Jodhpur Vidyut Vitran Nigam Limited Tender

Random Rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in :Cement Mortar 1:6 ( 1-Cement : 6-Sand).Wall upto 30cm. and less thickness. (B-69/6.2.6+6.3.4)

Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 25mm thick (B-139/12.3.1)

Providing & fixing precast cement concrete copying 1:2:4 mis 50mm thick complete as per specification : -- 50mm -- (B-56/3.8)

Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding:New work (Two or more coats applied @ 3.84 kg/10 sqm). (B-145/12.41.1)

Add extra for facing as per design and detailed specifications including additional cost of stones Course rubble facing Second sort.(B-70/6.4.2)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: (B-98/9.2)

Providing and laying of paver block as per IS 15658 : 2006 (Indian standard for precast concrete block for paving- specification) and IRC : SP:63-2004 (guidelines for the use of interlocking concrete block pavement)M-40, 80mm thick to be used in medium-traffic, (medium traffic is defined as A daily traffic of 150-450 commercial vehicle exceeding 30 KN laden weight or and equilant of 0.52 to 2.0 MSA for a design life of 20 years) like city, streets, small and medium market, roads, low volume roads, utility cuts on arterial roads etc. Catergy C not denated on any its face like hexagon, rectangular, square shape as per IRCSP 63: 2004 (B-136/11.38.3 C)

Providing and laying coment concrete Kerb stone of different sizes in M-30 grade (Manufacture with fully mechanised dry cast process with forced action mixer whose arms revolve along the main axis and rotate about its own axis also, having humidity sensor for moisture controal of w/c ratio in concrete mix. manufactured with steel moulds (Milled and manufactured in CSI diamond of CSI Nitro process for accuracy) on steel base plate of min 16 mm thick, Having Vibration and pressing action both together with the help of multiple synchronised vibrators. power of hydraulic station should be minimum 50 KW for compaction and cured in controlled chambers having humidity control and automated air circulation system) in position to the required line, level and curvature jointed with cement mortar 1:3 (1 Cement : 3 Corse sand) including making of joints, drainage opening wherever required. (B-208/17.21)

Suppling & laying and Transporation of gravel mooram binding material having PI not less then 4 to 6 complete in required grade and camber including all lead and lift.Appd. by DY. CE (Civil) Ju. Vide order No. 1903 dt. 23.02.2023

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 75 mm thick with 20mm thick nominal size aggregate. (B-128/ 11.3.1)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work (B-146/12.46.1)

Supplying and fixing Soorsagar Bhura or Equivalent ashlar sills, lintels and dassa, bearing, bed & top surface made perfenctly even, jambs, skirting steps etc. rough dressed: Above 20 cm. thick (pats) & upto 2.15 m length (B-74/6.27.3)

Earth work in filling at site with soil free from vegetation & organic material including Execavation cost of material, loading carriage, unloading, compacted with manual/mechanical means & levelling top sufrace evenly as per direction of Engineer incharge with all lead & lift. Appd. by DE. ce (Civil) Ju. vide orde No. 1903 dt. 23.02.2023