Jaipur Vidyut Vitran Nigam Limited Tender

4.1 Providing & Laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement : 3-Course sand) and making good the joints and cost of plastizers( If required)excluding the cost of centering, shuttering and reinforcement. M-20 grade nominal mix / design Mix..

4.3 Providing & Laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement : 3-Course sand) and making good the joints excluding the cost of centering, shuttering and reinforcement for Beams, suspeded floors, girders having slope upto - 15o landings, balconies, shelves, chajjas lintels, bands, plain windows, sills, staircases and spiral staircases M-20 grade nominal mix / design Mix.

4.9 Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation in basements rafts, footings, straps beams, bases of columns etc.

4.13.2 Providing & fabricating reinforcement for R.C.C work including straightening, cutting, bending, placing, in position, and binding (i/c cost of binding wire) all complete up to floor three level Hot rolled deformed bars (IS-1139)

10.34 Providing and fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture as per direction of Engineer-in-charge of size 595 X 595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @120 grams per sqm) consisting of main ‘T’ runner suitably spaced at joints to get required length and size of 24X38mm made from 0.33 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24X32mm made out of 0.33mm (Minimum) sheet, 1200mm long spaced between main ‘T’ at 600mm centre to centre to form a grid of 1200X600mm and secondary cross ’T’ of length 600mm and size 24X32mm made out of 0.33 mm thick (Minimum) sheet to be interlocked at middle of the 1200X600mm panel to form grid of size 600X600mm resting... ...on periphery walls/partitions on a perimeter wall angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick densified edged calcium silicate ceiling tiles of approved texture in the grid including cutting /making opening for services like diffusers, grills, light fitting, fixtures, smoke detectors etc., wherever required, Main ‘T’ runners to be suspended from ceiling using 50 mm long M 6 dash fasteners, 6mm G.I. fully threaded rods with galvnised steel L cleat level adjusters of size 80x25x2mm, spaced at 1200mm centre to centre long main ‘T’ bottom exposed with 24mm of all T-sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawing and as directed by engineer-in-charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs)having area less than 0.30 Sqm. The calcium silicate ceiling tiles shall have NRC. Value 0.50 (Minimum), light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity = 0.043