Local Self Government Department Tender

Providing and laying damp-proof course with cement concrete grade M-150 (1:2:4) mortar prepared with 1 % solution of water-proof compound) including two coats of hot blown bitumen (2 Kg. Per Sqm.) complete as per specification with glass strip 3 mm thick at a distance of 1 Meter interval :50 mm thick.

Add extra over item no.5.1 for brick work in s/s up to thirs story

Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finished 12mm thick. (Inner-Outer Side)

Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide.

Painting with enamal paint of approved brand and manufacture in all shades to give an even shade.Two or more coats on new work.

Construction of embankment with approved material obtained from borrow pit with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 tonne to meet requirement of table 300-2 including cost of compensation for earth taken from private land complete as per MoRT&H specification clause 305. (Lead taken upto 5 km)

construction of tube well from graund level and up to 100 mtr depth and abobe sizes in ali type of soils I alluvim strata by baling methodand with outgraund packing and per (IS 2800 part I & II ) 1979 specification the wori ncluding formation activity well at cavity well at caviry will be botom by developemani with approproate are compressor ar bailer pumping and aowerry all casing or pipe but exluding cost the casing pipe the tube well she have a through out bore as per omal bore as casing pipe the work should completed after obtaingsand free water 125 mm dia nominal bore.

110 mm dia PVC pipe 6 kg/cm 2 pressure

Providing & leviling of HDPE pipe hings pipe complete in all respest (32 mm dia class B) (as per market rate )

supplying & instalation of submersible pump motar pump ISI marked (IS 8034/1989 of apprv. Make like KSB kirloskar etc. or quivalent making conection suitable for TW & DCB/ open well complete in all respect 1.5 HP 46-18Lpm

Providing and laying PVC insulates sub mersible cable with copper conductor of supreior quality including marking connection etc. 4 sq mm

Pannel box SITC of wall/free stardom floor mounted dust and vermin proof compartmentalized cubical panel made out of CRCA sheet, required hardware, duly treated for degusting in 7 tank process with dephosphating and with powder coating on both side of panel in desired shade the panel having PU/Neoprene rubber gasket of not less than 3mm thickness, separate detachable gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear, thickness of sheet shall not be less than 1.6 mm upto 600 mm length/width of any compartment and be of 2.0 mm above 600mm load bearing structure shall be of 2.0mm thick sheet supported bybase M.S. channel if required. side walls and alble alley compartemnts having bolted type doors with/without detachable extension type structure. (only outer area on all sides shall be measured & panel to be fabricated for CPRI approved fabricator)