Local Self Government Department Tender

Supply, Delivery, Installation and Commissioning of SHOULDER CUM CHEST PRESS with prime stand pipe shall be minimum of 80 mm NB diameter of thickness not less than 3.00 mm, Handle frame & Seat frame shall be minimum of 32 mm NB diameter of thickness 2.60 mm with Rubber grips on end & Connecting links shall be minimum of 25 mm NB diameter of thickness 2.40 mm are of 'B' class heavy grade of TATA/JINDAL/BHUSHAN make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded. The two handle frames are hinged over 80 NB prime stand pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance free ball bearing. Seat & Back rests are made with the HDPE plastic with uniform bending radius to avoid sharp edges. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system &ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & ISO. Supply, Delivery, Installation and Commissioning of LEG LIFT POST with prime pipes shall be minimum of 80 mm NB diameter of thickness 3.00 mm, Connecting link pipes shall be minimum of 25 mm NB diameter of thickness 2.40 mm and Handle shall be minimum of 25 mm NB diameter of thickness 2.40 mm with Rubber grips on it are of 'B' class heavy grade of TATA/JINDAL/BHUSHAN make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system &ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & ISO.

Supply, Delivery, Installation and Commissioning of LEG LIFT POST with prime pipes shall be minimum of 80 mm NB diameter of thickness 3.00 mm, Connecting link pipes shall be minimum of 25 mm NB diameter of thickness 2.40 mm and Handle shall be minimum of 25 mm NB diameter of thickness 2.40 mm with Rubber grips on it are of 'B' class heavy grade of TATA/JINDAL/BHUSHAN make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system &ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & ISO.

Supply, Delivery, Installation and Commissioning of AIRWALKER DOUBLE with three prime stand pipes shall be of 80 mm NB diameter of thickness 3.00 mm, Pedestal frame shall be minimum of 32 mm NB diameter of thickness 2.60 mm & Handle frame shall be minimum of 25 mm NB diameter of thickness 2.40 mm are of 'B' class heavy grade of TATA/JINDAL/BHUSHAN make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded. The two pedestal frames are hinged over 80 NB prime stand pipes with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance free ball bearing. Foot rest shall be made of UV stabilized poly propylene co-polymer. All pipes shall be uniformly powder coated up to minimum 120 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by polypropylene plastic/nylon polyamide caps up to 4 mm thickness for safety against entrapment, corrosion & water resistant. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms, ISO 9001:2008 International standard for quality management system &ISO 14001:2015 International standard for environmental management system and to be produced proof of valid certificate conformity to EN 16630 & ISO.