Local Self Government Department Tender

DOUBLE TWISTER STANDING Providing and fixing of Double Twister Standing of size 1500mm (Length) x 600mm (Width) x 1300mm. (Height) fabricated with a Center Pipe of 100NBshall be made from “C” Class G.I. material. The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from “C” class G.I. pipe. The handle frame of 25NB shall be made from “C” class G.I. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 80 NB”C” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. The Twister plate to be fitted on the bottom frame shall be made up of M.S. Round Plate of size Ø300mm and 10mm thick. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. Pins to be used of Diameter 35 mm shall be made up from SAE 8620 bright material. The bearings shall be used are of “6205zz” permanent lubricated sealed bearing of reputed. Brand. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc

Push up bar • DIMENSIONS: ‐ 1220mm (Length) x 550mm (Width) x 1700mm. (Height). • SAFE AREA: ‐ 2Mtr x 1Mtr.Push up bar equipment made from “C” class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. The main frame of 100 NB made from “C” class G.I. pipe. The M.S. round plate of Ø250 mm & 10mm thickness is welded at bottom. The handle frame is of 25 NB made from “C” class G.I. pipe. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “C” class Welded with M.S. 12 g p p round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps are made up of high quality Fiber reinforced Plastic material. Foundation cover Closing Cap is made from FRP Material with 0.7 mm Thickness. High tensile steel with galvanized nuts & bolts are used for assembly. The powder coating done with Pure Polyester powders of Ackzonoble or Berger Paints with 60 to 70 micron thickness.

Cycle • DIMENSIONS: ‐ 1570mm (Length) x 570mm (Width) x 900mm. (Height). • SAFE AREA: ‐ 2.5Mtr x 1.5Mtr.Cycle equipment made from “C” class G.I. Pipe of different NB. (NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters). The main frame of 50 NB made from “C” class G.I. pipes. M.S. round plate of Ø300mm & 10mm thickness used to form a paddle assembly. is of 25NB made from “C” class G.pipe The handle frame C I. The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. For foundation 32NB “C” class G.I. pipe used. Closing Caps are made up of high quality Fiber reinforced Plastic material.Pins used of Diameter 25mm are made up from SAE 8620 bright material. Pins used of Diameter 13mm are made up from EN8 material with CRCA pipe 20X20mm of thickness 3.00mm for paddle assembly. The bearings used are 6001zz & 6205zz permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts and bolts are used for assembly. circlip used for assembly are of A24 type. The powder coating done with Pure The Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness