Maharana Pratap University Of Agriculture And Technology Tender

Earth work in surface excavations not exceeding 30 cm. in depth but exceeding 1.5 metre in width as well as 10 sqm on plan including disposal of excavated earth upto 50 Mtr. And lift upto 1.5 Mtr. Disposed soil to be leveled and neatly dressed: All kinds of soil.

Providing and laying in position cement concrete including curing compaction etc. complete in specified grade, excluding the cost of centering and shuttering – all work up to plinth level using crusher broken aggregate1:4:8 [1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm. nominal size]

Random Rubble dry stone kharanja under floor

Random rubble stone masonary for foundation and plinth in cement sand mortar above 30 cm thick wall in: Cement mortar 1:6 ( 1 Cement : 6 Sand )

Random Rubble stone masonary for superstructure above plinth level one storey height above 30 cm. thick walls in :Cement mortar 1:4 ( 1 Cement : 4 Sand ), Extra for Pillar masonary including bed plates as per specifications up to 45 cm length and all sides are free

Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of form work for foundation in basement, rafts, footings,straps, beams, bases of columns etc; upto plinth level

Providing and laying in position specified grade of reinforcement cement concrete all RCC structural elements upto plinth level including curing compaction finishing with rendering in cement sand mortar 1:3 ( 1 cement : 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement : M20 Grade nominal mix (with graded stone aggregate 20mm nominal size)

Providing & Fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding [incl.cost of binding wire] All complete upto floor three level, Thermo-mechanically treated bars (confirming to relavent IS code1786)

Structural Steel work welded in built up sections, trusses and frame work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5 m. height in flats,tees, angles and channels.

Providing and fixing steel gate, grating and grills made of angles, tees, square bars or other flats,or black pipe with hold fasts and fittings complete as per design and drawing including cutting, welding and fabrication with priming coat of red oxide, Add extra of square rectangular hollow tubular section are used.

Supply & fixing dressed sand or other approved stone shelves, tands in cement mortar 1:3 with fine dressed edges. 25mm thick.

Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finished, 20mm thick

Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finished, 25mm thick

Finishing with neat cement [ punning ]

Providing & laying 25 mm thick buff polished ramp mosaic tiles chequerred plain cement concrete embossed to specially manufactured non-slipping tiles of approved make 25mm thick laid on 20mm thick bed of cement mortar 1:6 jointed with neat cement slurry complete

Providing & fixing of Precast concrete interlocking blocks of M-30 grade manufactured from fully computerised automatic stationary hydraulic vibro-pressed machine and fully computerised automatic batching plant class A1 / A2 as per BS : 6717-2001 with rubber mould technology including painting with lacker polishing. The C.C. interlocking paving blocks be laid on average 50mm, thick bed of coarse sand and the joint is to be filled with fine sand . Laying procedure on compacted sub base as defined. Compete job is to executed as per the instruction of Engineer-Incharge.The rates to be incusive of all lead, lift and taxes. General specifications of blocks : [1] Shape as defined by Engineer-incharge, [ 2] Tensile splitting strength and breaking load as per BS 6717 : 2001, [3] Colour : Grey cement natural colour, [ 4] Variation in dimension : less than 1.6mm, [5] Variation in thickness : less than 3.2mm., [6] Abrasion : As per BS 6717 : 2001 :-- 80mm. thick interlocking blocks

Applying Birla / JK white cement based putty or cement plaster surface for making even surface

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : two or more coats on new work including prepration of base with primer putty lippy complete in all respect.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : one or more coats on old work.

Repair to cement plaster in cement mortar 1:6 [1Cement : 6 fine sand] including removal of old plaster in regular shape and white or colour washing.

Repair to cement plaster in cement mortar 1:6 [1Cement : 6 fine sand] including removal of old plaster in regular shape and white or colour washing, Add extra over item if external scaffolding to be used for repair works

Dismantling tile work in floor & roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead - for thickness of tiles 10 mm to 25 mm

Dismantling stone slab/terrozo chip flooring laid in cement mortarwith including stacking of serviceable material and disposal of unserviceable material within 50 Mtr. Lead.

Dismantling stone rubble masonary including stacking of serviceable material and disposal of unserviceable material within 50 meters lead : in cement mortar