Maharana Pratap University Of Agriculture And Technology Tender

Size 125mm

Size 140mm

Size 160mm

Size 180mm

Size 200mm

Size 225mm

Circular/D&S/2016-17/09/2.2 Providing, lowering, laying and jointing in trenches standard lengths HDPE ISI PE-80 PN-10 marked pipes of follwing grade and nominal diameter as per IS - 4984 : 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread / inser joint / quick release coupler joint / compression fitting joint or flanged joint and jointing pipes in proper position including all specials by butt fusion / electro fusion welding method including all taxes (central and local), transportation and freight charges, inspection charges loading / unloading charges, stacking of pipe, including cost of labour and material, specials (Tee, Bend etc.) satisfactory hydraulic tesing, disnfection etc. complete as per technical specifications and direction of Engineer - in - charge. (excluding earth work) Note :- Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item as shall not be paid separately. Supply of pipes upto 110mm dia in coil & above 110mm dia straight length in 6 M.

Size 90mm

Size 110mm

Size 125mm

Size 140mm

Size 160mm

Size 180mm

Size 200mm

Size 225mm

B-2/1.8 Earthwork in excavation by mechanical means (Hydraulic Excavator) / manual means in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.50 Mtr. Including taking out excavated soil and depositing and refilling of jhiri with watering and ramming and disposal of surplus excavated soil as directed within a lead of 50 Mtr.( All kinds of soil.)

B-77/1.9.1 Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sum on plan including dressing of sides and ramming of bottoms lift upto 15 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available Ordinary Rock

Supply & Installation CI single Ball Airvalves off following size as per IS: 14845 (revised upto date) duly inspected and tested. The work includes supplying and fixing of MS Clamp, GI pipe (2.0 mlong) of respective size for uPVC / AC / DI pipelines.

25 mm PN 1.0

50 mm PN 1.0

B-15/3.2.4 Providing and laying in position cement concrete Including curring, compation etc. complet in specified grade excluding cost of centering & shuttering. All work up to plinth level using 1:3:6 (1Cement : 3 Coarse sand : 6 graded stone aggregate 20mm nominal size)

B-15/3.2.3 Providing & laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering All work pu to plinth level. 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

B-20/4.1.1 Providing and laying in position grade of reinforced cement concrete, including curing, compaction, finishing with rendering in cement sand mortar 1 : 3 (1cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering. All works up to plinth level 1 : 1 : 2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size)

B-20/4.2.1 Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints excluding cost of centering shuttering and reinforcement : 1:1:2 (1-Cement:1-coarse sand:2-graded stone aggregate 20 mm nominal size).

B-22/4.11 Centring & shuttering with plywood or steel sheets including strutting propping, bracing both ways and removal of formwork for foundations in basements raft, footing, stap beams, bass of columns, etc upto plinth level

B-22/4.12.1 Centering & shuttering with plywood or steel sheets including strutting, propping, bacing both ways with wooden members and removal of formwork for super structure up to 4.5 mtr. above plinth for walls (any thickness) including attached pilasters, buttresses plinth and string course.

B-23/4.12.5 Centering & shuttering with plywood or steel sheets including strutting, propping, bacing both ways with wooden members and removal of formwork for super structure up to 4.5 mtr. above plinth Arches, domes, vaults etc upto 6 Mtr. span.

B-23/4.12.12 Add extra for shuttering in circular work in plan up to 10 M over item nos. 4.12.1 to 4.12.3

B-24/4.13.3 Providing and fabricating reinforcement for RCC work including straightening, cutting bending, palcing in position and binding (including cost of binding wire) all complete upto floor three level. Hot rolled deformed bars (IS 1139)

B-82/1.30 Filling available excavated earth (excluding rock) in trenches, plinth, side of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering including lead up to 50 Mtr. And lift upto 1.5 Mtr.

B-95/9.19 Providing and fixing steel gate grating and grills made of angles, tees, square bars of other flats black pipe with hold fast and fittings complete as per design and drawing including cutting and welding and fabrication with priming coat of red oxide.

B-96/9.22.3 Providing and fixing 1mm thick M.S. sheet garrage door shutter with frame of 40x40x6 mm angle iron 3mm M.S. gusset plates at the junctions and corners including all fittings and applying a coat of approved steel primer. Using flats 30 x 6 mm for diagonal braces and central crosspiece.

B-99/9.31 Supplying and fixing, fixed wire gauge of 14 mesh x 24 gauge of the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150 mm distance

B-150/12.53.1 Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding New work (Three or more coats)

S-43/ 3.40.A-3 Construction of cement concrete chamber 125mm dia on depressed floor upto 45 cm height from floor with CI Grating

Circular/D&S/2015-16/04/1.3.1.1 Providing, Lowering, laying, aligning, fixing in position and jointing at all level / depths S&S standard specials with rubber ring (EPDM) joints as per IS : 5385-1985 such as tees, bends, tapers, caps etc within trenches in DI pipe line complete including all material, labour, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge (upto 300mm diameter)

PHED/ BSR -2012/S-2/2.2.2/ P & F G.I. Pipes (External work) with G.I. fittings (IS:1239 Mark) including trenching & refilling earth etc. (20 mm dia nominal bore)

BSR/PHED/B-9/9.4 Structural steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level up to 4.5 Mtr. height in R.S. Joists flats, tees, angles and channels.