Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Provn Of Allied Works Services For Workshop At Op Location Of 175 Su At 5 Fbsu in Barmer, Rajasthan, with an estimated contract value of Rs. 61,48,800. The bid opening date for this tender is 19-10-2026 and the last date for bid submission is 23-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - Rajasthan Tender

Opening Date19 Oct 2026
Closing Soon23 Nov 2026
Tender Amount₹ 61,48,800 
Notes
Download

Costs

Description

Provn Of Allied Works Services For Workshop At Op Location Of 175 Su At 5 Fbsu

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
M&L forming construction joints 10mm wide and 30mm deep with using high RPM diamond bit cutter machine while concrete in green and filled with sealing compound Grade 'B' all as specified. complete all as per direction of Engineer-in-Charge.

58.9

-

-

... More
M&L forming contraction (dummy) joints 65mm deep and 10mm wide with using high RPM diamond bit cutter machine while concrete in green and filled with sealing compound Grade 'B' all as specified. complete all as per direction of Engineer-in-Charge.

24.45

-

-

... More
Provding and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour design & pattern as in footpath parks lowns drive ways or light traffic parking etc of requied strength, thickness & size shape, made by table vibratory mathod using PU monld, laid in required clolur & pattern over and inclding 50mm thick compacted bed fine sand compacting and proper embeddiing /laying of inter locking paver balocks into the sand bedding layer through vibratry compacton by using plate vibrator filling the joints with sand and cutting of paver blocks as per requird size and pattern finishing and sweeping extra sand.Complete all as specified and directed. .

265

-

-

... More
Provding and laying at or near ground lavel foctory made kerb stone of M-25 grade cement concrete in position to the requied line, line, level and corvture jointed with cement mortar 1:3 including making joints with or without grooves (thickness of joints except at sharp curve shapp not to more than 5mm) incl making drainage openign wherver required complete..Complete all as specified and directed.

7.8

-

-

... More
M&L for preparation of new or untreated concrete surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of primer , complete all as specified and directed.

65

-

-

... More
Demolition of pcc block/brick work or stone masonry, built in cement mortar, complete all as specified and directed.

8.5

-

-

... More
Demolition of un-reinforced cement concrete of any description and in any position not otherwise specifially provided. Complete all as specified and directed by Engineer-in-Charge.

10.799999999999999

-

-

... More
Dismantling of plain or corrugated steel sheeting any gauge, thickness incl nainital or simlar patttern roof coverings. Complete all as secified and directed by Engr-In-chage.

48

-

-

... More
Dismantling of wrought iron or mild steel work of any description not otherwise provided for . Complete all as secified and directed by Engr-In-chage.

4.8

-

-

... More
Removal of excavated material exc 1.5 Km & not exc 5 Km and depositing where directed at a level n exc 1.5 m above the starting point. Complete all as specified and by Engr-in-Charge.

10.799999999999999

-

-

... More
Demolition of un-reinforced cement concrete in floors or pavings n. exc. 15 cm thick (below or above ground level) complete all as specified and directed by Engr-in-charge.

7.9

-

-

... More
M&L for 25mm thick PCC 1:2:4 type B-1(using 20mm graded aggr) as in level course finished even and rough with out using extra cemet.complete all as specified and directed by Engr-in-charge.

158

-

-

... More
S&F for vitrified ceramic tiles 10mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) with providing of any dark colour border complete all as specified and directed by Engr-in-charge.

118

-

-

... More
S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6)complete all as specified and directed by Engr-in-charge.

40

-

-

... More
Dismantaling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

70

-

-

... More
M&L for coloured glazed ceramic tiles size 300 X 450 X 7-8mm thick on vertical surface over 10mm thick rendering in CM (1:4) as in dado/skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured complete all as specified and directed by Engr-in-charge.

70

-

-

... More
M&L for 18-20mm thick granite (of any type) work, table rubbed mirror and polished as in steps, jambs, pillars, window- cills, cooking platforms and like bedded over and including 20mm thick screed bed in CM (1:4) and pointing in white cement (1:2) using marble dust with admisture of pigment to match with shade of granite complete all as specified and directed by Engr-in-charge.

15

-

-

... More
Dismantling of cast iron or reinforced concrete drain pipes/PVC pipe 100/75mm dia and under any type, jointed in cement mortar and taking out of trenches if required .

18

-

-

... More
S&F CI soil waste vent and rain water pipe 75 mm bore (ISI Marked) in any length with or without ears with cement joint laid in floor/fixed to wall complete all as specified and directed.

10

-

-

... More
S&F CI soil waste vent and rain water pipe 100 mm bore (ISI Marked) in any length with or without ears with cement joint laid in floor/fixed to wall complete all as specified and directed.

8

-

-

... More
S&F 100mm bore bend (any radius) with duck foot or heel rest.

2

-

-

... More
S&F 75mm bore bend (any radius) with duck foot or heel rest.

2

-

-

... More
M&L for 15 mm bore GI tubing, medium grade with all fittings and fixed complete to walls with clamps, ceiling, floors or laid in trenches, concealed to wall/open to wall incl taking down old pipe. complete all as specified and directed by Engr-in-charge.

110

-

-

... More
M&L for 20 mm bore GI tubing, medium grade with all fittings and fixed complete to walls with clamps, ceiling, floors or laid in trenches with concealed to wall/open to wall incl taking down old pipe. complete all as specified and directed by Engr-in-charge.

65

-

-

... More
S&F in repairs 20 mm bore Gun metal, globe, gate valves/Ball valve high pressure with polythene float and fly nut complete screwed for iron pipe or for unions. complete all as specified and directed by Engr-in-charge.

10

-

-

... More
S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white with "P" or "S" Trap front or back inlet fixing bols, PVC seat cover closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and making all necessary connection complete as directed.

2

-

-

... More
S&F PVC low level fushing cistern 10 liters capacity including 32mm dia PVC down pipe,brackets etc complete all as specified and directed by Engineer-in-Charge.

2

-

-

... More
S&F in repairs vitreous china table top wash hand basin, size 490 x 390 x 110 mm mm white excluding taps, waste, chain and plug and porcelain stopper including brackets,cupling, complete all as specified and directed.complete all as specified and directed by Engr-in-charge.

5

-

-

... More
S&F in repair chromium plated long body/swan neck pillar tap 15 mm dia cast copper alloy with capstan head , screwed down high presure with or with out lettered fixed with iron pipe, complete all as specified and directed by Engr-in-charge.

5

-

-

... More
S&F in repair 600mm X 450mm (5 mm thick) looking mirror decorative type beading of any size of standard quality bevelled edge mounted on 6 mm thick ply wood and fixed with rubber plugs, screws, cup washers, complete all as specified and directed.

5

-

-

... More
S & F in repair angle/stop valves cast copper alloy chromium plated with long shank , screwed both ends for iron pipe 15mm bore, complete all as specified and directed by Engr-in-charge.

15

-

-

... More
S&F in repair Chromium Plated wall mixer for mixing Hot & cold water screwed down for iron pipe 15mm bore complete all as specified and directed by Engr-in-charge.

2

-

-

... More
S & F in repair bib taps (long body) cast copper alloy with crutch or butter fly handle screwed for iron pipe of dia 15mm fixed, complete all as specified and directed by Engr-in-charge.

8

-

-

... More
S&F in repair brass chromium plated shower rose with swivel joint 125mm size in square with CP long shank arm including fixing to steel pipe or union complete all as specified and as directed.

3

-

-

... More
S&F in repair Chromium plated Towel rail with towel racks of 600mm long of fixed with & including CP brass screws & wooden/plastic cleats (min. weight 190 gms) complete all as specified and directed by Engr-in-charge.

3

-

-

... More
S&F in repairs 32/40 mm dia PVC waste pipe for sink and wash hand basin of pressure rating 10 kgf/Sqm complete all as specified and as directed.

5

-

-

... More
S&F in repairs PVC connection 15mm dia and 600mm long with two Nos of PTMT checknuts and washers complete. All as directed by Engr-in-charge.

25

-

-

... More
S & F glass shelf assembly consisting of 5.5mm thick glass shelf 150mm wide & 600mm long with chromium plated bracket guard incl Stainless steel 100mm long bracket (one Pair).complete all as specified and directed by Engr-in-charge.

5

-

-

... More
Complete removal of existing treatment of wall surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and effloescent salts and trading oil and greasy spots and applying two coats of oil bound distemper over and included 1.50 mm thick wall care putty to make smooth surface incl complete removal of existing treatment on walls all as specified and directed by Engr-in- charge

450

-

-

... More
Complete removal of existing treatment of wall surface external surfaces including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and effloescent salts and trading oil and greasy spots and for applying two or more coats of Finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) all as per manufacturs instructions incl necessary scaffolding writing letters etc complete all as specified and directed by Engr-in-charge.

485

-

-

... More
Complete removal of existing treatment of Ceiling including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and effloescent salts and trading oil and greasy spots and applying two coats of white wash of the bldg . complete all as specified and directed.

165

-

-

... More
M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed by Engr-in-charge.

45

-

-

... More
M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed by Engr-in-charge.

35

-

-

... More
Supply & fixing cross Arms, bracings, supports, clamps etc fabricated from steel including nuts, bolts, washers, welding, bending, drilling holes for bolts in any shape or size as directed inclusive of one primer coat, one under coat and one finishing coat of aluminium paint.

3

-

-

... More
Supply and fixing of galvanized steel stay assembly complete with stay rod 20mm dia including stay strand 7/4 mm fixed for stay of poles including necessary MS clamp of 50x6mm flat iron nuts and bolts, loop insulators complete all as specified and directed by Engr-in-Charge. Note:- Earth work, PCC shall be measured and paid separately.

24

-

-

... More
M&L of Switch air break gang operated triple pole mechanically operated from ground level, mounted on insulators and steel frame (15 insulator type) outdoor type suitable for vertical installation single break provided with locking arrangement consisting of MS channel, HT post top porcelene insulator with drop out fuses operating Rod 20m dia GI pipe medium grade confirming to IS:1818 of 1972 and current rating 200 Amp and voltage 11 KV complete all as specified including jumpering, lead of wire/cable as directed at site.

1

-

-

... More
Material & labour for Electrical Earthing with GI plate electrod of size 600 mm x 600 mm x 6mm thick burried directly in ground vertically earth pit not less than 2.5 mtr deep below normal ground level with the top edge of the earth plate at a depth not less 1.5 mtr below normal ground level connected to 4 mm GI wire by means of bolts, nuts, washers made of galvanised iron and connected main control board/switch gear/pannel boards all as specified and shown in Electrical plate No 3 of MES shcedule (SSR) Part-I, 2009 including necessary excavation and earth work in any type of soil, charcoal dust, salt and PCC 1:2:4 type B1 in chambler RCC 1:2:4 type B1 cover slab with 6 mm dia mild steel bars at 100 mm center to center both ways and with 6 mm dia MS hook complete and testing resistence all as specified and as directed. Note:- (i) GI wire 4 mm dia upto 7.5 mtr length shall be deemed to include in this items rate. (ii) On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost by the contactor.

3

-

-

... More
Supply and fixing in replacement of lightning arrestor HT 12 KV 10 KA station class including jumpering, lead of wire/cable all as specified and directed.

1

-

-

... More
Supply and fixing of aluminium conductor steel reinforced (ACSR) of any size description including stretching on overhead line on LT/HT poles with aluminium binding wire or aluminium taps to insulators including jumpering the OH line, jointing complete all as specified.

0.05

-

-

... More
Material and labour for point wiring complete with 1.5 sqmm single core multistandard copper conductor fire resistant low smoke and low halogen (FRLS) PVC insulated and unsheathed cable 1100 Volts grade conforming to IS-694 drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20mm dia (external) but shall be increased as per actual site requirement in accordance with clause No 19.125 of SSR Part I) ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends, tees, junction boxes etx fixed concealed/recessed in wall or ceiling etc including 1.5mm FRLS PVC insulated unsheathed copper earth wire including sunken type pressed steel terminal boxes electro plated of suitable size with bakelite white/colored top sheet cover 3.0mm thick for :-

-

-

-

... More
One light point controlled by one way switch.

4

-

-

... More
One 3 pin 6 Amps socket outlet on same board

1

-

-

... More
S&F Switch piano flush modular type (ISI marked), single-pole, one way 6/5 Amp, 240 Volts complete all as specified & directed.

5

-

-

... More
S&F socket multipurpose 5 pin, 6/5 Amp piano flush modular type, 240 Volts complete all as specified & directed. Make : Anchor/Havells (Reo)/Legrand

1

-

-

... More
M&L LED tube light fitting 1 x 20w, 230v including LED (tube rod), 4 feet batten fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size, complete all as specified and directed.

4

-

-

... More
Supply and fixing MCB SP, 6 to 32 Amps 10 KA single pole AC 230 volts 'B' curve complete all as specified

2

-

-

... More
Supply and fixing MCB SPN 6 to 40 Amps 10 KA AC 230 volts 'B' curve complete all as specified

1

-

-

... More
S/F of Sheet metal enclosures for fixing MCBs Single pole and neutral 4 way, 240 volts with 200 Amps rated bus bar with single door fixed on flush to the wall including making the hole in the wall and fixing the DB including cement work and plastering complete all as directedMake: C&S,LEGRANDSor equivalent

1

-

-

... More
M/L of submain wiring with 3 runs of 4.0 sqmm single core FRLS PVC insulated stranded copper conductor cable drawn through rigid non metallic PVC conduit with one run of 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor and necessary connections all as directed. Note : 3 runs of 4 sqmm FRLS PVC insulated unsheathed copper conductor PVC insulated unsheathed copper conductor and 1 run of PVC conduit of size 20 mm will be measured as single run

10

-

-

... More
S&F Modular metal flush box 4 modules complete all as specified and directed.

1

-

-

... More
S&F Modular white cover plate with frame, 4 modules complete all as specified and directed.

1

-

-

... More
Material and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed 6 Sqmm 4 core with required aluminium cable lugs all as specified and directed.

50

-

-

... More
Supply and laying double wall corrugated HDPE duct pipe 50 mm outer dia conforming to IS 14930 (Part-ii) of approved coour with fittings for cable protection complete laid in trenches or fixed on walls with clamps of suitable size all as specified and directed by Enggr-in-charge

45

-

-

... More
Excavation in trenches, not exc 1.5 m wide and n. exc 1.5 m depth, or n exc 10 Sqm on plan and n exc 1.5 m in depth for foundations, shafts, wells, cesspits, manholes, pier holes, for foundations of poles, struts, stays etc. or laying underground cable and water supply pipe lines etc. in soft/loose soil, & getting out including taking out old brick or precast cable cover complete all as specified and directed by Engineer-in-Charge.

14

-

-

... More
Returning, filling in, including spreading, leveling watering and well ramming in layers n.exc 25 cm in soft/loose soil/complete all as specified and directed by Engineer-in-charge.

12.5

-

-

... More
Removal of excavated soil material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified and directed by Engineer-in-charge.

1.5

-

-

... More
Taking up or down existing 50 mm bore galvanised steel water tubing including connections, fixed in walls, ceiling or laid under floor or laid in trenches and shifting in new location including new fitting and fixture as required at site.complete all as specified and directed by Engineer-in-charge. Note :-Excavation and earthwork shall be measured and paid for separately.

90

-

-

... More
S&F 50mm bore galvanized steel water tubing medium grade with & including all fittings and fixed complete laid in floors / trenches complete all as specified and directed by Engineer-in-charge.

20

-

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.