Jaipur Development Authority Tender

Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT & H Specifications Clause 509 complete in all respects. for Grading-II (13 mm nominal size) Bitumen (VG-30)

Removing & Refixing of precast concrete interlocking paving blocks recovered item from site 60 mm to 100 mm thick laid on average 50 mm thick bed of coarse sand joint be filled with fine sand laying procedure on compacted sub base as define etc. complete as per direction of Engineer-in-charge with all lead and lift.

Removing and Refixing of Pre cast Kerb stone obtained from site and fixing at as per direction of engineer-in-charge over 100 mm thick C.C. 1:4:8 and jointing of kerbs with cement morter 1:4 including cost of loading unloading transporting and curing complete in all respect as per direction of Engineer-in-charge. As Per Order No. JDA/TA to DE/07/D-1129 Dated 01/03/2007 Approved by Director (Engineering)

P & F of cement concrete precast kerb or dand of M-20 grade upto 60 cm length over 20 mm thick base of cement mortar 1:6 including earth work, cutting of B/T road, cutting of WBM road etc. & jointing with cement mortar 1:4 grouted 125 mm in ground of shape as approved by Engineer-in-charge. The rates are inclusive of providing, laying and compacting base concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate of 20 mm thick nominal size) 100 mm thick below dand/kerb complete in all respect. The size of kerb be 15 cm x 32.5 cm with round at top.

"providing and fixing of precast concrete interlocking blocks of M-30 grade manufactured from fully computerized automatic stationary hydraulic vibro pressed machine & with weight batcher of class A-2 as per BS: 6717-2001 . The C.C. interlocking paving blocks be laid on average 50 mm thick bed of course sand and the joint is to be filled with the fine sand , laying procedure on compacted sub case as defined. The rates are inclusive of earthwork , cutting ogf BT road , cutting of WBM road etc. and disposal of unserviceable material with all leads & lifts and stacking of serviceable material .Complete job is to be executed as per the interlocking of engineer in charge . The rates to be inclusive of all load , lifts & taxes. General specification of Blocks : 1. Shape : As specified by engineer in-charge. 2. Tensile splitting strength and breaking loads as per BS6717-2001 3. Colour : Grey cement natural colour. 4. Variation in Dimension : Less than 1.6 mm 5. Variation in thickness : Less than 3.2 mm" 6. Abrasion : As per BS : 6717 - 2001 For interlocking block 60 mm thick

Beldar

P/F of rumble strip made out of strong ABS (Acrylonitrile Butadiene styrene ) material which is UV stabilized & high mode composition material to be server impact with reflectorised with high reflective 10mm glass beads having built in 2 holes for fixing with specially designed with specially designed steel pins 12mm dia , rumble is to be installed with high quality epoxy & steel pairs dimensions are length 250mm , width 150mm ,height 30mm