Maharana Pratap University Of Agriculture And Technology Tender
... More
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 2,80,000Document Cost
₹ 3,000Tender Fee
₹ 1,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_MPUAT_181886_3Bid Award Id
ViewTender No
E-NIT 14 (2019-20) EO MPUAT UdaipurTender Authority
Maharana Pratap University Of Agriculture And Technology ViewPurchaser Address
-Website
http://https://www.mpuat.ac.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing & fixing factory made polyvinyl chloride [ PVC ) Door frame manufactured by M/S Rajshri of the size 50x47mm with a wall thickness of 5mm made out of extruded PVC foam sheet, mitre cut at two corner and joining with 2 nos. of 150mm long brackets of 15x15mm M.S. squre tube.the two vertical door profiles are to be reinforced with 19x19mm M.S. squre tube of 19 gauge, EPDM rubber gasket weather seal to be providing through out the frame shall be fixed to the wall using 65/100mm long M.S. screws through the frame by using PVC fasteners. A minimum of 4 nos. of screws to be provided for each vertical member and minimum 2 nos. for horizontal member etc. complete as per manufacture specifications and direction of Engineer-in-charge.
15
-
473
... More
[c] Door bend 87.5degree
8
-
92
... More
S I T C of BEE 3 star rated Aluminium wound Transformer conforming to IS: 2026 & Losses as per Discom's CTL ( CTL Test certificate to be attached) of rating 11/0.433KV Delta-Star Connected, Vector Group Dyn 11, standard accessories like conservator, silica gel breather radiator, fins, HT busing & LT cableboxes, Off- LTC (+/- 5% in steps of 2.5%) winding temperature rise of 50/55 C, ISI marked drain valve, Dial type Temperature gauge, first fill of oil, Epoxy based paint, including carrying of pre-commission Testing & Charging of Transformer. (See table - 08 for CTL Losses)
(a) 63 KVA
1
-
159500
... More
[F] Sink cock with swinging casted spout (table mounted ) 15 mm nominal size
4
-
1364
... More
P/Laying ISI marked P.V.C. insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection etc. as required : 4.00 Sqmm. 3 core flat/ round (Gr.-1)
130
-
128
... More
Random Rubble dry stone kharanja under floor
130
-
979
... More
P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make Gun-metal 50mm nominal bore.
2
-
1488
... More
(b) Medium point (up to 6 mtr.)
70
-
338
... More
[D] Concealed stop cock 15 mm nominal size
2
-
924
... More
P & F C. P. brass Urinal Spreader for stall urinal of approved make
3
-
260
... More
P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556 mark), of approve make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS : 1703 mark) complete including cutting and making good the wall: PVC with CP brass long bend
2
-
1341
... More
P & F Grating of approved quality /make C.P. brass with frame Light & Superior quality size 125 mm dia
24
-
56
... More
Providing & fixing of Precast concrete interlocking blocks of M-30 grade manufactured from fully computerised automatic stationary hydraulic vibro-pressed machine and fully computerised automatic batching plant of class A1 / A2 as per BS : 6717-2001 with rubber mould technology including painting with lacker polishing. The C.C. interlocking paving blocks be laid on average 50mm, thick bed of coarse sand and the joint is to be filled with fine sand . Laying procedure on compacted sub base as defined. Compete job is to executed as per the instruction of Engineer-Incharge.The rates to be incusive of all lead, lift and taxes. General specifications of blocks : [1] Shape as defined by Engineer-incharge, [ 2] Tensile splitting strength and breaking load as per BS 6717 : 2001, [3] Colour : Grey cement natural colour, [ 4] Variation in dimension : less than 1.6mm, [5] Variation in thickness : less than 3.2mm., [6] Abrasion : As per BS 6717 : 2001 :-- 80mm. thick interlocking blocks
100
-
559
... More
Supplying and fixing in walls machine cut and polished stone shelves, tands and sills in CM 1 :3 with machine cut edges : Kota stone 25 mm thick.
20
-
707
... More
Extra for edge moulding to 16-18 mm. thick marble stone counters, vanitities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in charge,Granite work.
120
-
170
... More
20 to 25 mm. thick polished stone flooring of over 20 mm. thick base in C.M. 1 : 4 (1 cement : 4 coarse sand) and jointed with grey cement slurry including rubbing complete in all respects : Nimbhahera stone
72
-
821
... More
P & F paper phenolic resin bonded laminated confirming to IS : 2036 - 1995 for boxes / frames including making holes for switches etc. with brass screws, washres / zinc plated nut and bolts as required 6.4mm thick. ( Group-1 )
1
-
891
... More
Providing & Fixing Superior quality (Premium range)CP Brass Fttiings complete as per direction of Engineer Incharge
-
-
-
... More
Applying white cement based putty over cement plaster surface for making even surface
2150
-
138
... More
P& Laying XLPE insulated IS:7098/11/85 of Group 1 and approved make HT cable for working voltage 11 K.V. Earthed direct in ground including excavation of 30 cm × 100 cm size trench, 25 cm layer of river sand. 2nd class bricks covering refilling earth, compaction of earth making necessary connection testing etc. as required of size 3 core 50.0 Sq mm.
25
-
664
... More
Plaster on new surface on walls in cement sand mortar 1:6 including racking of joints etc. complete fine finished, 20mm thick
2910
-
140
... More
P & F Looking Mirror with P.V.C. frame of approved make, size 500 x 400 mm.
4
-
240
... More
Plaster on new surface on walls in cement sand mortar 1:3 including racking of joints etc. complete fine finished, 12mm thick
60
-
108
... More
P&F Double ball bearing capacitor start single phase mettalic blade fresh air fan in existing opening including cost of hardware, flexible copper conductor,making connection, testing etc. as required : 300mm sweep Group-1
6
-
1856
... More
Providing and fixing cow catcher made of R.S. joist, angles, channels, M.S. rounds including cutting, welding and fabrication with priming coat of red oxide [as per design]
1200
-
79
... More
[d] Door Bend[87.5degree]
30
-
138
... More
S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required. (Group- 1)
-
-
-
... More
Construction of Open Surface Drain with 112 mm thick brick masonary in CM 1:4,110 mm thick base concrete1:5:10,37 mm thick M-15 grade C.C. flooring, 12 mm 1:4 cement plaster on all exposed faces of walls including top surface excavation & disposal of earth complete as per approved design/drawing : 150 mm drain, 225 mm Av. depth.
120
-
464
... More
Providing & fixing ISI marked 6 amp bakelite batten / angle holder including making connection testing etc. as required (Group-I)
35
-
20
... More
Providing and laying in position specified grade of reinforcement cement concrete all RCC structural elements upto plinth level including curing compaction finishing with rendering in cement sand mortar 1:3 ( 1 cement : 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement M20 Grade nominal mix (with graded stone aggregate 20mm nominal size)
165
-
4872
... More
Supply and fixing 11kv Disc insulator (IS 731/1971) with minimum creepage distance of 300mm on existing bracket including all accessories like hot dipped GI spindle and nuts etc (as per specifiction of Discom).
(a) B & S type hardware 45 KN
6
-
560
... More
Providing brick kharanja in cement sand mortar 1 : 4 in square pattern over roof of ground floor 75 mm to 100 mm thick average.
555
-
396
... More
Providing and fixing WVC Wash basin Ist quality [IS : 2556 mark] of approved make with, CI brackets duly painted, 1 no., 15mm. CP pillar cock [IS : 8934 mark] and 32 mm CP brass waste coupling of approved make, 25mm G.I. waste pipe complete including cutting and making good the walls of superior quality & manufacture : size 550 x 400mm.
4
-
1568
... More
[e] Coupler
12
-
51
... More
P & F Ball Cock (IS :1703 Mark) with rod & P.V.C. Ball complete brass wt.1000 gm, 25mm.
6
-
409
... More
P/F extra down rod of 15 mm dia ERW ( Electrical resistance welded ) of 1.6mm nominal thick medium duty steel pipe including cutting threading, drilling, fixing quarter pin etc. as required.
30
-
89
... More
Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 mtr. Including taking out the excavated soil and depositing and refilling of jhiri with watering and ramming and disposal of surplus excavated soil as directed within a lead of 50 mtr. : All kinds of soil
845
-
164
... More
Providing, laying and jointing glazed SW pipe grade 'A' [IS : 651 marked] of approved make with spun yarn and stiff mixture of cement mortar 1:1excavation and refilling of earth in all type of soil upto 1:2 m. depth SW fittings including testing of joints etc. complete, 150 mm dia.
80
-
300
... More
Making connection of G.I. distribution branch with G.I. main including all fittings , up to 25 mm. dia.
2
-
235
... More
[d] Bend 87.5degree
12
-
66
... More
Random Rubble stone masonry for foundation and plinth in cement sand mortar above 30 cm. thick wall in cement mortar 1:6 [1cement : 6 sand ]
300
-
2072
... More
Providing & fixing of Heavy duty capacitor start Double ball bearing 900/1400 RPM single phase ISI marked Exhaust fan,IS:2312 marked in existing opening including making connections testing etc. as required.380mm sweep (900/1400RPM) Group l
4
-
3700
... More
Providing and fixing Granite stone slab thickness 16-18 mm mirror polished and machine cut in walls, pillars, steps , shelves, sills, counters, floors etc. laid on 12 mm. [ Av.] thick base of cement mortar 1 : 3 (1 cement: 3 coarse sand) jointing with white cement mortar 1 : 2 [ 1 white cement : 2 marble dust] with pigment to match the shade of the granite slab complete including rubbing and polishing of : Jhunjhunu/Jalore(Red/Choclate colour), above 3601 cm2 slabs.
280
-
2749
... More
Providing and fixing steel glazed doors, windows and ventilator shutters of standard rolled steel section, joints mitred and welded with steel lugs 13 x 3 mm., 10 cm. long embedded in cement concrete block 15 x 10 x 10 cm. of 1 : 3 : 6 [1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm. nominal size] or with wooden plugs & screws or rawl plugs & screws with fixing clips or with bolts &nuts as required including providing and fixing of plain glass panes 4mm. thick with copper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approved steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots, steel handles, peg stays etc. as required, Windows partly fixed and partly openable ( fixed area not to exceed 33% )
54
-
1938
... More
Supply and fixing in cement mortar welded hand railing made out of MS round or square bars, flats etc. for staircase or verandha as per design complete in all respect ( wooden or PVC hand railing to be paid extra) with priming coat of red oxide.
125
-
3400
... More
[a] Single Tee
8
-
83
... More
(c) 32 mm
100
-
65
... More
P & F JET SPRAY for water closet with C.P. Copper Tube flange of approved make.
2
-
248
... More
Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring, earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.:Size 300 Cm. dia outside & 300 Cm. depth .
1
-
13792
... More
(a) Indoor Type
2
-
4200
... More
[a] Single Tee
12
-
149
... More
Providing and fixing Ist quality MAT finished ceramic tiles of size 300 mm. x 300 mm. confirming to IS : 13755 & IS:15622 colour such as white, grey, ivory, fume red brown shades in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete [including cost of cement mortar bed 1:4] , add extra for using 400mm x 400mm tiles
30
-
872.4
... More
S/F dressed sand or other approved stone shelves, tands in cement mortar 1:3 with fine dressed edges 50mm thick.
26
-
766
... More
[b] Single Tee with door
8
-
95
... More
Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make.75mm Dia.
-
-
-
... More
Finishing with 25mm.thick cement plaster on roofs in cement sand mortar 1:4 mix, including water proofing compound @ 2%of cement used, with neat cement finishing, curing etc. complete in all respect including making of 300mm. X 300mm. square.
540
-
212
... More
P & F of IP20 LED Recessed / Surface Mounted Round/ Sqaure Non-Dimmable Downlight with die-cast aluminum housing & Heat Sink for heat dissipation, high p0urity reflector with external driver having efficiency 85% and in compliance to IEC standards. Power cConsumption of ≤7W/10W / 15W/ 18W with ᷉ 500/ 750/ 1100/ 1250 lumens, System Lumen efficacy of 70 lm/ watt output suitable to replace 1×18W/ 2×18W / 2×26W CFL Downlights, life time of 50000 Burning Hours with 70% of intial Lumen maintaned. CCT 3000°K, 4000°K & 6000°K, Fixture shall be CE compliance.
(a) Recessed Mounting (i) LED Downlight 18/20W.
22
-
2000
... More
[e] Vent Cowel 100mm
4
-
42
... More
[A] Bib Cock with long thread 15 mm nominal size
4
-
649
... More
[g] Coupler
24
-
75
... More
Providing & making heat shrinkable type indoor/ outdoor/straight through terminators/joint kit of Group 1 and approved make suitable for XLPE insulated 11 KV cable with required components, prepration of cable ends testing etc as required of following sizes. 3 core 35/50 Sq mm.
-
-
-
... More
Supply and fixing of oil/Air break starter panel made out of sheet steel powder coated enclsure comprising of over load protection relay. Short circuit & single phasing protection. ON/OFF push buttons, ammeter, volmeter, indicating lamps etc. complete in all repect suitable for following rating motors.
1
-
7850
... More
Centering and shuttering with steel plates/ plywood sheets including strutting, propping, bracing both ways with wooden members and removal of form work ffloor three level for suspended floors, roofs, landings, staircases, balconies, girders ,cantilevers , bands, copings, bed plates, anchor blocks, sills, chajjas lintel beam etc.
1000
-
223
... More
P & F Soap dish or Tray of approved quality / make :C.P. brass heavy & superior quality
4
-
79
... More
Add extra in Flush doors for Sunmica 0.8 mm thick
100
-
497
... More
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work including prepration of base with primer putty lippy complete in all respect.
1520
-
92
... More
[c] Bend 87.5 degree
24
-
110
... More
Providing and fixing of suspended false ceiling in the grid of 600 x 600 mm/ 600 x 600 to 900 x 900 mm using aluminium tees with inter lock system of main tee, cross tee and wall angle (size of tee and angle approx. 35 mm x 25 mmx 0.5mm or equivalent) etc. complete with G.I. Adjustable suspenders skeleton, Ceiling tiles made from multi chamber hollow PVC section having an overall cross section of:- Using 200 x 20 x1 mm section.
142
-
1342
... More
Providing and fixing M.S. sheet single leaf door shutter in angle iron frame 35 x 35 x 5 mm. suitabaly diagonally braced with 25 x 3 mm. flat iron above and below lock rail of size 50 x 5 mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of choukhats, including two coats of anticorrosive red oxide primer paint M.S. Sheet 18 S.W.G.Add extra for double leaf shutters.
3
-
2181.6
... More
Providing and fixing hydraulic door closure ISI marked
11
-
562
... More
Construction of chamber in all type of soil 300mm thick masonry in cm 1 : 6m. 100mm thick cc 1 : 5 : 10 in foundation, 20mm thick insider plaster in cm 1 : 6 , finished with floating neat cement, 50mm thick M-15 grade cc flooring earth work etc. complete as per design including disposal of surplus earth within a lead of 50m. , Inside size 600x450mm. depth up to 0 .5 M & Cement cover with frame.
12
-
2049
... More
S & F tube well cover of M.S. Sheet (6 mm thick) with nuts and bolts complete for casing size: 150 mm dia
185
-
236
... More
Providing & laying P.V.C. / XLPE insulated & PVC sheathed cable of 1.1 KV grade with aluminum conductor of IS : 1554 P-I / IS : 7098 P-I of group 1 of approved make in ground as per IS : 1255 including excavation of 30cm x 75cm size trench, 25cm thick under layer of sand, II class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size: 3.5 core, 50.00Sqmm. Armoured Group 1
100
-
299
... More
Carriage of following material including loading, unloading and stacking if requred complete in all respect : Earth, Sand, lime, Morrum, Manure or sludge,Building rubbish, Stone metal [ Grit and ballast etc. ], Stone for Masonry work & Soling and Excavated rock etc. upto 5 Km. lead
450
-
165
... More
Providing and layiny in position specified grade of cement concrete for RCC Structure elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement ; 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement forWalls (any thickness) including attached pilasters buttresses, plinth and string courses fillets columns pillars pears abutments posts struts etc.M 20 grade nominal mix ( with graded stone aggregate 20mm nominal size)
40
-
5372
... More
P & F Kitchen and lab sink of approved make with C.I. brackets duly painted , 40 mm. C.P. waste coupling, C.P. brass chain with rubber plug , 40 mm G.I. waste pipe upto floor level complete including cutting and making good the wall & floor :1.0 mm. thick Salem stainless steel steek AISI-304 kitchen sink of approved make with large waste coupling : overall size(inches) 24 x 18 x 8 inches
1
-
3450
... More
Making connection of GI distribution branch with GI main including all fitting. Beyond 25mm & Upto 100mm dia
2
-
350
... More
Supply & laying following size earth wire / strip in horizontal or vertical run in ground / surface / recess including riveting, soldering, saddles, making connection etc. as required (a) 8 SWG G.I. (hot dipped) wire
30
-
9
... More
P&F Ist quality standard White / Ivory,Grey, ,Fume Red brown,light green,light blue,other light shades, Glazed tiles of confirming to IS : 13753 & IS:13622 ] of size 300 mm. x 200 mm. in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete [ Excluding the cost of cement plaster on walls pillars ], add extra for using tiles of size 300mm x 450mm.
160
-
860.6
... More
Providing & fixing of IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required. Group l
158
-
18
... More
Construction of Septic Tank in all types of soil with 40 cm. thick masonry in C.M. 1 : 6, 15 cm. thick C.C. bed of 1 : 5 : 10, M-15 grade C.C. flooring & over stone slab covering, 80 mm. thick stone slab covering, jointing of slab in C.M.1 : 3, Ralthal, kharanja,50 mm. thick stone partition walls,20 mm. thick cement plaster in C.M. 1 : 6 finished with neat floating cement, 4 Nos. C.I. foot rests of approved design, two Nos.450 mm. dia. each Ferro cement cover with frame, earthwork etc. complete as per approved drawing including disposal of earth within a lead of 50 mtr., size 400 x 140 x 150 cm. [ for 50 users ]
1
-
34410
... More
Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sqmm. nominal size FR PVC insulated unsheathed flixible cooper earth conductor 1.1 kv grade (IS:694) of approved make in surface / recessed ISI marked MMS (IS : 9537 P -III) PVC conduct & it's accessories, 18 SWG 175mm x 100mm. x 60mm M.S. box with earth terminal, 6 A switch, 6 A socket, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required on board (Group 1)
80
-
90
... More
Providing & fixing brass lock without handle for aluminum door, of approved quality, make & design as directed by Engineer-in-charge
5
-
375
... More
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel tee sections, joints mitred and welded with 15 x 3 mm. lugs, 10 cm. long embedded in cement concrete blocks 15 x 10 x 10 cm. size of 1 : 3 : 6 [1cement : 3 coarse sand : 6 graded stone aggregate 20 mm. nominal size] or with wooden plugs and screws or with fixing clips or with bolt and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
900
-
96
... More
P & F Indian type white glazed vitreous china Ist quality W.C. orissa pan (I.S: 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor. Size 580x440mm
2
-
1738
... More
[C] Angular stop cock with long thread 15 mm nominal size
10
-
633
... More
P & F in position frame made out of M.S. angle (riveted or welded) finished with two coats of red oxide and enamel paint of following sizes as required. 25mm x 25mm x 3mm
10
-
77
... More
P & F reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding [incl.cost of binding wire] all complete upto floor three level, Thermo-mechanically treated bars [confirming to relavent IS code].1786
31500
-
72
... More
Suppy & Installation of D.P. Structure with AIR BREAK SWITCH having following specifications.DP: double pole structure on 2 no ISMB 125 × 70 mm, 10 mtr high using 7 no MS channel each of size 100 mm × 50 mm × 2500 mm complete in all respect with nuts, springs washers, clamps as required.Go: Off load type gang operated 3 pole vertical flute type switch suitable for 11KV ; 400A, 3-ø, central post rotating double break isolator complete with MS hardware, copper moving & fixed contact, assembly of 9 nos pin insulator, GI pipe of suitable length for operation.DO: 3nos Vertical/ Horizontal mounted 11kv horn gap fuse set / drop out 11 kv barrel fuses mounted on 6no pin insulators LA: 3 piece non linear rsistor type. lighting arrestor of approved make suitable for 3 wire, 11 kv Overhead line with rated voltage of 9kv rms & nominal discharge current rating of 5 ka & complete with galvanized clamping arrangement GI bolts, nuts, washer etc. as required. JUMPERS: 3 no 11 kv acsr conductors mounted on pin type insularors as required 6. GENERAL: The go shall b operated by hand operated liver properly earthed with provision for locking mounted at 3'.
1
-
65250
... More
Providing and fixing European type white glazed vitreous china Ist quality WC pan [IS: 2556 mark] P or S trap including cutting and making good the wall and floor.
2
-
1208
... More
P & F GI pipes ( External works ) with GI fittings excluding union (IS:1239 mark) and MS clamps, including trenching and refilling earth etc. 15mm dia Nominal Bore 'B' Class
30
-
179
... More
Providing and laying C.C., 1 : 5: 10 [stone aggregate 40 mm. nominal size] all around of SW pipes including 15 cm, thick bed concrete [width W= Dia. of pipe in cm + 30 cm.] excl. cost of pipe, 150 mm dia. S.W. pipe.
80
-
624
... More
P & F 18 SWG M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side .
42
-
95
... More
P & F IP-65 / IP-66 protected LED street light luminaire on existing bracket. Fixture made from powder coated single piece pressure die cast aluminium housing with Heat dissipation fins on housing with High Power LEDs of CREE/ NICHIA/ OSRAM/ PHILIPS make. Diffuser / Glass cover for ensuring IP65 protection for Lamp & control gear compartment, System Lumen output of 1500-8500 High Power LED, intergrated Driver shall be high efficiency having efficiency 85% and in complinance to IEC standards Systems life of 25,000 Buring Hours with 70% of initial Lumens maintained. Fixture shall be in CE Compliance.
(a) IP-65 protected LED Street Light Luminaire
(i) LED Street Light Fixture 80-90W Group 1
8
-
11500
... More
Random Rubble stone masonry for super Structure above plinth level one storey height above 30 cm. thick wall in cement mortar 1:6 [ 1cement : 6 sand ]
110
-
2313
... More
Providing & fixing of strip type fluorscent tube fitting fabricated from (CRCA sheet and finished with powder coating / stove enamelled paint)/(extruded non corrosive UV resist EP channel) complete with accessories like (OCCB, starter, starter seat)/ EB, rotor holder, terminal block duly prewired with copper conductor including making connection, testing etc. as required. ( without tube) 1 X 36 Watts with EB ( Group-1 )
75
-
377
... More
Supply and Eraction of GI stay set as per Discom specification complete with long stay rod with anchor plate including stay clamps turn buckle and G.I. stay wire tightened through strain insulator in cement concrete 1:3:6 including excavation of pit -re-filling etc as required. Stay set of dia 20mm, 2.4m long stay rod and anchor plate 380x380x6.4mm
4
-
1319
... More
[f] Nahni trape without jali 4"
24
-
105
... More
( b) 25mmx3mm G.I. (hot dipped) strip
65
-
58
... More
Providing & fixing of ISI marked ding dong/musical chime bell including making connection testing etc. as required.
9
-
115
... More
Providing and fixing steel gate, grating and grills made of angles, tees, square bars or other flats,or black pipe with hold fasts and fittings complete as per design and drawing including cutting, welding and fabrication with priming coat of red oxide.
1500
-
83
... More
(b) 2 x 2.5 + 1 x 1.5 Sq mm.
800
-
53
... More
Supply of strainer pipes made of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS: 8110-1995 200 mm nominal bore
50
-
1710
... More
Add extra in Flush doors for double leaf.
18
-
58
... More
Providing batta [gola] 75 mm.x 75 mm. in cement concrete 1 : 2 : 4 including finishing with cement mortar 1 : 3 as per standard design
300
-
32
... More
S & F M.S. clamp, set of 50x6 mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set.
1
-
250
... More
Providing and fixing square bars or other flat welded to window, ventilators etc.
750
-
73
... More
P & F GI pipes ( Internal works ) with GI fittings excluding union (IS:1239 mark) and MS clamps, including cutting and making good the wall and floors, Concealed pipe in wall including anti corrosive bitumen paint 15mm dia Nominal Bore 'B' Class
80
-
190
... More
Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for soil and waste discharge system (IS:13592: 1992 Marked) of approved quality /make 110mm dia
250
-
253
... More
Providing & fixing phenolic laminated sheet 2.0mm thick of size 75mm dia including screws, cup washer as required.
42
-
7
... More
Centering and shuttering with steel plates/ plywood sheets including strutting, propping, bracing both ways with wooden members and removal of form work ffloor three level for Walls [ any thickness ] including attached pilasters, buttresses, plinth and string course
35
-
282
... More
(b) 25 mm
280
-
42
... More
P & F metal clad industral plug top & socket unit with pin and sleeve type contact on porcelain/bakelite base in sheet steel enclosure (without MCB) including making connection etc. as required: Single/double pole ( three pin ) 20 A, Group-1
10
-
725
... More
P & F water closet Seat Covers with brass hinges complete: Solid PVC (ISI marked) grade-1 White for EWC.
2
-
561
... More
Providing & fixing of Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with 100 A copper bus bar, shorting link , neutral link, earth link and din bar, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required.4 Way Double door (Three phase) Gr-1
5
-
1820
... More
Polished Kota stone flooring, skirting laid over 20 mm. thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete for area of each slab from 2001 to 5000 Sq. cm., 25 mm. thick slab
185
-
-
... More
Painting with Enamel paint of approved brand and manufacture to give an even shade:- Two or more coats on New work
410
-
78
... More
P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make Gun-metal 25mm nominal bore.
7
-
540
... More
Providing & fixing of 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required. ( Group-1 ) 6 A to 32 A rating Single pole MCB
75
-
151
... More
(d)2 x 6 + 1 x 2.5 Sq mm.
280
-
109
... More
Plaster on new surface on walls in cement sand mortar 1:6 including racking of joints etc. complete fine finished, 25mm thick
720
-
162
... More
Wiring of light point / fan point / exhaust fan point / call bell point with 1.5 Sq.mm. nominal size F.R P.V.C. insulated unsheathed flexible copper conductor 1.1 KV grade and 1.5 Sqmm. nominal size F.R P.V.C. insulated unsheathed flexible copper earth conductor 1.1 KV grade (IS : 694) of approved make in surface / recessed ISI marked MMS (IS : 9537 P -III) PVC conduct & it's accessories, round tiles, 18 SWG M.S. box with earth terminal, 6 A switch 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required.(Group 1)
-
-
-
... More
STIC of radial/mixed flow submersible motor pump sets ISI marked (IS: 8034-1989) of approved make with required accessories including making connction suitable for T.W./D.C.B./ Open will. The job includes lowering of riser pipe, G.I./ H.D.P.E. pipe with rope, cables, installation of complete fitting and accessories, jointing of electrical cables up to switch board. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect.
100 mm diameter Submersible pump shall have following HP Rating, phase, Head, minimum Discharge respectively, Group 1, 5.0HP, 3-ø, (55-150 mtr.), (166-60) LPM
1
-
28980
... More
(a) 2 x 1.5 Sq mm.
320
-
26
... More
P & F 15 mm. Dia Connection Pipe of approved quality/make: PVC pipe with C.P. Brass nuts upto length, 600mm
15
-
105
... More
P & F Kitchen and lab sink of approved make with C.I. brackets duly painted , 40 mm. C.P. waste coupling, C.P. brass chain with rubber plug , 40 mm G.I. waste pipe upto floor level complete including cutting and making good the wall & floor : Fire clay glazed kitchen sink ( IS marked ) 600 x 450 x 200mm
4
-
2560
... More
Providing and fixing in position collapsible steel shutters with vertical M.S. , Channels 20x10x2mm and bracket with flat iron diagonals 20x5mm, size with top and bottom rail of T-iron 40x40x6mm . with top flat of 50 x 10 mm and bottom flat of 40 x 6 with 40mm dia steel pulleys/ ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer ( To be measured and paid as per outer dimension).With 75 mm opening when closed.
14
-
3177
... More
S & F PCC 1 : 2 : 4 [ M-15 ] Precast kerb on dand upto 60 cm lenth over 20mm thick base of cement mortar 1:6 including jointing earthwork, painting and jointing with cement mortar 1 : 4 of size 15 x 40 cm
50
-
305
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture to aluminium door shutter including cost of cutting floors as required, embedding in floors and cover plate etc. complete as per direction of engineer – in - charge,Confirming to IS:6315
8
-
1285
... More
P & F GI pipes (Internal works) with GI fittings excluding union (IS:1239 mark) and MS clamps, including cutting and making good the wall and floors exposed on wall .50mm dia Nominal Bore 'B' Class
50
-
495
... More
Construction of Tube-well upto 100 meter depth and above in all type of rocks by DTH system and over burden to accommodate casing pipe of following sizes in all types of soil and over burdens including lowering of casing pipes but excluding cost of casing pipes as per IS: 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have throughout bore as per nominal dia of casing pipe: 150mm dia. Nominal bore.
200
-
590
... More
Providing & laying Damp Proof Course with cement concrete grade M – 150 [1 : 2 : 4] mortar prepared with 1% solution of water proof compound,complete as per specification, 50mm thick.
122
-
328
... More
Providing and fixing steel glazed doors, windows and ventilator shutters of standard rolled steel section, joints mitred and welded with steel lugs 13 x 3 mm., 10 cm. long embedded in cement concrete block 15 x 10 x 10 cm. of 1 : 3 : 6 [1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm. nominal size] or with wooden plugs & screws or rawl plugs & screws with fixing clips or with bolts &nuts as required including providing and fixing of plain glass panes 4mm. thick with copper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approved steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots, steel handles, peg stays etc. as required, for overall portion treated as fixed .
8
-
1491
... More
Add extra for mirror polishing on terrazzo / stone flooring, New Surface .
185
-
35
... More
Providing and fixing fully panelled single leaf shutter for doors as per design and drawings with approved ordinary C.P./oxidised steel fittings as per Annexure-"A" and width of styles &top rails of 100 mm and lock rails width of 150 mm and bottom rails of 200 mm width including teak wood beading of size 19 mmx12 mm on both faces complete,30 mm thick, M. P. teak wood grade-I,Wire gauge 24 gauge 14 mesh of IS designation 85 gauge wires of dia 0.58 mm panels.
27
-
4637
... More
P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556 mark), of approve make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS : 1703 mark) complete including cutting and making good the wall: PVC with PVC bend as per IS 7231
2
-
1157
... More
[A] For fixed portions
120
-
341
... More
Supply and erection of P.C.C. /R.C.C. pole as per REC manual no 15/1979 conforming to IS:2905/1966 as per requirement of sec3 in alignment including excavation of pit and back filling with stone aggregate/ boulders and soil in 0.45m consolidating each deposited layer of 0.45m by ramming and watering etc complete in all respect: 9.0 Mtr. long ( 200Kg. ) as per discom specification
5
-
3859.2
... More
P & F external grade board, solid core (tripple core)single leaf boiling water & termite resist flush door shutters IS : 2202-67 marked using Phenol formal dehydreresin glue both sides with approved steel fittings complete as per Annexure 'A', 35 mm. thick with commercial veneer both side.
46
-
2418
... More
Providing and fixing anodized aluminium work ( anodizing to be done from approved Anodizer ) for doors, windows, ventilators and partition with extruded built up standard tubular section and other sections of approved make conforming to IS : 733 and IS : 1285 anodised transperent 81 dyed to required shade according to IS : 1868 ( minimum anodic coating of grade AC 15 ) , fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up to gap at junctions, at top, bottom and sides with required PVC / neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, Al. tower bolt & Al. handle & aldrop etc. all complete as per architectural drawings and the directions of Engineer - in – charge [glazing and panelling to be paid separately ]
-
-
-
... More
Providing and layiny in position specified grade of cement concrete for RCC Structure elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement ; 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement fo Beams, suspended floors, roofs, griders having slopes up to 15° , landings, balconies , shelves ,chajjas, lintels, bands ,plain window, sills ,staircases and spiral staircases M 20 grade nominal mix ( with graded stone aggregate 20mm nominal size)
144
-
5244
... More
Supply and fixing of 'V' type cross arms made of MS channel on the existing poles complete including all necessary nut and bolt etc. with campus as per Discom specification. 11kV cross arms (75× 40×6.8 kg/mtr)
5
-
850
... More
Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for soil and waste discharge system (IS:13592: 1992 Marked) of approved quality /make 75mm dia
30
-
127
... More
Providing & fixing TP&N 415 V side handle operated bouble break fuse switch unit in sheet steel enclosure confirming to IS : 13947 P III and IS : 4064 (W/O HBC fuse) including making connection with suitable lugs etc. as required. 200 A rating Group l
1
-
9877
... More
P& F Towel rail or ring of approved quality/make C.P. brass Towel rail with brackets, size 600 mmx20 mm.
4
-
309
... More
Supply of ERW M.S. block casing pipe ISI arked (IS: 4270/1992) of grade Fe 410 of following sizes at site of work. Nominal bore of pipe 150mm Outside dia of pipe 168.3mm Thickness of pipe 5.0mm Mass of plane tube 20.13(Kg.\m)
50
-
1165
... More
Providing and laying in position cement concrete including curing compaction etc. complete in specified grade, excluding the cost of centering and shuttering – all work up to plinth level using crusher broken aggregate1:4:8 [1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm. nominal size]
155
-
2896
... More
Providing and fixing 1 mm thick M.S. sheet garage door shutterswith frame of 40 x 40 x 6 mm. angle iron 3mm M.S. gusset plate at the junction and corners including all fittings,and applying a coat of approved steel primer (excluding cost of frame) using M.S. angle 40 x 40 x 6 mm. for diagonal braces
18
-
2185
... More
Construction of Manhole in all types of soil inner size 90 x 60 cm. with 300 mm. thick masonry in CM 1:6 and 10 cm. thick CC 1:5:10 in foundation, 20 mm thick inside plaster in C.M. 1:6 finished with floating neat cement, 50 mm. thick M. 15 grade C.C. flooring, making channels, 80mm. thick stone slab covering with 40mm. M-15 grade C.C. flooring, Ferro cement cover with frame of 450mm. dia., earth work etc. complete as per design including disposal of surplus earth within a lead of 50 mtr., depth upto 0.5 m.
6
-
3542
... More
Finishing with neat cement [ punning ]
250
-
28
... More
6 mm cement plaster to ceiling of mix 1: 3 [ 1 cement : 3 fine sand ]
560
-
128
... More
Providing of sythetic rope for submersible pump ISI marked (IS:5175) of following sizes 20mm (Suitable for 90mm OD pipe)
130
-
38
... More
P & F GI pipes (Internal works) with GI fittings excluding union(IS:1239 mark) and MS clamps, including cutting and making good the wall and floors.exposed on wall 25mm dia Nominal Bore 'B' Class
50
-
293
... More
Construction of chamber in all type of soil 300mm thick masonry in cm 1 : 6m. 100mm thick cc 1 : 5 : 10 in foundation, 20mm thick insider plaster in cm 1 : 6 , finished with floating neat cement, 50mm thick M-15 grade cc flooring earth work etc. complete as per design including disposal of surplus earth within a lead of 50m.,Inside size 300x300mm. depth up to 0 .5 M & Cement cover with frame.
12
-
1440
... More
Half brick masonry in super structure up to third storey incl. cost of nominal hoop reinforcement [ 2 nos,6mm dia M.S. bars at every fourth course ] using bricks of class designation 75 in Cement mortar 1 : 4 [1 Cement : 4 coarse sand]
80
-
468
... More
Stone slab roofing on ground floor with fine grained stone slab from approved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1 : 4 , ralthal, stone kharanja, lime terracing 90 mm. average thickness [ as per JAIPUR PRACTICE ] with ceiling pointing in cement sand mortar 1 : 3 complete as per specification for span above 2.50 Mtr. and upto 3.00 Mtr.
12
-
1771
... More
Providing and fixing unplasticized polyvinyl chloride (UPVC) SWR pipes fittings type B for sciland waste discharged system (IS : 13592 : 1992 marked) of appproved quality / make 110mm dia.
-
-
-
... More
[B]For shutters of openable doors, windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockers shall be paid for separately )
80
-
375
... More
P&F bus bar chamber housed in sheet metal box made out from 2.0 mm thick powder coated CRCA sheet front openable bus bar made out of aluminium or wrought aluminium alloy suitable for 300 amp Capacity bus bar fixed on porcelain insulators at approved spacing including making connections etc. as required. (a) 450 mm long, 4 strip (Gr-1)
1
-
1788
... More
Filling in plinth with locally available river shingle under floors including watering, ramming, consolidating and dressing complete including cost of river shingle.
450
-
845
... More
Supplying and making one end termination with heavy duty single compression brass gland SIBG type, aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size : 3.50 x 50.0 sq.mm
4
-
132
... More
Providing & fixing of fluorescent tube rod in existing in fixtures as required flourescent powder coated 36/40 watt ( Group-1 ) (Minium 3 star rating)
75
-
63
... More
Making grooves as per design in plaster 10 mm to 20 mm wide.
1500
-
8
... More
Supply and fixing 11kv Pin insulator (IS 731/1971) with minimum creepage distance of 300mm on existing bracket including all accessories like hot dipped GI spindle and nuts etc (as per specifiction of Discom).
9
-
135
... More
Providing & fixing Ist quality WVC Urinal [IS 2556 mark] with 25 mm. dia. G.I. waste pipe, dome waste coupling, concealed iron brackets or screws etc. , Flat Back [large] or half stall ,Size 355 x 355 x 535 mm.
3
-
2903
... More
Centering and shuttering with steel plates/ plywood sheets including strutting, propping, bracing both ways with wooden members and removal of form work ffloor three level for columns,pillars,posts and struts etc.
402
-
274
... More
P&F bolted type/ Din type HBC (High breaking capacity) fuse links of 80 KA breaking capacity, conforming to IS:13703 in the existing fuse base, fuse switch unit etc. of the following type and rating. ( Group l) Central tag type .160 A to 200 A
3
-
183
... More
S&F of street light bracket made out from following size of 'B' class GI pipe with heavy duty pole clamp, saddles suitable fasteners etc. as required (Gr. I ) 32mm. Dia
10
-
410
... More
Plate earthing as per IS : 3043 with GI earth plate of size 600mm x 600mm x 3.0mm by embodying 3 to 4mtr. below the ground level with 25mm dia GI 'B' class watering pipe including all accessories like nut, bolts, reducer, nipple, wire mesh funnel & CC finished chamber covered with hinged type with locking arrangement CI cover, CI frame of size 300mm x 300mm complete with alternate layers of salt & coke / charcol, testing of earth resistance as required
7
-
4250
... More
P & F GI pipes ( External works ) with GI fittings excluding union (IS:1239 mark) and MS clamps, including trenching and refilling earth etc. 50mm dia Nominal Bore 'B' Class
80
-
517
... More
Supply & drawing overhead steel core aluminium conductor (ACSR) ISI marked (IS 398 part II-1996) on existing cross arms through insulator with all necessary T&P required including binding and twisting etc. complete in all respect as required as per Discom specification . 50 Sq.mm of (6+1) 3.35 mm (Insulated Rabbit)
450
-
62
... More
Providing and fixing 30mm thick factory made Solid Panel PVC Door Shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and sizes of 19mm for styles & 15x15mm for top and bottom rails . M.S. frame shall have a coat of steel primers of approved make and manufacture, M.S. frame shall be covered with 5mm thick heat moulded PVC 'c' channel of size 30x50mm forming styles and 5mm thick, 75mm wide PVC sheets for top rail, lock rail and bottom rail on either side & 10mm ( 5mm x 2 ) thick 20mm wide cross sheets as gap insert for top, lock and bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rail with 30mm wide x 5mm thick PVC sheet beading on either side the jointed together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be struck on the interior side of the 'C' Channel using PVC solvent cement adhesive etc. complete as per direction of Engineer- in charge , manufacture's specification & drawing ( For W.C. & Bathroom shutters ), incuding all door fittings such as Hinges,L-drop, Handles, Locking bolts etc. as per approval of Enginner-in-charge.
8
-
2838
... More
P & F GI pipes ( External works ) with GI fittings excluding union(IS:1239 mark) and MS clamps, including trenching and refilling earth etc. 25mm dia Nominal Bore 'B' Class
60
-
281
... More
(e) 4 x 10.0 Sq mm.
10
-
305
... More
Providing and fixing C.P. flange for 15 mm dia taps
16
-
12
... More
P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete.Size 600 mm x 600 mm
290
-
1190
... More
Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3 mm. with suitable screw at not exceeding 150 mm. distance.
54
-
501
... More
(c) Long point (up to 10 mtr..)
105
-
474
... More
Providing & Fixing of HDPE pipe ISI mark (IS: 4984/95) for water supply (suitable for submersible & jet pump) with required fitting. 63mm OD 6kg./cm2
130
-
119
... More
P & F double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. 1200 mm sweep ( Group 1 )
42
-
1451
... More
Supply & fixing of power plug point acessories on 18 SWG metal box of size 175 x 100 x 60 mm on surface recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 Amp. Switch & socket out let making connections , testing etc. as required ( Group-1 )
75
-
235
... More
P&F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board / sheet including making connections with lugs , testing etc. as required : 100A rating (four pole isolater) Group I
5
-
746
... More
Providing and fixing 12mm thick prelaminated three layer medium density ( exterior grade ) particle board grade I, type II conformong to IS : 12823 bonded formaldehyde synthetic resin of approved brand and manufacture in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge : Pre laminated particle board with decorative lamination on both sides
6
-
1082
... More
(a) 20 mm
200
-
32
... More
Providing & fixing socket size flush type 120/280 watt rotary 5 step fan regulator including making connection testing etc. as required ( Group l)
42
-
210
... More
[B] Long Body Bib Cock 15 mm nominal size
4
-
840
... More
Providing and injection chlopyrifous emulsifiable concentrate 20% with 1% concentration for PRE CONSTRUCTIONAL anti termite treatment as per IS 6313 part III as amended from time to time and creating a contonuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which approach is to be laid surrounding of pipes and conduits etc. complete as per specification [plinth floor area only shall be measured for payment]
555
-
249
... More
P & F GI pipes ( External works ) with GI fittings excluding union (IS:1239 mark) and MS clamps, including trenching and refilling earth etc. 32mm dia Nominal Bore 'B' Class
30
-
315
... More
Providing and fixing glazing in aluminium doors, windows, ventilator, shutters and partition etc. with PVC / neoprene gasket etc. complete as per architectural drawings and directions of Engineer - in – charge [ cost of aluminium snap beading shall be paid in basic item ] : with glass panes of 5.0 mm. thickness [ weight not less than 13.75 Kg / Sqm.] as per IS : 2835
10
-
933
... More
Centering and shuttering with steel plates/ plywood sheets including strutting, propping, bracing both ways with wooden members and removal of form work for foundation in basements, rafts, footings, bases of columns etc; upto plinth level
550
-
161
... More
(c)2 x 4.0 + 1 x 2.5 Sq mm.
800
-
77
... More
P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make: Gun-metal 15mm nominal bore.
6
-
285
... More
[E Pillar cock 15 mm nominal size
4
-
682
... More
b) Outdoor Type
2
-
5200
... More
(a) Short point (up to 3 mtr.)
25
-
215
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements