Medical Health And Family Welfare Department Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 38,400Document Cost
₹ 500Tender Fee
₹ 500
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MEDIC_440626_1Tender No
EE M and H Kota NIT No. 20/2024-25Tender Authority
Medical Health And Family Welfare Department ViewPurchaser Address
-Website
http://http://www.rajswasthya.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
PHC Motipura
50
5
250
... More
PHC Sahrod
50
5
250
... More
Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils
-
-
-
... More
PHC Banjari
22.06
178
3926.68
... More
PHC Barana
22.06
178
3926.68
... More
PHC Motipura
22.06
178
3926.68
... More
PHC Sahrod
22.06
178
3926.68
... More
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
-
-
-
... More
PHC Banjari
3.65
3302
12052.3
... More
PHC Barana
3.65
3302
12052.3
... More
PHC Motipura
3.65
3302
12052.3
... More
PHC Sahrod
3.65
3302
12052.3
... More
Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand).
-
-
-
... More
PHC Banjari
18.37
2838
52134.06
... More
PHC Barana
18.37
2838
52134.06
... More
PHC Motipura
18.37
2838
52134.06
... More
PHC Sahrod
18.37
2838
52134.06
... More
Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc.
-
-
-
... More
PHC Banjari
5.93
157
931.01
... More
PHC Barana
5.93
157
931.01
... More
PHC Motipura
5.93
157
931.01
... More
PHC Sahrod
5.93
157
931.01
... More
Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix
-
-
-
... More
PHC Banjari
0.62
4934
3059.08
... More
PHC Barana
0.62
4934
3059.08
... More
PHC Motipura
0.62
4934
3059.08
... More
PHC Sahrod
0.62
4934
3059.08
... More
Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand)
-
-
-
... More
PHC Banjari
10.37
4990
51746.3
... More
PHC Barana
10.37
4990
51746.3
... More
PHC Motipura
10.37
4990
51746.3
... More
PHC Sahrod
10.37
4990
51746.3
... More
Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.
-
-
-
... More
PHC Banjari
18.04
340
6133.6
... More
PHC Barana
18.04
340
6133.6
... More
PHC Motipura
18.04
340
6133.6
... More
PHC Sahrod
18.04
340
6133.6
... More
Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.
M20 grade Nominal Mix / Design Mix
-
-
-
... More
PHC Banjari
2.11
5185
10940.35
... More
PHC Barana
2.11
5185
10940.35
... More
PHC Motipura
2.11
5185
10940.35
... More
PHC Sahrod
2.11
5185
10940.35
... More
Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) Thermo-mechanically Treated bars (Conforming of relevent IS code)
-
-
-
... More
PHC Banjari
273
77
21021
... More
PHC Barana
273
77
21021
... More
PHC Motipura
273
77
21021
... More
PHC Sahrod
273
77
21021
... More
Providing & fixing precast cement concrete coping 1 : 2 : 4 mix 50mm thick complete as per specification :
-
-
-
... More
PHC Banjari
3.57
367
1310.19
... More
PHC Barana
3.57
367
1310.19
... More
PHC Motipura
3.57
367
1310.19
... More
PHC Sahrod
3.57
367
1310.19
... More
Banking excavated earth in layers not exceeding 20cm. in depth breaking clods watering, rolling each layer with 1/2 tonne roller, or stone or steel rammers, and rolling every 3rd and top- most layer with power roller of 8-10 tonne capacity and dressing up in embankments for roads, flood banks marginal banks, and guide banks etc. lead up to 50 Mtr. and lift up to 1.5 Mtr. All kinds of soils
-
-
-
... More
PHC Banjari
9.2
171
1573.2
... More
PHC Barana
9.2
171
1573.2
... More
PHC Motipura
9.2
171
1573.2
... More
PHC Sahrod
9.2
171
1573.2
... More
CARRIAGE OF MATERIALS Earth, Sand, Lime, Morrum manure or sludge For 10 Km.
-
-
-
... More
PHC Banjari
9.2
165
1518
... More
PHC Barana
9.2
165
1518
... More
PHC Motipura
9.2
165
1518
... More
PHC Sahrod
9.2
165
1518
... More
Random rubble dry stone Kharanja under floor.
-
-
-
... More
PHC Banjari
3.07
932
2861.24
... More
PHC Barana
3.07
932
2861.24
... More
PHC Motipura
3.07
932
2861.24
... More
PHC Sahrod
3.07
932
2861.24
... More
6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand)
-
-
-
... More
PHC Banjari
9.3
139
1292.7
... More
PHC Barana
9.3
139
1292.7
... More
PHC Motipura
9.3
139
1292.7
... More
PHC Sahrod
9.3
139
1292.7
... More
Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20mm thick .
-
-
-
... More
PHC Banjari
113.32
202
22890.64
... More
PHC Barana
113.32
202
22890.64
... More
PHC Motipura
113.32
202
22890.64
... More
PHC Sahrod
113.32
202
22890.64
... More
P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm X 600 mm
-
-
-
... More
PHC Banjari
10.52
911
9583.72
... More
PHC Barana
10.52
911
9583.72
... More
PHC Motipura
10.52
911
9583.72
... More
PHC Sahrod
10.52
911
9583.72
... More
Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).
-
-
-
... More
PHC Banjari
11.01
674
7420.74
... More
PHC Barana
11.01
674
7420.74
... More
PHC Motipura
11.01
674
7420.74
... More
PHC Sahrod
11.01
674
7420.74
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) Light shade using shade cement.
-
-
-
... More
PHC Banjari
6.03
571
3443.13
... More
PHC Barana
6.03
571
3443.13
... More
PHC Motipura
6.03
571
3443.13
... More
PHC Sahrod
6.03
571
3443.13
... More
Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. South Zed Black Above 3601 Cm2 Slabs
-
-
-
... More
PHC Banjari
1.83
4076
7459.08
... More
PHC Barana
1.83
4076
7459.08
... More
PHC Motipura
1.83
4076
7459.08
... More
PHC Sahrod
1.83
4076
7459.08
... More
Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble work Full Edge moulding
-
-
-
... More
PHC Banjari
3.05
146
445.3
... More
PHC Barana
3.05
146
445.3
... More
PHC Motipura
3.05
146
445.3
... More
PHC Sahrod
3.05
146
445.3
... More
Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete. New Plastered Surface (three or more coats)
-
-
-
... More
PHC Banjari
33.7
84
2830.8
... More
PHC Barana
33.7
84
2830.8
... More
PHC Motipura
33.7
84
2830.8
... More
PHC Sahrod
33.7
84
2830.8
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: New work (two or more coats) over and including scrapping and priming coat with cement primer.
-
-
-
... More
PHC Banjari
28.22
75
2116.5
... More
PHC Barana
28.22
75
2116.5
... More
PHC Motipura
28.22
75
2116.5
... More
PHC Sahrod
28.22
75
2116.5
... More
Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ).
-
-
-
... More
PHC Banjari
55.39
86
4763.54
... More
PHC Barana
55.39
86
4763.54
... More
PHC Motipura
55.39
86
4763.54
... More
PHC Sahrod
55.39
86
4763.54
... More
Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately).
For fixed portion
Powder coating aluminum ( minimum thickness of powder coating 50 micron)
-
-
-
... More
PHC Banjari
87.76
351
30803.76
... More
PHC Barana
87.76
351
30803.76
... More
PHC Motipura
87.76
351
30803.76
... More
PHC Sahrod
87.76
351
30803.76
... More
For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). Powder coating aluminum ( minimum thickness of powder coating 50 micron)
-
-
-
... More
PHC Banjari
25.96
381
9890.76
... More
PHC Barana
25.96
381
9890.76
... More
PHC Motipura
25.96
381
9890.76
... More
PHC Sahrod
25.96
381
9890.76
... More
Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminum window/vent with required screws, Y and H aluminium section (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge. Powder coating aluminum ( minimum thickness of powder coating 50 micron)
-
-
-
... More
PHC Banjari
3.96
1843
7298.28
... More
PHC Barana
3.96
1843
7298.28
... More
PHC Motipura
3.96
1843
7298.28
... More
PHC Sahrod
3.96
1843
7298.28
... More
Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board Grade I, Type II conforming to IS : 12823 bonded formaldehyde synthetic resin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge. Prelaminated particle board with decorative lamination on both sides.
-
-
-
... More
PHC Banjari
27.78
1092
30335.76
... More
PHC Barana
27.78
1092
30335.76
... More
PHC Motipura
27.78
1092
30335.76
... More
PHC Sahrod
27.78
1092
30335.76
... More
Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm)
-
-
-
... More
PHC Banjari
3.96
902
3571.92
... More
PHC Barana
3.96
902
3571.92
... More
PHC Motipura
3.96
902
3571.92
... More
PHC Sahrod
3.96
902
3571.92
... More
Providing and fixing aluminium U shape handle of size 100mm with SS screws etc. Complete as per direction of Engineer-in-charge. Powder coated minimum thickness 50 micron aluminium
-
-
-
... More
PHC Banjari
12
73
876
... More
PHC Barana
12
73
876
... More
PHC Motipura
12
73
876
... More
PHC Sahrod
12
73
876
... More
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
-
-
-
... More
PHC Banjari
1
328
328
... More
PHC Barana
1
328
328
... More
PHC Motipura
1
328
328
... More
PHC Sahrod
1
328
328
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. With stainless steel cover plate
-
-
-
... More
PHC Banjari
1
1426
1426
... More
PHC Barana
1
1426
1426
... More
PHC Motipura
1
1426
1426
... More
PHC Sahrod
1
1426
1426
... More
Providing & Fixing BWR ISI marked 19 mm board of approved make for making wardrobe/shelves and other furniture with fevicol & nails complete as per approved by engineer in charge.
-
-
-
... More
PHC Banjari
10.89
1350
14701.5
... More
PHC Barana
10.89
1350
14701.5
... More
PHC Motipura
10.89
1350
14701.5
... More
PHC Sahrod
10.89
1350
14701.5
... More
Providing and fixing stainless steel railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Grade 304
-
-
-
... More
PHC Banjari
100
503
50300
... More
PHC Barana
100
503
50300
... More
PHC Motipura
100
503
50300
... More
PHC Sahrod
100
503
50300
... More
Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 110 mm dia
-
-
-
... More
PHC Banjari
22
336
7392
... More
PHC Barana
22
336
7392
... More
PHC Motipura
22
336
7392
... More
PHC Sahrod
22
336
7392
... More
Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Coupler 110mm dia
-
-
-
... More
PHC Banjari
4
108
432
... More
PHC Barana
4
108
432
... More
PHC Motipura
4
108
432
... More
PHC Sahrod
4
108
432
... More
Bend 87.5 Dg. 110mm dia
-
-
-
... More
PHC Banjari
2
155
310
... More
PHC Barana
2
155
310
... More
PHC Motipura
2
155
310
... More
PHC Sahrod
2
155
310
... More
Bend 45 Dg. 110mm dia
-
-
-
... More
PHC Banjari
2
132
264
... More
PHC Barana
2
132
264
... More
PHC Motipura
2
132
264
... More
PHC Sahrod
2
132
264
... More
Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
-
-
-
... More
PHC Banjari
0.79
4483
3541.57
... More
PHC Barana
0.79
4483
3541.57
... More
PHC Motipura
0.79
4483
3541.57
... More
PHC Sahrod
0.79
4483
3541.57
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
-
-
-
... More
PHC Banjari
9.9
111
1098.9
... More
PHC Barana
9.9
111
1098.9
... More
PHC Motipura
9.9
111
1098.9
... More
PHC Sahrod
9.9
111
1098.9
... More
Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR Short point (up to 3 mtr.)
-
-
-
... More
PHC Banjari
1
359
359
... More
PHC Barana
1
359
359
... More
PHC Motipura
1
359
359
... More
PHC Sahrod
1
359
359
... More
Medium point (up to 6 mtr.)
-
-
-
... More
PHC Banjari
2
578
1156
... More
PHC Barana
2
578
1156
... More
PHC Motipura
2
578
1156
... More
PHC Sahrod
2
578
1156
... More
Long point (up to 10 mtr.)
-
-
-
... More
PHC Banjari
2
772
1544
... More
PHC Barana
2
772
1544
... More
PHC Motipura
2
772
1544
... More
PHC Sahrod
2
772
1544
... More
Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's ISI marked (IS:3419-1988)accessories, Hot Dipped Galvanized Modular box of 1.2 mm thick with earth terminal, 10 A modular switch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR On board
-
-
-
... More
PHC Banjari
6
357
2142
... More
PHC Barana
6
357
2142
... More
PHC Motipura
6
357
2142
... More
PHC Sahrod
6
357
2142
... More
Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost of ISI marked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet (IS:1293) making connection , testing , etc. as required. For specification of Wiring accessories refer Chapter E - 07 related item & For additional technical parameters of product / work refer Annexure 'A' attached with this BSR
-
-
-
... More
PHC Banjari
2
580
1160
... More
PHC Barana
2
580
1160
... More
PHC Motipura
2
580
1160
... More
PHC Sahrod
2
580
1160
... More
Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 1 x 1.5 sq.mm
-
-
-
... More
PHC Banjari
10
22
220
... More
PHC Barana
10
22
220
... More
PHC Motipura
10
22
220
... More
PHC Sahrod
10
22
220
... More
2 x 2.5 sq. mm. + 1x1.5sqmm
-
-
-
... More
PHC Banjari
15
81
1215
... More
PHC Barana
15
81
1215
... More
PHC Motipura
15
81
1215
... More
PHC Sahrod
15
81
1215
... More
2 x 4.0 sq. mm. + 1 x 2.5 sq. mm.
-
-
-
... More
PHC Banjari
30
122
3660
... More
PHC Barana
30
122
3660
... More
PHC Motipura
30
122
3660
... More
PHC Sahrod
30
122
3660
... More
Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door ( Metal / Glazed )Distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3, powder painted complete with reversible door (for double door DB only )100 amp. insulated copper bus bar/shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR. Metal door (single phase) IK-09 and IP-43 with Metal end box
6 Way (6+2)
-
-
-
... More
PHC Banjari
1
2018
2018
... More
PHC Barana
1
2018
2018
... More
PHC Motipura
1
2018
2018
... More
PHC Sahrod
1
2018
2018
... More
Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR. Single pole MCB (With B/C curve tripping Characteristics) 6 A to 32 A rating
-
-
-
... More
PHC Banjari
4
187
748
... More
PHC Barana
4
187
748
... More
PHC Motipura
4
187
748
... More
PHC Sahrod
4
187
748
... More
Double pole MCB(With B/C curve tripping Characteristics) 40 A rating
-
-
-
... More
PHC Banjari
1
900
900
... More
PHC Barana
1
900
900
... More
PHC Motipura
1
900
900
... More
PHC Sahrod
1
900
900
... More
S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 20 mm
-
-
-
... More
PHC Banjari
12
40
480
... More
PHC Barana
12
40
480
... More
PHC Motipura
12
40
480
... More
PHC Sahrod
12
40
480
... More
25 mm
-
-
-
... More
PHC Banjari
18
56
1008
... More
PHC Barana
18
56
1008
... More
PHC Motipura
18
56
1008
... More
PHC Sahrod
18
56
1008
... More
P & F phenolic laminated sheet 2.0 mm thick of following size . Including screws, cup washer as required.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR. 75 mm dia
-
-
-
... More
PHC Banjari
1
10
10
... More
PHC Barana
1
10
10
... More
PHC Motipura
1
10
10
... More
PHC Sahrod
1
10
10
... More
Providing & Fixing of modular type 120 W Step Fan regulator duly ISI marked (IS 11037:1984 ) with CM/L no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR. 5 step fan regulator 2 Module 360 dgree rotating
-
-
-
... More
PHC Banjari
1
398
398
... More
PHC Barana
1
398
398
... More
PHC Motipura
1
398
398
... More
PHC Sahrod
1
398
398
... More
Providing & Fixing of following modular accessories as per PWD specification for electrical Works, made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR. Modular MCB 6 A to 32 A SP
-
-
-
... More
PHC Banjari
1
225
225
... More
PHC Barana
1
225
225
... More
PHC Motipura
1
225
225
... More
PHC Sahrod
1
225
225
... More
P & F 1.2mm thick M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR
-
-
-
... More
PHC Banjari
1
128
128
... More
PHC Barana
1
128
128
... More
PHC Motipura
1
128
128
... More
PHC Sahrod
1
128
128
... More
P & F of Gravity Louver shutter of superior quality made out of frame of 18 swg M.S. sheet & Louvers made from 24 swg MS Sheet with enamel paint including cost of nuts, bolts, etc as reqd. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . Up to 380 mm size
-
-
-
... More
PHC Banjari
1
287
287
... More
PHC Barana
1
287
287
... More
PHC Motipura
1
287
287
... More
PHC Sahrod
1
287
287
... More
Providing & Fixing of IP20 SMD Mid Power LED batten type integrated light fixture made from Powder coated Extruded aluminium housing with in built driver , System lumen efficacy ≥ 110 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD 10% , P. F.≥0.95, CRI 80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 1170mm(+/-10%) LED batten with min. lumen output 2200 lm
-
-
-
... More
PHC Banjari
2
492
984
... More
PHC Barana
2
492
984
... More
PHC Motipura
2
492
984
... More
PHC Sahrod
2
492
984
... More
Providing & Fixing of BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 1200 mm Sweep BEE 1 Star rated (service value =4.0 to 4.5 )
-
-
-
... More
PHC Banjari
1
1890
1890
... More
PHC Barana
1
1890
1890
... More
PHC Motipura
1
1890
1890
... More
PHC Sahrod
1
1890
1890
... More
Providing & Fixing of of Double ball bearing, copper wounded capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible 3 core copper conductor ,making connections, testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 225 mm sweep
-
-
-
... More
PHC Banjari
1
1687
1687
... More
PHC Barana
1
1687
1687
... More
PHC Motipura
1
1687
1687
... More
PHC Sahrod
1
1687
1687
... More
Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity 99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR. 10.0 Sq. mm 2 core
-
-
-
... More
PHC Banjari
50
152
7600
... More
PHC Barana
50
152
7600
... More
PHC Motipura
50
152
7600
... More
PHC Sahrod
50
152
7600
... More
Supply and installation of high tensile low carbon steel rod molecularly bonded with 99.9 % Copper thickness (250 microns) and confirming to UL 467, IS/IEC 62561-2 of following size and length and as per point mentioned (a), (b), [c), (d), (e) below :- (a) Bore a hole of dia. 100 mm of required length, Place the rod in the centre of Hole (b) filled with anti corrosive conductive compounds with the permanent sealings at both the ends, CPRI/ ERDA tested with RMS capacity of minimum 30 KA for withstanding 1 second .To ensure the moisture content and electrical conductivity, 25 kg for 2000 mm & 50 Kgs for 3000mm of resistance lowering earth enhancement material shall be used as a backfill compound. The compound shall be tested form NABL acredeated lab for low resistivity ( less than 0.12 Ohm - meter ) & high conductivity in nature with carbon as a major content as per referance of IS 3043-1987,IEEE 80-2013 (clause 14.5d) , IEEE 837 & IER 1956 with latest amendemnts © Connect the rod with copper Strip/Conductor/Wire with suitable clamp made from tinned copper and SS 304 Bolt
(d) Place Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm.
(d) Testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book.
(e) Test certificates for confirming above standards from OEM is mandatory. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 17.2 mm thick and 3 Mtr. Long
-
-
-
... More
PHC Banjari
1
7010
7010
... More
PHC Barana
1
7010
7010
... More
PHC Motipura
1
7010
7010
... More
PHC Sahrod
1
7010
7010
... More
Supply & Laying following size earth wire in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection with GI/Cu purity purity 95% thimble etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 8 SWG copper Wire
-
-
-
... More
PHC Banjari
10
148
1480
... More
PHC Barana
10
148
1480
... More
PHC Motipura
10
148
1480
... More
PHC Sahrod
10
148
1480
... More
Providing & Fixing of IP-20 LED Recessed / Surface Mounted, Round / Sqaure SMD Mid Power LED Downlight with power coated die-cast aluminum housing with UV Stabilized non yellowish Diffuser with BIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency 85% . System Lumen efficacy of ≥ 110 lm / watt, THD 10 % , Pf.≥0.95, CRI 80, life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
Surface Mounting (with extruded alumn. Housing )
Minimum lumen output 1950 lm
-
-
-
... More
PHC Banjari
2
1620
3240
... More
PHC Barana
2
1620
3240
... More
PHC Motipura
2
1620
3240
... More
PHC Sahrod
2
1620
3240
... More
Supply & Fixing of Dry Powder Agent (as per IS 4308:2019), ABC type Fire Extinguisher (Stored Pressure type) conforming to IS:15683:2018 , Powder coated Internal & External Surface Deep drawn cylinder body of Mild Steel CR2 grade conforming to IS: 513, Squeeze grip Forged brass release valve with Inbuilt safety release device, Diaphragm Type, 0 to 28 bar range pressure gauge, 450 mm long EPDM discharge tube, QR code for Product Traceability including Fixing on wall with suitable Anchor Fasteners as required of following capacity. Test Certificates of all the Parameters along with Hydro test & Burst test (For Cylinder Body) Certificate from OEM / External NABL Accrediated Lab is to be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 4 kg
-
-
-
... More
PHC Banjari
1
4104
4104
... More
PHC Barana
1
4104
4104
... More
PHC Motipura
1
4104
4104
... More
PHC Sahrod
1
4104
4104
... More
Providing & Fixing of following size mounting grid plates with cover plates made from fire retardent UV established high performance engineering plastic suitable for all universal metal boxes for front installation & removal direct fit type complete in all respect.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 1/2 Module
-
-
-
... More
PHC Banjari
2
65
130
... More
PHC Barana
2
65
130
... More
PHC Motipura
2
65
130
... More
PHC Sahrod
2
65
130
... More
Providing & Fixing of Wiring Accessories OEM fabricated following size GI box of 1.2 mm thick with earthing terminal and adjustable floating clamp in recess/ surface suitable for modular accessories as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 1-2 Module
-
-
-
... More
PHC Banjari
2
86
172
... More
PHC Barana
2
86
172
... More
PHC Motipura
2
86
172
... More
PHC Sahrod
2
86
172
... More
Providing & Fixing of modular type lockable feature socket duly made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 6/16 A shuttered socket
-
-
-
... More
PHC Banjari
1
176
176
... More
PHC Barana
1
176
176
... More
PHC Motipura
1
176
176
... More
PHC Sahrod
1
176
176
... More
Supply , Installation, Testing and Comissioning of Inverter type Air Cooled Hi Wall split type Air conditioners with latest star rating system as per BEE amended upto date complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU), R-32/R-410 Green Refrigerant, wireless Remote control, suitable for working between 230V +/- 10% with low & high voltage cutoff and 50 hz , single phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 1.0 TR ISEER not less then 3.8
-
-
-
... More
PHC Banjari
1
40096
40096
... More
PHC Barana
1
40096
40096
... More
PHC Motipura
1
40096
40096
... More
PHC Sahrod
1
40096
40096
... More
Providing & Fixing of IS : 4985 - 2000 Class -4 (10 Kgf / Sqcm) UPVC drain water piping with fittings (IS:7834 & 10Kgf/sqcm) like elbow, socket, Tee, solvent cement jointing, support with MS hanger on ceiling or recessed in wall with chasing & plastering with 6 mm thick closed cell elastomeric nitrile rubber insulation including leakage testing etc. as required of following Nominal sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 20 mm
-
-
-
... More
PHC Banjari
4
189
756
... More
PHC Barana
4
189
756
... More
PHC Motipura
4
189
756
... More
PHC Sahrod
4
189
756
... More
Supply, Fixing and testing of following capacity ISO certified company made wall mounted stabilizer having output voltage variation from 200 V to 250 V(+/-5%) with input voltage variation from 170 V to 260 V, time delay facility from 2 to 4 minute and high cutoff at 270 V with providing of 16 Amp /20 Amp Industrial plug top making connection etc complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 4 kVA
-
-
-
... More
PHC Banjari
1
3375
3375
... More
PHC Barana
1
3375
3375
... More
PHC Motipura
1
3375
3375
... More
PHC Sahrod
1
3375
3375
... More
Making hole in stone masonary/ RCC wall/ RCC slab with core cutter for accomodating refrigerant pipe/ drain pipe/ MS pipe/ cables etc of following dia 50 mm dia per running inch length
-
-
-
... More
PHC Banjari
9
80
720
... More
PHC Barana
9
80
720
... More
PHC Motipura
9
80
720
... More
PHC Sahrod
9
80
720
... More
Supply & fixing MS powder coated stand suitable for 1.0/1.5/ 2.0 Tr outdoor type of Split AC. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
-
-
-
... More
PHC Banjari
1
580
580
... More
PHC Barana
1
580
580
... More
PHC Motipura
1
580
580
... More
PHC Sahrod
1
580
580
... More
Providing & Fixing of 240/415 V Residual current circuit breaker (RCCB) conforming to (IS:12640-1)/ IEC 61008 -1, rated 4 KV impulse withstand voltage truly current operated and shall operate on CBCT mechanisum, provision for pad lock, min. operation 10,000 upto 63 A rating and 5000 for 100 A rating and minimum phase termination capacity of 35 sq.mm. rigid wire , IP 20 contact protection with existing distribution board / sheet including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR
Two pole 100/300mA sensitivity
40 A rating
-
-
-
... More
PHC Banjari
1
2366
2366
... More
PHC Barana
1
2366
2366
... More
PHC Motipura
1
2366
2366
... More
PHC Sahrod
1
2366
2366
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%