Local Self Government Department Tender

Filling local sand in trenches, plinth ,sides of foundation, under floor etc. in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering including all leads and lifts

Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formwork for foundations in basements rafts, footings, strap beams, bases of columns , etc. up to plinth level.Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands , coping, bed plates, anchor blocks, sills, chhajjas lintel, beam etc.

Providing and fabricating steel reinforcement for R.C.C. work including straighterning cutting, bending, palcing in position and binding complete (including cost of binding wire) all complete upto floor three level. Hot rolled deformed bars (IS 1139)

Brick work in super structure up to third storey with stectled bricks of class designation 75 in cement mortar 1:6

Reinforced cement concrete works in walls (any thickness) including sttanched pilasters, buttresses, plinth and stering courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor three level including curing compaction, finishing with rendering in cement sand mortar 1:3 (1 cement :3 coarse sand ) and making good the joints exchiding cost of centering shuttering and reinforcement. 1:1.5:3 (1 cement :1.5 coarse sand :3graded stone aggregate 20 mm nominal size.

Half brick masonry in foundation & plinth using bricks of designation 75 with nominal hoop rainforsed (2 Nos. 6mm MS bar) at every fourth course in for hoop rainforcement 1Sqm. 6mm MS bar 2x2x1.00 = 4.00 Cement mortar 1:4 (1-Cement:4-coarse sand)

Plaster on new surface on walls in cement sand mortar 1:6 including racking of joints etc. complete fine finished 12mm thick.

Grading roof water proofing treatment with :Cement concrete 1:2:4 (1-Cement:2-coarse sand :4-graded stone aggregate 20mm nominal size).

Providing and fixing Ist quality standard White/Ivory Glazed Tiles ISI marked (IS:13753) of size 300mmx200mm (or any other)in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster).Category-I Kajaria, Jhonson, Orient, Somani make etc.

Providing and fixing regid PVC Pipe (IS 4985 mark) class II /(4 kg/cm2) aproved quality/make incliding joining the pipe with solvent cement rubber ring and lubricant 110 mm dia

75mm dia

Finishing walls with water proof cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding on new work (Three or more coats)

Painting with enamal paint of approved brand and manufacture in all shades to give an even shade.Two or more coats on new work.

Providing and fixing angle iron frame 25x25x3mm for ventilators with fixed wire gauge 16 mesh 24 gauge including 100 mm square bars at interval of 100 mm welded screwed to frame with mental beading 20x3m complete in all respect as per design.

P & F Indian type white glazed vitreous china Ist quality W.C. orissa pan (IS:2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor :Size 580x440 mm.

P & F Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : PVC with PVC bend as per IS : 7231

P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall :Size 510 mm x 250 mm

P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design.2000 litres capacity.

P & F Ist quality WVC Urinal (IS:2556 mark) with 25 mm dia G.I. waste pipe, dome couplings, concealed iron brackets or screws etc. complete.Flat Back (large) or half stall size 590x375x390 mm.

P & F Marble Urinal Partition slab both sides polished of approved design cut from marble size 900x600mm.Makrana II quality marble having light spots.

Providing and fixing Granite stone slab mirror polished and machine edge cut in Walls, Pillars, Steps, Shelves, Sills, Counters. Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 jointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with pigment to match the shade of the marble slab complete including grinding, rubbing and polishing of:Green/Black/Other granite Size above 3600 Cm2

Providing & fixing anodizing alumium work (Anodizing to be got done from approved Anodizer) for doors, windows, ventilators and partition with extruded built up standard tubular and other sections of approved make confirming to IS : 733 and IS : 1285 anodised transparent 81 dyed to required shade according to IS : 1868 (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gas at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required inlcuding cleat angle Aluminum snap beading for glazing/paneling, C.P. Brass/ Stainless Steel screws, Al. Tower bolt & Al. handle & Al. Aldrop etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and peneling to be paid for separately). For shutters of doors, windows & ventilators incl. providing and fixing hinges/ rollers etc. and making provision for fixing of fittings wherever reqd. (lockes shall be paid for separately).

Providing and Fixing 12mm thick prelaminated three layer medium density (exterior grade) particle bonded formaldehyde synthetic resin of approved brand and manufacture in paneling fixed in aluminium doors, windows/ stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.

Providing and fixing glazing in aluminium door, window, vintilator shutters and partitions etc. with PVS/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost. of aluminium snap beading shall be paid in basic item.)with tinted glass panes of 5.0mm thickness (weight not less than 13.75 Kg/ Sqm)

P&F double action hydraulic floor spring of approved brand and manufacture to aluminium door shutter confirming to IS : 6315 incl. costof cutting floors as reqd. embedding in floor and cover plate etc. complte as per direction of Engineer in charge.

Providing and fixing brass lock without handle for aluminium door, or approved quality, make & design as directed by Engineer incharge

Providing & laying vitrified Porcelain dianomite floor tile, skirting, dedo, (Johnso, Euro, Naveen, Bell or equivalent etc.) size 600x600, 10 mm thick flooring over 20 mm thick bed mortar 1:4 mix with 2-3 mm thick joint to be filled with cementious grout or polymer based non shrink grout make Rofee/ Bell adhesive/ pidite etc of matching colour as per requirement of site.

P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors :Class B, 15 mm dia nominal bore.

25 mm dia nominal bore.

Construction of septic tank in all types of soil with 40cm thick masonry in CM 1:6 15cm thick CC bed of 1:5:10 M-15 grade CC flooring & over stone slab covering, 80mm thick slab jointing of slab in CM 1:3, Ralthal, Kharanja, 50mm thick stone partiton walls, 20mm thick plaster in CM 1:6 finished with neat floating cement, 4Nos C.I. foot rests of approved design, two No. 450mm dia 25Kg each C.I. cover with frame, earth work etc. complete as per approed drawing incl. disposal of surplus earth wtihin a lead of 50mtr. Size 400x140x150cm (for 50users)

Construction of soakage well in all types of soil of approved drawing, top 90cm portion in 450mm thick masonry with CM 1:6, 80mm thick stone slab covering, jointing of slab in CM 1:3, Ralthal, Kharanja 40mm thick M-15 grade C.C. flooring, earth work etc. complete incl. disposal of surplus earth within alead of 50mtr Inner dia 60cm & 10 to 12 mtr deep

Sainatry fittings

Electrification