Maharana Pratap University Of Agriculture And Technology Tender

Providing and fixing factory made polyvinyl chloride (PVC) Door frame manufactured of the size 50x47 mm with a wall thickness of 5 mm made out of extruded 5mm PVC foam sheet mitre cut at two corners and jointing with 2 nos of 150 mm long brackets of 15x15mm M.S. Square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. square tube of 19 gauge. EPDM rubber gasket weather seal to be providing through out the frame shall be fixed to the wall using 65/100 mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4 nos of screws to be provided for each vertical member and minimum 2 nos for horizontal members etc. complete as per manufacture specification and directon of enginee in charge.

Providing and fixing 30mm thick FACTORY MADE SOLID BOTH SIDE PRELAM PANEL PVC DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for stiles top & bottom rails M.S. frame shall have a coat of sheet primers of approved make and manufacture, M.S. frame covered with 5mm thick heat moulded 'Rajshri' prelim PVC 'C' channel of size 30mm thickness, 70mm widthout of which 50mm shall, be flat and 20mm shall be tapered in 45" angle on either side forming stiles and 5mm thick 95mm wide Rajshri Prelam PVC sheet out of 75mm shall be flat and 20mm shall be topered in 450 on the inner side to from top and bottom rail and 115mm wide Rajshri Prelam PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail Top bottom and lock rails shall be provided either side of the panel 10mm (5mm x 2) thick 20mm wide cross PVC sheet shall be provided. as gap insert for top rail and bottom rail. Panelling of 5mm thick both prelam PVC sheet to be fittted in the M.S. frame welded/sealed

Half brick masonry in foundation & plinth using bricks of designation 75 Cement mortar 1:4 ( 1 cement : 4 coarse sand )Add extra over item no 5.8 for half brick masonry in superstructure up to third storey including cost of nominal hoopreinforcement ( 2 Nos. 6 mm dia M.S. bar at every forth course )

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work including prepration of base with primer putty lippy complete in all respect.

Providing and fixing Ist quality standard White/ ivory,grey, fuma red brown, light green, light blue and other light shades Glazed Tiles of (confirming to IS : 13753 & IS 13622) of size 300 mm x 200 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (Fxcluding the cost of cement plaster on walls & pillars ).

Providing and fixing Ist quality MAT finished ceremic tiles size 300 x 300 mm confirming to IS: 13755 & IS: 15622 colour such as white, grey, Ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4).

Painting with enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

Applying Birla /JK white cement based putty over cement plaster surface for making even surface

Brick masonary in foundation and plinthwith bricks of class designation 75 inCement mortar 1:6 ( 1 cement : 6 coarse sand )Add extra over item no 5.1 for brick work in super structure up to third storey

Plaster on new surface on wall in cement sand mortar 1:4 including raking of joints etc. complete fine finish:20mm thick

Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish : 25mm thick

Providing and fixing Granite stone slab thickness 16 - 18 mm mirror polished and machine cut in walls, pillars, steps, shelves, counter, floors etc. laid on 12 mm (Av.) thick base of cement mortar 1:3(1 cement : 3 coarse sand) jointing with white cement mortar 1:2 ( 1 White cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of.Jhansi (Red/Choclate Colour)(4) Above 3601 cm2 Slabs

Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150mm distance.

Structural steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5 mtr height In flates, tees, angles & Channals

Providing and fixing welded mesh/expanded metal mesh in frame work, flat iron beading 20x3 mm including top cross laps inside and out sides welding, iron bolts, screws, clips etc. complete (Fxcluding frame work) of size. Welded mesh 50x50mmx16 gauge.

Supplying and fixing stone lintels/bed plates of approved quarry rough dressed in cement mortar 1:4Up to 15 cm thick

P & F Indian type white glazed vitreous china Ist quality W.C.orissa pan (I.S: 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor. Size 580 x 440 mm

P & F WVC wash basin (Ist quality, I.S.: 2556 Mark) of approved make with C.I. brackets duly painted 1 No 15 mm C.P. pillar cock (I.S. : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall. Size 580 x 450 mm

P & F Grating of approved quality /make Stainless steel sheet size 125 mm dia

P & F GI pipes ( Internal works ) with GI fittings excluding Union (IS:1239 mark) and MS clamps, including cutting and making good the wall and floors.15mm dia Nominal Bore''B' Class

P & F GI pipes ( Internal works ) with GI fittings excluding Union (IS:1239 mark) and MS clamps, including cutting and making good the wall and floors.25mm dia Nominal Bore''B' Class

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality/ make 110mm dia

Providing and fixing Superior quality (Jaquar Contiental) CP Brass Fittings complete as per direction of Engineer in Charge.Angular stop cock with long thread 15 mm nominal size

Providing and fixing Superior quality (Jaquar Contiental) CP Brass Fittings complete as per direction of Engineer in Charge.Bib Cock with long thread 15 mm nominal size

P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make :CP brass push type Half-turn exposed 25mm nominal bore.

Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make.(a)Bend 87.5 Dg.110mm dia

..do..(b) Single Tee,110mm dia

..do..(c) Door Bend 87.5 Dg.,110mm dia

Providing and laying in position cement concrete including curing compaction etc . Complete in specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate,M10 grade Nominal Mix (with graded stone aggregate 40mm nominal size)