Local Self Government Department Tender

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

rick work with FPS bricks of class designation 75 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)

Cement plastering including T&P, scaffolding, material and complete labour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : including Providing /mixing of synthetic fibers compulsorily complying with IS 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of Cement i.e. 125 gms per 50 kg Cement up to 900 gms per cum of Concrete/ mortar 1:3 (1 cement : 3 fine/ coarse sand)

Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Jhunjhunu / Jalore (Red / Chocolate Colour)

Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding: New work (Two or more coats applied @ 3.84 kg/10 sqm).

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Supplying and fixing machine cut fine dressed Red/Pink sand stone dasa or coping, with full moulding if required laid on cement mortar 1:4 including pointing with admixture of pigment matching with the stone shade.50 mm thick

Supplying and fixing machine cut dressed 75 mm Pink sand stone (Bansi Paharpur) dasa/ coping with ornamental shape having moulding and "PAN Shape" engraving as per required pattern with engraving depth of 5 mm (average) in single piece of length 90 cm to be laid on cement mortar 1:4 (12 to 20mm thick) including pointing with admixture of pigment matching with the stone shade.

Stone work (machine cut edges) for wall lining etc. (veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of cramps which shall be paid for separately) :Red sand stone - exposed face fine dressed with rough backing 30 mm thick.

SITC of Single Stage, water cooled, High Speed (2880 RPM), Horizontal, Centrifugal, Openwell Submersible pumps set pre filled with coolent water and fitted with mechanical seal - T/C Vs T/C, Thrust bearing shall be of carbon + S.S.The stator body of single phase pump shall be of SS and rest of all shall be of cast iron. All casting parts should be cathod electro deposition (CED) coated and other construction material should be confirming to IS : 14220: 2018 . The overall performance of pump shall confirm to BEE energy efficiency level of 3 star. Valid BEE certificate from OEM must be submitted for the same. Motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011, including making connection etc as required complete in all respect. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .7.5 HP, 3-Ø, (12 -32) Mtr, (1240-475) LPM

SITC of Contactor OEM Fabricated DOL/Star-Delta Starter panel with switchgear selection as per Type-2 Cordinatiom Chart and made out from 1.6 mm thick powder coated CRCA sheet, enclosure comprising of over load protection relay, short circuit & single phasing protection, Illuminated ON / OFF push buttons, ammeter, voltmeter, indicating lamps etc. suitable for following rating motors complete in all respect. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .7.5 HP to 10.0 HP ( Star / Delta starter )

Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Un-armoured Copper cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with electrolytic grade Copper made of copper rods confirming to IS 613-1964, of purity 99.7 %, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray (with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 1.5 Sq. mm 4 core

2 core

6.0 Sq. mm 3 core

Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity 99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 50.0 Sq. mm 3.5 core

Supply and fixing Glass Mosaic tiles of 20 X 20 X 4 mm size of approved shade and design with required adhesive over bed of 15 mm thick cement, sand mortar 1:3 including nicely finished joints. Thickness of joints shall not be more than 1.5mm using water proof joints filler (as recommended by manufacture) & finished with flush pointing in white cement mixed with pigment to match the shade of tiles. Complete work as required in all respect.

Designing, supply, erection, commissioning and testing of Bubbler Jet/ Vertical Aerating Jet Fountains. The Bubbler Jet nozzles made of brass with nickel plating with excellent finish complete in all respect make Famous fountains

SITC of Swing Joints made of Brass nickel plating with excellent finish complerte in all respect make Famous Fountains

Designing, supply, erection, commissioning and testing of 12.5" Round Shape Curtain Fountain including 84 Nos. Brass Made Nozzles for Water effect. It includes Fountain Header Made of GI Material With required Fabrication Job work, Powder coarting work etc complete in all respect. Make :-Famous fountains

Supply, Installation, testing and Commissiong of 20ft Dia Ring Made of 2-1/2" GI B class pipe with welding of Flanges, scokets, nut bolts including complete powder coating on surface.

Supply, Installation, testing and Commissiong of 15ft Dia Ring Made of 2-1/2" GI B class pipe with welding of Flanges, scokets, nut bolts including complete powder coating on surface.

Supply, Installation, testing and Commissiong of 10ft Dia Ring Made of 2-1/2" GI B class pipe with welding of Flanges, scokets, nut bolts including complete powder coating on surface.

Designing, Supply, erection. Commissioning and testing of IP68 Protected underwater lighting system manufactured by ISO certified firm Premier/Famous fountains with dynamic colors red, Green, blue shall consist of 9 X 3W(27Watt), 12 V DC Led lamps Mounted on MCPCB comprising high quality water proof luminaries. The Luminaries shall have die cast aluminum alloy helices for strength and totally protected by fused epoxy polyester coating on all surfaces. The wall thickness of Luminaries not less than 5 mm. The wiring shall be reputed make double insulated PVC within copper conductor. The Connection shall be fully water proof. All external nuts, bolts and stands of stainless steel.

Providing and fixing of DMX Based 7-station Microcontroller based Led Light controller suitable for led lighting system with 12 V DC/50A Output.

Supply and fixing of regulating valves of various sizes accordingly as per site requirements.

Designing, supply, erection, commissioning and testing of Plumbing In 2" GI B class/UPvc Pipes Make-TT Swastik/JIndal as per site, Diffuser Nozzles for Water Fall Effects, Welding of Riser Sockets, Flanges welding, Inlet Sockets, Unions, Sockets etc. Complete pipe and fitting are powder coated with required Header for Pump Connection.

Providing & Fixing of 4" S.S. 304 grade wire mesh Mesh Filter for Pump filtration of water at inlet of mono submersible pump. Filter made out of M.S.Sheet & Flats with inlet threaded nipple as per pump inlet. The S.S.mesh fitted on filter body with Screws.