Local Self Government Department Tender

P/Laying ISI marked P.V.C. insulated submersible cable confirming to(IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, existing pipe / open trench / Cable tray / on surface including making connection etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR . 6.0 Sq.mm 3 core flat

SITC of Radial / mixed flow ISI marked water and anti-corrosive liquid filled submersible motor pump sets suitable for 100/150mm dia borewell. The size of adopter fixed on top of the motor should exceed the top of coupler , for safegaurd the coupler. The construction material of motor and pump should match IS: 8034 : 2018 and IS: 9283 guideline. The radial flow pumpset should operate at 5 star energy efficiency level of BEE and mixed flow pump set should operate at 3 star energy level of BEE, accompained by valid BEE certificate. Motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011 with required accessories including making connection suitable for Bore well. The job includes labour part of lowering of riser pipe G.I./ H.D.P.E. with rope, cables & pump, installation of complete fitting and accessories, jointing of electrical cables up to Starter. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 70.6.1 100 mm diameter Submersible pump shall have following HP Rating, phase, Head range, Discharge range respectively.. 1.5HP, 1-Ø, (11 - 94)Mtr, (40 - 10) LPM

Providing & Laying of Polypropylene rope Confirming to IS:5175 for submersible pump of following sizes. complete in all respect. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . .16mm (suitable above 50mm & up to 75mm OD pipe)

Providing & Fixing of HDPE pipe Confirming to IS:4984:2021 for water supply suitable for submersible & jet pump with required fittings ie socket, elbows, tee etc. complete in all respect. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .for vertical installation40 mm OD 6 kg / cm2

SITC of Contactor OEM Fabricated DOL/Star-Delta Starter panel with switchgear selection as per Type-2 Cordinatiom Chart and made out from 1.6 mm thick powder coated CRCA sheet, enclosure comprising of over load protection relay, short circuit & single phasing protection, Illuminated ON / OFF push buttons, ammeter, voltmeter, indicating lamps etc. suitable for following rating motors complete in all respect. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSRFor single phase Submersible / Monoblock pump0.5 HP to 1.5 HP (DOL starter)r

SURF BOARD Provoding and fixing of Surf Board of size 910mm (Length) 860mm(Width)x:400mm(Height) fabricated with a center pipe of 100mm nominal bore shall be made form 'C' class G.I. Pipe the steeve pipe shall be made of 125mm OD seamless pipe with thickness of smm and bolted to main frame with M10 SS bolts, the bottom Support shall be welded of M.S. Plate of Q 250 mm & 10mm thickness, the handle frame of 25NB shall be made from 'C' class G.L. pipe the paddie frame of 50NB shall be made from 'C' class G.I. pipe supported with 70X8mm bend M.S. flat and can be replacable the foundation to be used for fixing should be a structure and shall be made from center pipe G.I. of 80NB 'C' class welded with M.S. round plate of 250mm & 10mm thick. main pipe shall be supported with 25mm x 25mm M.S. angle of 3mm thickness and 20mm x 40mm CRC square pipes of 3 mm thickness. boshes shall be used of 70 mm Outer Diameter with 5mm thickness. the footests shall be made from aluminum casting material of size 320ins to be used of diameter 35mm,25mm and 17mm shall be made up from SAE 8620 bright the bearings shall be used of "6007zz" "62 and "6203zz" permanent lubricated sealed bearings shall be used of "6007zz" () high tensile steel with galvanized nuts and bolts shall be used for assembly, the powder coating shall be done with pure polyester poeders of ackzonoble of berger paints with 60 to 70 Micron thickness. A16, A24 mm circlips shall be used for assembly. bolt M8X16 mm and NY lock nut of M8 shall be madeof SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust, all complete as per drawing design. directions and approval of engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing

CROSS TRAINER Providing and fixing of cross trainer of size 1320 mm (Length) x 600mm (width) x1750mm (Height) fabricated with the main frame pipes of 80 NB shall be made of 'C' Class G.I and pipe with single bend pipe ith 250mm radius. The bottom support of M.S. round plate of 250 mm & 10mm thick. the Handle frame shall be made up of 25NB "C" Class G.I. Pipe the foundation Should be used for fixing is a structure and shall be made from center pipe of G.I. pipe of 80 NB "C" Class weled with M.S. round plate of 250 mm & 10mm thick. Main pipe should be supported with 25mm x 25mm M.S. angle of 3 mm thickness and 20mm x 40mm and CRC Square pipes of 3mm thic to build structure bushes to be used which shall be made from M.S Pipe of 60mm OD with 5 mm thickness, the footrests shall be made from Aluminium casting material of size 130mm X310mmx5mm thickness and mounted on M.S. plate of size 130mmx310mmx3mm thick. Pmm x270mmx5mm for support to footrest of 200mmX250mm with 3mm thickness M.S. plate shall be used closting caps shall be made up of high quality fiber reinforced plastic material, the bearing shall be used are of "6007zz" permanent lubricated sealed bearing of reputed brand (SKF/FAG), High tensile steel with galvanized nut bolts shall be used for assembly. the carclips shall be used for assembly of berger with 60 to 70 micron thickness. all complete as per drawing, design, directions and apporoval of Engineer- ncharge regarding material, shape of equipment, colour (of Metal, seat and pedal), and fixing of equipment etc all. shape of.

Provoding and fixing of thi-chi spinner (2 wheel) of size 700mm (length) x 1000mm (width) x 1280mm (height) fabricted with a center pipe of 200NB Shall be made up of "C" class G.I. pipe the handle movemetn round frame shall be made up from 25 NB "C" class G.I. pipe the foundation should be used for fixing is a structure and shall be made from center pipe of G.1. 80NB "C" class welded with M.S. round plate of 250mm & 10mm thick main pipe shall be supported with 25mm x25mm M.S. agnles of 3mm thickness and 20mm x 40mm CRC squre pipes of 3mm thickness. closing caps shall be made up of high quality fiber reinforced plastic material the pins to be used shall be made up of 25mm of SAE8620 bright material the bearing shall be used of "6201zz" & "6205zz" permanent lubricated sealed bearing of requted brand (SKF/FAG) high tensile S.S. nut bolts shall be used for assembly. fundation cover closing cap shall be made from FRP Material with 0.7 mm thicknes the cerclips used for assembly shall be of of A24 and All the nylon bush shall be used for handle knob. the powder coating shall be done with pure polyester powders from ackzonoble or berger paints with 60 to 70 micron thickness. bolt M8x16mm nd nylock nut of MB shall be made of SS 304 used on nylon cap mounted on pins to protect bearings and pips from rain and dust all complete as per drawing, design, directions and apporval of engineer in charge regarding material, shape of equipment, colour metal, seat and pedal) and fixing of equipment etc

SEATED PULLER Providing and fixing of seated puller of size 1900mm (length) x 740mm (Width) x 1920mm (Height) fabricated with a center pipe is of 100NB shall be made from "C" class Gl. pipe Bottom support of M.S round plate of 250mm & 10mm thickness shall be welded All linkages shall be made up of 25NB "C" class G.1. pipe the handle frame of 32NB "C" class G.I. pipe the seat frame of 32NB "C" class G.1. pipe to build structure bushes to be used which shll be made from seamless pipe of 60mm O.D. and Smm thickness as well as 60mm diameter solid bar bush shall be made from center pipe og G.I. of 80NB "C" class welded with M.S. round plate of 250mm & 10mm thick. Main pipe shall be supported with 25mm X 25mm M.S. angles of 3mm thickness and 20mm X 40mm CRC square pipes of 3mm thickness. foundation cover costing cap shall be made from FRP Material the seats and back rests to be fitted on the outer frames shall be made up of M.S. sheet of size 330 mm X 300mmX2mm thickness and deep and ressed in tools and diles to have uniform radius of 20mm with no sharp closing caps shall be made up of high quality fiber reinforced plastic material pips to be used of diameter 25mm and 17mm shall be made up from SAE 8620 bright material the bearings shall be used of "620zz" and "6203zz" ermanent lubricated sealed bearing of requted brand (SKF/FAG) high tensile steel with galvanzed nuts & bolts shall be used for assembly, the cerclips to be used for assembly are of A16 the power costing shall be done with pure polyester powders of ackzonoble or berger paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and apporoval of engineer in Charge regarding material, shape of equipment Colour of metal, seat and pedal) and fixing of equipment etc.

SEATING & STNDING TWISTER providign and fixing of seating & standing twister of size 1700mm (Length) x 540mm(width)x 1250mm (Height) fabricated with a center pipe of 100mm NB shall be made from "C" class G.I. round pipe the M.S. round plate of 250 mm & 10 mm thickness shall be welded at bottom. handle and bottom sleeve pipe of 125mm OD with thickness 5mm should be provided for easy assembly, replacement and maintenance, the bottom frame of the seating & standing twister of 32NB 50 NB and 25 NB shall be made from "C"class G.I. pipe the handle frame of seating & standign twister of 25 NB & foot resting frame of seating side shall be made from "C" class G.I. pipe of 25mm NB the foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 80 NB "C" class welded with M.S. round plate of 250 mm & 10mm thick main pipe shall be supported with 25mm X 25mm M.S. angles of 3 mm thickness. and 20mm x 40mm CRCA square pipes of 3mm thickness, the twister plate to be fitted on the bottom frame shall be made up of M.S. round plate of size 300mm dimeter and 10mm thickness, closing caps shall be made up high quality fiber reinforced Plastic mterial, the pins to be used which shall be up of 35 mm SAE 8620 bright material, the bearings shall be made of fo "6205zz" permanent lubricated sealed bearing of reputed brand (SKF/FAG) high rensile steel with galvanized nuts & bolts shall be used for assembly the powder coating shall be done by pure polyester powder of berger paint with 60 to 72 micron thickness, all complete as per drawing, design, directions and approval of engineer-in-charge regading material, shape of equioment colour (of metal seat and pedal), and fixing of equipment etc.

PUSH UP BARS Providing and fixing of push up bars of size 1220mm (length) x 550mm (width) x 1700mm (Height) fabricated with the main frame of 100 NB shall be made from "C"class G.L. pipe the M.S. round plate of 250mm & 10mm thickness shall be welded at botto the handle frame of 25 NB shall be made from "C" class G.1. pipe the foundation shoud be used for fixing is a structure and shall be made from center pipe of G.I. of 80 NB "c" class welded with M.S. round plate of 250mm & 10mm thick, main pipeshall be supported with 25 mm X 25 mm M.S. angles of 3 mm thickness and 20mm X 40mm CRC square pipes of 3mm thickness. closing caps shall be made up of high quality fiber reinforced plastic material foundation cover closing cap shall be made from FRP material, High tensile steel with galvanized unts & bolts shall be used for assembly, the powder coting shall be done with pure polyester powders of ackzonoble or berger paints with 60 to 70 micron thickness. all complete as per drawing, design, directions and apporval of engineer-in-charge regarding material, shape of equipmetn colour (of metal, seat and pedal) and fixing of equipment etc.

POMMEL HORSE Providing and fixing of pommet horse of size 2150mm (Length) x 800mm (Width) x 800mm (Height) Fabricated with the main frame of 80NB and 50Nb shall be made from "C" class G.I. pipe the handle frame of 32NB Shall be made from "C" class 1.pipe 40mm x40mm CRC square pipes frame shall be placed on the 25mm x 25mm x 3mm M.S. Angle with 60 X 10m thickness flat should be used for support, Closing caps shall be made up of high quality fiber reinforced plastic material high tensile steel with galvanized nutsa nd bolts shall be used for assembly. the powder coating shall be done with pure polyester powder Ackzonoble or berger paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of engineer-in-charge regarding material, shape of equipment colour (of metal, seat and pedal), and fixing of equipment etc.

SIT BOARD DOUBLE providing and fixing of sit up board double of size 1760mm (Length) x 1140mm (width) x 660mm (height) fabricated with the main frame of 25mm NB shall be made from "C" class G.I. pipe FRP sheet of 3mm thickness shall be moulded on main frame the remaining frame of the sit up board of 32mm NB shall be made from "C" class G.I pipe the powder coating shall be done with pure polyester powder ackzonoble or berger paints with 60 to 70 micron thickness the foundation shoud be used for fixing as structure and shall be made from center pipe G.I. of 80NB "C" class welded with M.S. round plate of 250mm & 10mm thick. M.S. main pipe shall be supported with 25mm x M.S. angles of 3 mm thickness. and 25mmx40mm CRC square pipes of 3mm thickness all complete as per drawing design directions and approval of engineer-in-charge regarding material shape of equipment colour (of metal, seat and pedal) and fixing of equipment etc.

DOUBLE TWISTER STANDY Providign and fixing of bouble Twister standing of size 1500mm (Length) x 600mm (width) x 1300mm (Height) Fabricated with a center pipe of 100NB shall be made from "C" Class G.I. material the bottomshall be welded with support of M.S. round plate of 250mm & 10mm thickness. The bottom frame of 32NB shall be made from "C" class G.I. pipe handle frame of 25NB shall be made from G.I. pipe the foundation should be used for fixing is a structure and shall be made from center pipe of G.1. of 80 NB "C" class welded with M.S. round plate of 250mm & 10mm thick. Main pipe shall be supported with 25 mm x 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC squarepipes of 3mm thickness, the Twister plate to be fitted on the bottom frame shall be made up of M.S. round plate of size 300mm and 10mm thick. Closing caps shall be made up of high quality fiber reinforced plastic material pins to be used of diameter 35mm shall be made up from SAE 8620 bright material the bearings shall be used are of "6205" permanent fubricated sealed bearing of reputed brand heigh tensile steel with galvanized nuts and bolts shall be used for assembly the powder coating shall be done with pure polyester powders from ackzsnoble paints with 60 to 70 micron thickness. all complete as per drawing desing directions and approwal of engineer-in-charge regarding material shape of colour (of metal seat and pedal) and fixing of equipment etc.

CHEST PRESS Providing and fixing of chest press of size 200mm (Length) x 210mm (Width) x 220mm (Height) fabricated with the center pipe of 100NB shall be made up "C" class G.I. pipe the bottom shall be welded with support of M.S. round Plate of 250mm & 10mm thickness. the connecting pipe shall be made up from 25NB "C" class G.I.pipe the handle frame shall be made up from 32NB "C" class G.1. pipe to build structure bushes to be used which shal be made from MS seamless pipe of 60mm O.D and 5mm thickness as well as 60mm diameter sold bar bush shall be used the foundation should be used for fixing is a structure and shall be made from center pipe of G.I. pipe of 80 NB "C" class welede with M.S. round plate of 250 mm & 10mm thick. Main pipe shall be supported with 25mm x 25mm M.S. agnlcs of 3 mm thickness and 20mm X 40mm CRC square pipes of 3mm thickness the seats and back rests to be fitted on the outer frames shall be made up of M.S. sheet of size 330mm X 300mmX 2mm thickness and deep drawn and pressed in tools and dies to have unifonn radius of 20mm with no sharp edges. closing caps shall be made up of high quailty fiber reinforced plastic material foundation cover cap shall be made from FRP material with 0,7 thickness, pins to be used diameter 25mm and 17mm shall be made up from SAE 8620 bright material. bolt MBx16mm and nylock nut of MB shall be made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust, the bearings shall be used are of "6205ZZ" & 6203zz"permanent lubricated sealed bearing of reputed brand (SKF/FAG) high tensile steel with galvanized nuts & bults shall be used for assembly, the cerclips to be used for locking shall be made up of A24mm & A16mm the powder coating shall be done with pure polyster powder from Ackzonoble or Berger paints with 60 to 70 micron thickness) all con leter as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment colour (of metal. seat and pedal), and fixing of cquipment etc.

Designing, supply erection, commissioning and testing of heavy Foamming jet fountains having bunch of white foaming water 07 nos. Nozzle outside made out from Aluminium Alloy casted with inside ABS plastic moulded two piece assembly for smooth runnung white foaming jets water. Main Line made out from Surya/ Jindal/ Apolo or eq make in size of 2 inch B class Gl pipe line. Nozzle Mounted on ball joints assembly Alumimium Alloy casted inclusive of fountain nozzles each fully adjustable for a precision effect. Main Line Mainifould of Mild Steel dully Powder Coating. All Nut & bolts are G.1, PU Gaskets, pipe work, manifold nozzles made of precision machined brass including all final epoxy finishing work of pipe surface etc. Cable 3 Corex 2.5 sq mm copper 10 Mtr and for pump and 4 core x 1.0 sq mm copper 10 Mtr for Light of Polycab/Finolex/JMP or equilant. Material of construction of various components Manifold: MS of 10" dia. -Epoxy coated Pipe work: 2 inch Surya/ Jindal/Apolo or Eq make 14 ft long. Fittings Like Elbow, Tee, Sockets, Brass Ball Valve,Ball Joint, Hex connector, Nipples, Hex nipple etc Nozzle: Aluminum with Engineering Plastic(ABS). Mounting Stand: fabricated steel-galvanized/epoxy coating

Designing, supply erection, commissioning and testing of 5.0 HP X 01 Nos of Monoblock Openwell submersible pump of Kirlosker make AC 3 phase 220/240 Volt, 50 cycle, supply with foundation bolt, suction stainless steel mesh cover duly 10 Ft 3 core cable insulated of Polycab/RR/JMP/ finolex make.

Supply and fixing of 5.0 HP X 01 Pump panel box for above pumps of CRC 18 gauge steel sheet enclosure with front Double door type and Top hut type with back wall mounting type and provision for incoming & outgoing cable dully Powder Coated paint finish. Panel comprising 1 No main incoming 4 pole MCB, and 2 Pole MCB 01 Nos. Panel back up HRC fuse for pump circuit, Contactors unit with overload relay, Main Door Start stop push button switch with LED Red, Blue, Green, Indicator for phase Light. LED Light sequencer arrangement at main door with connection strips for Lights and Pump both. Contactors unit with overload relay, all accessories must be or Cat. I duly tested. Supplier has to privede Test certificate from National testing lab for IP55.

Designing, supply erection, commissioning and testing of water proof high power LED lighting system manufactured by ISO 2015 certified company make Premier/Syska/Fontasia/ S.L. Fountain make shall change the colours continually RGB and produce 16.7 million colours shall consist of 9watt(1wx9) 12 volt lights comprising high quality waterproof luminaries, wiring shall be reputed make double insulated PVC with copper conductor not less than 0.75 sq.mm connection shall be fully waterproof. Luminaries shall have die cast aluminium alloy bodies for strength and totally protected by fused epoxy polyester coating on all surfaces. The wall thickness of Luminaries not less than 5 mm. Light with Hi Power LED's and Hi Power Reflactive lens 45 degree mounted on MCPCB not less than 2.0 mm Aluminium. All external nuts bolt and studs of AISI 304 standard stainless steel. High Class PVC Cable Gland shall be IP 68. Supplier has to privede Test certificate from National testing lab for IP 68.

LED Light sequencer of Premier / Oasis / S.L.Fountain make to change the colour. Sequencer is fully equiped with in built SMPS for 220 volt to 12 Volt Operations 02 Nos for 12 Lights one sequencer and for 4 lights. Sequencer is operated with remote to adjust time of changing colour with function of fixed light each colour as required etc. Controller has on off switch with remote sensor in in front. Controller body made out from 20 gauge CRC sheet dully Powder Coated.

WAVE SLIDE Rec Age: 3-8 year The area: 2.2m* 6.0 m Safe play area: 3.7m*2.1 m HIGHT: 3.654M In the mini wave slide the center support is made up of 80NB pipe. The slide portion is made in Fiberglass reinforced plastic. The thickness of the mini slide is 5mm with proper reinforcement to support the module. The trainforcement to support the module. The tringular steps of the slide are of 16 SWG and ladder frame is made in 25 NB powder coated Gl pipe. The ladder is designed in such a way ther won't be entrapment of childs foot while playing. All the sharp edges and corners properly grinded to give

ARCH SWING DOUBLE SEATER Rec Age: 4-14 year The area: 3m 1.5 m Safe play area: 4*3.5 m The arch shaped side frame of the swing is made up of 80NB GI pipe and top 2 pipe is made up of 50 NB GI pipe. The frame is powder coated to give an ersthetic look. The two swings are made up 10 mm thick antiskid chequered reinforced rubber top. The belt seat is suspended on 6 mm rubber coated GI chain. The ball bearings are mounted inside a specially designed nylon clam

FOUE BOARD SEE - SAW Rec Age: 3-10 year The area: 3m 0.5 m Safe play area: 4*1.5 m The Ms See saw comprises four FRP seats The lever is consisted of 20 nb and 80 nb powder coated gi pipes. The bearing used in this item is heavy duty nylon bush type. The stand for see saw made using 50 NB Gi Pipe

TARZEN SWING Rec Age: 4-14 year The area: 3m 1.5 m Safe play area: 4*3.5 m The arch shaped side frame of the swing is made up of 80NB GI pipe and top pipe is made up of 50 NB GI pipe. The 4 frame is powder coated to give an ersthetic look. The two swings are made up 10 mm thick antiskid chequered reinforced rubber top. The belt seat is susended on 6 mm rubber coated GI chain The ball bearings are mounted inside a specially desingned nylon clamp

Brick work with FPS bricks of class designation 75 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Cement plastering including T&P, scaffolding, material and complete labour, including cost of water, curing, racking of joints etc. with 12 mm cement plaster of mix : including Providing /mixing of synthetic fibers compulsorily complying with IS 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of Cement i.e. 125 gms per 50 kg Cement up to 900 gms per cum of Concrete/ mortar 1:4 (1 cement : 4 fine/ coarse sand)

Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).