Jaipur Vidyut Vitran Nigam Limited Tender

B-12/12.22:-Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete

B-12/12.39.1:- Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:(A) New work (two or more coats) over and including scrapping and priming coat with cement primer.

B-12/12.45: Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect.

(6.2.6/B6) Random Ruble Stone masonry with hard stone in super structure above plinth level and upto five level above 30 cm thick Walls in Cement Mortar 1:6 (1-Cement: 6-Sand).

(6.3.1/B-19) Add extra for RR stone masonary with hard stone in square or rectangular pillers.

(12.32.2/B-12) Pointing on stone masonry in cement sand mortar 1:3 ( I cement 3 sand) Raised and cut pointing

(12.48.1/B-12) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Tow or more coats on new work.

(10.22/B-10) Providing Gola 75mmX75mm in cement conc. 1:2: 4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gague) i/c finishing with cement mortar 1:3 (1 cement : 3 fuine sand as per standard design.

(3.8/B-3) P/F precast cement coping 1:2:4 mix 50 mm thick complete as per specifications 50mm

S-2/2.2.3:- P&F GI pipes (external work) with GI fitting (IS:1239 mark) including trenching and refilling earth etc: 15 mm dia nominal bore.(a) 25 mm dia nominal bore. B Class

S-2/2.3.1:- Making connection of GI distribution branch with GI main including all fitting : Upto 25mm dia

(S-2.11.1):- P&F ball cock (IS : 1703 mark) with rod& PVC ball complete: Brass wt. 400gm 15mm.

S-2/2.15:- P&F Full way valve (IS: 778 mark) or wheel valve of approved make.(A) 2.15.3:- Gunmetal 25 mm nominal bore

S-2/2.32:- Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size :(A) 2.32.3:- 25mm dia nominal bore

S-2/2.26.5:- P&F PVC storage tank (IS: 12701 marked including the BIS license No.) of approved make with cover,25 mm dia IM long over flowing & 25 cm. Long wash out pipe with plug & socket, including making connection etc. Complete of approved deisgn : 1000 liters capacity.

B-4/4.9:- Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc.

B-4/4.1:- Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix

B-11/11.3.2:- Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 75mm thick with 20mm thick nominal size aggregate.

B-12/12.3:- Plaster on new surface on walls in cement sand morter 1:6 including racking of joint etc. Complete fine finished (a) 12.3.2 :- 20 mm thick.

(B-13.1):- Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead : With cement mortar 1 :4 ( 1 cement : 4 coarse sand)

E301500:- P&F 1200mm sweep BEE 5 star rated double ball bearing capacitor start, aluminium body & blade ceiling fan complying to IS 374:1979.1?p 50 watt at max speed & 230 volt, air delivery210CMM, Speeed 330 RPM with down rod upto 30 cm with 3x1.5 sqmm pvc insulated flexible copper condutor making connection testing etc. as required.

B-16/16.12:-Providing and fixing vertical Blinds , headrail shall be oriented aluminum alloy 50 mm vide x 18 mm high the thickness shall be 1.2 mm. Control unit shall be made of high grade polymer and shall be housed in side the headrail, which shall transfer motion from chain tilter to tilt rod. Chain tilter shall be made of plastic bead of diameter 4.5 mm through which 2 mm thick polyester code passes. Tilt rod shall be extruded aluminum having 3 key ways. Runner shall be moulded plastic and shall have to plastic wheels mounted on plastic exles to enable runner to slide unhindered in headrail. Luver shall be made of fabric 100 mm colour fast and shall have protective scotchgard coating to resist stains and dust. Bottom mechanism consist bottom weight made of powder coated galvanized steel for maximum corrosion resistance. The bottom weight shall be attached with bottom.