Local Self Government Department Tender

Supply of strainer pipes made of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS:8110-1985 of following nominal bore sizes at site of work .150 mm dia

SITC of Radial / mixed flow ISI marked water and anti-corrosive liquid filled submersible motor pump sets suitable for 100/150mm dia borewell. The size of adopter fixed on top of the motor should exceed the top of coupler , for safegaurd the coupler. The construction material of motor and pump should match IS: 8034 : 2018 and IS: 9283 guideline. The radial flow pumpset should operate at 5 star energy efficiency level of BEE and mixed flow pump set should operate at 3 star energy level of BEE, accompained by valid BEE certificate. Motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011 with required accessories including making connection suitable for Bore well. The job includes labour part of lowering of riser pipe G.I./ H.D.P.E. with rope, cables & pump, installation of complete fitting and accessories, jointing of electrical cables up to Starter. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect.2.0 HP, 1-Ø, (7- 95)Mtr, (55-22) LPM

Providing & Fixing of HDPE pipe ISI mark (IS:4984/2021 ) for water supply (suitable for submersible & jet pump) with required fittings 40 mm OD 6 kg / cm2

SITC of Contactor OEM Fabricated DOL/Star-Delta Starter panel with switchgear selection as per Type-2 Cordinatiom Chart and made out from 1.6 mm thick powder coated CRCA sheet, enclosure comprising of over load protection relay, short circuit & single phasing protection, Illuminated ON / OFF push buttons, ammeter, voltmeter, indicating lamps etc. suitable for following rating motors complete in all respect.2.0 HP to 3.0 HP (DOL starter)

Providing & Laying of synthetic rope for submersible pump ISI marked (IS:5175) of following sizes.12mm (suitable up to 50 mm OD pipe)

Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Unarmoured/ Armoured aluminium cable of 1.1 KV grade of IS 7098-I/1554-I approved make in ground as per IS 1255 including excavation of 30 cm x 75 cm size trench, 25 mm thick under layer of sand, IInd clas bricks covering refilling earth, makeing nesessary connectiontesting, 10 sq mm four core

P/Laying ISI marked P.V.C. insulated submersible cable confirmingto IS:694 with flexible copper conductor including making connectionetc. as required 4.0 Sq.mm 3 core flat

Supply and fixing of tube well cover of M.S. sheet (6mm thick) withnuts and bolts complete for casing size: 150 mm dia