Jodhpur Development Authority Tender

LEG PRESS • DIMENSIONS: - 1840mm (Length) x 360mm (Width) x 1560mm. (Height). • SAFE AREA:- 2.8 x 1.4Mtr. • Leg Press equipment made from "C" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The center pipe is of 100mm NB made from "C" Class G.I. pipe. • The Sleeve frame is of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve can be disassembled from main frame. • The bottom support of M.S. round plate of 0250 mm & 10mm thick. • The remaining outer frame is of 32NB made from "C" class G.I. pipe. • The foundation used for fixing is structure and made from center pipe of G.I. of 80mm NB "C" class welded with M.S. round plate of 0250mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angle of 3 mm thickness and 20mm x 40mm CRC square pipe of 3mm thickness. • Seat & Back rest provided are made up of MS deep draw quantity of 2mm thickness with no joint with uniform outer edge radius 20mm. • The footrests are made from tasted Aluminum material, having sizes 130mm X 310mm X 5mm thick. With the support of 310mm X 130mm X 3mm thick MS plate. • The frame of footrests made up of 25 NB "C" class G.I. pipe. • Closing Caps are made up of high quality Fiber reinforced Plastic material. • To build structure bushes are used which are made from M . S . seamless pipe of 50mm O.D. and 5mm thickness. • The pins used are made up of 025 mm SAE 8620 bright material. • The bearings used are of "6205zz" permanent lubricated sealed bearing of reputed Brand. • High tensile steel with galvanized nut bolts are used for assembly. • The cerclips used for assembly are of A24 mm. • The powder coating done with Pure Polyester powder of Ackzo n o b le or Berger with 60 to 70 micron thickness.

SIT UP BOARD DOUBLE • PRODUCT DIMENSIONS: - 1760mm (Length) x 1140mm (Width) x 660mm (Height). • SAFE WORKOUT AREA: - 2500mm (Length) x 1600mm (Width). • The Sit up Board double made from "C" Class GI pipe. Center column made from 100mm NB "C" class G.I. Pipe. • The main frame is of 25mm NB made from "C" Class GI pipe. FRP sheet of 3mm thickness is molded on main frame. • The remaining frame of the sit up board is of 32mm NB made from "C" class GI pipe. • The powder coating is done with Pure Polyester powder Ackzonoble or Berger Paints with 60 to 70 micron thickness. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB "C" class Welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness.

SEATING & STANDING TWISTER • DIMENSIONS: - 1700mm (Length) x 540mm (Width) x 1250mm. (Height). • SAFE AREA: - 3 Mtr x 1Mtr. • Seating &Standing Twister equipment made from "C" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The Center Pipe is of 100mm NB made from "C" Class G.I. Round Pipe. • The M.S. round plate of 0250 mm & 10mm thickness is welded at bottom. • Handle and Bottom sleeve pipe of 125mm OD with thickness 5mm provided for easy assembly, replacement and maintenance. • The bottom frame of the Seating & Standing twister is of 32 NB, 50 NB, and 25 NB made from "C" class G.I. pipe. • The handle frame of Seating & Standing twister is 25 NB & Foot resting frame of seating side is made from "C" class G.I. pipe of 25mm NB. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB "C" class, Welded with M.S. round plate of 0250 mm& 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRCA square pipes of 3mm thickness. • The Twister plate fitted on the bottom frame is made up of M.S. Round Plate of size 300mm diameter and 10mm thickness. • Closing Caps are made up of high quality Fiber reinforced Plastic material. • The Pins used are made up of 0 35 mm SAE 8620 bright material. • The bearings used are of "6205zz" permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nuts & bolts are used for assembly. • The powder coating is done by Pure Polyester powder of Berger Paint with 60 to 70 micron thickness.

Seated Puller • DIMENSIONS: - 1900mm (Length) x 740mm (Width) x 1920mm. (Height). • SAFE AREA:- 1.2Mtr x 3Mtr • Seated puller equipment made up of "C" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The center pipe is of 100NB made from "C" Class G.I. pipe. • Bottom support i s of M.S. round plate of 0 250 mm & 10mm thickness is welded. • All linkages are made up of 25NB "C" class G.I. pipe. • The handle frame is of 32NB "C" class G.I. pipe. • The seat frame is of 32NB "C" class G.I. pipe, • To build structure bushes are used which are made from seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB "C" class. Welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. • Foundation cover Closing Cap is made from FRP Material with 0.7 mm Thickness. • The seats and Back rests are fitted on the outer frames a r e made up of M.S. Sheet of size 330 mm X300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. • Closing Caps are made up of high quality Fiber reinforced Plastic material. • Pins used of Diameter 25mm and 17mm are made up from SAE 8620 bright material. • The bearings used are of " 6205zz" and "6203zz" permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nuts & bolts are used for assembly. • The cerclips used for assembly are of A16 • The powder coating done with Pure Polyester powders of Ackzonoble or Berger Paints with 60 to 70 micron thickness.

THI-CHI SPINNER (2 WHEEL) • DIMENSIONS: - 700mm (Length) x 1000mm (Width) x 1280mm (Height). • Safe Area:- 1.9Mtr X 1.9Mtr • Thai chi spinner Equipment made up of "C" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. • The center pipe is of 100NB made up of "C" Class G.I. pipe. • The handle movement round frame is made up from 25 NB "C" class G.I. pipe • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB "C" class Welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. • Closing Caps are made up of high quality Fiber reinforced Plastic material. • The pins used are made up of 0 25 mm of SAE8620 bright material. • The bearing used is "6201zz" &"6205zz" permanent lubricated sealed bearing of reputed brand. • High tensile S. S. nut bolts are used for assembly. • Foundation cover Closing Cap is made from FRP Material with 0.7 mm thickness. • The cerclips used for assembly is of A24 and All. • The nylon bush is used for handle knob. • The powder coating done with pure Polyester powders from Ac kzo n o b I e or Berger Paints with 60 to 70 micron thickness. • Bolt M8X16 mm and Nylock nut of M8 made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust.

BACK EXTENSION DIMENSIONS: - 1400mm (Length) x 700mm (Width) x 820mm (Height). SAFE AREA: - 2.4Mtr x 1.7Mtr. Back Extension Equipment made from "c" G.I. Pipe of different NB pipe. (NB stands for Nominal Bore i.e. Internal Diameter of pipe in mm). The main frame is of 50mm NB made from "c" Class G.I. pipe. The Foot resting frame of 32mm NB made from "c" Class G.I. pipe. The handle frame is of 25NB made from "c" Class G.I. pipe. The seat fitted on the outer frames i s made up of M.S. Sheet of size 330mm X 300mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. The foundation used for fixing is consists of 50mm NB made from "c" Class G.I. pipe. The footrests are made from casted Aluminum material, having sizes 130 x 310 x 5 mm thick. With the support of 250mm X 115mm X 3mm thick MS plate. The powder coating done with Pure Polyester powder o f Ackzonoble or Berger with 60 to 70 micron thickness.