admissible on this account. Quoted rates of the item shall be inclusive of the above provisions.
(d) Quoated rate shall be deemed to be inclusive of connecting up with control gear including cable glands and cable lugs.
Cross Sectional area of cable 185 Sq mm 3.5 core
350
-
-
... More
Cross Sectional area of cable 150 Sq mm 3.5 core
200
-
-
... More
Supplying, laying, jointing, testing and commisioning XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with multistranded aluminum conductors, 1100 Volt grade (ISI marked), laid in trenches / ducts / encased in GI pipe / fixed to pole/wall with necessary angle iron support, clamp, nut , bolts etc and including taking down of old unserviceable existing UG cables complete all as specified and directed for following cross sectional areas of cables :- Notes for Srl item Nos. 71, 71.10 to 71.60 :- (i) Excavation, earth work, sand cushioning, cable protection cover & GI pipes shall be measured and paid for separately under respective items of BOQ. (ii) Quoated rate shall be deemed to be inclusive of connecting up with control gear including cable glands and cable lugs.
Cross Sectional area of cable 16 Sq mm 4 core
300
-
-
... More
Cross Sectional area of cable 25 Sq mm 4 core
300
-
-
... More
Cross Sectional area of cable 35 Sq mm 3.5 core
200
-
-
... More
Cross Sectional area of cable 50 Sq mm 3.5 core
150
-
-
... More
Cross Sectional area of cable 70 Sq mm 3.5 core
200
-
-
... More
Cross Sectional area of cable 95 Sq mm 3.5 core
150
-
-
... More
Cross Sectional area of cable 120 Sq mm 3.5 core
50
-
-
... More
Supply, transporting, erection and fixing steel tubular swaged pole, 9.00 metres long, type 410 SP-31, complete with cast iron base plate, pole cap, finial taper plug, bolts, nuts, washers etc including necessary earth work and excavation, PCC in foundation 1:3:6 type C2, using 40 mm graded stone aggregate and PCC 1:2:4 type B1, using 20 mm graded stone aggregate as in plinth block, disposal of surplus soil to a distance not exceeding 50 m, painting the pole with two coats of aluminium paint over one coat of red oxide primer including 3 nos band/straps with red post office box colour (300mm wide each) synthetic enamelled paint at a distance 300mm from plinth block and marking pole nos with black synthetic enamelled paint including tarring one coat on steel surface embedded in concrete & including taking down existing old unserviceable poles and complete all as specified and directed.
2
-
-
... More
M&L for painting the external exposed surfaces of steel tubular swaged/rail poles of 9.0 metres long alongwith cross arms, bracket and connected accessories with one coat of aluminium paint including preparation of old painted surfaces and writing the numbering/ details of the pole in white letters on black back ground and pasting 100 mm wide reflective red strickers in 3 lines around the pole, complete all as specified and directed.
115
-
-
... More
M & L for cutting of bushes and cleaning the area around the sub station & surface dressing n exc 10 cm deep & including two pole/four pole structures premises at southern sector and cutting the bushes, complete all as specified and directed.
1275
-
-
... More
M & L for trimming /cutting of tree branches to provide proper clearance around existing HT over head line with clearance of 3 mtr on both the sides from the centre of OH line all as per technical requirement & including removing of cut tree branches from site and depositing at places complete all as specified and directed.
50
-
-
... More
Restretching of existing aluminium conductor steel reinforced (ACSR) straining properly on insulators and binding with aluminium tape/binding wire connectors, PG clamps, jumpers etc, complete all as specified and directed for any size of ACSR conductor. Note:- Each ACSR conductor in a circuit will be measured & paid sepretely.
50
-
-
... More
S&F in renewal of aluminium lugs, properly crimping and taping different colours, complete all as specified and dircted for the following size of cables: -
185 Sqmm
10
-
-
... More
150 Sqmm
10
-
-
... More
120 Sqmm
10
-
-
... More
95 Sqmm
10
-
-
... More
50 Sqmm
10
-
-
... More
35 Sqmm
20
-
-
... More
25 Sqmm
20
-
-
... More
16 Sqmm
50
-
-
... More
S & F in renewal for MCCB, four pole, 415 Volts, 250 Amp, ultimate breaking capacity 36 KA, 50 Hz, AC and confirming to IEC: 60947- II /IS - 13947-II with adjustable thermal and adjustable magnetic setting, complete all as specified and directed.
1
-
-
... More
S & F in renewal for MCCB, four pole, 415 Volts, 160 Amp, ultimate breaking capacity 25 KA, 50 Hz, AC and confirming to IEC: 60947- II /IS - 13947-II with adjustable thermal and adjustable magnetic setting, complete all as specified and directed.
1
-
-
... More
S & F in renewal for MCCB, four pole, 415 Volts, 100 Amp, ultimate breaking capacity 25 KA, 50 Hz, AC and confirming to IEC: 60947- II /IS - 13947-II with adjustable thermal and adjustable magnetic setting, complete all as specified and directed.
1
-
-
... More
S & F in renewal for MCCB, four pole, 415 Volts, 63 Amp, ultimate breaking capacity 10 KA, 50 Hz, AC and confirming to IEC: 60947- II /IS - 13947-II with adjustable thermal and adjustable magnetic setting, complete all as specified and directed.
1
-
-
... More
Supply only electrical insulating tape roll of length 25 metre and width 20 mm having high performance strength and good adhesive characteristics, complete all as directed.
125
-
-
... More
S&F in renewal of bus bar chamber, 4 pole, factory made using CRCA sheet of 3.15 mm thickness and epoxy powder coated with locking arrangements, comprising of 4 Nos aluminium strip bus bars of adequate length, air insulated and PVC sheathed capacity 250 Amps rating with colour coding and mounted on porcelain insulators housed in a box of size 800x600x300 mm, including with provision of fixing incoming MCCB for addition & connection with LT cable with appropriate lugs and including angle iron stand of appropriate size complete all as specified and directed. Note :- Height of the angle iron stand must be 1.25m above the ground level to avoid water logging being low laying area.
5
-
-
... More
S&F in renewal of bus bar chamber, 4 pole, factory made using CRCA sheet of 3.15 mm thickness and epoxy powder coated with locking arrangements, comprising of 4 Nos aluminium strip bus bars of adequate length, air insulated and PVC sheathed capacity 400 Amps rating with colour coding and mounted on porcelain insulators housed in a box of size 800x600x300 mm, including with provision of fixing incoming MCCB for addition & connection with LT cable with appropriate lugs and including angle iron stand of appropriate size complete all as specified and directed. Note :- Height of the angle iron stand must be 1.25m above the ground level to avoid water logging being low laying area.
6
-
-
... More
S&F in renewal of bus bar chamber, 4 pole, factory made using CRCA sheet of 3.15 mm thickness and epoxy powder coated with locking arrangements, comprising of 4 Nos aluminium strip bus bars of adequate length, air insulated and PVC sheathed capacity 500 Amps rating with colour coding and mounted on porcelain insulators housed in a box of size 800x600x300 mm, including with provision of fixing incoming MCCB for addition & connection with LT cable with appropriate lugs and including angle iron stand of appropriate size complete all as specified and directed. Note :- Height of the angle iron stand must be 1.25m above the ground level to avoid water logging being low laying area.
6
-
-
... More
S & F in renewal of service wire of size 6 Sqmm 2 core of aluminium conductor PVC sheathed, confirming to latest IS/IEC complete all as specified and directed.
180
-
-
... More
S & F in renewal for electronic digital type Ampere meter, 0-150 Amp with selector switch upto 150 Amp of any size complete all as specified and directed.
10
-
-
... More
S & F in renewal for electronic digital type Voltmeter, 0-500 Volt with selector switch upto 500V of any size complete all as specified and directed.
10
-
-
... More
Disconnection of power supply from existing LT Panel of any type, disconnection of earth strips, cutting of the foundation angles/channels, removing of the panel from the site, including MS iron form work for raising the height of the panel upto the height as directed by the Engineer-in-Charge, including painting of LT panel complete with inner & outer with two coats of synthetic enamelled paint using spray painting machine, re-installation of panel, including repair to foundation of panel, restoration of power supply, including necessary excavation & earth work required for taking out & re-fixing the incoming and out going cables etc, complete all specified and directed. Note :- The MS form work deemed to be included in the quoted rate.
5
-
-
... More
M & L for repair to existing LT Panel of any type/ size, with cutting necessary worn out portion of MS sheet, angle iron and providing MS sheet of 2mm thick for renewal of rusted/broken LT panel door, MS angle iron of existing size and hinges to broken door, fixed with electric arc welding, providing external locking arrangement after taking proper electric shutdown, including rewiring by copper conductor control cables of suitable size, renewal of burnt out aluminium lugs and fixing with new lugs, nuts bolts etc, including painting of LT panel complete with inner & outer with two coats of synthetic enamelled paint using spray painting machine complete all specified and directed. Note :- Material such as MS sheet, angle iron, hinges deemed to be included in the quoted rate.
2
-
-
... More
Disconnection of electric connection from existing LT Panel/LT feeder pillars panel of any size, dressing of cable ends including repair of body of LT panel, repair/welding work of gates, hinges of the door including rewiring by copper conductor control cables of suitable size, renewal of burnt out aluminium lugs and fixing with new lugs, nuts bolts etc, including painting of LT panel complete with inner & outer with two coats of synthetic enamelled paint using spray painting machine & necessary welding work if required & including necessary excavation & earth work required for taking out & re-fixing the incoming and out going cables etc, complete all specified and directed.
3
-
-
... More
M&L for straight through jointing kits heat shrikable type LT UG XLPE cable heavy duty armoured sheathed & including excavation in any type of soil/strata, taking out cable & making disturbed surface after relaying the cable making joints suitable for aluminium conductor of following size complete all as specified and directed :-
-
-
-
... More
10 Sqmm to 16 Sqmm 4 core
10
-
-
... More
25 Sqmm to 50 Sqmm 3.5 core
10
-
-
... More
70 Sqmm to 120 Sqmm 3.5 core
7
-
-
... More
150 Sqmm to 185 Sqmm 3.5 core
5
-
-
... More
Supplying, installation, commissioning and testing (including CPRI type test certified) of outdoor type, weather proof, factory made LT feeder pillar box (Kiosk) of appropriate size (OR as per Indian Electricity Rules), protection class IP-65 made of 3.15 mm thick CRCA sheet duly powder coated, having double door opening (front & rear) with locking arrangement, provision of entry & exit CP brass glands for cables, having bus bar chamber with 4 No heat shrink insulated aluminium bus bar of 600 Ampere capacity and including all connection with aluminium busbar strip, provided with danger notice plate with skull & bone sign, including making all electrical incoming and outgoing electrical cable connection with new lugs, gland to be provided at cable entries and including 40x40x6mm thick angle iron frame work at the base of panel only for grouting purpose & necessary cement concrete 1:2:4 type B1 for grouting of panel stand and connecting the panel with existing earthing and including dismantling of old u/s existing panel comprising of the following: -
(A) INCOMING: - (a) Aluminium bus bar of rating 600 Amps for four pole - 01 Set
(b) MCCB, 4 pole, 415 volts, 50 Hz, AC, 400 Amp rating with rupturing capacity 36 KA microprocessor control type– 01 No.
(c) Electronic digital type Ampere meter, 0-500 Amp with selector switch upto 500 Amp & 3 Nos CT's ration 250/5 copper wound, square 96x96 mm - 01 No.
(d) Electronic digital type Volt meter, 0-500 volts, square 96x96 mm with selector switch - 01 No.
(e) Phase indicator LED type indicating lamp (RYB) with copper control wiring - 01 set of three.
(B) OUTGOING :- (a) MCCB, 4 pole, 415 volts, 50 Hz, AC, 160 Amp rating with rupturing capacity 25 KA adjustable thermal & adjustable magnetic settings mounted on din rail – 02 Nos.
(b) MCCB, 4 pole, 415 volts, 50 Hz, AC, 100 Amp rating with rupturing capacity 25 KA adjustable thermal & adjustable magnetic settings – 01 No.
(c) MCCB, 4 pole, 415 volts, 50 Hz, AC, 63 Amp rating with rupturing capacity 16 KA adjustable thermal & adjustable magnetic settings – 03 Nos.
Note :- (i) Necessary approval of drawings of LT feeder Pillars shall be approved by GE before placing order by the Contractor.
(ii) Height of the angle iron stand must be 1.25m above the ground level to avoid water logging being low laying area.
(iii) Cost of above aspects is deemed to be included in quoted rates.
2
-
-
... More
Supplying, installation, commissioning and testing (including CPRI type test certified) of outdoor type, weather proof, factory made LT feeder pillar box (Kiosk) of appropriate size (OR as per Indian Electricity Rules), protection class IP-65 made of 3.15 mm thick CRCA sheet duly powder coated, having double door opening (front & rear) with locking arrangement, provision of entry & exit CP brass glands for cables, having bus bar chamber with 4 No heat shrink insulated aluminium bus bar of 800 Ampere capacity and including all connection with aluminium busbar strip, provided with danger notice plate with skull & bone sign, including making all electrical incoming and outgoing electrical cable connection with new lugs, gland to be provided at cable entries and including 40x40x6mm thick angle iron frame work at the base of panel only for grouting purpose & necessary cement concrete 1:2:4 type B1 for grouting of panel stand and connecting the panel with existing earthing and including dismantling of old u/s existing panel comprising of the following: -
(A) INCOMING: - (a) Aluminium bus bar of rating 800 Amps for four pole - 01 Set
(b) MCCB, 4 pole, 415 volts, 50 Hz, AC, 630 Amp rating with rupturing capacity 50 KA microprocessor control type– 01 No.
(c) Electronic digital type Ampere meter, 0-500 Amp with selector switch upto 500 Amp & 3 Nos CT's ration 250/5 copper wound, square 96x96 mm - 01 No.
(d) Electronic digital type Volt meter, 0-500 volts, square 96x96 mm with selector switch - 01 No.
(e) Phase indicator LED type indicating lamp (RYB) with copper control wiring - 01 set of three.
(B) OUTGOING :- (a) MCCB, 4 pole, 415 volts, 50 Hz, AC, 250 Amp rating with rupturing capacity 36 KA adjustable thermal & adjustable magnetic settings mounted on din rail – 02 Nos.
(b) MCCB, 4 pole, 415 volts, 50 Hz, AC, 100 Amp rating with rupturing capacity 25 KA adjustable thermal & adjustable magnetic settings – 02 Nos.
(c) MCCB, 4 pole, 415 volts, 50 Hz, AC, 63 Amp rating with rupturing capacity 16 KA adjustable thermal & adjustable magnetic settings – 02 Nos.
(b) MCB, 415 volts, AC, three pole & neutral, 32 Amp, breaking capacity 10 KA – 02 Nos.
Note :- (i) Necessary approval of drawings of LT feeder Pillars shall be approved by GE before placing order by the Contractor.
(ii) Height of the angle iron stand must be 1.25m above the ground level to avoid water logging being low laying area.
(iii) Cost of above aspects is deemed to be included in quoted rates.
1
-
-
... More
S & F in renewal of the following items in APFC Panel : -
(A) INCOMING: - (a) MCCB, 4 pole, 415 volts, 50 Hz, AC, 200 Amp rating with rupturing capacity 36 KA adjustable thermal & adjustable magnetic settings– 01 No.
(b) Spreader ink TP DRX 250 - 02 Set
(c) Electronic digital type Ampere meter, 0-500 Amp with selector switch upto 500 Amp & 3 Nos CT's ration 250/5 copper wound, square 96x96 mm - 01 No.
(d) Electronic digital type Volt meter, 0-500 volts, square 96x96 mm with selector switch - 01 No.
APFC RELAY :- (i) 100mm 230 VAC cooling Fan - 01 No
(ii) 6 Amp SP 'C' (SB 201) MSC - 05 Nos
(iii) 4x4 PVC fan grill - 01 No
(iv) 200/5 A 5 VA ring 32x10 LT CT - 04 Nos
(v) 230 VAC Red, yellow & blue indication lamp - 01 Set
(iv) 4 stag 96x96 eta SMART APFC RELAY - 01 No
CAPACITOR BANK 25 KVAR - 04 Nos
(i) Green push button with element - 04 Nos
(ii) Red push button with element - 04 Nos
(iii) 6A SP 2 way rotary A/M selector switch - 04 Nos
(iv) 230 VAC green compact range indication lamp - 04 Nos
(v) 25 KVAr TP (30 KVAr) UA 30-30-10 cap duty contactor - 04 Nos
(vi) 50A TP 'C' (SB 203) MCB - 04 Nos
(vii) 25 KVAr 440V Heavy duty cylindrical capacitor - 04 Nos
Note :- Cost of above aspects is deemed to be included in quoted rates.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%