Local Self Government Department Tender

Providing and laying factory made chamfered edge ISI approved Cement Concrete paver blocks of Category "B" (dentated only two sides like I, Z or T shape) made by table vibratory method or automatic stationery hydraulic vibro pressed machine, to attain superior smooth finish unsing PU or equivalent moulds, laid in required colour and pattern over 25-50 mm thick compacted bed or coarse sand of required gradation as per specifications, compacting and proper embedding/ laying with vibratory compaction using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc. as per manufacturer's specifications and directions of Engineer-in-charge. Providing and laying of interlocking concrete block (M-30 Grade) payements as per IRC:SP:63 having thickness 80 mm as per drawing and technical specifications.

Cement plastering including T & P , scaffolding, material and complete labour, including cost of water, curring, racking of joints etc. with 12 mm cement plaster of mix 1:6 (1 cement : 6 fine/coarse sand)

Centring and shutering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete.

Reinforcement for RCC work at all levels including straigtening, cutting, bending, placing in position and binding all complete cold twisted bars

Providing and laying un-reinforced, dowel jointed, plain cement concrete mix With Concrete Mixer & vibrator pavement over aprepared sub base with 43 grade cement, coarse and fine aggregate conforming to IS : 383, maximum size of coarse aggregat not exceeding 23 mm, mixed as per approved mix design, laid, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filter, separation membrance, sealant primer, joint sealant, debonding strip, admixtures (if required) as approved, curing compound, finishing to lines and grades complete as per drawing and as per clause 602, 112 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion.

For R.C.C. 1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 Stone Aggregate)